| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Bitoner® C9 Resin BP-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...展開 Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-120 has recommended applications in sealants, solvent based adhesives, rubber, coatings, printing ink, and hot melt adhesives. 收起 | |
| Bitoner® C9 Resin BP-140 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...展開 Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-140 has recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, asphalt modification, printing ink, and hot melt adhesives. 收起 | |
| Bitoner® C9 Resin BP-150 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent...展開 Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, printing ink, and hot melt adhesives. 收起 | |
| Bitoner® H-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has re...展開 Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has recommended applications in solvent adhesives, plastic modification, hot melt adhesives, and wax modification. 收起 | |
| Bitoner® Resin BA-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water res...展開 Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water resistance, low odor, and very low VOC. BA-120 has recommended applications in sealants, rubber, coatings, printing ink, hot melt adhesive, and solvent based adhesives. 收起 | |
| Bitoner® Resin LH-3100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications...展開 Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications in sealants, coatings, ink, pressure sensitive adhesives, and hot melt adhesives. 收起 | |
| C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Chlorinated Rubber TR1-CR-1 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展開 Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-2 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine...展開 Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-3 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marin...展開 Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-4 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展開 Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Dispersion Agent BLK-9918 | BELIKE Chemical Co.,Ltd. | Dispersion Agent BLK-9918 is a coating additive that is in the form of a yellow or brown liquid. This product is most commonly used as a dispersion agent in water-based paint, inks, and water-based acrylic resins. | |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| LA Glass Flake GF001LA | Glassflake Ltd | LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100LA | Glassflake Ltd | LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100MLA | Glassflake Ltd | LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique subst...展開 LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Milecell 60 HPMC | MPI Chemie B.V. | Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water ...展開 Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 65 HPMC | MPI Chemie B.V. | Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water ...展開 Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 75 HPMC | MPI Chemie B.V. | Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water ...展開 Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell EC Standard | MPI Chemie B.V. | Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and c...展開 Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Moonshine® AgFlake 100-100 (GFEAGF-1100) | Glassflake Ltd | Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings...展開 Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-20 (GFEAGF-1020) | Glassflake Ltd | Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-40 (GFEAGF-1040) | Glassflake Ltd | Moonshine® AgFlake 100-40 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 40 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-40 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 40 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-60 (GFEAGF-1060) | Glassflake Ltd | Moonshine® AgFlake 100-60 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 60 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-60 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 60 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-80 (GFEAGF-1080) | Glassflake Ltd | Moonshine® AgFlake 100-80 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 80 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-80 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 80 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AuFlake 500-90 (GFEAUF-5090) | Glassflake Ltd | Moonshine® AuFlake 500-90 are thin borosilicate glass flakes encapsulated in silver, gold, and tin oxide. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 90 μm. High conductivity can be achie...展開 Moonshine® AuFlake 500-90 are thin borosilicate glass flakes encapsulated in silver, gold, and tin oxide. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 90 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® Blue Shimmer (GFEB) | Glassflake Ltd | Moonshine® Blue Shimmer (GFEB) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high t...展開 Moonshine® Blue Shimmer (GFEB) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Blue Sparkle (GFEBS) | Glassflake Ltd | Moonshine® Blue Sparkle (GFEBS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high ...展開 Moonshine® Blue Sparkle (GFEBS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Bronze Ultra Shimmer (GFEBRSU) | Glassflake Ltd | Moonshine® Bronze Ultra Shimmer (GFEBRSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined ...展開 Moonshine® Bronze Ultra Shimmer (GFEBRSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) | Glassflake Ltd | Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display...展開 Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Blue-Green-Gold Sparkle (GFE-BGGS) | Glassflake Ltd | Moonshine® Colour Travel Blue-Green-Gold Sparkle (GFE-BGGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display st...展開 Moonshine® Colour Travel Blue-Green-Gold Sparkle (GFE-BGGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) | Glassflake Ltd | Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...展開 Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Gold-Red-Violet Shimmer (GFE-GRV) | Glassflake Ltd | Moonshine® Colour Travel Gold-Red-Violet Shimmer (GFE-GRV) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display...展開 Moonshine® Colour Travel Gold-Red-Violet Shimmer (GFE-GRV) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Gold-Red-Violet Sparkle (GFE-GRVS) | Glassflake Ltd | Moonshine® Colour Travel Gold-Red-Violet Sparkle (GFE-GRVS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that displa...展開 Moonshine® Colour Travel Gold-Red-Violet Sparkle (GFE-GRVS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) | Glassflake Ltd | Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...展開 Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Red-Violet-Blue Shimmer (GFE-RVB) | Glassflake Ltd | Moonshine® Colour Travel Red-Violet-Blue Shimmer (GFE-RVB) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display...展開 Moonshine® Colour Travel Red-Violet-Blue Shimmer (GFE-RVB) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Red-Violet-Blue Sparkle (GFE-RVBS) | Glassflake Ltd | Moonshine® Colour Travel Red-Violet-Blue Sparkle (GFE-RVBS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that displa...展開 Moonshine® Colour Travel Red-Violet-Blue Sparkle (GFE-RVBS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) | Glassflake Ltd | Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...展開 Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Violet-Blue-Green Shimmer (GFE-VBG) | Glassflake Ltd | Moonshine® Colour Travel Violet-Blue-Green Shimmer (GFE-VBG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that displ...展開 Moonshine® Colour Travel Violet-Blue-Green Shimmer (GFE-VBG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Violet-Blue-Green Sparkle (GFE-VBGS) | Glassflake Ltd | Moonshine® Colour Travel Violet-Blue-Green Sparkle (GFE-VBGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that disp...展開 Moonshine® Colour Travel Violet-Blue-Green Sparkle (GFE-VBGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) | Glassflake Ltd | Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments th...展開 Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Copper Ultra Shimmer (GFECOSU) | Glassflake Ltd | Moonshine® Copper Ultra Shimmer (GFECOSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined w...展開 Moonshine® Copper Ultra Shimmer (GFECOSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Gold Shimmer (GFEG) | Glassflake Ltd | Moonshine® Gold Shimmer (GFEG) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high tr...展開 Moonshine® Gold Shimmer (GFEG) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Gold Sparkle (GFEGS) | Glassflake Ltd | Moonshine® Gold Sparkle (GFEGS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high t...展開 Moonshine® Gold Sparkle (GFEGS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Green Shimmer (GFEGR) | Glassflake Ltd | Moonshine® Green Shimmer (GFEGR) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high ...展開 Moonshine® Green Shimmer (GFEGR) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Green Sparkle (GFEGRS) | Glassflake Ltd | Moonshine® Green Sparkle (GFEGRS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high...展開 Moonshine® Green Sparkle (GFEGRS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Metallic Gold Ultra Shimmer (GFEMGSU) | Glassflake Ltd | Moonshine® Metallic Gold Ultra Shimmer (GFEMGSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors com...展開 Moonshine® Metallic Gold Ultra Shimmer (GFEMGSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Red Shimmer (GFER) | Glassflake Ltd | Moonshine® Red Shimmer (GFER) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high tra...展開 Moonshine® Red Shimmer (GFER) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Red Sparkle (GFERS) | Glassflake Ltd | Moonshine® Red Sparkle (GFERS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high tr...展開 Moonshine® Red Sparkle (GFERS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Russet Ultra Shimmer (GFERUSU) | Glassflake Ltd | Moonshine® Russet Ultra Shimmer (GFERUSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined w...展開 Moonshine® Russet Ultra Shimmer (GFERUSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Silver White Shimmer (GFESW) | Glassflake Ltd | Moonshine® Silver White Shimmer (GFESW) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined wit...展開 Moonshine® Silver White Shimmer (GFESW) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Silver White Sparkle (GFESWS) | Glassflake Ltd | Moonshine® Silver White Sparkle (GFESWS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined wi...展開 Moonshine® Silver White Sparkle (GFESWS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Silver White Ultra Sparkle (GFESWUS) | Glassflake Ltd | Moonshine® Silver White Ultra Sparkle (GFESWUS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors comb...展開 Moonshine® Silver White Ultra Sparkle (GFESWUS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Ultra Brazen Blue Shimmer (GFUEB) | Glassflake Ltd | Moonshine® Ultra Brazen Blue Shimmer (GFUEB) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combi...展開 Moonshine® Ultra Brazen Blue Shimmer (GFUEB) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined with interference effects. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in industrial applications up to 180°C. 收起 | |
| Moonshine® Ultra Brazen Blue Sparkle (GFUEBS) | Glassflake Ltd | Moonshine® Ultra Brazen Blue Sparkle (GFUEBS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors comb...展開 Moonshine® Ultra Brazen Blue Sparkle (GFUEBS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined with interference effects. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in industrial applications up to 180°C. 收起 | |
| Moonshine® Ultra Golden Yellow Shimmer (GFUEY) | Glassflake Ltd | Moonshine® Ultra Golden Yellow Shimmer (GFUEY) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors com...展開 Moonshine® Ultra Golden Yellow Shimmer (GFUEY) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined with interference effects. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in industrial applications up to 180°C. 收起 | |
| Moonshine® Ultra Golden Yellow Sparkle (GFUEYS) | Glassflake Ltd | Moonshine® Ultra Golden Yellow Sparkle (GFUEYS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors co...展開 Moonshine® Ultra Golden Yellow Sparkle (GFUEYS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined with interference effects. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in industrial applications up to 180°C. 收起 | |
| Moonshine® Ultra Grey Shimmer (GFUEG) | Glassflake Ltd | Moonshine® Ultra Grey Shimmer (GFUEG) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined wit...展開 Moonshine® Ultra Grey Shimmer (GFUEG) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined with interference effects. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in industrial applications up to 180°C. 收起 | |
| Moonshine® Ultra Grey Sparkle (GFUEGS) | Glassflake Ltd | Moonshine® Ultra Grey Sparkle (GFUEGS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined wi...展開 Moonshine® Ultra Grey Sparkle (GFUEGS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined with interference effects. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in industrial applications up to 180°C. 收起 | |
| Moonshine® Ultra Hot Pink Shimmer (GFUEP) | Glassflake Ltd | Moonshine® Ultra Hot Pink Shimmer (GFUEP) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined...展開 Moonshine® Ultra Hot Pink Shimmer (GFUEP) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined with interference effects. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in industrial applications up to 180°C. 收起 | |
| Moonshine® Ultra Hot Pink Sparkle (GFUEPS) | Glassflake Ltd | Moonshine® Ultra Hot Pink Sparkle (GFUEPS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combine...展開 Moonshine® Ultra Hot Pink Sparkle (GFUEPS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined with interference effects. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in industrial applications up to 180°C. 收起 | |
| Moonshine® Violet Shimmer (GFEV) | Glassflake Ltd | Moonshine® Violet Shimmer (GFEV) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high ...展開 Moonshine® Violet Shimmer (GFEV) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Violet Sparkle (GFEVS) | Glassflake Ltd | Moonshine® Violet Sparkle (GFEVS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high...展開 Moonshine® Violet Sparkle (GFEVS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| MPI Bright 100 | MPI Chemie B.V. | MPI Bright 100 is an optical brightener in the form of a yellowish powder. It is used as a whitening agent in paints and inks. MPI Bright 100 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 200 | MPI Chemie B.V. | MPI Bright 200 is an optical brightener in the form of a bright yellow crystal powder. It is used as a whitening agent in paints and inks. MPI Bright 200 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 300 | MPI Chemie B.V. | MPI Bright 300 is an optical brightener in the form of a yellowish-green powder. It is used as a whitening agent in paints and inks. MPI Bright 300 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 420 | MPI Chemie B.V. | MPI Bright 420 is an optical brightener in the form of a yellowish green crystalline powder. It is used as a whitening agent in paints and inks. MPI Bright 420 is designed to brighten colors and mask yellowing in desired applications. |
