| Alkyd Modified Acrylic Latex DTM Primer (Formulation #121813) | Vanderbilt Minerals, LLC | A formulation for an alkyd modified acrylic latex DTM primer which utilizes VAN GEL® SX, DARVAN® CN, BILT-PLATES® 156, and ACTIV-8®. | |
| Alkyd Modified Acrylic Latex Maintenance Primer (Formulation #120313) | Vanderbilt Minerals, LLC | A formulation for an alkyd modified acrylic latex maintenance primer which utilizes VAN GEL® ES, DARVAN® 7N, and ACTIV-8®. | |
| Aluminum Silicate, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...展開 Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. 收起 | |
| Calcium Carbonate, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...展開 Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm/ gauge 7+ NS. 收起 | |
| Dispersion-Silicate Facade Paint, Water Based (Formulation #F14402.0 [1]) | Hoffmann Mineral | 矽酸鹽乳液外牆塗料，水性 (配方#F14402.0 [1]) ，含SILLITIN N 85 | |
| Exterior Latex Deep Toned House Paint (Formulation #040212) | Vanderbilt Minerals, LLC | This formulation is for an exterior latex house paint which utilizes DARVAN® CN Dispersant, VANCIDE® MZ-98 Fungicide, and BILT-PLATES® 156 Clay. | |
| High Gloss White Coat Paint (Formulation #07-1021B) | Ashland | PVC20％ - Synaqua*4804 醇酸樹脂乳液高光白色面漆，含有AquaFlow™NLS-205和AquaFlow™NMS-450流變改性劑。 | |
| High Gloss White Top Coat - Higher Solids (Formulation #07-1022B) | Ashland | PVC20％ - Uradil* AZ785-Z52 醇酸樹脂乳液高光白色面漆，含有AquaFlow™NMS-450和AquaFlow™NHS-300流變改性劑。 | |
| High Gloss White Top Coat (Formulation #07-1023B) | Ashland | PVC19％ - Primal* HG74D 丙烯酸高光白色塗料，含有AquaFlow™NMS-450和AquaFlow™NHS-350流變改性劑。 | |
| High Gloss White Top Coat (Formulation #07-1024B) | Ashland | PVC19％ - Primal* HG74D - 丙烯酸高光白色塗料，含有AquaFlow™XLS-500和AquaFlow™NHS-300流變改性劑。 | |
| High Gloss White Top Coat (Formulation #07-1025B) | Ashland | PVC20％ - Uradil* AZ785-Z52 醇酸樹脂乳液高光白色面漆，含有AquaFlow™XLS-530和AquaFlow™NMS-450流變改性劑。 | |
| High Gloss White Top Coat (Formulation #07-1030B) | Ashland | 這個配方可於高光澤塗料，高光澤白色。它含AquaFlow™NMS-450，AquaFlow™NHS-350，NUOSEPT®BIC和DEXTROL®OC180。 | |
| High Gloss White Top Coat (Formulation #07-1075A) | Ashland | This PVC 20% - NeoPac PU 580 urethane alkyd emulsion high gloss white top coat features Aquaflow™ NHS-350E. | |
| High Quality Facade Paint, Solvent-based (Formulation #F20102.0 [1]) | Hoffmann Mineral | 高品質外牆塗料，溶劑型（配方#F20102.0 [1]），含SILLITIN Z 89 | |
| Interior / Exterior Deeptone Base Paint (Formulation #07-1051) | Ashland | PVC 30% - glocryl* GR 1237 – pure acrylic deeptone base paint featuring aquaflow™ XLS-530E and aquaflow™ NHS-350E, nonionic synthetic associative thickeners (NSAT). | |
| Interior / Exterior Deeptone Base Paint (Formulation #07-1053) | Ashland | PVC 30% - makeean* M818 – pure acrylic deeptone base paint featuring aquaflow™ XLS-530E and aquaflow™ NHS-350E, nonionic synthetic associative thickeners (NSAT). | |
| Interior / Exterior Deeptone Base Paint (Formulation #07-1055) | Ashland | PVC 30% - acronal* S559 – styrene acrylic deeptone base paint featuring aquaflow™ NLS-220E and aquaflow™ NHS-300E, nonionic synthetic associative thickener (NSAT). | |
| Interior / Exterior Deeptone Base Paint (Formulation #07-1057) | Ashland | PVC 30% - acronal* S559 – styrene acrylic deeptone base paint featuring aquaflow™ XLS-530E and aquaflow™ NHS-300E, nonionic synthetic associative thickener (NSAT). | |
| Interior / Exterior Deeptone Semi Gloss Paint (Formulation #07-1018B) | Ashland | PVC43％ - Acronal* S-559 苯丙烯酸深色調半光澤塗料，含有AquaFlow™XLS-500和AquaFlow™NHS-300流變改性劑。 | |
| Interior / Exterior Semi Gloss Paint (Formulation #07-1031B) | Ashland | PVC30％ - NEOCRYL* XK-90 丙烯酸半光白色塗料，含有AquaFlow™XLS-500和AquaFlow™NHS-300流變改性劑。 | |
| Interior / Exterior Semi Matt Paint Formula (Formulation #07-1066A) | Ashland | PVC 38% - Acronal* S559 styrene acrylic semi-matt white paint. | |
| Interior / Exterior Semi Matt Paint (Formulation #07-1034A) | Ashland | PVC38％ - Acronal* S559 苯乙烯丙烯酸內飾半啞光白漆，含有Natrosol™HE 3KB疏水改性的羥乙基纖維素（HMHEC）及AquaFlow™NMS-450流變改性劑。 | |
| Interior / Exterior Semi Matt Paint (Formulation #07-1035A) | Ashland | PVC38％ - Mowilith* LDM1871 醋酸乙烯酯乙烯內飾半啞光白漆，含有Natrosol™HE 3KB疏水改性的羥乙基纖維素（HMHEC）。 | |
| Interior / Exterior Semi-Gloss Paint (Formulation #07-1032B) | Ashland | PVC30％ - NEOCRYL* XK-90 丙烯酸半光白色塗料，含有AquaFlow™XLS-530和AquaFlow™NHS-350流變改性劑。 | |
| Interior / Exterior Semi-Matt Paint (Formulation #07-1033B) | Ashland | PVC38％ - Mowilith*LDM1871 醋酸乙烯酯乙烯內飾半亞光白漆，含有Natrosol Plus™330疏水改性的羥乙基纖維素（HMHEC）及AquaFlow™NMS-450流變改性劑。 | |
| Interior / Exterior Semi-Matt Paint (Formulation #07-1036B) | Ashland | PVC38％ - ALBERDINGK*AS6002 苯乙烯丙烯酸內飾半啞光白漆，含有Natrosol™Plus330疏水改性的羥乙基纖維素（HMHEC）。 | |
| Interior / Exterior Semi-Matt Paint (Formulation #07-1037B) | Ashland | PVC38％ -Vinnapas* EZ3010 醋酸乙烯酯乙烯內飾半啞光白漆，含有Natrosol™Plus 330疏水改性的羥乙基纖維素（HMHEC）。 | |
| Interior / Exterior White Pastel Base (Formulation #07-1052) | Ashland | PVC 30% - makeean* M818 – pure acrylic white pastel base paint featuring aquaflow™ XLS-530E and aquaflow™ NHS-350E, nonionic synthetic associative thickener (NSAT). | |
| Interior / Exterior White Pastel Base (Formulation #07-1054) | Ashland | PVC 30% - acronal* S559 – styrene acrylic white pastel base paint featuring aquaflow™ NLS-220E and aquaflow™ NHS-300E, nonionic synthetic associative thickeners (NSAT). | |
| Interior / Exterior White Pastel Base (Formulation #07-1056) | Ashland | PVC 30% - acronal* S559 – styrene acrylic white pastel base paint featuring aquaflow™ XLS-530E and aquaflow™ NHS-300E, nonionic synthetic associative thickener (NSAT). | |
| Interior Flat Paint (Formulation #07-1047A) | Ashland | PVC 85% - Acronal* S790 styrene acrylic interior flat white paint. | |
| Interior Flat Paint (Formulation #07-1048A) | Ashland | PVC 85% - Acronal* S790 styrene acrylic interior flat white paint. | |
| Interior/Exterior Deep Tone, Base Paint (Formulation #07-1046) | Ashland | PVC 30% - Glocryl* GR 1237 - Pure acrylic, deep tone, base paint featuring Aquaflow™ XLS-530E and Aquaflow™ NHS-350E rheology modifiers. | |
| Interior/Exterior Depp Tone, Base Paint (Formulation #07-1050A) | Ashland | PVC 30% - Acronal* S559 - Styrene acrylic, deep tone, base paint featuring Aquaflow™ NLS-220E and Aquaflow™ NHS-300E rheology modifiers. | |
| Interior/Exterior Gloss Paint (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展開 Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved- 7+ NS/ <10 μm. 收起 | |
| Interior/Exterior Matt Paint (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展開 Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. 5+ NS/ min. of 20 μm. 收起 | |
| Interior/Exterior Semi Glossy Paint Waterborne Coatings (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展開 Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. -7 NS/ min. of 15 μm. 收起 | |
| Interior/Exterior Semi-Matt Paint (Formulation #07-1039B) | Ashland | PVC 38% - Acronal S559* styrene acrylic semi-matt white paint. | |
| Interior/Exterior White Pastel Base (Formulation #07-1049A) | Ashland | PVC 30% - Acronal* S559 - Styene acrylic, white pastel, base paint featuring Aquaflow™ NLS-220E and Aquaflow™ NHS-300E rheology modifiers. | |
| Internal/External White Pastel Base (Formulation #07-1045) | Ashland | PVC 30% - Glocryl* GR 1237 - Pure acrylic white pastel, base paint featuring Aquaflow™ XLS-530E and Aquaflow™ NHS-350E rheology modifiers. | |
| Matt Paint 1 (Formulation #SPF_CTG_021_2203) | Arkema Rheology & Specialty Additives | This matt paint features Ecodis™ P 50. | |
| Matt Paint 2 (Formulation #SPF_CTG_022_2203) | Arkema Rheology & Specialty Additives | This matt paint features Ecodis™ P 50. | |
| Matt Paint 3 (Formulation #SPF_CTG_023_2203) | Arkema Rheology & Specialty Additives | This matt paint features Ecodis™ P 50. | |
| Talc, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展開 Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. 收起 | |
| Water Based Alkali and Efflorescence Resistant Primer based on PLIOTEC® SA 40 (Formulation #WB ARP 02) | Omnova Solutions | This formulation produces an alkali resistant primer. It features PLIOTEC® SA40. | |
| Water-borne Alkyd Emulsion Red Iron Oxide Primer (Formulation #111413) | Vanderbilt Minerals, LLC | A formulation for a water-borne alkyd emulsion red iron oxide primer which utilizes VAN GEL® SX, DARVAN® CN, VANSIL® W-30, and ACTIV-8®. | |
| White Gloss Topcoat (Formulation #07-1071) | Ashland | PVC 12% - Primal* HG-98, pure acrylic polymer dispersion - interior & exterior white paint. | |
| White Gloss Topcoat (Formulation #07-1072) | Ashland | PVC 12% - Primal* HG-98, pure acrylic polymer dispersion - interior & exterior white paint. | |
| Zinc Oxide, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展開 Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. 收起 |
