| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Bisomer® Amine D700 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 多功能氨基醇助劑 | |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...展開 Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. 收起 | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resi...展開 Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings. 收起 | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展開 Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起 | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展開 Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起 | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | 憎水性單官能團甲基丙烯酸酯單體，具有低玻璃化轉變溫度（Tg），具有出色的柔韌性和增塑性 | |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® LMA 97SP 是一款疏水，低玻璃態轉化溫度(Tg)的單功能丙烯酸甲酯單體。作為聚合型塑化劑使用時，展現出很好的可塑性。使用Bisomer® LMA 97SP的配方可以減少不同批次產品在粘度、顏料潤濕性、抗化學品性、附著力、硬度、剪切強度、粘性等性能上的差異性。 該產品是合成應用於工業塗料、印刷油墨、壓敏膠等領域的高質量丙烯酸樹脂的核心原料。 | |
| Bisomer® PEA 6 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 特殊聚合物單體。是水溶性的，並提供了一種創新的途徑用於生產傳統和水性UV固化氨基甲酸酯丙烯酸酯齊聚物。作為HEA和HPA的替代物，它無毒、易於處理，列於歐洲現有商業化學品目錄（EINECS）的聚合物分類 | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 為制備UV固化氨基甲酸酯丙烯酸酯齊聚物提供了一種非常規的途徑。它是用於基於氨基甲酸酯丙烯酸酯和乙烯基酯（環氧乙烯基酯）UV體系的出色的低收縮反應性稀釋劑 | |
| BIT-10 | Dalian Bio-Chem Co., Ltd. | BIT-10 is a broad-spectrum anti-microbial that comes in an amber liquid. It is used in paints and coatings, adhesives and inks to protect from corrosion. This product has a density of 1.02 to 1.1. | |
| BIT-20 | Dalian Bio-Chem Co., Ltd. | BIT-20 is a broad-spectrum anti-microbial that comes in an amber liquid. It is used in paints and coatings, adhesives and inks to protect from corrosion. This product has a density of 1.1 to 1.2. | |
| BLUESIL ACC PA 39 | Elkem Silicones | BLUESIL ACC PA 39 is an additive that reduces the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the ta...展開 BLUESIL ACC PA 39 is an additive that reduces the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the tack-free time (i.e. the time to achieve the final elastomeric properties, also called setting or curing time) will be shortened by the addition of BLUESIL ACC PA 39. 收起 | |
| BLUESIL ADD 11013 | Elkem Silicones | BLUESIL ADD 11013 is a polyether-modified polydimethylsiloxane for use in solventless paints and varnishes, and in water-based paints and inks. | |
| BLUESIL ADD PC THIXO | Elkem Silicones | BLUESIL ADD PC THIXO is an additive designed to reduce the flowability of certain RTV- the BLUESIL range. | |
| BLUESIL ADDITIVE PA THIXO | Elkem Silicones | BLUESIL ADD PA THIXO (Thixotropic Additive) is a rheology modifier for RTV-2 silicones that imparts a thixotropic behavior to the silicone. Its high efficiency allows to reach the non-flow condition with a limited amount added. | |
| BLUESIL CA-35 BLUE | Elkem Silicones | BLUESIL CA-35 BLUE is used primarily with BLUESIL V-330 and BLUESIL V-340. It provides variable hardness of curing for these products. BLUESIL V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It ...展開 BLUESIL CA-35 BLUE is used primarily with BLUESIL V-330 and BLUESIL V-340. It provides variable hardness of curing for these products. BLUESIL V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CA-35 FC | Elkem Silicones | BLUESIL CA-35 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, ...展開 BLUESIL CA-35 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CA-45 FC | Elkem Silicones | BLUESIL CA-45 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, ...展開 BLUESIL CA-45 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CA-55 FC | Elkem Silicones | BLUESIL CA-55 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, ...展開 BLUESIL CA-55 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CATA 24H | Elkem Silicones | BLUESIL CATA 24H is a catalyst that cures at room temperature and leads to a flexible and elastic material BLUESIL RTV 3322. | |
| BLUESIL CATA 6H | Elkem Silicones | BLUESIL CATA 6H is a catalyst that cures at room temperature and leads to a flexible and elastic material BLUESIL RTV 3322. | |
| BLUESIL CATA HI PRO BLUE | Elkem Silicones | BLUESIL CATA HI-PRO BLUE is an organotin carboxylate with additives. It is the standard catalyst for the BLUESIL V-1060 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO BLUE provides deep section cure capability, extremely fast hardness developm...展開 BLUESIL CATA HI-PRO BLUE is an organotin carboxylate with additives. It is the standard catalyst for the BLUESIL V-1060 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO BLUE provides deep section cure capability, extremely fast hardness development and long library life to rubber. 收起 | |
| BLUESIL CATA HI PRO GREEN | Elkem Silicones | BLUESIL CATA HI-PRO GREEN is an organotin carboxylate with additives. It is the standard catalyst for most of the BLUESIL V-1060 and V-1080 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO GREEN provides deep section cure capability, fast hardne...展開 BLUESIL CATA HI-PRO GREEN is an organotin carboxylate with additives. It is the standard catalyst for most of the BLUESIL V-1060 and V-1080 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO GREEN provides deep section cure capability, fast hardness development and long library life to rubber. 收起 | |
| BLUESIL CATA PC THIXO | Elkem Silicones | BLUESIL CATA PC THIXO is a tin salt based activator for Silicon RTV. After addition of 5% of catalyst PC Thixo, the siliconic system –BASE + CATALYST PC becomes more and more elastic, losing its plastic behaviour, and thixotropic. | |
| BLUESIL EMUL 1601 | Elkem Silicones | BLUESIL EMUL 1601 is a general purpose, non-ionic oil in water silicone emulsion of a medium viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1601 may be used alone or as an additive at low levels in other emulsion systems to achieve specific p...展開 BLUESIL EMUL 1601 is a general purpose, non-ionic oil in water silicone emulsion of a medium viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1601 may be used alone or as an additive at low levels in other emulsion systems to achieve specific performance or processing characteristics. 收起 | |
| BLUESIL EMUL 1610 | Elkem Silicones | BLUESIL EMUL 1610 is a general purpose, non-ionic oil in water silicone emulsion of a high viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1610 may be used alone or as an additive at low levels in other emulsion systems to achieve specific per...展開 BLUESIL EMUL 1610 is a general purpose, non-ionic oil in water silicone emulsion of a high viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1610 may be used alone or as an additive at low levels in other emulsion systems to achieve specific performance or processing characteristics. 收起 | |
| BLUESIL EMUL 872RH | Elkem Silicones | BLUESIL EMUL 872RH is a general purpose, non-ionic, aqueous silicone emulsion. | |
| BLUESIL FLD 1658 | Elkem Silicones | BLUESIL FLD 1658 is a methylalkylpolysiloxane which has outstanding lubricating properties and presents a good compatibility with many products other than silicones. | |
| BLUESIL GP-25 | Elkem Silicones | BLUESIL GP 25 is a general purpose, 25DSA, two component, tin catalyzed, room temperature curing silicone elastomer. It is designed as a medium viscosity, medium strength elastomer with good cured rubber properties, long library life and accurate detail r...展開 BLUESIL GP 25 is a general purpose, 25DSA, two component, tin catalyzed, room temperature curing silicone elastomer. It is designed as a medium viscosity, medium strength elastomer with good cured rubber properties, long library life and accurate detail reproduction. 收起 | |
| BLUESIL HI PRO CLEAR | Elkem Silicones | BLUESIL CATA HI-PRO CLEAR is an organotin carboxylate with additives. It is a clear catalyst for most of theBLUESIL V-1060 andV-1080 series of moldmaking rubber compounds.BLUESIL CATA HI-PRO CLEAR provides deep section cure capability, fast hardness devel...展開 BLUESIL CATA HI-PRO CLEAR is an organotin carboxylate with additives. It is a clear catalyst for most of theBLUESIL V-1060 andV-1080 series of moldmaking rubber compounds.BLUESIL CATA HI-PRO CLEAR provides deep section cure capability, fast hardness development and long library life to rubber. 收起 | |
| BLUESIL PC RTRD | Elkem Silicones | BLUESIL PC RTRD is an additive designed to increase the time required to obtain the final properties of condensation curing RTV-2. | |
| BLUESIL PI 2074 | Elkem Silicones | BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems. | |
| BLUESIL PT ACC | Elkem Silicones | BLUESIL PT ACC is an accelerator for platinum cure, polyaddition silicone moldmaking compounds. It can be used with many of Bluestar Silicones addition cure products to customize the de-mold time to as short as 2 hours, allowing multiple molds to be made ...展開 BLUESIL PT ACC is an accelerator for platinum cure, polyaddition silicone moldmaking compounds. It can be used with many of Bluestar Silicones addition cure products to customize the de-mold time to as short as 2 hours, allowing multiple molds to be made each day per master. This can be done without adversely affecting the physical properties of the elastomer. 收起 | |
| BLUESIL RT FOAM 3240 A | Elkem Silicones | BLUESIL RT FOAM 3240 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in 1:1 ratio, the product will expand and cure to a foamed elastomer at room te...展開 BLUESIL RT FOAM 3240 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in 1:1 ratio, the product will expand and cure to a foamed elastomer at room temperature. 收起 | |
| BLUESIL RT FOAM 3241 A | Elkem Silicones | BLUESIL RT FOAM 3241 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in a 1:1 ratio, the product expands and cures to a foamed elastomer at room tem...展開 BLUESIL RT FOAM 3241 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in a 1:1 ratio, the product expands and cures to a foamed elastomer at room temperature. 收起 | |
| BLUESIL RTRD PA 40 | Elkem Silicones | BLUESIL RTRD PA 40 is an additive that increases the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the...展開 BLUESIL RTRD PA 40 is an additive that increases the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the tack-free time (i.e. the time to achieve the final elastomeric properties, also called setting or curing time) will be prolonged by the addition of BLUESIL RTRD PA 40. 收起 | |
| BLUESIL RTV 1556 A | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展開 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 1556 FC B | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展開 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 1597 A | Elkem Silicones | BLUESIL RTV 1597 is a two component, medium hardness, high strength, addition cure, room temperature or heat curing silicone elastomer. Designed specifically for moldmaking applications, it offers low viscosity, high tear and cut resistance, and easy rele...展開 BLUESIL RTV 1597 is a two component, medium hardness, high strength, addition cure, room temperature or heat curing silicone elastomer. Designed specifically for moldmaking applications, it offers low viscosity, high tear and cut resistance, and easy release for long lasting molds. BLUESIL RTV 1597 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and well-defined detail reproduction, making it ideal for prototyping applications. 收起 | |
| BLUESIL RTV 3040 A | Elkem Silicones | BLUESIL RTV 3040 A is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone compone...展開 BLUESIL RTV 3040 A is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 B | Elkem Silicones | BLUESIL RTV 3040 B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone compone...展開 BLUESIL RTV 3040 B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 HARD A 1/1 | Elkem Silicones | BLUESIL RTV 3040 HARD A 1/1 is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicon...展開 BLUESIL RTV 3040 HARD A 1/1 is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 HARD B | Elkem Silicones | BLUESIL RTV 3040 HARD B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone co...展開 BLUESIL RTV 3040 HARD B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 LV B | Elkem Silicones | BLUESIL RTV 3040 LV B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone comp...展開 BLUESIL RTV 3040 LV B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 QC A | Elkem Silicones | BLUESIL RTV 3040 QC A is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone comp...展開 BLUESIL RTV 3040 QC A is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 QC B | Elkem Silicones | BLUESIL RTV 3040 QC B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone comp...展開 BLUESIL RTV 3040 QC B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3040 SB B | Elkem Silicones | BLUESIL RTV 3040 SB B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone comp...展開 BLUESIL RTV 3040 SB B is a two component silicone elastomer which is available in 5 versions with different features. It crosslinks at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat (max. 150°C). The silicone components are delivered as two viscous liquids, which once mixed and cured, transform into a transparent, elastic and resistant material. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3120 A | Elkem Silicones | BLUESIL RTV 3120 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. | |
| BLUESIL RTV 3122 | Elkem Silicones | BLUESIL RTV 3122 + 2% Catalyst 68 is a silicone elastomer with two components, crosslinking at room temperature by a polycondensation reaction. | |
| BLUESIL RTV 3130 A | Elkem Silicones | BLUESIL RTV 3130 A&B, RTV 3131 A&B, RTV 3131 A&B SC and RTV 3132 A&B are two component silicone elastomers which cure at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. | |
| BLUESIL RTV 3220 LV | Elkem Silicones | BLUESIL RTV 3220 LV is a silicone elastomer which cures at room temperature by a polycondensation reaction. After the addition of catalyst BLUESIL CATA 2H, it cures at room temperature and leads to flexible and elastic material. | |
| BLUESIL RTV 3221 | Elkem Silicones | BLUESIL RTV 3221 is a silicone elastomer which, after the addition of catalyst, cures at room temperature and leads to flexible and elastic material. | |
| BLUESIL RTV 3223 | Elkem Silicones | BLUESIL RTV 3223 is a two-component silicone elastomer which, after the addition of CATA 2H, cures at room temperature and leads to flexible and elastic material. | |
| BLUESIL RTV 3240 | Elkem Silicones | BLUESIL RTV 3240 is a silicone elastomer which, after the addition of BLUESIL CATA N, cures at room temperature and leads to flexible and elastic material. The crosslinking reaction occurs, without release of heat, the formation of isopropanol, whose disp...展開 BLUESIL RTV 3240 is a silicone elastomer which, after the addition of BLUESIL CATA N, cures at room temperature and leads to flexible and elastic material. The crosslinking reaction occurs, without release of heat, the formation of isopropanol, whose dispersion is required before used of the mould or the protected object 收起 | |
| BLUESIL RTV 3245 | Elkem Silicones | BLUESIL RTV 3245 is is a silicone elastomer which, after the addition of BLUESIL CATA C cures at room temperature and leads to a flexible and elastic material. | |
| BLUESIL RTV 3310 | Elkem Silicones | BLUESIL RTV 3310 is a silicone elastomer which, after the addition of catalysts BLUESIL CATA 6H or BLUESIL CATA 24H, cures at room temperature by a polycondensation reaction and leads to a flexible and elastic material. | |
| BLUESIL RTV 3318 | Elkem Silicones | BLUESIL RTV 3318 is a silicone elastomer which, after the addition of a catalyst, cures at room temperature and leads to a flexible and elastic material. | |
| BLUESIL RTV 3318 SPU | Elkem Silicones | BLUESIL RTV 3318 SPU, is a silicone elastomer which, after the addition of catalyst BLUESIL CATA SPU, cures at room temperature by a polycondensation reaction, leading to a flexible and elastic material. | |
| BLUESIL RTV 3322 | Elkem Silicones | BLUESIL RTV 3322 is a silicone elastomer which, after the addition of catalysts BLUESIL 24H or BLUESIL 6H, cures at room temperature and leads to a flexible and elastic material. | |
| BLUESIL RTV 3325 | Elkem Silicones | BLUESIL RTV 3325 is a silicone elastomer which, after the addition of a catalyst, cures at room temperature and leads to a flexible and elastic material. | |
| BLUESIL RTV 3325 P | Elkem Silicones | BLUESIL RTV 3325 P is a two-component silicone elastomer which upon reaction at room temperature through the addition of BLUESIL CATA 83 acquires good mechanical and resilient properties. | |
| BLUESIL RTV 3330 SPU | Elkem Silicones | BLUESIL RTV 3330 SPU, is a silicone elastomer which, after the addition of catalyst BLUESIL CATA SPU, cures at room temperature by a polycondensation reaction, leading to a flexible and elastic material. | |
| BLUESIL RTV 3335 SPU | Elkem Silicones | BLUESIL RTV 3335 SPU, is a silicone elastomer which, after the addition of catalyst BLUESIL CATA SPU, cures at room temperature by a polycondensation reaction, leading to a flexible and elastic material. | |
| BLUESIL RTV 3410 A QC | Elkem Silicones | BLUESIL RTV 3410 QC A is a two component, silicone elastomers which cures at room temperature by a polyaddition reaction and leads to a resistant and elastic material. | |
| BLUESIL RTV 3428 A | Elkem Silicones | BLUESIL RTV 3428 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. | |
| BLUESIL RTV 3430 SB A | Elkem Silicones | BLUESIL RTV 3430 SB A – is a two component, silicone elastomers which cures at room temperature by a polyaddition reaction. | |
| BLUESIL RTV 3433 A | Elkem Silicones | BLUESIL RTV 3433 A is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (10:1 ratio). | |
| BLUESIL RTV 3436 A | Elkem Silicones | BLUESIL RTV 3436 A – is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (10:1 ratio). The product is available in two color versions: BLUESIL RTV 3436 A&B: Red BLUESIL RTV 3436 TL A&B: Colorless | |
| BLUESIL RTV 3436 A TRANSLUCENT | Elkem Silicones | BLUESIL RTV 3436 A – is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (10:1 ratio). The product is available in two color versions: BLUESIL RTV 3436 A&B: Red BLUESIL RTV 3436 TL A&B: Colorless | |
| BLUESIL RTV 3440 A | Elkem Silicones | BLUESIL RTV 3440 A is a two component silicone elastomers that crosslink at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat. The silicone materials are delivered as two viscous liquid components, which once mixed a...展開 BLUESIL RTV 3440 A is a two component silicone elastomers that crosslink at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat. The silicone materials are delivered as two viscous liquid components, which once mixed and cured, transform into an elastic and resistant elastomer. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3445 A | Elkem Silicones | BLUESIL RTV 3445 A is a two component silicone elastomers that crosslink at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat. The silicone materials are delivered as two viscous liquid components, which once mixed a...展開 BLUESIL RTV 3445 A is a two component silicone elastomers that crosslink at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat. The silicone materials are delivered as two viscous liquid components, which once mixed and cured, transform into an elastic and resistant elastomer. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3450 A | Elkem Silicones | BLUESIL RTV 3450 A is a two component silicone elastomers that crosslink at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat. The silicone materials are delivered as two viscous liquid components, which once mixed a...展開 BLUESIL RTV 3450 A is a two component silicone elastomers that crosslink at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat. The silicone materials are delivered as two viscous liquid components, which once mixed and cured, transform into an elastic and resistant elastomer. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3460 A | Elkem Silicones | BLUESIL RTV 3460 A is a two component silicone elastomers that crosslink at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat. The silicone materials are delivered as two viscous liquid components, which once mixed a...展開 BLUESIL RTV 3460 A is a two component silicone elastomers that crosslink at room temperature by polyaddition reaction. The polymerisation can be accelerated by heat. The silicone materials are delivered as two viscous liquid components, which once mixed and cured, transform into an elastic and resistant elastomer. Polymerisation occurs without production of heat. 收起 | |
| BLUESIL RTV 3503 A | Elkem Silicones | BLUESIL RTV 3503 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. | |
| BLUESIL RTV 3512 A | Elkem Silicones | BLUESIL RTV 3512 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The product is available in following versions: - BLUESIL RTV 3512 A&B (colors ORANGE or YELLOW) - BLUESIL RTV 3512 NB A&B (No...展開 BLUESIL RTV 3512 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The product is available in following versions: - BLUESIL RTV 3512 A&B (colors ORANGE or YELLOW) - BLUESIL RTV 3512 NB A&B (No Bleeding) - BLUESIL RTV 3512 NB QC A&B (No Bleeding, Quick Curing) 收起 | |
| BLUESIL RTV 3512 NB A | Elkem Silicones | BLUESIL RTV 3512 NB A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The product is available in following versions: BLUESIL RTV 3512 A&B (colors ORANGE or YELLOW) BLUESIL RTV 3512 NB A&B (...展開 BLUESIL RTV 3512 NB A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The product is available in following versions: BLUESIL RTV 3512 A&B (colors ORANGE or YELLOW) BLUESIL RTV 3512 NB A&B (No Bleeding) BLUESIL RTV 3512 NB QC A&B (No Bleeding, Quick Curing) 收起 | |
| BLUESIL RTV 3520 A | Elkem Silicones | BLUESIL RTV 3520 A is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). | |
| BLUESIL RTV 3522 A | Elkem Silicones | BLUESIL RTV 3522 A is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). | |
| BLUESIL RTV 3527 A | Elkem Silicones | BLUESIL RTV 3527 A is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). Aiming at satisfying different application requirements BLUESIL RTV 3527 A&B is available in 3 color versions and a Quick Cur...展開 BLUESIL RTV 3527 A is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). Aiming at satisfying different application requirements BLUESIL RTV 3527 A&B is available in 3 color versions and a Quick Curing (QC) version. 收起 | |
| BLUESIL RTV 3527 A QC | Elkem Silicones | BLUESIL RTV 3527 A QC is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). Aiming at satisfying different application requirements BLUESIL RTV 3527 A&B is available in 3 color versions and a Quick ...展開 BLUESIL RTV 3527 A QC is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). Aiming at satisfying different application requirements BLUESIL RTV 3527 A&B is available in 3 color versions and a Quick Curing (QC) version. 收起 | |
| BLUESIL RTV 3530 A | Elkem Silicones | BLUESIL RTV 3530 A is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). | |
| BLUESIL RTV 3535 A | Elkem Silicones | BLUESIL RTV 3535 A – is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The BLUESIL RTV 3535 A&B is available in two colours: WHITE and TRANSLUCENT. | |
| BLUESIL RTV 3535 P A | Elkem Silicones | BLUESIL RTV 3535 P A is a two-component silicone elastomer which cures at room temperature by a polyaddition reaction and leads to a flexible and elastic material. | |
| BLUESIL RTV 3542 A QC TRANSLUCENT | Elkem Silicones | BLUESIL RTV 3542 A QC is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). Aiming at satisfying different application requirements, BLUESIL RTV 3542 A&B is available in 3 versions:BLUESIL RTV 3542...展開 BLUESIL RTV 3542 A QC is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). Aiming at satisfying different application requirements, BLUESIL RTV 3542 A&B is available in 3 versions:BLUESIL RTV 3542 A&B BLUESIL RTV 3542 A&B HV (High Viscosity)BLUESIL RTV 3542 A&B QC (Quick Curing) 收起 | |
| BLUESIL RTV 3625 | Elkem Silicones | BLUESIL RTV 3625 is a low viscosity, 25 Durometer (Shore A), two component, tin catalyzed, room temperature curing silicone elastomer. It is designed as a high strength elastomer with good cured rubber properties, long library life and accurate detail rep...展開 BLUESIL RTV 3625 is a low viscosity, 25 Durometer (Shore A), two component, tin catalyzed, room temperature curing silicone elastomer. It is designed as a high strength elastomer with good cured rubber properties, long library life and accurate detail reproduction.BLUESIL RTV 3625 can be catalyzed with BLUESIL HI-PRO GREEN, fast settingBLUESIL HI-PRO BLUE, or BLUESIL CATA 58R. 收起 | |
| BLUESIL RTV 3720 A | Elkem Silicones | BLUESIL RTV 3720 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The material can be applied onto horizontal as well as vertical surfaces thanks to its slight thixotropic behaviour, by means ...展開 BLUESIL RTV 3720 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The material can be applied onto horizontal as well as vertical surfaces thanks to its slight thixotropic behaviour, by means of casting or solventless spraying in both cases a silicone film is obtained. The product is available in two versions:RTV 3720 A&B: fast cure, for spray applicationRTV 3720 SC A&B: slow cure, for casting application 收起 | |
| BLUESIL RTV 3720 SC A | Elkem Silicones | BLUESIL RTV 3720 SC A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The material can be applied onto horizontal as well as vertical surfaces thanks to its slight thixotropic behaviour, by mea...展開 BLUESIL RTV 3720 SC A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The material can be applied onto horizontal as well as vertical surfaces thanks to its slight thixotropic behaviour, by means of casting or solventless spraying in both cases a silicone film is obtained. The product is available in two versions:RTV 3720 A&B: fast cure, for spray applicationRTV 3720 SC A&B: slow cure, for casting application 收起 | |
| BLUESIL RTV 3825 | Elkem Silicones | BLUESIL RTV 3825 is a two component silicone elastomer, crosslinking at room temperature by reaction of polycondensation. It yields a soft flexible, elastic material presenting excellent tear resistance. | |
| BLUESIL SDS CAT CLEAR | Elkem Silicones | BLUESIL SDS CATA CLEAR is a thixotropic catalyst for condensation cure moldmaking products such as BLUESIL V 1065A and BLUESIL V 1067A. | |
| BLUESIL SDS CAT PURPLE | Elkem Silicones | BLUESIL SDS CATA PURPLE is a thixotropic catalyst for condensation cure moldmaking products such as BLUESIL V 1065A and BLUESIL V 1067A. | |
| BLUESIL SP 3304 | Elkem Silicones | BLUESIL SP 3304 is a non-hydrolysable polyether modified polydimethylsiloxane. | |
| BLUESIL SP 3304 | Elkem Silicones | BLUESIL SP 3304 is a non-hydrolysable polyether modified polydimethylsiloxane. | |
| BLUESIL TCS 7513 A | Elkem Silicones | BLUESIL TCS 7513 A is a two-component heat curing liquid silicone elastomer which cures by a polyaddition reaction. All products from the Textile Coating System product line are specially engineered for textile coating applications. | |
| BLUESIL TCS 7515 A | Elkem Silicones | BLUESIL TCS 7515 A is a two-component heat curing liquid silicone elastomer that cross-links by a polyaddition reaction. All products from the Textile Coating System product line are specially engineered for textile coating applications. | |
| BLUESIL TCS 7516 B | Elkem Silicones | BLUESIL TCS 7516 is a two-component heat curing liquid silicone elastomer, which cures by a polyaddition reaction.All Products from the Textile Coating System product line are specially engineered for coating applications. |
