| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Akuabrid HS 019 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HS 019 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics. | |
| Akuabrid HS 070 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HS 070 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics. | |
| Akuarane CRP 3300 | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP 3300 is a liquid, waterborne polyurethane dispersion that displays good corrosion, alkali, and hydrolysis resistance. This product is ideal for use in plastic, metal, and textile coating applications. | |
| Akuarane CRP 3500A | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP 3500A is a liquid, waterborne polyurethane dispersion that displays good corrosion, alkali, and hydrolysis resistance. This product is ideal for use in plastic, metal, and textile coating applications. | |
| Akuarane CRP 7005B | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP 7005B is a liquid, waterborne polyurethane dispersion that displays good corrosion, alkali, and hydrolysis resistance. This product is ideal for use in plastic, metal, and textile coating applications. | |
| Akuarane CRP SR 1310 | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP SR 1310 is a liquid, waterborne polyurethane dispersion that displays good corrosion and alkali resistance. This product is ideal for use in fluorine-based PUD (plastic, metal, and textile) coating applications. | |
| Akuarane CRP SR 1330 | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP SR 1330 is a liquid, waterborne polyurethane dispersion that displays good corrosion and alkali resistance. This product is ideal for use in fluorine-based PUD (plastic, metal, and textile) coating applications. | |
| Akuarane DTP 1322 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1322 is a milky white, liquid, waterborne polyurethane dispersion that displays good adhesion and rubbery feel. This product is ideal for use in textile coatings and adhesives. | |
| Akuarane DTP 1330 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives...展開 Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives. 收起 | |
| Alinco™ M-25 Linseed Oil | ADM | Alinco™ M-25 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finish...展開 Alinco™ M-25 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Q Linseed Oil | ADM | Alinco™ Q Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...展開 Alinco™ Q Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ X Linseed Oil | ADM | Alinco™ X Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...展開 Alinco™ X Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Y Linseed Oil | ADM | Alinco™ Y Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...展開 Alinco™ Y Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z Linseed Oil | ADM | Alinco™ Z Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...展開 Alinco™ Z Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-1 Linseed Oil | ADM | Alinco™ Z-1 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展開 Alinco™ Z-1 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-2 Linseed Oil | ADM | Alinco™ Z-2 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展開 Alinco™ Z-2 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-3 Linseed Oil | ADM | Alinco™ Z-3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展開 Alinco™ Z-3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-4 Linseed Oil | ADM | Alinco™ Z-4 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展開 Alinco™ Z-4 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-5 Linseed Oil | ADM | Alinco™ Z-5 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展開 Alinco™ Z-5 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-6 Linseed Oil | ADM | Alinco™ Z-6 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展開 Alinco™ Z-6 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z/2-Z/3 Linseed Oil | ADM | Alinco™ Z/2-Z/3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall fin...展開 Alinco™ Z/2-Z/3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Benzidine Orange R | Emperor Pigment Co., Ltd. | Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, a...展開 Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, and an EU number of 229-388-1. 收起 | |
| Benzidine Yellow 121H | Emperor Pigment Co., Ltd. | Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展開 Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in PA inks, NC inks, PP inks, and Toluene based inks. 收起 | |
| Benzidine Yellow DHG | Emperor Pigment Co., Ltd. | Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, an...展開 Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. 收起 | |
| Benzidine Yellow G | Emperor Pigment Co., Ltd. | Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0,...展開 Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-A | Emperor Pigment Co., Ltd. | Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展開 Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-B | Emperor Pigment Co., Ltd. | Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. T...展開 Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5 and a pH value of 6.0 to 7.0. 收起 | |
| Benzimidazolone Orange | Emperor Pigment Co., Ltd. | Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100...展開 Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100 grams, and is used in paints and printing inks. 收起 | |
| Benzimidazolone Orange HL | Emperor Pigment Co., Ltd. | Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a den...展開 Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a density value of 1.4 and a pH value of 6.5. 收起 | |
| Bleached Linseed Oil | ADM | Bleached Linseed Oil, in the form of amber clear liquid, is an all-purpose refined, free from mineral acids, grinding oil. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more. | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Ekosol ES 1000 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synth...展開 Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synthetic leather coatings. 收起 | |
| Ekosol ES 1500T | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 1500T is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and high transparency. This product is ideal for use in direct screen printing ink applications. | |
| Ekosol ES 2500 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applicat...展開 Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applications. 收起 | |
| Ekosol ES 2600 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications...展開 Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications. 收起 | |
| Ekosol ES 3450A | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printi...展開 Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printing, and hot foil stamping applications. 收起 | |
| Ekosol ES 5300W | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal f...展開 Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal for use in hot-peel transfer printing and digitally printed white backing applications. 收起 | |
| Fast Blue B | Emperor Pigment Co., Ltd. | Fast Blue B is a pigment that is reddish in color. It has a color index number of Pigment Blue 15, a CAS number of 147-14-8, and an EU number of 205-685-1. This product has a density value of 1.5, a pH value of 7, and is used in offset inks, aqueous inks,...展開 Fast Blue B is a pigment that is reddish in color. It has a color index number of Pigment Blue 15, a CAS number of 147-14-8, and an EU number of 205-685-1. This product has a density value of 1.5, a pH value of 7, and is used in offset inks, aqueous inks, and paints. 收起 | |
| Fast Blue BGNCF | Emperor Pigment Co., Ltd. | Fast Blue BGNCF is a greenish colored pigment that is used in inks. It has a density value of 1.5 and a pH value of 7. This product has a color index number of Pigment Blue 15:4, a CAS number of 147-14-8, and an EU number of 205-685-1. | |
| Fast Blue BGS | Emperor Pigment Co., Ltd. | Fast Blue BGS is a pigment that is greenish in color. It has a color index number of Pigment Blue 15:3, a CAS number of 122390-87-1, and an EU number of 205-685-1. This product has a density value of 1.5, a pH value of 7, and is used in offset inks. | |
| Fast Blue BS | Emperor Pigment Co., Ltd. | Fast Blue BS is a reddish colored pigment that is used in paints and inks. It has a color index number of Pigment Blue 15:1, a CAS number of 12239-87-1, and an EU number of 205-685-1. This product has a density value of 1.5 and a pH value of 7. | |
| Fast Blue Lake | Emperor Pigment Co., Ltd. | Fast Blue Lake is a blue colored pigment that is used in offset inks, waterbased inks, solvent based inks, and Toluene based inks. It has a heat value of 100 degrees Celsius and an oil absorption value of 30 maximum. This product has a color index number ...展開 Fast Blue Lake is a blue colored pigment that is used in offset inks, waterbased inks, solvent based inks, and Toluene based inks. It has a heat value of 100 degrees Celsius and an oil absorption value of 30 maximum. This product has a color index number of Pigment Blue 17, and a CAS number of 71799-04-7. 收起 | |
| Fast Blue Lake BO | Emperor Pigment Co., Ltd. | Fast Blue Lake BO is a blue colored pigment that is used in offset inks. It has a color index number of Pigment Blue 1, and a CAS number of 1325-87-7. This product has a heat value of 140 degrees Celsius and an oil absorption value of less than 45. | |
| Fast Blue Toner | Emperor Pigment Co., Ltd. | Fast Blue Toner is a reddish colored pigment that is used in offset inks, aqueous inks, and solvent inks. It has a density value of 1.6 and a pH value of 7. This product has a color index number of Pigment Blue 1, a CAS number of 1325-410-7, and an EU num...展開 Fast Blue Toner is a reddish colored pigment that is used in offset inks, aqueous inks, and solvent inks. It has a density value of 1.6 and a pH value of 7. This product has a color index number of Pigment Blue 1, a CAS number of 1325-410-7, and an EU number of 215-410-7. 收起 | |
| Fast Blue Toner R | Emperor Pigment Co., Ltd. | Fast Blue Toner R is a pigment that is blue in color. It has a color index number of Pigment Blue 10 and a CAS number of 71798-70-4. This product has a density value of 1.8, a pH value of 6, and is used in offset inks, solvent inks, and aqueous inks. | |
| Fast Milori Blue | Emperor Pigment Co., Ltd. | Fast Milori Blue is a pigment that is blue in color. It has a color index number of Pigment Blue 27, and a CAS number of 14038-43-8. This product has a density value of 1.7 to 1.8, a pH value of 6.0 to 8.0, and is used in offset inks, solvent based paints...展開 Fast Milori Blue is a pigment that is blue in color. It has a color index number of Pigment Blue 27, and a CAS number of 14038-43-8. This product has a density value of 1.7 to 1.8, a pH value of 6.0 to 8.0, and is used in offset inks, solvent based paints, and waterbased paints. 收起 | |
| Fast Orange G | Emperor Pigment Co., Ltd. | Fast Orange G is a pigment that is yellowish transparent in color. It has a color index number of Pigment Orange 13, a CAS number of 3520-72-7, and an EU number of 222-530-3. This product has a density value of 1.5, a pH value of 7, and is used in solvent...展開 Fast Orange G is a pigment that is yellowish transparent in color. It has a color index number of Pigment Orange 13, a CAS number of 3520-72-7, and an EU number of 222-530-3. This product has a density value of 1.5, a pH value of 7, and is used in solvent inks. 收起 | |
| Fast Orange G-R | Emperor Pigment Co., Ltd. | Fast Orange G-R is an orange colored pigment that is used in surface printing inks. It has a color index number of Pigment Orange 13, and a heat resistance value of 160 degrees Celsius. | |
| Fast Orange GRN (Semi-Tr) | Emperor Pigment Co., Ltd. | Fast Orange GRN (Semi-Tr) is a pigment that is orange in color. It has a color index number of Pigment Orange 16, a heat resistance value of 180 degrees Celsius, and is used in offset inks and waterbased inks. | |
| Fast Orange GRN-P(Tr)16 | Emperor Pigment Co., Ltd. | Fast Orange GRN-P(Tr)16 is an orange colored pigment that is used in surface printing inks and inner printing inks. It has a heat resistance value of 180 degrees Celsius and a color index number of Pigment Orange 16. | |
| Fast Orange OP-213(OP) | Emperor Pigment Co., Ltd. | Fast Orange OP-213(OP) is a pigment that is orange in color. It has a color index number of Pigment Orange 34, and a CAS number of 15793-73-4. This product has a density value of 1.40 to 1.45, a pH value of 6.0 to 8.0, and is used in waterbased inks and o...展開 Fast Orange OP-213(OP) is a pigment that is orange in color. It has a color index number of Pigment Orange 34, and a CAS number of 15793-73-4. This product has a density value of 1.40 to 1.45, a pH value of 6.0 to 8.0, and is used in waterbased inks and oil based ink. 收起 | |
| Fast Orange RL-TR | Emperor Pigment Co., Ltd. | Fast Orange RL-TR is a pigment that is reddish in color. It has a color index number of Pigment Orange 34, a CAS number of 15793-72-4, and an EU number of 239-898-6. This product has a density value of 1.4, a pH value of 6.5, and is used in aqueous inks a...展開 Fast Orange RL-TR is a pigment that is reddish in color. It has a color index number of Pigment Orange 34, a CAS number of 15793-72-4, and an EU number of 239-898-6. This product has a density value of 1.4, a pH value of 6.5, and is used in aqueous inks and aqueous coatings. 收起 | |
| Fast Orange RL-T(Tr) | Emperor Pigment Co., Ltd. | Fast Orange RL-T(Tr) is a pigment that is reddish in color. It has a color index number of Pigment Orange 34, a CAS number of 15793-72-4, and an EU number of 239-898-6. This product has a density value of 1.4, a pH value of 6,5, and is used in solvent ink...展開 Fast Orange RL-T(Tr) is a pigment that is reddish in color. It has a color index number of Pigment Orange 34, a CAS number of 15793-72-4, and an EU number of 239-898-6. This product has a density value of 1.4, a pH value of 6,5, and is used in solvent inks, aqueous inks, and aqueous coatings. 收起 | |
| Fast Orange RL(Semi-Tr) | Emperor Pigment Co., Ltd. | Fast Orange RL(Semi-Tr) is an orange colored pigment that is used in waterbased inks. It has a color index number of Pigment Orange 34, a density value of 1.6, and a pH value of 6.0 to 7.0. | |
| Fast Orange RN | Emperor Pigment Co., Ltd. | Fast Orange RN is an orange colored pigment that is used in aqueous inks and air drying paints. It has a color index number of Pigment Orange 5, a CAS number of 3468-63-1, and an EU number of 222-429-4. This product has a density value of 1.4 and a pH val...展開 Fast Orange RN is an orange colored pigment that is used in aqueous inks and air drying paints. It has a color index number of Pigment Orange 5, a CAS number of 3468-63-1, and an EU number of 222-429-4. This product has a density value of 1.4 and a pH value of 5.5. 收起 | |
| Fast Red BBC-S | Emperor Pigment Co., Ltd. | Fast Red BBC-S is a pigment that is bluish red in color. It has a color index number of Pigment Red 48:2, a CAS number of 7023-61-2, and an EU number of 230-303-5. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in NC inks, ...展開 Fast Red BBC-S is a pigment that is bluish red in color. It has a color index number of Pigment Red 48:2, a CAS number of 7023-61-2, and an EU number of 230-303-5. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in NC inks, PA inks, and PP inks. 收起 | |
| Fast Red BBN | Emperor Pigment Co., Ltd. | Fast Red BBN is a yellowish red colored pigment that is used in offset inks. It has a density value of 1.8 and a pH value of 7.0 to 8.0. This product has a color index number of Pigment Red 48:1, a CAS number of 7585-41-3, and an EU number of 231-494-8. | |
| Fast Red BBN-W | Emperor Pigment Co., Ltd. | Fast Red BBN-W is a pigment that is yellowish red in color. It has a color index number of Pigment Red 48:1, a CAS number of 7858-41-3, and an EU number of 231-494-8. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in waterb...展開 Fast Red BBN-W is a pigment that is yellowish red in color. It has a color index number of Pigment Red 48:1, a CAS number of 7858-41-3, and an EU number of 231-494-8. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in waterbased inks and in offset inks. 收起 | |
| Fast Red BBS-W | Emperor Pigment Co., Ltd. | Fast Red BBS-W is a pigment that is red in color. It has a color index number of Pigment Red 48:3, a CAS number of 15782-05-5, and an EU number of 239-879-2. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in waterbased inks...展開 Fast Red BBS-W is a pigment that is red in color. It has a color index number of Pigment Red 48:3, a CAS number of 15782-05-5, and an EU number of 239-879-2. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in waterbased inks. 收起 | |
| Fast Red F2R | Emperor Pigment Co., Ltd. | Fast Red F2R is a yellowish red colored pigment that is used in waterbased inks and in textile printing. It has a color index number of Pigment Red 2, a CAS number of 6041-94-7, and an EU number of 227-930-1. This product has a density value of 1.5 and a ...展開 Fast Red F2R is a yellowish red colored pigment that is used in waterbased inks and in textile printing. It has a color index number of Pigment Red 2, a CAS number of 6041-94-7, and an EU number of 227-930-1. This product has a density value of 1.5 and a pH value of 6.5 to 7.5. 收起 | |
| Fast Red F4R | Emperor Pigment Co., Ltd. | Fast Red F4R is a bluish red colored pigment that is used in textile printing and waterbased inks. It has a density value of 1.5 and a pH value of 6.5 to 7.5. This product has a color index number of Pigment Red 8, a CAS number of 6410-60-6, and an EU num...展開 Fast Red F4R is a bluish red colored pigment that is used in textile printing and waterbased inks. It has a density value of 1.5 and a pH value of 6.5 to 7.5. This product has a color index number of Pigment Red 8, a CAS number of 6410-60-6, and an EU number of 229-100-4. 收起 | |
| Fast Red N | Emperor Pigment Co., Ltd. | Fast Red N is a pigment that is yellowish red in color. It has a color index number of Pigment Red 22, a CAS number of 6448-95-9, and an EU number of 229-245-3. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in waterbased i...展開 Fast Red N is a pigment that is yellowish red in color. It has a color index number of Pigment Red 22, a CAS number of 6448-95-9, and an EU number of 229-245-3. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in waterbased inks. 收起 | |
| Fast Red Toner 6BMW | Emperor Pigment Co., Ltd. | Fast Red Toner 6BMW is a pigment that is violet in color. It has a color index number of Pigment Violet 2, a CAS number of 1326-04-1, and an EU number of 215-414-9. This product has a density value of 1.8, a pH value of 6, and is used in aqueous inks and ...展開 Fast Red Toner 6BMW is a pigment that is violet in color. It has a color index number of Pigment Violet 2, a CAS number of 1326-04-1, and an EU number of 215-414-9. This product has a density value of 1.8, a pH value of 6, and is used in aqueous inks and coating. 收起 | |
| Fast Rose Lake | Emperor Pigment Co., Ltd. | Fast Rose Lake is a violet colored pigment that is used in aqueous inks. It has a density value of 1.7 and a pH value of 7. This product has a color index number of Pigment Violet 1, a CAS number of 1326-03-0, and an EU number of 215-413-3. | |
| Fast Rose Toner | Emperor Pigment Co., Ltd. | Fast Rose Toner is a violet colored pigment that is used in offset inks and aqueous inks. It has a density value of 1.7 and a pH value of 7. This product has a color index number of Pigment Violet 1, a CAS number of 1326-03-0, and an EU number of 215-413-...展開 Fast Rose Toner is a violet colored pigment that is used in offset inks and aqueous inks. It has a density value of 1.7 and a pH value of 7. This product has a color index number of Pigment Violet 1, a CAS number of 1326-03-0, and an EU number of 215-413-3. 收起 | |
| Fast Rose Toner 6BMW | Emperor Pigment Co., Ltd. | Fast Rose Toner 6BMW is a pigment that is violet in color. It has a color index number of Pigment Violet 2, a CAS number of 1326-04-1, and an EU number of 215-414-9. This product has a density value of 1.8, a pH value of 6, and is used in aqueous inks and...展開 Fast Rose Toner 6BMW is a pigment that is violet in color. It has a color index number of Pigment Violet 2, a CAS number of 1326-04-1, and an EU number of 215-414-9. This product has a density value of 1.8, a pH value of 6, and is used in aqueous inks and aqueous coatings. 收起 | |
| Fast Violet 4R | Emperor Pigment Co., Ltd. | Fast Violet 4R is a pigment that is violet in color. It has a color index number of Pigment Violet 19, and a CAS number of 1047-16-1. This product has a density value of 1.5, a pH value of 6.8, and is used in coloring printing inks, paints, and pigment pr...展開 Fast Violet 4R is a pigment that is violet in color. It has a color index number of Pigment Violet 19, and a CAS number of 1047-16-1. This product has a density value of 1.5, a pH value of 6.8, and is used in coloring printing inks, paints, and pigment printing. 收起 | |
| Fast Violet Lake | Emperor Pigment Co., Ltd. | Fast Violet Lake is a reddish colored pigment that is used in offset inks, aqueous inks, and solvent inks. It has a color index number of Pigment Violet 3, a CAS number of 1325-82-2, and an EU number of 273-548-3. This product has a density value of 1.8 a...展開 Fast Violet Lake is a reddish colored pigment that is used in offset inks, aqueous inks, and solvent inks. It has a color index number of Pigment Violet 3, a CAS number of 1325-82-2, and an EU number of 273-548-3. This product has a density value of 1.8 and a pH value of 6. 收起 | |
| Fast Violet Toner R | Emperor Pigment Co., Ltd. | Fast Violet Toner R is a bluish colored pigment that is used in offset inks and aqueous inks. It has a color index number of Pigment Violet 3, a CAS number of 1325-82-2, and an EU number of 273-548-3. This product has a density value of 1.8 and a pH value...展開 Fast Violet Toner R is a bluish colored pigment that is used in offset inks and aqueous inks. It has a color index number of Pigment Violet 3, a CAS number of 1325-82-2, and an EU number of 273-548-3. This product has a density value of 1.8 and a pH value of 6. 收起 | |
| Fast Yellow 10G | Emperor Pigment Co., Ltd. | Fast Yellow 10G is a greenish yellow colored pigment that is used in air drying paints, offset inks, industrial paints, and in waterbased coatings. It has a density value of 1.6 and a pH value of 6.0 to 7.0. This product has a color index number of Pigmen...展開 Fast Yellow 10G is a greenish yellow colored pigment that is used in air drying paints, offset inks, industrial paints, and in waterbased coatings. It has a density value of 1.6 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 3, a CAS number of 6486-23-2, and an EU number of 229-355-1. 收起 | |
| Fast Yellow G | Emperor Pigment Co., Ltd. | Fast Yellow G is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 1, a CAS number of 2512-29-0, and an EU number of 219-730-8. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in air dry...展開 Fast Yellow G is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 1, a CAS number of 2512-29-0, and an EU number of 219-730-8. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in air drying paints, offset inks, industrial paints, and in waterbased coatings. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| OKO™ M-17 Linseed Oil | ADM | OKO™ M-17 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z7+ - Z8—. This product has applications in enamels, varnish...展開 OKO™ M-17 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z7+ - Z8—. This product has applications in enamels, varnishes, mastics, house paints, printing inks, and more. 收起 | |
| OKO™ M-2 1/2 Linseed Oil | ADM | OKO™ M-2 1/2 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z4— - Z4+. This product has applications in enamels, varn...展開 OKO™ M-2 1/2 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z4— - Z4+. This product has applications in enamels, varnishes, mastics, house paints, printing inks, and more. 收起 | |
| OKO™ M-25 Linseed Oil | ADM | OKO™ M-25 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z8— - Z8+. This product has applications in enamels, varnish...展開 OKO™ M-25 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z8— - Z8+. This product has applications in enamels, varnishes, mastics, house paints, printing inks, and more. 收起 | |
| OKO™ M-37 Linseed Oil | ADM | OKO™ M-37 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z9— - Z9+. This product has applications in enamels, varnish...展開 OKO™ M-37 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z9— - Z9+. This product has applications in enamels, varnishes, mastics, house paints, printing inks, and more. 收起 | |
| OKO™ M-7 1/2 Linseed Oil | ADM | OKO™ M-7 1/2 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z6+ - Z7—. This product has applications in enamels, varn...展開 OKO™ M-7 1/2 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z6+ - Z7—. This product has applications in enamels, varnishes, mastics, house paints, printing inks, and more. 收起 | |
| OKO™ S-37 Linseed Oil | ADM | OKO™ S-37 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z— - Z+. This product has applications in enamels, varnishes...展開 OKO™ S-37 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z— - Z+. This product has applications in enamels, varnishes, mastics, house paints, printing inks, and more. 收起 | |
| OKO™ S-70 Linseed Oil | ADM | OKO™ S-70 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z2+ - Z3—. This product has applications in enamels, varnish...展開 OKO™ S-70 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z2+ - Z3—. This product has applications in enamels, varnishes, mastics, house paints, printing inks, and more. 收起 | |
| OptiXan™ 40 | ADM | OptiXan™ 40 is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor, and a mesh size of 40. This product is intended for use in non-food applications as thickener and rheology contro...展開 OptiXan™ 40 is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor, and a mesh size of 40. This product is intended for use in non-food applications as thickener and rheology control agent, such as in paints, printing inks, and coatings. 收起 | |
| OptiXan™ Dispersible | ADM | OptiXan™ Dispersible is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor. This product is intended for use in non-food applications as thickener and rheology control agent, such ...展開 OptiXan™ Dispersible is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor. This product is intended for use in non-food applications as thickener and rheology control agent, such as in paints, printing inks, and coatings. 收起 | |
| Pale Grinders | ADM | Pale Grinders, in the form of amber clear liquid, is linseed oil with linseed fatty acids, high acidity, good wetting properties, and light in color. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more. | |
| Pale Litho | ADM | Pale Litho, in the form of amber clear liquid, is a heat polymerized linseed oil that is lighter colored and a lower acid number than regular litho oils. It has recommended applications in varnishes, paints, and lithographic inks. | |
| Permanent Yellow 1301 | Emperor Pigment Co., Ltd. | Permanent Yellow 1301 is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 13, a CAS number of 5102-83-0, and an EU number of 225-822-9. This product has a density value of 1.6, a pH value of 6.0 to 7...展開 Permanent Yellow 1301 is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 13, a CAS number of 5102-83-0, and an EU number of 225-822-9. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in NC inks, PA inks, offset inks, and PP inks. 收起 | |
| Permanent Yellow 1401 | Emperor Pigment Co., Ltd. | Permanent Yellow 1401 is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 14, a CAS number of 5468-75-7, and an EU number of 226-789-3. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used i...展開 Permanent Yellow 1401 is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 14, a CAS number of 5468-75-7, and an EU number of 226-789-3. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in PA inks, NC inks, and PP inks. 收起 | |
| Permanent Yellow 2G | Emperor Pigment Co., Ltd. | Permanent Yellow 2G is a pigment that is greenish yellow and transparent in color. It has a color index number of Pigment Yellow 17, a CAS number of 4531-49-1, and an EU number of 224-867-1. This product has a density value of 1.6, a pH value of 6.0 to 7....展開 Permanent Yellow 2G is a pigment that is greenish yellow and transparent in color. It has a color index number of Pigment Yellow 17, a CAS number of 4531-49-1, and an EU number of 224-867-1. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in offset inks. 收起 |
