| Talc LP60 | LITHOS Industrial Minerals GmbH | Talc LP60 is a natural magnesium-silicate-hydrate which shows extremely lamellar structure (high aspect ratio), along with high brightness and purity. This product is recommended for use in coatings. | |
| Talc LPS10 | LITHOS Industrial Minerals GmbH | Talc LPS10 is a natural magnesium-silicate-hydrate which shows highly lamellar structure (high aspect ratio), along with good whiteness and purity. This product is recommended for use in paints and coatings. | |
| Talc LPS20 | LITHOS Industrial Minerals GmbH | Talc LPS20 is a natural magnesium-silicate-hydrate which shows highly lamellar structure (high aspect ratio), along with good whiteness and purity. This product is recommended for use in paints and coatings. | |
| Talc LPS30 | LITHOS Industrial Minerals GmbH | Talc LPS30 is a natural magnesium-silicate-hydrate which shows highly lamellar structure (high aspect ratio), along with good whiteness and purity. This product is recommended for use in paints and coatings. | |
| Talc LPS60 | LITHOS Industrial Minerals GmbH | Talc LPS60 is a natural magnesium-silicate-hydrate which shows highly lamellar structure (high aspect ratio), along with good whiteness and purity. This product is recommended for use in paints and coatings. | |
| TARGON® 19 | ICL Phosphate Specialty | TARGON® 19 is a setting retarder composed of Sodium monofluorphosphate Na2PO3F. It is used for cement based products especially to get a steady consistency of the mortar during the application and the first hours until the begin of setting. | Request Sample |
| TARGON® 32 | ICL Phosphate Specialty | TARGON® 32 is a white hygroscopic powder, that can be used as a retarder for cement products. | Request Sample |
| TARGON® 34 | ICL Phosphate Specialty | TARGON® 34 is a setting retarder for cement based products. It is a tetrapotassium pyrophosphate that appears as white hygroscopic granules. | Request Sample |
| TARGON® 35 | ICL Phosphate Specialty | TARGON® 35 is a setting retarder for cement based products. It is composed of a tetrapotassium pyrophosphate 60% clear solution. | Request Sample |
| TARGON® 43 | ICL Phosphate Specialty | TARGON® 43 is a setting retarder for premixed flooring screed and retarder component for gypsum plaster. It is a sodium polyphosphate (high molecular) that appears as a white very fine agglomerate. | Request Sample |
| Targon® 812 | ICL Phosphate Specialty | Targon® 812 is a setting retarder for gypsum plasters which are free of calciumhydroxide. It can also be used as retarder for cement-based products. Targon® 812 achieves constant setting, prolongs the working time, and improves the finishing treatment qua...展開 Targon® 812 is a setting retarder for gypsum plasters which are free of calciumhydroxide. It can also be used as retarder for cement-based products. Targon® 812 achieves constant setting, prolongs the working time, and improves the finishing treatment qualities. 收起 | Request Sample |
| TARGON® B 350 | ICL Phosphate Specialty | TARGON® B 350 is a retarder for gypsum formulations containing Ca(OH)2. It is recommended for formulations where a very rapid setting is needed, e.g. anhydrite floor screed. | Request Sample |
| TARGON® CP | ICL Phosphate Specialty | TARGON® CP is a fine white powder used as an additive for the manufacture of plasterboard. | Request Sample |
| TARGON® CP Granules | ICL Phosphate Specialty | TARGON® CP Granules is an additive for gypsum plaster and plaster boards. It is a cyclic sodium trimetaphosphate. | Request Sample |
| TARGON® G | ICL Phosphate Specialty | TARGON® G is a special product based on condensed phosphates with anticaking agent. It is a white, fine, hygroscopic powder with good flowability. This product is a secondary retarder component for premixed gypsum plaster. It achieves constant setting, pr...展開 TARGON® G is a special product based on condensed phosphates with anticaking agent. It is a white, fine, hygroscopic powder with good flowability. This product is a secondary retarder component for premixed gypsum plaster. It achieves constant setting, prolongs the treating time between cutting and felting and improves the finishing treating qualities. 收起 | Request Sample |
| TARGON® G 2 | ICL Phosphate Specialty | TARGON® G 2 os a special product based on condensed phosphates with anticaking agent possessing hydrophobic properties. It is a white, fine powder with good flowability. This product is a secondary retarder component for premixed gypsum plaster. It avoids...展開 TARGON® G 2 os a special product based on condensed phosphates with anticaking agent possessing hydrophobic properties. It is a white, fine powder with good flowability. This product is a secondary retarder component for premixed gypsum plaster. It avoids sudden blocking, achieves constant setting, prolongs the treating time between cutting and felting and improves the finishing treating qualities. 收起 | Request Sample |
| TARGON® G 5 | ICL Phosphate Specialty | TARGON® G 5 is a secondary retarder based on condensed phosphates. It is a white, fine, non-hygroscopic powder. It is a secondary retarder component for premixed gypsum plaster. This product has a dispersing effect on the solid content of the plaster. It ...展開 TARGON® G 5 is a secondary retarder based on condensed phosphates. It is a white, fine, non-hygroscopic powder. It is a secondary retarder component for premixed gypsum plaster. This product has a dispersing effect on the solid content of the plaster. It achieves constant setting and prolongs the treating time between cutting and felting. TARGON® G 5 also improves the finishing treating qualities. 收起 | Request Sample |
| TARGON® GA 1 | ICL Phosphate Specialty | TARGON® GA 1 is a setting retarded based on sodium phosphate, hydroxipolycarbonacid and anticaking agent. This white powder can be combined with TYLOSE® MC-types and other processing auxiliaries e.g. tensides. It is a setting retarder for gypsum plaster w...展開 TARGON® GA 1 is a setting retarded based on sodium phosphate, hydroxipolycarbonacid and anticaking agent. This white powder can be combined with TYLOSE® MC-types and other processing auxiliaries e.g. tensides. It is a setting retarder for gypsum plaster which is free or reduced of calciumhydroxide (manually and machine applied) and for plaster adhesives. 收起 | Request Sample |
| TARGON® TM | ICL Phosphate Specialty | TARGON® TM is a processing additive for premixed screeds and self-levelling floor compounds based on cement. It is also a setting retarder for cement based products. This product is a sodium triphosphate that consists of a white, very fine powder. It offe...展開 TARGON® TM is a processing additive for premixed screeds and self-levelling floor compounds based on cement. It is also a setting retarder for cement based products. This product is a sodium triphosphate that consists of a white, very fine powder. It offers good miscibility with cement based dry mortars due to its particle size, and there is no risk of demixing. TARGON® TM works as a setting retarder and a plasticizer, complexes multivalent cations e.g. Mg2+ and Ca2+, and can be combined with TYLOSE® MC-types and other processing auxiliaries e.g. tensides. 收起 | Request Sample |
| TEGO® ViscoPlus 3000 | Evonik Operations GmbH, BL Coating Additives | 用於水性漆的聯合增稠劑。 | Request Sample |
| TEGO® ViscoPlus 3010 | Evonik Operations GmbH, BL Coating Additives | 用於水性漆的聯合增稠劑。 | Request Sample |
| TEGO® ViscoPlus 3030 | Evonik Operations GmbH, BL Coating Additives | 用於水性漆的聯合增稠劑。 | Request Sample |
| TEGO® ViscoPlus 3060 | Evonik Operations GmbH, BL Coating Additives | 用於水性涂料的聯合增稠劑。 | Request Sample |
| Texipol® 63-201 | Scott Bader | Texipol® 63-201 is an inverse emulsion thickener that imparts a stringy and mildly pseudoplastic rheology to aqueous based compositions. | |
| Texipol® 63-202 | Scott Bader | Texipol® 63-202 is an inverse emulsion thickener that imparts a pseudoplastic rheology to aqueous based compositions. | |
| Texipol® 63-237 | Scott Bader | Texipol® 63-237 is a multifunctional inverse emulsion thickener developed specifically for the pigment printing of textiles. | |
| Texipol® 63-258 | Scott Bader | Texipol® 63-258 is an inverse emulsion thickener that imparts a highly pseudoplastic rheology to aqueous based compositions. | |
| Texipol® 63-259 | Scott Bader | Texipol® 63-259 is a California Prop 65 free, APEO free, inverse emulsion rheology modifier that imparts a highly pseudoplastic rheology to aqueous based compositions. Texipol® 63-259 is supplied as a pourable, low viscosity liquid that gives almost insta...展開 Texipol® 63-259 is a California Prop 65 free, APEO free, inverse emulsion rheology modifier that imparts a highly pseudoplastic rheology to aqueous based compositions. Texipol® 63-259 is supplied as a pourable, low viscosity liquid that gives almost instantaneous thickening when mixed directly into water-based formulations. 收起 | |
| Texipol® 63-510 | Scott Bader | Texipol® 63-510 is an inverse emulsion designed to thicken over a wide pH range, exceptional performance at low pH. | |
| Texipol® 63-513 | Scott Bader | Texipol® 63-513 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. Texipol® 63-513 imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralised dispersion as t...展開 Texipol® 63-513 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. Texipol® 63-513 imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralised dispersion as the sodium salt of an acrylic based polymer. Texipol® 63-513 shows broad pH compatibility. 收起 | |
| THIXATROL® 5020W | Elementis | THIXATROL® 5020W is a modified EVA emulsion for enhancing the rheological effectivity and metallic pigment orientation in coating film. It prevents the sedimentation of heavy pigments like metallic flakes and pearlescent pigments while paint preparation o...展開 THIXATROL® 5020W is a modified EVA emulsion for enhancing the rheological effectivity and metallic pigment orientation in coating film. It prevents the sedimentation of heavy pigments like metallic flakes and pearlescent pigments while paint preparation or operations stage and further storage. It is suitable for non-baking ambient drying and 2K-PU metallic paint for water borne systems. 收起 | Request Sample |
| THIXATROL® AS 8053 | Elementis | THIXATROL® AS 8053 is a 100% active, seed resistant, low activation temperature organic rheological additive. THIXATROL® AS 8053 provides high viscosity, thixotropy and thick layer sag control in high build systems that contain little solvent or are solve...展開 THIXATROL® AS 8053 is a 100% active, seed resistant, low activation temperature organic rheological additive. THIXATROL® AS 8053 provides high viscosity, thixotropy and thick layer sag control in high build systems that contain little solvent or are solvent-free. 收起 | Request Sample |
| THIXATROL® GST | Elementis | THIXATROL® GST rheological additive is an organically modified derivative of castor oil for use in aliphatic and aromatic solvent-borne coatings. | Request Sample |
| THIXATROL® Max | Elementis | THIXATROL® Max is a 100% active, solventborne, seed resistant organic rheological additive. THIXATROL® Max provides viscosity, thixotropy and sag control in both conventional and high build systems. | Request Sample |
| THIXATROL® P200A | Elementis | THIXATROL® P200A is a predispersed solventborne polyamide wax suitable for use under less than optimum dispersion conditions and as a post addable thixotropic rheological additive that is useful in a wide range of solvents. | Request Sample |
| THIXATROL® P200X | Elementis | THIXATROL® P200X is a predispersed solventborne polyamide wax designed to provide excellent thixotropy, anti- sag and anti-settling properties. It is suitable for use under less than optimum dispersion conditions and as a post addable thixotropic rheologi...展開 THIXATROL® P200X is a predispersed solventborne polyamide wax designed to provide excellent thixotropy, anti- sag and anti-settling properties. It is suitable for use under less than optimum dispersion conditions and as a post addable thixotropic rheological additive that is useful in a wide range of solvents. 收起 | Request Sample |
| THIXATROL® P230X | Elementis | THIXATROL® P230X is a special polyamide wax dispersion, which prevents settling of pigments and fillers and improves sag resistance of solvent-based coatings. | Request Sample |
| THIXATROL® PLUS | Elementis | THIXATROL® PLUS 為一100% 活性份，抗返粗的有機流變助劑，對傳統和厚漿型系統均能有效地提供黏度、搖變性及垂流控制。 | Request Sample |
| THIXATROL® PM 8054 | Elementis | THIXATROL® PM 8054 is a 100% active, seed resistant organic rheological additive. THIXATROL® PM 8054 provides high viscosity, thixotropy and thick layer sag control in high build systems that contain little solvent or are solvent-free. | Request Sample |
| THIXATROL® PM 8056 | Elementis | THIXATROL® PM 8056 is a 100% active, seed resistant, low activation temperature organic rheological additive. THIXATROL® PM 8056 provides high viscosity, thixotropy and thick layer sag control in high build systems that contain little solvent or are solve...展開 THIXATROL® PM 8056 is a 100% active, seed resistant, low activation temperature organic rheological additive. THIXATROL® PM 8056 provides high viscosity, thixotropy and thick layer sag control in high build systems that contain little solvent or are solvent-free. Developed for high performance protective coatings. 收起 | Request Sample |
| THIXATROL® PM 8058 | Elementis | THIXATROL® PM 8058 is a 100% active, seed resistant organic rheological additive. THIXATROL® PM 8058 provides high viscosity, thixotropy and thick layer sag control in high build systems that contain polar solvents. | Request Sample |
| THIXATROL® ST | Elementis | THIXATROL® ST is a modified derivative of castor oil for use in aliphatic and aromatic solvent-borne coatings. It also imparts flow and leveling control to powder coatings. | Request Sample |
| THIXCIN® R | Elementis | THIXCIN® R 為非吸濕性蓖麻油有機衍生物，能提供比 THIXCIN® E 更高的增稠效率。 | Request Sample |
| Thixol™ 50 S | Arkema Rheology & Specialty Additives | Thixol™ 50 S is a liquid acrylic self-associative thickener providing a thixotropic rheological profile to water-based systems, preventing them from settling and sagging without affecting leveling properties. | Request Sample |
| Thixol™ 53 L | Arkema Rheology & Specialty Additives | Thixol™ 53 L is a liquid acrylic self-associative thickener providing a strong pseudoplastic rheological profile to water-based systems. This product significantly prevents from settling and sagging without affecting levelling properties. Thixol™ 53 L is ...展開 Thixol™ 53 L is a liquid acrylic self-associative thickener providing a strong pseudoplastic rheological profile to water-based systems. This product significantly prevents from settling and sagging without affecting levelling properties. Thixol™ 53 L is solvent-, APEO- and tin-free. 收起 | Request Sample |
| TRM-003 Rheology Modifier | Dalian Trimer Chemical Co., Ltd. | TRM-003 Rheology Modifier is a hydrophobically modified ethylene oxide urethane (HEUR) created for waterborne architectural and functional coatings. This product is used in acrylic and styrene-acrylic latexes in interior and exterior paints. It has a visc...展開 TRM-003 Rheology Modifier is a hydrophobically modified ethylene oxide urethane (HEUR) created for waterborne architectural and functional coatings. This product is used in acrylic and styrene-acrylic latexes in interior and exterior paints. It has a viscosity between 1800 and 4000cp. 收起 | |
| TRM-004 Rheology Modifier | Dalian Trimer Chemical Co., Ltd. | TRM-004 Rheology Modifier is a hydrophobically modified ethylene oxide urethane (HEUR) created for waterborne architectural and functional coatings. This product is used in acrylic and styrene-acrylic latexes in interior and exterior paints. It has a visc...展開 TRM-004 Rheology Modifier is a hydrophobically modified ethylene oxide urethane (HEUR) created for waterborne architectural and functional coatings. This product is used in acrylic and styrene-acrylic latexes in interior and exterior paints. It has a viscosity between 2000 and 4000cp. 收起 | |
| TRM-103S Rheology Modifier | Dalian Trimer Chemical Co., Ltd. | TRM-103S Rheology Modifier is a hydrophobically modified ethylene oxide urethane (HEUR) created for waterborne architectural and functional coatings. This product is used in acrylic, styrene-acrylic and vinyl-acrylic latexes and can be used in interior an...展開 TRM-103S Rheology Modifier is a hydrophobically modified ethylene oxide urethane (HEUR) created for waterborne architectural and functional coatings. This product is used in acrylic, styrene-acrylic and vinyl-acrylic latexes and can be used in interior and exterior paints. It has a viscosity between 1000 and 3000cp. 收起 | |
| TRM-105 Rheology Modifier | Dalian Trimer Chemical Co., Ltd. | TRM-105 Rheology Modifier is a nonionic hydrophobically modified ethylene oxide urethane (HEUR) created for waterborne architectural and functional coatings. This product is used in acrylic, styrene-acrylic and vinyl-acrylic latexes and can be used in int...展開 TRM-105 Rheology Modifier is a nonionic hydrophobically modified ethylene oxide urethane (HEUR) created for waterborne architectural and functional coatings. This product is used in acrylic, styrene-acrylic and vinyl-acrylic latexes and can be used in interior and exterior paints and also as a co-thickener. It has a viscosity between 3000 and 5000cp. 收起 | |
| TRM-112 Rheology Modifier | Dalian Trimer Chemical Co., Ltd. | TRM-112 is a high solids Rheology Modifier used with several latexes in interior and exterior paints. It has a viscosity between 3000 and 5000cp. | |
| TRM-160 Rheology Modifier | Dalian Trimer Chemical Co., Ltd. | TRM-160 Rheology Modifier is a synthetic hydrophobically modified alkali-swellable anionic associative emulsion thickener (HASE) created for waterborne architectural and functional coatings. This product is used for interior high PVC flat through sheen pa...展開 TRM-160 Rheology Modifier is a synthetic hydrophobically modified alkali-swellable anionic associative emulsion thickener (HASE) created for waterborne architectural and functional coatings. This product is used for interior high PVC flat through sheen paint formulations. 收起 | |
| TRM-203 Rheology Modifier | Dalian Trimer Chemical Co., Ltd. | TRM-203 Rheology Modifier is a synthetic hydrophobically modified alkali-swellable anionic associative emulsion thickener (HASE) created for waterborne architectural, functional and paper coatings. This product is used for interior flat through sheen, sat...展開 TRM-203 Rheology Modifier is a synthetic hydrophobically modified alkali-swellable anionic associative emulsion thickener (HASE) created for waterborne architectural, functional and paper coatings. This product is used for interior flat through sheen, satin paints. 收起 | |
| TRM-206 Rheology Modifier | Dalian Trimer Chemical Co., Ltd. | TRM-206 Rheology Modifier is a synthetic hydrophobically modified alkali-swellable anionic emulsion thickener (HASE) created for waterborne architectural and functional coatings. This product is used for interior flat through sheen, satin paints. | |
| TRM-233 Rheology Modifier | Dalian Trimer Chemical Co., Ltd. | TRM-233 Rheology Modifier is a synthetic hydrophobically modified alkali-swellable anionic associative emulsion thickener (HASE) created for waterborne architectural, functional and paper coatings. This product is used for interior flat through sheen, sta...展開 TRM-233 Rheology Modifier is a synthetic hydrophobically modified alkali-swellable anionic associative emulsion thickener (HASE) created for waterborne architectural, functional and paper coatings. This product is used for interior flat through sheen, stain paints in addition to being an alternative to cellulosic thickeners. 收起 | |
| TRM-272 Rheology Modifier | Dalian Trimer Chemical Co., Ltd. | TRM-272 Rheology Modifier is a synthetic hydrophobically modified Alkali-Swellable anionic associative Emulsion thickener (HASE) designed for waterborne architectural and functional coatings. This product is used for interior flat through sheen, satin pai...展開 TRM-272 Rheology Modifier is a synthetic hydrophobically modified Alkali-Swellable anionic associative Emulsion thickener (HASE) designed for waterborne architectural and functional coatings. This product is used for interior flat through sheen, satin paints. 收起 | |
| TRM-300 Rheology Modifier | Dalian Trimer Chemical Co., Ltd. | TRM-300 Rheology Modifier is a synthetic Hydrophobically modified Alkai-Swellable anionic associative Emulsion thickener (HASE) for waterborne architectural, functional and paper coatings. This is used for interior flat through sheen, satin paints. | |
| TRM-360 Rheology Modifier | Dalian Trimer Chemical Co., Ltd. | TRM-360 Rheology Modifier is a synthetic Hydrophobically modified Alkali-Swellable anionic associative Emulsion thickener (HASE) created for waterborne architectural and functional coatings. This product is used for interior PVC flat through sheen paint f...展開 TRM-360 Rheology Modifier is a synthetic Hydrophobically modified Alkali-Swellable anionic associative Emulsion thickener (HASE) created for waterborne architectural and functional coatings. This product is used for interior PVC flat through sheen paint formulations. 收起 | |
| TRM-PLP Rheology Modifier | Dalian Trimer Chemical Co., Ltd. | TRM-PLP Rheology Modifier is a nonionic, solvent free, hydrophobically modified ethylene oxide urethane (HEUR) intended for waterborne architectural and functional coatings. This product can also be applied to interior and exterior high end paints | |
| TROYTHIX™ 150ACS | Arxada – Troy Corporation | TROYTHIX™ 150ACS is a pre-activated polyamide wax dispersion that effectively provides a highly thixotropic or shear thinning structure, resulting in excellent sag resistance and pigment suspension. The thixotropic nature of 150ACS results in excellent ap...展開 TROYTHIX™ 150ACS is a pre-activated polyamide wax dispersion that effectively provides a highly thixotropic or shear thinning structure, resulting in excellent sag resistance and pigment suspension. The thixotropic nature of 150ACS results in excellent application properties 收起 | Request Sample |
| Troythix™ 152H | Arxada – Troy Corporation | Troythix™ 152H is a pre-activated polyamide wax dispersion that effectively provides a highly thixotropic or shear thining structure, excellent sag resistance and pigment suspension. Troythix™ 152H is effective in non-aqueous wood and furniture finishes, ...展開 Troythix™ 152H is a pre-activated polyamide wax dispersion that effectively provides a highly thixotropic or shear thining structure, excellent sag resistance and pigment suspension. Troythix™ 152H is effective in non-aqueous wood and furniture finishes, metallic and special effect pigmented coatings, high gloss industrial coatings, industrial maintenance coatings and automotive coatings. 收起 | Request Sample |
| Troythix™ 154B | Arxada – Troy Corporation | Troythix™ 154B is a polyamide rheological additive for non-aqueous systems. It is a pre-activated polyamide wax dispersion that provides high thixotropy, excellent sag resistance and pigment suspension in non-aqueous systems. This product is effective in ...展開 Troythix™ 154B is a polyamide rheological additive for non-aqueous systems. It is a pre-activated polyamide wax dispersion that provides high thixotropy, excellent sag resistance and pigment suspension in non-aqueous systems. This product is effective in non-awueous wood and furniture finishes, metallic and special effect pigmented products, and high gloss industrial, industrial maintenance, transportation, and automotive coatings. Troythix™ 154B is HAPS and aromatic free. 收起 | Request Sample |
| TROYTHIX™ 21BA | Arxada – Troy Corporation | TROYTHIX™ 21BA is a chemically-treated polymerized oil. It works on the particle/vehicle interface where a structure based on electrical charge is set up between particles, resulting in controlled flocculation. | Request Sample |
| TROYTHIX™ 42BA | Arxada – Troy Corporation | TROYTHIX™ 42BA is a liquid designed to increase the viscosity of non-aqueous resin systems by means of a hydrogen bonding mechanism which couples together molecules of the vehicle. Other rheological properties are normally not affected. | Request Sample |
| TROYTHIX™ A | Arxada – Troy Corporation | TROYTHIX™ A is a bodying agent for nonaqueous coatings and is supplied as a white powder. It is a polymerized chemically inert organic ester that is activated by heat and shear to impart the following rheological properties, high thixotropy, sag resistanc...展開 TROYTHIX™ A is a bodying agent for nonaqueous coatings and is supplied as a white powder. It is a polymerized chemically inert organic ester that is activated by heat and shear to impart the following rheological properties, high thixotropy, sag resistance, pigment suspension, improved brushability, reduced penetration, viscosity increase, and educed pigment flooding and floating. 收起 | Request Sample |
| TROYTHIX™ XYZ | Arxada – Troy Corporation | TROYTHIX™ XYZ is a thixotropic agent supplied as a white, color-stable fine powder. It functions by setting up a gel structure with the vehicle. | Request Sample |
| Tytan CX100 (Titanate Rheology Modifier) | Borica Co., Ltd. | Tytan CX100 is developed as a rheology modifier for emulsion paints. It reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. | |
| Tytan CX200 (Titanate Rheology Modifier) | Borica Co., Ltd. | Tytan CX200 is developed as a rheology modifier for emulsion paints. It reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. | |
| Tytan CX400 (Titanate Rheology Modifier) | Borica Co., Ltd. | Tytan CX400 is developed as a rheology modifier for emulsion paints. It reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. | |
| ULTRAPEG® 1000 | Indorama Ventures | ULTRAPEG® 1000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It is a solid, with an average molecular weight of 950-1050, a hydroxyl value of 107-118mg KOH/g, and a wa...展開 ULTRAPEG® 1000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It is a solid, with an average molecular weight of 950-1050, a hydroxyl value of 107-118mg KOH/g, and a water content of 0.5% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for leathers, textiles, and paints. ULTRAPEG® 1000 may also be formulated in creams, lotions, and moisturizers, cream without rinsing for hair, deodorants, products for skin treatment and soaps 收起 | |
| ULTRAPEG® 1500 F | Indorama Ventures | ULTRAPEG® 1500 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 1350-1595, a hydroxyl value...展開 ULTRAPEG® 1500 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 1350-1595, a hydroxyl value of 70-83mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for leathers, detergents, lubricants, textiles, and paints. ULTRAPEG® 1500 F may also be formulated in creams, lotions, and moisturizers, cream without rinsing for hair, deodorants, products for skin treatment and soaps, products for makeup (lipsticks, shadows, foundations) and toothpastes. 收起 | |
| ULTRAPEG® 200 | Indorama Ventures | ULTRAPEG® 200 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 190-210, a hydroxyl value of 5...展開 ULTRAPEG® 200 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 190-210, a hydroxyl value of 535-590mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for leathers, detergents, lubricants, and paints. ULTRAPEG® 200 may also be used in bath oils, creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations), shampoos, hair spray and fragrances. 收起 | |
| ULTRAPEG® 300 | Indorama Ventures | ULTRAPEG® 300 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 285-315, a hydroxyl value of 3...展開 ULTRAPEG® 300 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 285-315, a hydroxyl value of 356-394mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for agrochemical, ceramic, leathers, lubricants, paints, textiles, and paints. ULTRAPEG® 300 may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) leave in conditioners, shampoos, deodorant and hair spray. 收起 | |
| ULTRAPEG® 400 | Indorama Ventures | ULTRAPEG® 400 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 380-420, a hydroxyl value of 2...展開 ULTRAPEG® 400 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 380-420, a hydroxyl value of 267-295mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for agrochemical, rubber, ceramic, leathers, lubricants, textiles, and paints. ULTRAPEG® 400 may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations), shampoos, soaps and hair spray. 收起 | |
| ULTRAPEG® 4000 F | Indorama Ventures | ULTRAPEG® 4000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 3600-4400, a hydroxyl value ...展開 ULTRAPEG® 4000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 3600-4400, a hydroxyl value of 25-315mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for adhesives, agrochemical, rubber, ceramic, leathers, detergents and paints. ULTRAPEG® 4000 F may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) leave in conditioners, deodorant, products for skin treatment and soap. 收起 | |
| ULTRAPEG® 600 | Indorama Ventures | ULTRAPEG® 600 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 570-630, a hydroxyl value of 17...展開 ULTRAPEG® 600 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 570-630, a hydroxyl value of 178-197mg KOH/g, and a water content of 0.25% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for adhesives, agrochemical, leathers, detergents, lubricants, personal care, textiles, and paints. ULTRAPEG® 600 may also be used in creams, lotions and moisturizers, products for skin treatment, hair spray and soap. 收起 | |
| ULTRAPEG® 6000 F | Indorama Ventures | ULTRAPEG® 6000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 5400-6600, a hydroxyl value ...展開 ULTRAPEG® 6000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 5400-6600, a hydroxyl value of 17-20mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for adhesives, agrochemical, rubber, ceramic, detergents and lubricants. ULTRAPEG® 6000 F may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) and soap. 收起 | |
| ULTRAPEG® 8000 | Indorama Ventures | ULTRAPEG® 8000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 7000-9000, a hydroxyl value of...展開 ULTRAPEG® 8000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 7000-9000, a hydroxyl value of 12.5-16.0mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points, and hardness consistency. This product is ideally used for adhesives, agrochemicals, rubber, ceramic, and detergents. ULTRAPEG® 8000 may also be used products for makeup (lipsticks, shadows, foundations). 收起 | |
| Valida L, 3% | Sappi Biotech | Valida L, 3% is a highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida can help solve many challenges faced by ...展開 Valida L, 3% is a highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida can help solve many challenges faced by paint, coating and inks industries: in-can stability, sagging & leveling balance, cracking during drying, open time. The highly shear thinning profile makes Valida suitable for different processes, including spraying. 收起 | Request Sample |
| Valida S171C | Sappi Biotech | Valida S171C is a highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida can help solve many challenges faced by ...展開 Valida S171C is a highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida can help solve many challenges faced by paint, coating and inks industries: in-can stability, sagging & leveling balance, cracking during drying, open time. The highly shear thinning profile makes Valida suitable for different processes, including spraying. 收起 | Request Sample |
| Valida S191C | Sappi Biotech | Valida S191C is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida is stable in a wide pH range (1-13) and to...展開 Valida S191C is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida is stable in a wide pH range (1-13) and towards high electrolytes concentration. In HI&I application, it functions as a rheology modifier and thixotropic agent, modifying the viscosity and effectively providing properties such as flow control. The highly shear thinning profile makes Valida suitable for different processes, including spraying. 收起 | Request Sample |
| Valida S231C | Sappi Biotech | Valida S231C is a highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida can help solve many challenges faced by ...展開 Valida S231C is a highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida can help solve many challenges faced by paint, coating and inks industries: in-can stability, sagging & leveling balance, cracking during drying, open time. The highly shear thinning profile makes Valida suitable for different processes, including spraying. 收起 | Request Sample |
| VAN GEL® B | Vanderbilt Minerals, LLC | 用於乳膠漆，發展平滑的觸變型稠度控制。源自天然膠狀硅酸鋁鎂。提供無滴落的涂裝。取消或最大限度降低油漆使用前的攪拌。 | Request Sample |
| VANZAN® | Vanderbilt Minerals, LLC | VANZAN和VANZAN D是黃原膠流變劑，在水性涂料中可產生獨特的假塑性特性。可出色地應用於需要高流挂控制的體系。該產品在有鹽存在和極端pH值和極端溫度范圍內均非常穩定。VANZAN是常規牌號。VANZAN D是易分散牌號，當體系pH值提高時可激活 | Request Sample |
| VANZAN® D | Vanderbilt Minerals, LLC | VANZAN和VANZAN D是黃原膠流變劑，在水性涂料中可產生獨特的假塑性特性。可出色地應用於需要高流挂控制的體系。該產品在有鹽存在和極端pH值和極端溫度范圍內均非常穩定。VANZAN是常規牌號。VANZAN D是易分散牌號，當體系pH值提高時可激活 | Request Sample |
| VEEGUM® T | Vanderbilt Minerals, LLC | VEEGUM T 硅酸鎂鋁是一種水洗天然蒙脫石粘土，VEEGUM T水性乳液在低固含時為高粘性觸變膠體。VEEGUM T賦予乳膠漆的觸變性可提供理想的性能，例如不分離、“不滴水”應用、流平而不流挂 | Request Sample |
| VINAVIL® PA2000 | VINAVIL Americas Corp. | VINAVIL® PA2000 is a hydrophobically modified alkali swellable emulsion (HASE) that can be used as a rheology modifier in water-based paints, textile coatings, and construction products. This product works best when neutralized with potassium, ammonium, ...展開 VINAVIL® PA2000 is a hydrophobically modified alkali swellable emulsion (HASE) that can be used as a rheology modifier in water-based paints, textile coatings, and construction products. This product works best when neutralized with potassium, ammonium, or sodium hydroxides at a pH between 7.0 and 10.0. 收起 | |
| Viscoatex™ 100 S | Arkema Rheology & Specialty Additives | Viscoatex™ 100 S is a powerful acrylic thickener. The high-viscosity formulations made with Viscoatex™ 100 S exhibit a smooth and easy flow. Primarily designed for water-based systems, it can also be used to thicken solvent-based formulations such as alco...展開 Viscoatex™ 100 S is a powerful acrylic thickener. The high-viscosity formulations made with Viscoatex™ 100 S exhibit a smooth and easy flow. Primarily designed for water-based systems, it can also be used to thicken solvent-based formulations such as alcohol gels or petroleum-based solvents as long as it is used in combination with a polar solvent. 收起 | Request Sample |
| Viscoatex™ 330 | Arkema Rheology & Specialty Additives | Viscoatex™ 330 is a synthetic alkali swellable liquid, solvent free thickener for water-borne systems, effective to increase low shear viscosities as well as yield values. Its use in textured coatings stops sagging and gives a good body to the coating wit...展開 Viscoatex™ 330 is a synthetic alkali swellable liquid, solvent free thickener for water-borne systems, effective to increase low shear viscosities as well as yield values. Its use in textured coatings stops sagging and gives a good body to the coating without decreasing brushability. In adhesives, particularly on vertical surfaces, it provides excellent resistance to movement immediately after application. 收起 | Request Sample |
| VISCOATEX™ 46 | Arkema Rheology & Specialty Additives | When used in water-based systems allows an increase in the yield value (i.e. low shear viscosity). Its use in textured coatings stops sagging and gives a good body to the coating without decreasing brushability. In paints and adhesives, avoids the formati...展開 When used in water-based systems allows an increase in the yield value (i.e. low shear viscosity). Its use in textured coatings stops sagging and gives a good body to the coating without decreasing brushability. In paints and adhesives, avoids the formation of syneresis and sagging. In pigments and extender dispersions (pigment pastes or slurries), avoids settling. 收起 | Request Sample |
| Viscoatex™ 560 | Arkema Rheology & Specialty Additives | Viscoatex™ 560 is a formaldehyde-free, APEO-free, Heavy metal-free and Solvent-free non associative thickener designed for use in adhesives, paints, sealants & mastics. Viscoatex™ 560 imparts robustness versus variations of ingredients such as latex type,...展開 Viscoatex™ 560 is a formaldehyde-free, APEO-free, Heavy metal-free and Solvent-free non associative thickener designed for use in adhesives, paints, sealants & mastics. Viscoatex™ 560 imparts robustness versus variations of ingredients such as latex type, surfactant and co-solvent. 收起 | Request Sample |
| Viscoatex™ 730 | Arkema Rheology & Specialty Additives | Viscoatex™ 730 is a synthetic alkali swellable, solvent free and liquid thickener for water-borne systems, highly effective to increase low shear viscosities as well as yield values. Levels of use can thus be significantly reduced in replacing usual low s...展開 Viscoatex™ 730 is a synthetic alkali swellable, solvent free and liquid thickener for water-borne systems, highly effective to increase low shear viscosities as well as yield values. Levels of use can thus be significantly reduced in replacing usual low shear effective thickeners by Viscoatex™ 730. It is recommended for use in flat paints, textured coatings, plasters and woodstains. It is easy to handle and can be incorporated at any manufacture step. 收起 | Request Sample |
| VOLCLAY® 325 Mesh | American Colloid Company | VOLCLAY® 325 Mesh is a selectively-mined and processed sodium bentonite that is a true micronized product that produces consistency and performance. This product is often used as a multi-purpose suspending, emulsifying, and binding agent in industrial app...展開 VOLCLAY® 325 Mesh is a selectively-mined and processed sodium bentonite that is a true micronized product that produces consistency and performance. This product is often used as a multi-purpose suspending, emulsifying, and binding agent in industrial applications where low grit and a small, dry particle size are required. It can be applied in ceramics, porcelain and glaze applications. 收起 | |
| VOLCLAY® GPG 30 | American Colloid Company | VOLCLAY® GPG 30 is a granular sodium bentonite with an average particle size ranging between 20 and 70 mesh. This product is a multi-purpose product noted for rapid dispersion in water. It is employed in a wide variety of industrial applications. | |
| VOLCLAY® HPM-20 | American Colloid Company | VOLCLAY® HPM-20 is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, ...展開 VOLCLAY® HPM-20 is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, and emulsion stabilizer in adhesives and industrial applications. 收起 | |
| VOLCLAY® HPM-75 | American Colloid Company | VOLCLAY® HPM-75 is a high-purity sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, and emulsion sta...展開 VOLCLAY® HPM-75 is a high-purity sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, and emulsion stabilizer for adhesives, coatings, and other industrial applications. 收起 | |
| VOLCLAY® Rheospan | American Colloid Company | VOLCLAY® Rheospan is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This product is typically used as a suspending agent, viscosifier, binder, and emulsion stabi...展開 VOLCLAY® Rheospan is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This product is typically used as a suspending agent, viscosifier, binder, and emulsion stabilizer in a variety of industrial applications. 收起 | |
| VOLCLAY® SPV 200 | American Colloid Company | VOLCLAY® SPV 200 is a selectively-mined and processed, high-quality sodium bentonite. This product is a multi-purpose suspending, emulsifying, and binding agent used in industrial products where a dry 200 mesh particle size is required. | |
| Zirconia Fume PSF 87Z | Panadyne | Zirconia Fume PSF 87Z is a zirconia fume, which is a byproduct when one manufactures fused zirconia. This product has improved durability, strength, and flowability characteristics. Zirconia fume also has abrasion, chemical, and corrosion-resistant tenden...展開 Zirconia Fume PSF 87Z is a zirconia fume, which is a byproduct when one manufactures fused zirconia. This product has improved durability, strength, and flowability characteristics. Zirconia fume also has abrasion, chemical, and corrosion-resistant tendencies. It can be used in coatings, adhesives, concrete applications, sealants, and as a thickener. 收起 |
