| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| AFCONA - 2020 | AFCONA Additives Sdn Bhd | AFCONA – 2020 is a silicone-free modified polyvinyl polymer in a SBP spirit solvent. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, and finds application in solvent-based coatings, printing inks, and th...展開 AFCONA – 2020 is a silicone-free modified polyvinyl polymer in a SBP spirit solvent. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, and finds application in solvent-based coatings, printing inks, and thermosetting resin systems. 收起 | |
| AFCONA - 2040 | AFCONA Additives Sdn Bhd | AFCONA – 2040 is a silicone-containing defoamer with fluorocarbon in a diisobutyl ketone solvent. This clear liquid is compatible with most resin systems and prevents the formation of foam and blisters during manufacture and application with minimal side ...展開 AFCONA – 2040 is a silicone-containing defoamer with fluorocarbon in a diisobutyl ketone solvent. This clear liquid is compatible with most resin systems and prevents the formation of foam and blisters during manufacture and application with minimal side effects. AFCONA – 2040 finds application in low to high polar paint systems, physical drying systems based on acrylic, vinyl, or chlorinated polymers, in polyurethane wood, plastic, and car refinishes, in airless spraying coats, in NC lacquers and acid curing wood and general industrial coatings, in stoving paints, in solvent-based epoxy systems, and in printing inks. 收起 | |
| AFCONA - 2503 | AFCONA Additives Sdn Bhd | AFCONA – 2503 is an organically modified polysiloxane appeating as a transparent to slightly yellow liquid. This product functions as a water-based defoamer and anti-foaming agent which provides levelling and crater-resistant properties in water-based coa...展開 AFCONA – 2503 is an organically modified polysiloxane appeating as a transparent to slightly yellow liquid. This product functions as a water-based defoamer and anti-foaming agent which provides levelling and crater-resistant properties in water-based coatings and high shear applications such as pigment concentrate preparations. AFCONA – 2503 finds application in high speed flexo printing processes, polyurethane dispersions, acrylic-based decorative paints, and printing inks. 收起 | |
| AFCONA - 2524 | AFCONA Additives Sdn Bhd | AFCONA – 2524 is a silicone-containing defoamer in a water and hydrocarbon solvent. This white to slightly yellow emulsion functions as a defoamer in water-based polyurethane and acrylic-based emulsions. AFCONA – 2524 can be used as a levelling agent and ...展開 AFCONA – 2524 is a silicone-containing defoamer in a water and hydrocarbon solvent. This white to slightly yellow emulsion functions as a defoamer in water-based polyurethane and acrylic-based emulsions. AFCONA – 2524 can be used as a levelling agent and is easy to incorporate under low shear forces, finding application in coatings and printing inks. 收起 | |
| AFCONA - 2720 | AFCONA Additives Sdn Bhd | AFCONA – 2720 is a silicone-free polymer in an alkylbenzene and SBP spirit solvent. This slightly yellow liquid functions as an anti-foam and de-aeration additive for use in unsaturated polyesters, coil and can coatings, two-pack epoxies, polyester/melami...展開 AFCONA – 2720 is a silicone-free polymer in an alkylbenzene and SBP spirit solvent. This slightly yellow liquid functions as an anti-foam and de-aeration additive for use in unsaturated polyesters, coil and can coatings, two-pack epoxies, polyester/melamine stoving systems, PVC compounds, and printing inks. 收起 | |
| AFCONA - 2721 | AFCONA Additives Sdn Bhd | AFCONA – 2721 is a silicone-based defoamer in a 2-ethylhexylacrylate solvent. This clear to slightly yellow liquid functions as an anti-foam, de-aerating, cross-linking agent that does not provide haziness and has wide compatibility. AFCONA – 2721 finds a...展開 AFCONA – 2721 is a silicone-based defoamer in a 2-ethylhexylacrylate solvent. This clear to slightly yellow liquid functions as an anti-foam, de-aerating, cross-linking agent that does not provide haziness and has wide compatibility. AFCONA – 2721 finds application in ultraviolet coatings, in pigmented or non-pigmented resin systems, and in printing inks. 收起 | |
| AFCONA - 3033 | AFCONA Additives Sdn Bhd | AFCONA – 3033 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3033 finds applica...展開 AFCONA – 3033 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3033 finds application in wood and clear coatings, thermoplastic resins, NC, acid curing, polyurethanes, and in printing inks. 收起 | |
| AFCONA - 3231 | AFCONA Additives Sdn Bhd | AFCONA – 3231 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive mainly used in metal and ultraviolet coatings while visually enhancing film thickness. AFCONA – 3231 finds appl...展開 AFCONA – 3231 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive mainly used in metal and ultraviolet coatings while visually enhancing film thickness. AFCONA – 3231 finds application in metal coatings such as industrial baking systems, car refinish polyurethane top clear coats, and in printing inks. 收起 | |
| AFCONA - 3250 | AFCONA Additives Sdn Bhd | AFCONA – 3250 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, has transparency, and can be used in all solvent-based systems where slip is desired and foam sta...展開 AFCONA – 3250 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, has transparency, and can be used in all solvent-based systems where slip is desired and foam stabilization is not. AFCONA – 3250 finds application in wood coating systems including NC, acid curing, polyurethane and ultraviolet, top coats in plastic coatings application, refinish topcoats based on polyurethane, ultraviolet coatings, and printing inks. 收起 | |
| AFCONA - 3280 | AFCONA Additives Sdn Bhd | AFCONA – 3280 is a special organically modified polysiloxane. This clear to slightly yellow liquid is soluble in aliphatic and aromatic hydrocarbons, esters, and ketones, and insoluble in water. It functions as a moderate slip, anti-foam, and de-aeration ...展開 AFCONA – 3280 is a special organically modified polysiloxane. This clear to slightly yellow liquid is soluble in aliphatic and aromatic hydrocarbons, esters, and ketones, and insoluble in water. It functions as a moderate slip, anti-foam, and de-aeration additive with an anti-floating effect, while improving surface leveling and smoothness without causing intercoat adhesion. AFCONA – 3280 provides hot water resistance, and finds application in stoving enamels based on alkyd- , acrylic-, or polyester resins, in acid curing and polyurethane wood coatings, in self-leveling epoxy flooring compounds, and in ultraviolet-curing inks and coatings. 收起 | |
| AFCONA - 3670 | AFCONA Additives Sdn Bhd | AFCONA – 3670 is a fluorocarbon modified polyacrylic. This clear to slightly yellow liquid functions as a leveling, anti-crater, and substrate wetting agent that manages surface control and lowers surface tension. AFCONA – 3670 acts as an anti-foam and de...展開 AFCONA – 3670 is a fluorocarbon modified polyacrylic. This clear to slightly yellow liquid functions as a leveling, anti-crater, and substrate wetting agent that manages surface control and lowers surface tension. AFCONA – 3670 acts as an anti-foam and de-aeration aid, does not interfere with intercoat adhesion, and finds application in solvent-based coatings such as baking paints, polyurethane coatings, epoxies, and printing inks. 收起 | |
| AFCONA - 3770 | AFCONA Additives Sdn Bhd | AFCONA – 3770 is a fluorocarbon modified acrylic polymer. This clear to slightly yellow liquid functions as a leveling agent with anti-foam, anti-crater, and de-aeration properties while improving substrate wetting, and without interfering with intercoat ...展開 AFCONA – 3770 is a fluorocarbon modified acrylic polymer. This clear to slightly yellow liquid functions as a leveling agent with anti-foam, anti-crater, and de-aeration properties while improving substrate wetting, and without interfering with intercoat adhesion. AFCONA – 3770 finds application in two-pack polyurethane and epoxy coatings, air-drying alkyd paints, baking enamels such as coil and can coatings, matt finish wood coatings, and in printing inks. 收起 | |
| AFCONA - 3772 | AFCONA Additives Sdn Bhd | AFCONA – 3772 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid functions as a leveling and surface tension reduction agent that increases the polarity of the polymer, making it compatible with common resins used in coatings. I...展開 AFCONA – 3772 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid functions as a leveling and surface tension reduction agent that increases the polarity of the polymer, making it compatible with common resins used in coatings. It provides no in-can haziness, anti-flooding and floating properties, prevents craters and orange peel, and helps improve substrate wetting performance. AFCONA – 3772 finds application in aqueous and non-aqueous coatings, solvent-based coatings, high gloss clear coatings, pigmented and matted primers, and in printing inks. 收起 | |
| AFCONA - 4047 | AFCONA Additives Sdn Bhd | AFCONA – 4047 is a modified polyurethane polymer in a butylacetate, methoxy propyl acetate, and sec-butanol solution. This product is a high molecular weight polymeric dispersant for the deflocculation of pigments, and provides improved gloss and DOI, red...展開 AFCONA – 4047 is a modified polyurethane polymer in a butylacetate, methoxy propyl acetate, and sec-butanol solution. This product is a high molecular weight polymeric dispersant for the deflocculation of pigments, and provides improved gloss and DOI, reduced flooding, color strength, and low viscosity. AFCONA – 4047 finds application in high quality coatings such as OEM’s, refinishes, can coating, and coil coatings, and in printing inks. 收起 | |
| AFCONA - 4071 | AFCONA Additives Sdn Bhd | AFCONA – 4071 is a modified polyurethane polymer in a butylacetate, methoxy propyl acetate, sec-butanol, and xylene solution. This product functions as a high molecular weight polymeric dispersant for pigments to increase the stability and performance of ...展開 AFCONA – 4071 is a modified polyurethane polymer in a butylacetate, methoxy propyl acetate, sec-butanol, and xylene solution. This product functions as a high molecular weight polymeric dispersant for pigments to increase the stability and performance of tinting strength and color brightness, and in carbon blacks to provide blue undertones with high jetness. AFCONA – 4071 finds application in paints, coatings, and printing inks. 收起 | |
| AFCONA - 4201 | AFCONA Additives Sdn Bhd | AFCONA – 4201 is a modified polyurethane polymer that functions as a high molecular weight polymeric dispersant for the deflocculation of pigments. This product provides improved steric hindrance, pigment stability, color, gloss, and is almost 100% solven...展開 AFCONA – 4201 is a modified polyurethane polymer that functions as a high molecular weight polymeric dispersant for the deflocculation of pigments. This product provides improved steric hindrance, pigment stability, color, gloss, and is almost 100% solvent free. AFCONA – 4201 is suitable for use in polyurethane, epoxy, polyester/melanine, alkyd/melanine, acid curing, NC, and ultraviolet systems, finding application in high solid coatings, and ink formulations. 收起 | |
| AFCONA - 4530 | AFCONA Additives Sdn Bhd | AFCONA – 4530 is a modified polyurethane polymer in a solution of water. This product functions as a high molecular weight, pH independent polymeric dispersant for the deflocculation and stabilization of organic and inorganic pigments. AFCONA – 4530 is VO...展開 AFCONA – 4530 is a modified polyurethane polymer in a solution of water. This product functions as a high molecular weight, pH independent polymeric dispersant for the deflocculation and stabilization of organic and inorganic pigments. AFCONA – 4530 is VOC free and provides increased color strength, pigment stability, color development, and less foam formation, finding application in water-based coatings, decorative and industrial paints, and printing inks. 收起 | |
| AFCONA - 4570 | AFCONA Additives Sdn Bhd | AFCONA – 4570 is a modified polyacrylate polymer in a tripropylene glycol methyl ether (TPM) solution. This product functions as a high molecular weight dispersing agent for color acceptance and resin free pigment concentrate preparations. It stabilizes c...展開 AFCONA – 4570 is a modified polyacrylate polymer in a tripropylene glycol methyl ether (TPM) solution. This product functions as a high molecular weight dispersing agent for color acceptance and resin free pigment concentrate preparations. It stabilizes carbon blacks and inorganic and organic pigments while providing stability performance, gloss, color strength, and improved color acceptance. AFCONA – 4570 finds application in water and solvent-based decorative and industrial coatings, and in printing inks. 收起 | |
| AFCONA - 5207 | AFCONA Additives Sdn Bhd | AFCONA – 5207 is a hydroxyl functional unsaturated modified carboxylic acid with pigment affinity groups appearing as a transparent yellow to brown liquid. AFCONA – 5207 functions as a wetting and dispersing additive for solvent -based architectural and d...展開 AFCONA – 5207 is a hydroxyl functional unsaturated modified carboxylic acid with pigment affinity groups appearing as a transparent yellow to brown liquid. AFCONA – 5207 functions as a wetting and dispersing additive for solvent -based architectural and decorative paints, as a dispersant for printing inks, and in thermoplastic acrylics, NC combinations, acid curing systems, and baking paints. 收起 | |
| AFCONA - 5280 | AFCONA Additives Sdn Bhd | AFCONA – 5280 is a cationic and anionic co-polymer with pigment affinity groups. This dark brown liquid functions as a wetting and dispersing additive for solvent-based paints, and as an economic pigment stabilizer. AFCONA – 5280 finds application in alky...展開 AFCONA – 5280 is a cationic and anionic co-polymer with pigment affinity groups. This dark brown liquid functions as a wetting and dispersing additive for solvent-based paints, and as an economic pigment stabilizer. AFCONA – 5280 finds application in alkyd based systems such as NC, stoving paints, and air-drying alkyds, and in oil and solvent-based printing inks. 收起 | |
| AFCONA - 5285 | AFCONA Additives Sdn Bhd | AFCONA – 5285 is an anionic co-polymer with acidic groups. This yellow to dark brown liquid functions as a wetting and dispersing additive for solvent-based paints. AFCONA – 5285 provides anchoring in base pigments for inorganic pigments and matting agent...展開 AFCONA – 5285 is an anionic co-polymer with acidic groups. This yellow to dark brown liquid functions as a wetting and dispersing additive for solvent-based paints. AFCONA – 5285 provides anchoring in base pigments for inorganic pigments and matting agents, and reduces viscosity in filler and extender dispersions, finding application in oil and solvent-based printing inks in alcohol rich systems. 收起 | |
| AFCONA - 5290 | AFCONA Additives Sdn Bhd | AFCONA – 5290 is a polymer with pigment affinity groups. This product consists of high molecular weight dispersants and is used for high solid systems and formulations and provides pigment stability, performance, and color strength. AFONCA – 5290 finds ap...展開 AFCONA – 5290 is a polymer with pigment affinity groups. This product consists of high molecular weight dispersants and is used for high solid systems and formulations and provides pigment stability, performance, and color strength. AFONCA – 5290 finds application in solvent-based systems from low to high polarity including air dry alkyds, in high solid coatings such as polyurethane, epoxy, and ultraviolet coatings, and as a dispersant for ink formulations. 收起 | |
| AFCONA - 6225 | AFCONA Additives Sdn Bhd | AFCONA – 6225 is a fatty acid modified polyester that functions as a dispersant and emulsifier for universal colorants while performing as a color acceptance additive. This dark brown liquid functions as a dispersing agent in decorative paints, finding ap...展開 AFCONA – 6225 is a fatty acid modified polyester that functions as a dispersant and emulsifier for universal colorants while performing as a color acceptance additive. This dark brown liquid functions as a dispersing agent in decorative paints, finding application as an emulsifier of water into solvent-based coatings, as an activator for bentonites and acrylic thickeners, and in printing inks. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| AW 300 | AB Chimica srl | AW 300, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 68% of pigment type titanium dioxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high ...展開 AW 300, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 68% of pigment type titanium dioxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 300 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 304 | AB Chimica srl | AW 304, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of blue beta copper phthalocyanine NCNF. The AW 300 series is regarded as a non-yellowing acrylic resin that is ve...展開 AW 304, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of blue beta copper phthalocyanine NCNF. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 304 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 305 | AB Chimica srl | AW 305, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 44% of pigment type of transparent red iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resista...展開 AW 305, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 44% of pigment type of transparent red iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 305 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 307 | AB Chimica srl | AW 307, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 55% of pigment type yellow iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high...展開 AW 307, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 55% of pigment type yellow iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 307 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 308 | AB Chimica srl | AW 308, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of azoic red P.R. 112. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with ...展開 AW 308, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of azoic red P.R. 112. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 308 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 312 | AB Chimica srl | AW 312, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 60% of pigment type red iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high we...展開 AW 312, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 60% of pigment type red iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 312 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 320 | AB Chimica srl | AW 320, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 45% of pigment type of arylamide yellow. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with hi...展開 AW 320, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 45% of pigment type of arylamide yellow. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 320 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 321 | AB Chimica srl | AW 321, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 45% of pigment type of dinitoaniline orange. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant wit...展開 AW 321, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 45% of pigment type of dinitoaniline orange. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 321 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 336 | AB Chimica srl | AW 336, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of green chlorinated copper phthalocyanine. The AW 300 series is regarded as a non-yellowing acrylic resin that is...展開 AW 336, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of green chlorinated copper phthalocyanine. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 336 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 341 | AB Chimica srl | AW 341, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 30% of pigment type of dioxazine violet. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with hi...展開 AW 341, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 30% of pigment type of dioxazine violet. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 341 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 344 | AB Chimica srl | AW 344, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type transparent yellow iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resista...展開 AW 344, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type transparent yellow iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 344 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 390B | AB Chimica srl | AW 390B, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 25% of pigment type of quinacridone magenta. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant wi...展開 AW 390B, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 25% of pigment type of quinacridone magenta. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 390B is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| AW 397 | AB Chimica srl | AW 397, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 35% of pigment type medium jetness black MCF. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant wi...展開 AW 397, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 35% of pigment type medium jetness black MCF. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 397 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. 收起 | |
| Black Pigment Paste | Colour India | Black Pigment Paste is a non-flammable, water-insoluble solvent. This product appears as a thick, viscous liquid and can be used in water-based inks and textile printing applications. | |
| Blue Pigment Paste | Colour India | Blue Pigment Paste is a non-flammable, water-insoluble solvent. This product appears as a thick, viscous liquid and can be used in water-based inks and textile printing applications. | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Copper Phthalocyanine Green G | Colour India | Copper Phthalocyanine Green G is a copper phthalocyanine dye. This product appears as a green powder and can be used in decorative, automotive and industrial paints, and printing inks. It has a moisture content of 1% and a pH of 6.5. | |
| Copper Phthalocynine Alpha Blue | Colour India | Copper Phthalocynine Alpha Blue is a copper phthalocyanine dye. This product appears as a blue powder and can be used in decorative, automotive and industrial paints, as well as in printing inks. It has a moisture content of 0.5% and a pH of 6.5. | |
| Copper Phthalocynine Beta Blue | Colour India | Copper Phthalocynine Beta Blue is a copper phthalocyanine dye. This product appears as a blue powder and can be used in decorative, automotive and industrial paints, as well as in printing inks. It has a moisture content of 0.5% and a pH of 6.5. | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Green Pigment Paste | Colour India | Green Pigment Paste is a non-flammable, water-insoluble solvent. This product appears as a thick, viscous liquid and can be used in water-based inks and textile printing applications. | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Orange Pigment Paste | Colour India | Orange Pigment Paste is a non-flammable, water-insoluble solvent. This product appears as a thick, viscous liquid and can be used in water-based inks and textile printing applications. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| Prussian Blue Pigment | Colour India | Prussian Blue Pigment is an ammonium ferrocyanide dye. This product appears as a reddish-blue powder and can be used in marine paints and printing inks. It has a bulk density of 0.4-0.45 and a pH value of 3.5. | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起 | |
| Red Pigment Paste | Colour India | Red Pigment Paste is a non-flammable, water-insoluble solvent. This product appears as a thick, viscous liquid and can be used in water-based inks and textile printing applications. | |
| Red-170 | Colour India | Red-170 is an organic dye. This product appears as a bluish-red powder and can be used in coatings, decorative and automotive paints, and printing inks. It has a moisture content of 1% and a pH of 6.8. | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起 | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起 | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起 | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起 | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起 | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起 | |
| UVB2000 Special Tertiary Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...展開 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 收起 | |
| UVB2200 Reactive Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...展開 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. 收起 | |
| UVE3216 Modified Epoxy Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...展開 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. 收起 | |
| UVU 6451 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications. | |
| UVU6219 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...展開 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. 收起 | |
| UVU6305 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...展開 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. 收起 | |
| UVU6609 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications. | |
| UVU6906 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications. | |
| UWS 1000 | AB Chimica srl | UWS 1000, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 68% of pigment type titanium dioxide. It is compatible with dispersion, emulsions, water-based resins in solution, and h...展開 UWS 1000, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 68% of pigment type titanium dioxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1003 | AB Chimica srl | UWS 1003, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 42% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with dispersion, emulsions, water-based resin...展開 UWS 1003, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 42% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1004 | AB Chimica srl | UWS 1004, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 15% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with dispersion, emulsions, water-based resin...展開 UWS 1004, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 15% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1005 | AB Chimica srl | UWS 1005, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 35% of pigment type transparent red iron oxide. It is compatible with dispersion, emulsions, water-based resins in solut...展開 UWS 1005, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 35% of pigment type transparent red iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1006 | AB Chimica srl | UWS 1006, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 60% of pigment type nickel antimony titanate yellow . It is compatible with dispersion, emulsions, water-based resins in...展開 UWS 1006, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 60% of pigment type nickel antimony titanate yellow . It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1007 | AB Chimica srl | UWS 1007, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 55% of pigment type yellow iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and ...展開 UWS 1007, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 55% of pigment type yellow iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1008 | AB Chimica srl | UWS 1008, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type azoic red P.R. 112. It is compatible with dispersion, emulsions, water-based resins in solution, and...展開 UWS 1008, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type azoic red P.R. 112. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1011 | AB Chimica srl | UWS 1011, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 55% of pigment type bright red iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, ...展開 UWS 1011, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 55% of pigment type bright red iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1012 | AB Chimica srl | UWS 1012, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 55% of pigment type red iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has...展開 UWS 1012, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 55% of pigment type red iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1020 | AB Chimica srl | UWS 1020, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type arylamide yellow. It is compatible with dispersion, emulsions, water-based resins in solution, and h...展開 UWS 1020, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type arylamide yellow. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1021 | AB Chimica srl | UWS 1021, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 50% of pigment type dinitroaniline orange. It is compatible with dispersion, emulsions, water-based resins in solution, ...展開 UWS 1021, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 50% of pigment type dinitroaniline orange. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1028 | AB Chimica srl | UWS 1028, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 60% of pigment type cobalt blue. It is compatible with dispersion, emulsions, water-based resins in solution, and has ap...展開 UWS 1028, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 60% of pigment type cobalt blue. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1036 | AB Chimica srl | UWS 1038, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 10% of pigment type green chlorinated copper phthalocyanine. It is compatible with dispersion, emulsions, water-based re...展開 UWS 1038, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 10% of pigment type green chlorinated copper phthalocyanine. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1037 | AB Chimica srl | UWS 1037, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 60% of pigment type green chrome oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and...展開 UWS 1037, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 60% of pigment type green chrome oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1038 | AB Chimica srl | UWS 1038, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 10% of pigment type green chlorinated copper phthalocyanine. It is compatible with dispersion, emulsions, water-based re...展開 UWS 1038, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 10% of pigment type green chlorinated copper phthalocyanine. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1039 | AB Chimica srl | UWS 1039, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type disazo yellow. It is compatible with dispersion, emulsions, water-based resins in solution, and has ...展開 UWS 1039, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type disazo yellow. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1041 | AB Chimica srl | UWS 1041, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 25% of pigment type dioxazine violet. It is compatible with dispersion, emulsions, water-based resins in solution, and h...展開 UWS 1041, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 25% of pigment type dioxazine violet. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1042 | AB Chimica srl | UWS 1042, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 5% of pigment type dioxazine violet. It is compatible with dispersion, emulsions, water-based resins in solution, and ha...展開 UWS 1042, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 5% of pigment type dioxazine violet. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 | |
| UWS 1044 | AB Chimica srl | UWS 1044, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 35% of pigment type transparent yellow iron oxide. It is compatible with dispersion, emulsions, water-based resins in so...展開 UWS 1044, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 35% of pigment type transparent yellow iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. 收起 |
