| A 135 | BIP (Oldbury) Ltd | A 135 is a non ionic polyethylene emulsion, in a low viscosity liquid. It is used primarily to improve tear strength and can be used on any fabric. | |
| ACCULIN® 1000 (2071A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1000 is a hard, high melting point polyethylene. | |
| ACCULIN® 1500 (2057A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is an extremely pure, inert, narrow melt point product that exhibits very specific expansion behavior. | |
| ACCULIN® 1500 (2073A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is a hard, low melting point polyethylene. | |
| ACCULIN® 2000 (2074A) | The International Group, Inc. (IGI Wax) | ACCULIN® 2000 is a hard, high melting point polyethylene. | |
| ACCULIN® 500 (2056A) | The International Group, Inc. (IGI Wax) | ACCULIN® 500 is a hard, low melting point polyethylene. | |
| ACCULIN® 600 (2059A) | The International Group, Inc. (IGI Wax) | ACCULIN® 600 is a hard, low melting point polyethylene. | |
| ACCULIN® 655 (2061A) | The International Group, Inc. (IGI Wax) | ACCULIN® 655 is a hard, low melting point polyethylene. | |
| ACCULIN® 725 (2063A) | The International Group, Inc. (IGI Wax) | ACCULIN® 725 is a hard, low melting point polyethylene. | |
| AQUACER 1040 | BYK | AQUACER 1040 is a primary polyethylene dispersion for formulating release agents for metal die casting. | |
| AQUACER 1063 | BYK | AQUACER 1063 is a polyethylene dispersion to improve the anti-caking properties of hot-melt adhesives and to increase adhesion in dispersion adhesives for the packaging sector. | |
| Chlorinated Polyolefin-YURON CP 20 | Yuron New Material | YURON CP 20 is composed of chlorinated polyolefin and is supplied as a white powder that is immiscible in water. This product is recommended as a binder for plastic or steel coatings. | |
| Dispurez 101 | Incorez Ltd. | Dispurez 101 is a high Tg, hard, crystalline waterborne polyurethane dispersion with excellent chemical resistance. It is suitable for clear protective top coats and lacquers. Upon application, the water evaporates to yield a tough, transparent film with ...展開 Dispurez 101 is a high Tg, hard, crystalline waterborne polyurethane dispersion with excellent chemical resistance. It is suitable for clear protective top coats and lacquers. Upon application, the water evaporates to yield a tough, transparent film with good gloss. Films derived from Dispurez 101 exhibit excellent water and chemical resistance. The product exhibits rapid hardness development and is therefore suitable for a wide range of end applications in the surface coatings industries. It is particularly suitable as a hard coating for rigid plastic substrates. 收起 | Request Sample |
| EBECRYL® 11 | Allnex | EBECRYL® 11 is a polyethylene glycol diacrylate derivative. Ebecryl®11, being 100% water soluble, is designed for use in applications needing this type of solubility. | Request Sample |
| Flexonic™ EN41 E | Lawter | Flexonic™ EN41 E is a polyethylene emulsion that displays scratch, rub, slip and block resistant properties. It is used as an additive in water-based coatings, inks and overprint varnishes and has good compatibility with styrene acrylics and acrylics. The...展開 Flexonic™ EN41 E is a polyethylene emulsion that displays scratch, rub, slip and block resistant properties. It is used as an additive in water-based coatings, inks and overprint varnishes and has good compatibility with styrene acrylics and acrylics. The product is used in aqueous inks and coatings. 收起 | |
| Flexonic™ W378 E | Lawter | Flexonic™ W378 E is a polyethylene emulsion that is APE-free and exhibits scratch, rub, slip and block resistant properties. It has minimal effect on gloss, while showing good compatibility with styrene acrylics and acrylics. The product is used in aqueou...展開 Flexonic™ W378 E is a polyethylene emulsion that is APE-free and exhibits scratch, rub, slip and block resistant properties. It has minimal effect on gloss, while showing good compatibility with styrene acrylics and acrylics. The product is used in aqueous inks and coatings. 收起 | |
| High Chlorinated Polyethylene-YURON HCPE | Yuron New Material | High Chlorinated Polyethylene-YURON HCPE is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance an...展開 High Chlorinated Polyethylene-YURON HCPE is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance and ozone resistance. HCPE can replace chlorinated rubber in many application areas. HCPE is mainly used to produce wear resistant, heavy corrosion resistant and self-extinguishing coatings. As coatings, it can be used in chemical equipment, oil field pipelines, offshore facilities, ship coatings, metallurgy and mine, salt industry, fishing ground, wastes treatment, transportation facilities, container and electrical equipment. 收起 | |
| High Chlorinated Polyethylene-YURON HCPE-M | Yuron New Material | High Chlorinated Polyethylene-YURON HCPE-M is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance ...展開 High Chlorinated Polyethylene-YURON HCPE-M is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance and ozone resistance. HCPE can replace chlorinated rubber in many application areas. HCPE is mainly used to produce wear resistant, heavy corrosion resistant and self-extinguishing coatings. As coatings, it can be used in chemical equipment, oil field pipelines, offshore facilities, ship coatings, metallurgy and mine, salt industry, fishing ground, wastes treatment, transportation facilities, container and electrical equipment. 收起 | |
| High Performance High Chlorinated Polyethylene-YURON HPE 1305 | Yuron New Material | High Performance High Chlorinated Polyethylene-YURON HPE 1305 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...展開 High Performance High Chlorinated Polyethylene-YURON HPE 1305 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. 收起 | |
| High Performance High Chlorinated Polyethylene-YURON HPE 1505 | Yuron New Material | YURON HPE 1505 is a high performance, high-chlorinated polyethylene. It is supplied as a white powder and is immiscible in water. This product is mainly used to promote wear resistance, heavy corrosion resistance, and to produce self-extinguishing coating...展開 YURON HPE 1505 is a high performance, high-chlorinated polyethylene. It is supplied as a white powder and is immiscible in water. This product is mainly used to promote wear resistance, heavy corrosion resistance, and to produce self-extinguishing coatings and high quality printing ink. 收起 | |
| High Performance High Chlorinated Polyethylene-YURON HPE 1510 | Yuron New Material | High Performance High Chlorinated Polyethylene-YURON HPE 1510 has a viscosity at 25°C that is 40% in xylene at 150-250 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...展開 High Performance High Chlorinated Polyethylene-YURON HPE 1510 has a viscosity at 25°C that is 40% in xylene at 150-250 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. 收起 | |
| High Performance High Chlorinated Polyethylene-YURON HPE 1515 | Yuron New Material | High Performance High Chlorinated Polyethylene-YURON HPE 1515 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...展開 High Performance High Chlorinated Polyethylene-YURON HPE 1515 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. 收起 | |
| Luna-tex RC3940F | DKSH | Luna-tex RC3940F is a stable combination of modified PTFE and polyethylene waxes for producing a high abrasion resistant and uniform surface texture for powder coatings. The product offers a very consistent textured surface effect. This product is availab...展開 Luna-tex RC3940F is a stable combination of modified PTFE and polyethylene waxes for producing a high abrasion resistant and uniform surface texture for powder coatings. The product offers a very consistent textured surface effect. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| PE Wax Sunax 316 | Yantai Suny Chem International Co., Ltd. | PE Wax Sunax 316 is a kind of polyethylene wax. It has uniform particle size, with very good dispersability and gloss control, and is an excellent additive for high gloss coatings. It is suitable for solvent-based flexo inks and gravure inks. It can impro...展開 PE Wax Sunax 316 is a kind of polyethylene wax. It has uniform particle size, with very good dispersability and gloss control, and is an excellent additive for high gloss coatings. It is suitable for solvent-based flexo inks and gravure inks. It can improve the abrasion resistance, and reduce the coefficient of friction of solvent-based inks. 收起 | |
| PE Wax Sunax 375 | Yantai Suny Chem International Co., Ltd. | PE Wax Sunax 375 is a kind of polyethylene wax. It has uniform particle size, is easy to disperse, and is an excellent additive for high performance coatings. Sunax 375 is suitable for offset printing ink, and solvent based flexo printing ink, and gravure...展開 PE Wax Sunax 375 is a kind of polyethylene wax. It has uniform particle size, is easy to disperse, and is an excellent additive for high performance coatings. Sunax 375 is suitable for offset printing ink, and solvent based flexo printing ink, and gravure inks. It can improve the abrasion resistance, and reduce the coefficient of friction of solvent-based inks. It makes the ink of the benzene soluble and alcohol-soluble ink to have good ester adaptability. 收起 | |
| POLYBATCH® CRR 3971 | ICO Polymers | POLYBATCH® CRR 3971 is a low density polyethylene masterbatch combined with a chill roll release agent. This solid pellet prevents low density polyethylene (LDPE) from chill roll sticking during extrusion without damaging the adhesion of the resin to the ...展開 POLYBATCH® CRR 3971 is a low density polyethylene masterbatch combined with a chill roll release agent. This solid pellet prevents low density polyethylene (LDPE) from chill roll sticking during extrusion without damaging the adhesion of the resin to the substrate. POLYBATCH® CRR 3971 is used in extrusion lamination, coextrusion coating, and for coatings on different substrates such as kraft, board and paper, aluminum foil, and flexible films. It is also used in extrusion coating applications where chill roll adhesion occurs under normal circumstances, and at very high line speeds featuring high chill roll temperatures and use of a glossy chill roll finish. 收起 | |
| PTFE Wax Sunax PTFE204 | Yantai Suny Chem International Co., Ltd. | PTFE Wax Sunax PTFE204 is a kind of PTFE wax. It has color white appearance, is ultra fine with evenly distributed particles, more delicate texture, and dispersed in good case for great scratch resistance properties. In coating application, it can make th...展開 PTFE Wax Sunax PTFE204 is a kind of PTFE wax. It has color white appearance, is ultra fine with evenly distributed particles, more delicate texture, and dispersed in good case for great scratch resistance properties. In coating application, it can make the product have a very low coefficient of friction, and provides excellent abrasion and scratch resistance. Its main role on coating is to improve the lubrication of the paint, as well as the abrasion and corrosion resistance. 收起 | |
| Ultrapoly™ 210 E | Lawter | Ultrapoly™ 210 E is a wax compound with a polyethylene, alkyd and vegetable oil base. It has low peppering and particle size attributes, good gloss and shows rub resistance and resistance to particle size growth. The product also displays good slip and an...展開 Ultrapoly™ 210 E is a wax compound with a polyethylene, alkyd and vegetable oil base. It has low peppering and particle size attributes, good gloss and shows rub resistance and resistance to particle size growth. The product also displays good slip and anti-blocking behavior. It is used as a wax compound in quickset, sheet-fed and heatset inks. 收起 | |
| Ultrapoly™ 990 E | Lawter | Ultrapoly™ 990 E is a wax compound from polyethylene wax and vegetable oil. It has good rub, abrasion and scratch resistance with good slip and anti-blocking benefits. The product also shows good gloss, is non-volatile and is used as a wax compound in qui...展開 Ultrapoly™ 990 E is a wax compound from polyethylene wax and vegetable oil. It has good rub, abrasion and scratch resistance with good slip and anti-blocking benefits. The product also shows good gloss, is non-volatile and is used as a wax compound in quickset, sheet-fed and heatset inks. 收起 |
