| Resiflow® CP-77 | Estron Chemical, Inc. | Resiflow® CP-77 is a reprocessing aid useful for minimizing or eliminating powder coating surface imperfections such as craters or color specs caused by cross-contamination during manufacturing. Typically, 0.25 – 0.5% of Resiflow® CP-77 is added to the co...展開 Resiflow® CP-77 is a reprocessing aid useful for minimizing or eliminating powder coating surface imperfections such as craters or color specs caused by cross-contamination during manufacturing. Typically, 0.25 – 0.5% of Resiflow® CP-77 is added to the contaminated flakes or powder, premixed, reextruded, and then further processed in the conventional manner. Bits or protrusions are unlikely to be remediated by reprocessing, and Resiflow® CP-77 may obviate that type of surface defect. 收起 | |
| Resiflow® LV MBP-10 | Estron Chemical, Inc. | Resiflow® LV MBP-10 is a 10% flow control masterbatch of Resiflow® LV in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. This product is in flake form and has been designed for optimal flow and leveling in PETGIC, PE-PT910 and PE-Primid powder ...展開 Resiflow® LV MBP-10 is a 10% flow control masterbatch of Resiflow® LV in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. This product is in flake form and has been designed for optimal flow and leveling in PETGIC, PE-PT910 and PE-Primid powder coating formulations. 收起 | |
| Resiflow® P-37 | Estron Chemical, Inc. | Resiflow® P-37 performs not only as a flow control agent but may also enhance the surface hardness and stain resistance in applications such as appliance and architectural powder coatings. The active ingredient is released and homogenized with the other c...展開 Resiflow® P-37 performs not only as a flow control agent but may also enhance the surface hardness and stain resistance in applications such as appliance and architectural powder coatings. The active ingredient is released and homogenized with the other components during extrusion, and this results in a uniform system. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® P-37 into powder coating formulations. 收起 | |
| Resiflow® PF-67 | Estron Chemical, Inc. | Resiflow® PF-67 is a flow control agent used primarily in general industrial powder coating applications. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® P...展開 Resiflow® PF-67 is a flow control agent used primarily in general industrial powder coating applications. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® PF-67 into powder coating formulations. This product is best suited for hybrid technology, but can be used in other binder systems such polyesters, polyurethanes, hybrids, epoxies, and acrylics. 收起 | |
| Resiflow® PH-241 | Estron Chemical, Inc. | Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries includi...展開 Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries including polyesters, hybrids and epoxy based formulations. During the cure cycle, Resiflow® PH-241 can react with the binder system of the powder coating and also crosslink with itself. 收起 | |
| Resiflow® PL-200 | Estron Chemical, Inc. | Resiflow® PL-200 is noted for its superior flow and leveling characteristics, excellent re-coatability and intercoat adhesion properties, all of which are essential attributes for powder coating primers. Resiflow® PL-200 is widely used and known for its s...展開 Resiflow® PL-200 is noted for its superior flow and leveling characteristics, excellent re-coatability and intercoat adhesion properties, all of which are essential attributes for powder coating primers. Resiflow® PL-200 is widely used and known for its suitability and reliable performance across the spectrum of binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. 收起 | |
| Resiflow® PL-200A | Estron Chemical, Inc. | Resiflow® PL-200A is a classical type of powder flow control agent. This product is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and E...展開 Resiflow® PL-200A is a classical type of powder flow control agent. This product is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and Epoxies. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® PL-200A into pigmented powder coating formulations. 收起 | |
| Resiflow® PL-210 | Estron Chemical, Inc. | Resiflow® PL-210 is noted for its performance in extremely demanding powder coating applications that require improved gloss, and wet look and smoothness, compared to other classical type flow control additives. Resiflow® PL-210 has reliable performance a...展開 Resiflow® PL-210 is noted for its performance in extremely demanding powder coating applications that require improved gloss, and wet look and smoothness, compared to other classical type flow control additives. Resiflow® PL-210 has reliable performance across the spectrum of binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. 收起 | |
| Resiflow® PL-220 | Estron Chemical, Inc. | Resiflow® PL-220 is a flow control agent for powder coatings that imparts unique compatibilizing and anti-cratering robustness properties to powder coating formulations while affording exceptionally smooth films. Resiflow® PL-220 is suitable for multiple ...展開 Resiflow® PL-220 is a flow control agent for powder coatings that imparts unique compatibilizing and anti-cratering robustness properties to powder coating formulations while affording exceptionally smooth films. Resiflow® PL-220 is suitable for multiple binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. 收起 |
