UL Prospector

成功!

成功保存搜索結果
99.99% Conductive Shining Flake Silver Powder Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起
99.99% Conductive Silver Powder (Spherical) Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications.
Acetylated Distarch Ddipate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive.
Acetylated Distarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起
Alkylsulfonic Acid Ester of Phenol Plasticizer Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC.
Cardanol Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起
Chlorinated Rubber TR1-CR-1 Fujian Wantaixing Chemical Development Co., Ltd. Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展開 Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起
Chlorinated Rubber TR1-CR-2 Fujian Wantaixing Chemical Development Co., Ltd. Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine...展開 Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起
Chlorinated Rubber TR1-CR-3 Fujian Wantaixing Chemical Development Co., Ltd. Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marin...展開 Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起
Chlorinated Rubber TR1-CR-4 Fujian Wantaixing Chemical Development Co., Ltd. Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展開 Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起
Fumed Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起
H0201 Long Kou Windstar Chemical Co., Ltd. H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0301 Long Kou Windstar Chemical Co., Ltd. H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0601 Long Kou Windstar Chemical Co., Ltd. H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0801 Long Kou Windstar Chemical Co., Ltd. H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0806 Long Kou Windstar Chemical Co., Ltd. H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0901 Long Kou Windstar Chemical Co., Ltd. H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0902 Long Kou Windstar Chemical Co., Ltd. H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0903 Long Kou Windstar Chemical Co., Ltd. H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0904 Long Kou Windstar Chemical Co., Ltd. H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0905 Long Kou Windstar Chemical Co., Ltd. H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0906 Long Kou Windstar Chemical Co., Ltd. H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
Hydroxypropyl Aistarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive.
MPI Bright 100 MPI Chemie B.V. MPI Bright 100 is an optical brightener in the form of a yellowish powder. It is used as a whitening agent in paints and inks. MPI Bright 100 is designed to brighten colors and mask yellowing in desired applications.
MPI Bright 200 MPI Chemie B.V. MPI Bright 200 is an optical brightener in the form of a bright yellow crystal powder. It is used as a whitening agent in paints and inks. MPI Bright 200 is designed to brighten colors and mask yellowing in desired applications.
MPI Bright 300 MPI Chemie B.V. MPI Bright 300 is an optical brightener in the form of a yellowish-green powder. It is used as a whitening agent in paints and inks. MPI Bright 300 is designed to brighten colors and mask yellowing in desired applications.
MPI Bright 420 MPI Chemie B.V. MPI Bright 420 is an optical brightener in the form of a yellowish green crystalline powder. It is used as a whitening agent in paints and inks. MPI Bright 420 is designed to brighten colors and mask yellowing in desired applications.
MPI Bright 450 MPI Chemie B.V. MPI Bright 450 is an optical brightener in the form of a yellowish green crystalline powder. It is used as a whitening agent in paints and inks. MPI Bright 450 is designed to brighten colors and mask yellowing in desired applications.
MPI Bright CBS-X MPI Chemie B.V. MPI Bright CBS-X is an optical brightener in the form of a yellowish crystal powder. It is used as a whitening agent in paints and inks. MPI Bright CBS-X is designed to brighten colors and mask yellowing in desired applications.
MPI Bright ER-1 MPI Chemie B.V. MPI Bright ER-1 is an optical brightener in the form of a yellowish crystal powder. It is used as a whitening agent in paints and inks. MPI Bright ER-1 is designed to brighten colors and mask yellowing in desired applications.
MPI Bright ER-2 MPI Chemie B.V. MPI Bright ER-2 is an optical brightener in the form of a pale yellow powder. It is used as a whitening agent in paints and inks. MPI Bright ER-2 is designed to brighten colors and mask yellowing in desired applications.
MPI Bright ER-3 MPI Chemie B.V. MPI Bright ER-3 is an optical brightener in the form of a yellowish green crystal powder. It is used as a whitening agent in paints and inks. MPI Bright ER-3 is designed to brighten colors and mask yellowing in desired applications.
MPI Bright FP 127 MPI Chemie B.V. MPI Bright FP 127 is an optical brightener in the form of a light yellow powder. It is used as a whitening agent in paints and inks. MPI Bright FP 127 is designed to brighten colors and mask yellowing in desired applications.
Methyltriethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起
Methyltrimethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起
Milecell 60 HPMC MPI Chemie B.V. Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water ...展開 Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起
Milecell 65 HPMC MPI Chemie B.V. Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water ...展開 Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起
Milecell 75 HPMC MPI Chemie B.V. Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water ...展開 Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起
Milecell EC Standard MPI Chemie B.V. Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and c...展開 Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起
Modified Starch - Compound Active Printing Paste Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
Modified Starch - High End Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起
Modified Starch - Mid Range Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
ND-22 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent.
Nano Silver Powder TFNP-30 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry.
Nano Silver Powder TFNP-80 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material.
PVB Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起
PVC Paste Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起
Polurene FP75 S.A.P.I.C.I. SpA Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates.
Polurene IR 51 AE S.A.P.I.C.I. SpA Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates.
Polurene IR 51 K S.A.P.I.C.I. SpA Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product prime...展開 Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product primer or overprint varnishes. 收起
Polurene OK K S.A.P.I.C.I. SpA Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties.
Polurene OK.D AE S.A.P.I.C.I. SpA Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...展開 Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. 收起
Polurene T 70 AE S.A.P.I.C.I. SpA Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings w...展開 Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings with good chemical and weather resistance. This product contains less than .5% IPDI isocyanates. 收起
Polurgreen FP75-01 S.A.P.I.C.I. SpA Polurgreen FP75-01 is a polyurethane adduct. This product contains less than .1% TDI isocyanates. It may be used in 2K adhesives and inks. Polurgreen FP75-01 is in accord with EU, BFR, and FDA regulations for food packaging.
Precipitated Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起
Rexin K 1939 S.A.P.I.C.I. SpA Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...展開 Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. 收起
Rexin K 411 S.A.P.I.C.I. SpA Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for ...展開 Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for prolonged and continuous use. 收起
Rexin K 6258 S.A.P.I.C.I. SpA Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes.
Rexin K 6302 S.A.P.I.C.I. SpA Rexin K 6302 is a polyester resin. This product is soluble in ethyl acetate. It can be used in the formulation of inks and overprint varnishes.
SCA-Y25E Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起
SCA-Y25M Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起
SILICONE FLUID ATPN-100 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起
SILICONE FLUID ATPN-1000 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起
Silane ATPN-1100 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起
Silane ATPN-1110 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起
Silane ATPN-1120 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起
Silane Coupling Agent Si-69 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起
UVB2000 Special Tertiary Amine Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...展開 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 收起
UVB2200 Reactive Amine Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...展開 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. 收起
UVE3216 Modified Epoxy Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...展開 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. 收起
UVU 6451 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications.
UVU6219 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...展開 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. 收起
UVU6305 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...展開 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. 收起
UVU6609 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications.
UVU6906 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications.
Ucopol M 33/65 K S.A.P.I.C.I. SpA Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overpr...展開 Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overprint varnishes and flexographic processes. 收起
Ucopol OL 100 S.A.P.I.C.I. SpA Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing ink...展開 Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing inks and pigmented pastes. This product has been obtained from renewable raw materials. 收起
VISIOMER® 1,4-BDDMA Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent for the free radical polymerization, and as adhesion promoter and hardener for PVC plastisols, and a coagent for peroxide crosslinking of elastomers...展開 VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent for the free radical polymerization, and as adhesion promoter and hardener for PVC plastisols, and a coagent for peroxide crosslinking of elastomers. 收起
VISIOMER® 1,6-HDDMA Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® 1,6-HDDMA is a hydrophobic dimethacrylate. Ideal for use as crosslinker for sealants, adhesives, inks, photopolymer plates and dental compounds.
VISIOMER® AMA Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® AMA is a clear, colorless liquid with a pungent odor. Allyl methacrylate offers exceptional performance with two double bonds of different reactivity, allowing graft copolymerization in emulsions. It is used as a crosslinker, comonomer for rigid...展開 VISIOMER® AMA is a clear, colorless liquid with a pungent odor. Allyl methacrylate offers exceptional performance with two double bonds of different reactivity, allowing graft copolymerization in emulsions. It is used as a crosslinker, comonomer for rigid plastics, graft crosslinker and base product for the manufacture of silanes. 收起
VISIOMER® BDGMA Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® BDGMA is a monofunctional "label-free"methacrylate monomer with ether functionality. It has a very low Tg and is therefore an excellent plasticizing monomer, e.g. in emulsions
VISIOMER® C18 PEG 1105 MA W Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® C18 PEG 1105 MA W is a polar methacrylate monomer in water and GMAA. It consist of a hydrophylic backbone with side chains that end in a hydrophobic group . Ideal for use as associative polymeric thickener in emulsion polymers.
VISIOMER® DMAPMA Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® DMAPMA is an amino functional methacrylate monomer that is used to improve pigment wetting and substrate adhesion to polymers. Suggested applications include paints and coatings, paper and water and cosmetic applications.
VISIOMER® EGDMA Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® EGDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent to improve hardness and mechanical properties in plastics and adhesives, and a coagent for peroxide crosslinking of elastomers.
VISIOMER® EHMA Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® EHMA is hydrophobic methacrylate monomer with low Tg. Used as flexibilizer and internal plasticizer. It is also an excellent co-monomer in coatings and adhesive applications.
VISIOMER® IDMA Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® IDMA is a hydrophobic methacrylate monomer with very low Tg. It is for use as a co-monomer in adhesives, sealants and paint resins.
VISIOMER® MAAmide Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® MAAmide is a colorless, solid, crystalline with very high Tg . It is a special monomer for thermosetting paints and self-crosslinking emulsions.
VISIOMER® MADAME™ Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® MADAME™ is a monofunctional methacrylate with a tertiary amino group in the side chain. Ideal for improving adhesion of formulations. Also used for the preparation of cationic polymers, especially quaternary ammonium polymers and flocculants.
VISIOMER® MEEU 25 M Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® MEEU 25 M is an ureido methacrylate 25% in MMA. Used to impart wet adhesion and wet scrub resistance to solvent based polymers.
VISIOMER® MEEU 50 W Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® MEEU 50 W is an ureido methacrylate 50% in water. It is designed to improve wet adhesion properties of emulsion polymers and wet scrub resistance of the final products.
VISIOMER® MPEG 750 MA W Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® MPEG 750 MA W is a highly polar monomer (50% in water) with excellent water solubility. Used as co-polymerizable emulsifier to stabilize latex polymer systems e.g. emulsion.
VISIOMER® THFMA Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® THFMA is a low viscosity, low odor mono methacrylate monomer that impacts flexibility and adhesion to adhesive applications. Due to its low volatility, it can be used as reactive diluent for reactive systems, e.g. adhesives
VISIOMER® TMPTMA Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® TMPTMA is a trifunctional methacrylate monomer. It is ideal for use as a crosslinking agent in free radical polymerization, as adhesion promoter and hardener for PVC plastisol, and coagent for peroxide crosslinking of elastomers.
VISIOMER® TRGDMA Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® TRGDMA is a low viscosity dimethacrylate monomer that is ideal for use as a crosslinking agent for free radical polymerization, adhesion promoter and hardener for PVC plastisols, and component in reactive resins.
VISIOMER® c-HMA Evonik Performance Materials GmbH, BL Methacrylates VISIOMER® c-HMA is a clear, colorless hydrophobic methacrylate monomer that can be used for polymer synthesis. It is ideal for use in the paint, adhesive, leather, paper and textile industries.
VISIOMER®Terra C13-MA Evonik Performance Materials GmbH, BL Methacrylates VISIOMER®Terra C13-MA is a hydrophobic methacrylate monomer with very low Tg. It is ideal for use as flexibilizer and internal plasticizer.
VISIOMER®Terra C17,4-MA Evonik Performance Materials GmbH, BL Methacrylates VISIOMER®Terra C17,4-MA is a hydrophobic methacrylate monomer with low Tg . It can be used as flexibilizer and internal plasticizer in coatings and reactive resins applications.
VISIOMER®Terra IBOMA Evonik Performance Materials GmbH, BL Methacrylates VISIOMER®Terra IBOMA is bulky side chain alkyl methacrylate monomer with very high Tg. It provide polymers with reduced viscosity , thus allowing a higher solids content. Suggested applications include coatings and adhesive applications.