| 3M™ Ceramic Microspheres W-210 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-210 are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these 3M c...view more 3M™ Ceramic Microspheres White Grade W-210 are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-210 are typically chosen over other 3M ceramic microspheres for higher gloss formulations. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. view less | |
| 3M™ Ceramic Microspheres W-410 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-410 are made of high-strength alkali alumino silicate ceramic with a typical d90 of 21 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler load...view more 3M™ Ceramic Microspheres White Grade W-410 are made of high-strength alkali alumino silicate ceramic with a typical d90 of 21 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-410 are typically chosen over other 3M ceramic microspheres for their overall balance in properties. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. view less | |
| 3M™ Ceramic Microspheres W-610 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic m...view more 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-610 are typically chosen over other 3M ceramic microspheres for increased durability. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. view less | |
| 3M™ Fluorosurfactant FC-4430 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4430 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...view more 3M™ Fluorosurfactant FC-4430 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4430 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product can provide stain and dirt pick up resistance. view less | |
| 3M™ Fluorosurfactant FC-4432 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4432 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...view more 3M™ Fluorosurfactant FC-4432 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4432 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product is ideal for providing stain and dirt pick up resistance. view less | |
| 3M™ Fluorosurfactant FC-4434 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4434 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...view more 3M™ Fluorosurfactant FC-4434 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4434 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product is ideal for providing stain and dirt pick up resistance. view less | |
| 3M™ Glass Bubbles iM16K | 3M Advanced Materials Division | 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...view more 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles iM30K | 3M Advanced Materials Division | 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...view more 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K1 | 3M Advanced Materials Division | 3M™ Glass Bubbles K1 are hollow glass spheres with a typical density of 0.125 g/cc and an isostatic crush strength of 250 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths...view more 3M™ Glass Bubbles K1 are hollow glass spheres with a typical density of 0.125 g/cc and an isostatic crush strength of 250 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K15 | 3M Advanced Materials Division | 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K20 | 3M Advanced Materials Division | 3M™ Glass Bubbles K20 are hollow glass spheres with a typical density of 0.20 g/cc and an isostatic crush strength of 500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles K20 are hollow glass spheres with a typical density of 0.20 g/cc and an isostatic crush strength of 500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K25 | 3M Advanced Materials Division | 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K37 | 3M Advanced Materials Division | 3M™ Glass Bubbles K37 are hollow glass spheres with a typical density of 0.37 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strength...view more 3M™ Glass Bubbles K37 are hollow glass spheres with a typical density of 0.37 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K42HS | 3M Advanced Materials Division | 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...view more 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K46 | 3M Advanced Materials Division | 3M™ Glass Bubbles SK46 are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles SK46 are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S15 | 3M Advanced Materials Division | 3M™ Glass Bubbles S15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles S15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S22 | 3M Advanced Materials Division | 3M™ Glass Bubbles S22 are hollow glass spheres with a typical density of 0.22 g/cc and an isostatic crush strength of 400 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths...view more 3M™ Glass Bubbles S22 are hollow glass spheres with a typical density of 0.22 g/cc and an isostatic crush strength of 400 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S28HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...view more 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S32 | 3M Advanced Materials Division | 3M™ Glass Bubbles S32 are hollow glass spheres with a typical density of 0.32 g/cc and an isostatic crush strength of 2,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles S32 are hollow glass spheres with a typical density of 0.32 g/cc and an isostatic crush strength of 2,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S35 | 3M Advanced Materials Division | 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S38 | 3M Advanced Materials Division | 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S38HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush streng...view more 3M™ Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S42XHS | 3M Advanced Materials Division | 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...view more 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S60 | 3M Advanced Materials Division | 3M™ Glass Bubbles S60 are hollow glass spheres with a typical density of 0.6 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strength...view more 3M™ Glass Bubbles S60 are hollow glass spheres with a typical density of 0.6 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S60HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S60HS are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 18,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...view more 3M™ Glass Bubbles S60HS are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 18,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles XLD3000 | 3M Advanced Materials Division | 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush str...view more 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-250 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-250 is an aqueous-based fluorinated acrylic polymer dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product pe...view more 3M™ Stain Resistant Additive and Sealer SRA-250 is an aqueous-based fluorinated acrylic polymer dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-250 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-250 is easy to incorporate into existing water-based products and can be added to existing formulations or diluted with water and used as a stand-alone sealer. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-270 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-270 is an aqueous-based fluorinated acrylic modified urethane dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The ...view more 3M™ Stain Resistant Additive and Sealer SRA-270 is an aqueous-based fluorinated acrylic modified urethane dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-270 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-270 is easy to incorporate into existing water-based products and can be added to existing formulations or diluted with water and used as a stand-alone sealer. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-450 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-450 is a solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the...view more 3M™ Stain Resistant Additive and Sealer SRA-450 is a solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-450 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-450 is easy to incorporate into existing solvent-based products and can be added to existing formulations or diluted with solvent and used as a stand-alone sealer. It can also be used as an additive for solvent-based or 100% silicone-based sealers to boost oil repellency. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-451 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-451 is an solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates th...view more 3M™ Stain Resistant Additive and Sealer SRA-451 is an solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-451 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-451 is easy to incorporate into existing solvent-based products and can be added to existing formulations or diluted with solvent and used as a stand-alone sealer. It can also be used as an additive for solvent-based or 100% silicone-based sealers to boost oil repellency. view less | |
| 3M™ Stain Resistant Additive SRC-220 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRC-220 is an aqueous-based fluorinated polyurethane dispersion (PUD) which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product...view more 3M™ Stain Resistant Additive and Sealer SRC-220 is an aqueous-based fluorinated polyurethane dispersion (PUD) which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRC-220 offers durability, long-lasting performance and UV resistance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRC-220 is easy to incorporate into existing water and some solvent-based products and can be added to existing formulations or diluted with water or water miscible solvents and used as a stand-alone sealer. view less | |
| Easy Clean Coatings 1000 | 3M Advanced Materials Division | 3M™ Easy Clean Coating ECC-1000 is a fluoropolymer solution used for coating ceramic, glass and other non-porous surfaces. Once applied, the result is an “easy-to-clean” surface that resists staining, hard water deposits and soils, helping extend the time...view more 3M™ Easy Clean Coating ECC-1000 is a fluoropolymer solution used for coating ceramic, glass and other non-porous surfaces. Once applied, the result is an “easy-to-clean” surface that resists staining, hard water deposits and soils, helping extend the time between cleanings. view less | |
| Easy Clean Coatings 4000 | 3M Advanced Materials Division | 3M™ Easy Clean Coating ECC-4000 is a fluoropolymer used for coating ceramic and glass surfaces. Once it air-dries, it provides an “easy-to-clean” surface that resists staining, hard water deposits and soils, helping extend the time between cleanings. | |
| Easy Clean Coatings 6000 | 3M Advanced Materials Division | 3M™ Easy Clean Coating ECC-6000 is a fluoropolymer solution used for coating non-porous ceramic, glass or metal oxide surfaces. Once it bonds with a substrate, it provides an “easy-to-clean” surface that resists staining, hard water deposits and soils, he...view more 3M™ Easy Clean Coating ECC-6000 is a fluoropolymer solution used for coating non-porous ceramic, glass or metal oxide surfaces. Once it bonds with a substrate, it provides an “easy-to-clean” surface that resists staining, hard water deposits and soils, helping extend the time between cleanings. view less | |
| MULTIRES CS 100 | Rain Carbon Germany GmbH | MULTIRES CS 100 is a hydrocarbon resin; polymerisation product from unsaturated aromatic C9/C10 hydrocarbons. | |
| Novares® C 10 | Rain Carbon Germany GmbH | Novares® C 10 is a Indene-Coumarone Resin based on aromatic feedstock. It is ideal for use in anticorrosive paint and varnish to increase hydrophobicity and chemical resistance to improve hydrophobicity and chemical resistance. Detailed information is ava...view more Novares® C 10 is a Indene-Coumarone Resin based on aromatic feedstock. It is ideal for use in anticorrosive paint and varnish to increase hydrophobicity and chemical resistance to improve hydrophobicity and chemical resistance. Detailed information is available upon request. view less | |
| Novares® C 100 | Rain Carbon Germany GmbH | Novares® C 100 is a Indene-Coumarone Resin (SP 100°C) based on aromatic feedstock. It is ideal for use in anticorrosive paint and varnish to increase hydrophobicity and chemical resistance to improve hydrophobicity and chemical resistance. Detailed infor...view more Novares® C 100 is a Indene-Coumarone Resin (SP 100°C) based on aromatic feedstock. It is ideal for use in anticorrosive paint and varnish to increase hydrophobicity and chemical resistance to improve hydrophobicity and chemical resistance. Detailed information is available upon request. view less | |
| Novares® C 120 | Rain Carbon Germany GmbH | Novares® C 120 is a Indene-Coumarone Resin; polymerisation product from unsaturated aromatic C9-/C10-hydrocarbons. It is ideal for use in paint and varnish to improve hydrophobicity and chemical resistance. Detailed information is available upon request. | |
| Novares® C 120-VL | Rain Carbon Germany GmbH | Novares® C 120-VL is an Indene-Coumarone Resin; polymerisation product from unsaturated aromatic C9-/C10-hydrocarbons. | |
| Novares® C 140 | Rain Carbon Germany GmbH | Novares® C 140 is a Indene-Coumarone Resin based on aromatic feedstock. It is ideal for use in anticorrosive paint and varnish to increase hydrophobicity and chemical resistance to improve hydrophobicity and chemical resistance. Detailed information is av...view more Novares® C 140 is a Indene-Coumarone Resin based on aromatic feedstock. It is ideal for use in anticorrosive paint and varnish to increase hydrophobicity and chemical resistance to improve hydrophobicity and chemical resistance. Detailed information is available upon request. view less | |
| Novares® C 160 | Rain Carbon Germany GmbH | Novares® C 160 is a Indene-Coumarone Resin based on aromatic feedstock. It is ideal for use in anticorrosive paint and varnish to increase hydrophobicity and chemical resistance to improve hydrophobicity and chemical resistance. Detailed information is a...view more Novares® C 160 is a Indene-Coumarone Resin based on aromatic feedstock. It is ideal for use in anticorrosive paint and varnish to increase hydrophobicity and chemical resistance to improve hydrophobicity and chemical resistance. Detailed information is available upon request. view less | |
| Novares® C 70 | Rain Carbon Germany GmbH | Novares® C 70 is a Indene-Coumarone Resin based on aromatic feedstock. It is ideal for use in anticorrosive paint and varnish to increase hydrophobicity and chemical resistance to improve hydrophobicity and chemical resistance. Detailed information is av...view more Novares® C 70 is a Indene-Coumarone Resin based on aromatic feedstock. It is ideal for use in anticorrosive paint and varnish to increase hydrophobicity and chemical resistance to improve hydrophobicity and chemical resistance. Detailed information is available upon request. view less | |
| Novares® C 80 | Rain Carbon Germany GmbH | Novares® C 80 is a Indene-Coumarone Resin based on aromatic feedstock. It is ideal for use in anticorrosive paint and varnish to increase hydrophobicity and chemical resistance to improve hydrophobicity and chemical resistance. Detailed information is av...view more Novares® C 80 is a Indene-Coumarone Resin based on aromatic feedstock. It is ideal for use in anticorrosive paint and varnish to increase hydrophobicity and chemical resistance to improve hydrophobicity and chemical resistance. Detailed information is available upon request. view less | |
| Novares® C 90 | Rain Carbon Germany GmbH | Novares® C 90 is a Indene-Coumarone Resin based on aromatic feedstock. It is ideal for use in anticorrosive paint and varnish to increase hydrophobicity and chemical resistance to improve hydrophobicity and chemical resistance. Detailed information is av...view more Novares® C 90 is a Indene-Coumarone Resin based on aromatic feedstock. It is ideal for use in anticorrosive paint and varnish to increase hydrophobicity and chemical resistance to improve hydrophobicity and chemical resistance. Detailed information is available upon request. view less | |
| Novares® CA 100 | Rain Carbon Germany GmbH | Novares® CA 100 is a Indene-Cumarone resin(SP 100 °C) containing phenolic OH groups.It is ideal to use in anticorrosive and marine paints based on epoxy and polyurethane to increase hydophobicity and chemical resistance. Additionaly it works as adhesion ...view more Novares® CA 100 is a Indene-Cumarone resin(SP 100 °C) containing phenolic OH groups.It is ideal to use in anticorrosive and marine paints based on epoxy and polyurethane to increase hydophobicity and chemical resistance. Additionaly it works as adhesion promotor on metals. Detailed information is available upon request. view less | |
| Novares® CA 80 Liquid | Rain Carbon Germany GmbH | Novares® CA 80 is a Indene-Cumarone resin(SP 80 °C) containing phenolic OH groups.It is ideal to use in anticorrosive and marine paints based on epoxy and polyurethane to increase hydophobicity and chemical resistance. Additionaly it works as adhesion p...view more Novares® CA 80 is a Indene-Cumarone resin(SP 80 °C) containing phenolic OH groups.It is ideal to use in anticorrosive and marine paints based on epoxy and polyurethane to increase hydophobicity and chemical resistance. Additionaly it works as adhesion promotor on metals. Detailed information is available upon request. view less | |
| Novares® CA 80 Solid | Rain Carbon Germany GmbH | Novares® CA 80 is a Indene-Cumarone resin(SP 80 °C) containing phenolic OH groups.It is ideal to use in anticorrosive and marine paints based on epoxy and polyurethane to increase hydophobicity and chemical resistance. Additionaly it works as adhesion p...view more Novares® CA 80 is a Indene-Cumarone resin(SP 80 °C) containing phenolic OH groups.It is ideal to use in anticorrosive and marine paints based on epoxy and polyurethane to increase hydophobicity and chemical resistance. Additionaly it works as adhesion promotor on metals. Detailed information is available upon request. view less | |
| Novares® H 1100 | Rain Carbon Germany GmbH | Novares® H 1100 is based on on aromatic hydrocarbons and desinged as VOC free coal tar replacement with better labeling. It provides great compatibility with epoxy and polyurethane systems and is used to increase hydrophobicity, flexibility and adhesion ...view more Novares® H 1100 is based on on aromatic hydrocarbons and desinged as VOC free coal tar replacement with better labeling. It provides great compatibility with epoxy and polyurethane systems and is used to increase hydrophobicity, flexibility and adhesion on metals. It is ideal for use casting resins, sealing compounds, and corrosion protection. Detailed information is available upon request. view less | |
| Novares® H 2100 | Rain Carbon Germany GmbH | Novares® H 2100 is based on on aromatic hydrocarbons and desinged as VOC free coal tar replacement with better labeling. It provides great compatibility with epoxy and polyurethane systems and is used to increase hydrophobicity, flexibility and adhesion ...view more Novares® H 2100 is based on on aromatic hydrocarbons and desinged as VOC free coal tar replacement with better labeling. It provides great compatibility with epoxy and polyurethane systems and is used to increase hydrophobicity, flexibility and adhesion on metals. It is ideal for use casting resins, sealing compounds, and corrosion protection. Detailed information is available upon request. view less | |
| Novares® C 30 | Rain Carbon Germany GmbH | Novares® C 30 is a Indene-Coumarone Resin based on aromatic feedstock. It is ideal for use in anticorrosive paint and varnish to increase hydrophobicity and chemical resistance to improve hydrophobicity and chemical resistance. Detailed information is ava...view more Novares® C 30 is a Indene-Coumarone Resin based on aromatic feedstock. It is ideal for use in anticorrosive paint and varnish to increase hydrophobicity and chemical resistance to improve hydrophobicity and chemical resistance. Detailed information is available upon request. view less | |
| Novares® H 2500 | Rain Carbon Germany GmbH | Novares® H 2500 is based on on aromatic hydrocarbons and desinged as VOC free coal tar replacement with better labeling. It provides great compatibility with epoxy and polyurethane systems and is used to increase hydrophobicity, flexibility and adhesion o...view more Novares® H 2500 is based on on aromatic hydrocarbons and desinged as VOC free coal tar replacement with better labeling. It provides great compatibility with epoxy and polyurethane systems and is used to increase hydrophobicity, flexibility and adhesion on metals. It is ideal for use casting resins, sealing compounds, and corrosion protection. Detailed information is available upon request. view less | |
| Novares® HA 1100 | Rain Carbon Germany GmbH | Novares® HA 1100 is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged as VOC free coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applicat...view more Novares® HA 1100 is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged as VOC free coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applications are sealing compounds and corrosion protection paints to increase hydrophobicity, flexibility and adhesion on metals. Detailed information is available upon request. view less | |
| Novares® HA 1200-L | Rain Carbon Germany GmbH | Novares® HA 1200-L is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applications are ...view more Novares® HA 1200-L is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applications are sealing compounds and corrosion protection paints to increase hydrophobicity, flexibility and adhesion on metals. Low viscous alternative to Novares HA 2100 (contains Xylene). Detailed information is available upon request. view less | |
| Novares® HA 2100 | Rain Carbon Germany GmbH | Novares® HA 2100 is based on on aromatic hydrocarbons modified with phenolic OH groups. It is desinged as VOC free coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applications are ...view more Novares® HA 2100 is based on on aromatic hydrocarbons modified with phenolic OH groups. It is desinged as VOC free coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applications are sealing compounds and corrosion protection paints to increase hydrophobicity, flexibility and adhesion on metals.Detailed information is available upon request. view less | |
| Novares® HA 2200 | Rain Carbon Germany GmbH | Novares® HA 2200 is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged as VOC free coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applicat...view more Novares® HA 2200 is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged as VOC free coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applications are sealing compounds and corrosion protection paints to increase hydrophobicity, flexibility and adhesion on metals. Detailed information is available upon request. view less | |
| Novares® HA 2500 | Rain Carbon Germany GmbH | Novares® HA 2500 is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged as coal tar replacement and provides great compatibility with epoxy and polyurethane systems. Best known applications are sealing compounds and...view more Novares® HA 2500 is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged as coal tar replacement and provides great compatibility with epoxy and polyurethane systems. Best known applications are sealing compounds and corrosion protection paints to increase hydrophobicity, flexibility and adhesion on metals. Detailed information is available upon request. view less | |
| Novares® HA 30 | Rain Carbon Germany GmbH | Novares® HA 30 is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged as VOC free coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applicatio...view more Novares® HA 30 is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged as VOC free coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applications are sealing compounds and corrosion protection paints to increase hydrophobicity, flexibility and adhesion on metals. Detailed information is available upon request. view less | |
| Novares® HA S 1100 | Rain Carbon Germany GmbH | Novares® K 200 is a formulation based on aromatic hydrocarbons. | |
| Novares® K 200 | Rain Carbon Germany GmbH | Novares® K 200 is a formulation based on aromatic hydrocarbons. | |
| Novares® L 100 | Rain Carbon Germany GmbH | Novares® L 100 is a liquid low viscous modifier (50 - 150 mPas @ 25°C) without phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a pla...view more Novares® L 100 is a liquid low viscous modifier (50 - 150 mPas @ 25°C) without phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| NOVARES® L 40 | Rain Carbon Germany GmbH | NOVARES® L 40 is a special liquid resin that is ideal for use in water-borne adhesives, flooring adhesives, sealants, jointing compounds, floor coatings, sealing compounds, and casting resins | |
| Novares® L 800 | Rain Carbon Germany GmbH | Novares® L 800 is a liquid high viscous hydrocarbon modifier (800 - 1000 mPas@ 25°C) based on hydrophobic monomers, which leads to great chemical and saltspray resistance in epoxy, polyurethane systems. It also increases flexibility and reduces viscosity ...view more Novares® L 800 is a liquid high viscous hydrocarbon modifier (800 - 1000 mPas@ 25°C) based on hydrophobic monomers, which leads to great chemical and saltspray resistance in epoxy, polyurethane systems. It also increases flexibility and reduces viscosity without contributing to VOC. The main application is corrosion protection for industrial paints, heavy duty marine paints, civil engineering and roof coating. This product can be used as plasticizer and also works as adhesion promoter and hyrophobing agent. Detailed information are available upon request. view less | |
| Novares® LA 100 | Rain Carbon Germany GmbH | Novares® LA 100 is a liquid low viscous modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing a...view more Novares® LA 100 is a liquid low viscous modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications industrial paints and floor coatings based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LA 1000 | Rain Carbon Germany GmbH | Novares® LA 1000 is a high viscous liquid modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing ...view more Novares® LA 1000 is a high viscous liquid modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications are industrial and marine anti-corrosive paints based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LA 1200 | Rain Carbon Germany GmbH | Novares® LA 1200 is a high viscous liquid modifier (1200 - 1500 mPas @25°C) with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a ...view more Novares® LA 1200 is a high viscous liquid modifier (1200 - 1500 mPas @25°C) with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications are industrial and marine anti-corrosive paints based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LA 1900 | Rain Carbon Germany GmbH | Novares® LA 1900 is a high viscous liquid modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing ...view more Novares® LA 1900 is a high viscous liquid modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications are industrial and marine anti-corrosive paints based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LA 300 | Rain Carbon Germany GmbH | Novares® LA 300 is a liquid low viscous modifier (300 - 400 mPas @ 25°C) with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a pla...view more Novares® LA 300 is a liquid low viscous modifier (300 - 400 mPas @ 25°C) with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications industrial paints and floor coatings based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LA 700 | Rain Carbon Germany GmbH | Novares® LA 700 is a liquid midum viscous modifier (700 - 800 mPas @25°C) with phenolic OH functionality. It is recommended for high solid and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasti...view more Novares® LA 700 is a liquid midum viscous modifier (700 - 800 mPas @25°C) with phenolic OH functionality. It is recommended for high solid and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications are industrial and marine anti-corrosive paints based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 15 | Rain Carbon Germany GmbH | Novares® LC 15 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a low polarity with an phenolic OH content of 1,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyuretha...view more Novares® LC 15 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a low polarity with an phenolic OH content of 1,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 20 | Rain Carbon Germany GmbH | Novares® LC 20 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 2,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyure...view more Novares® LC 20 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 2,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 25 | Rain Carbon Germany GmbH | Novares® LC 25 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 2,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyure...view more Novares® LC 25 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 2,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 40 | Rain Carbon Germany GmbH | Novares® LC 40 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 4,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyure...view more Novares® LC 40 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 4,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 45 | Rain Carbon Germany GmbH | Novares® LC 45 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 4,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyure...view more Novares® LC 45 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 4,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 50 | Rain Carbon Germany GmbH | Novares® LC 50 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyureth...view more Novares® LC 50 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. For epoxy formulations this product can be used as curing accelerator. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 55 | Rain Carbon Germany GmbH | Novares® LC 55 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyureth...view more Novares® LC 55 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. For epoxy formulations this product can be used as curing accelerator. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 60 | Rain Carbon Germany GmbH | Novares® LC 60 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyuretha...view more Novares® LC 60 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. For epoxy formulations this product can be used as curing accelerator. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 65 | Rain Carbon Germany GmbH | Novares® LC 65 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a the highest polarity with an phenolic OH content of 6,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, po...view more Novares® LC 65 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a the highest polarity with an phenolic OH content of 6,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. For epoxy formulations this product can be used as curing accelerator. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LM 5000 | Rain Carbon Germany GmbH | Novares® LM 5000 is an aromatic special liquid resin. | |
| Novares® LMS 500 | Rain Carbon Germany GmbH | Novares® LMS 500 is an aromatic special liquid resin. | |
| Novares® LR 600 W | Rain Carbon Germany GmbH | Novares® LR 600 W is an epoxyfunctional low viscous modifier with hydrophobic character. Water miscible. | |
| Novares® LS 500 | Rain Carbon Germany GmbH | NOVARES® LS 500 is a harmless replacement of Nonylphenol as accelerator for the epoxy curing. In EP, but also in PU and thermoplastic polyacrylics it is an excellent plasticizer, pigment wetting agent, and compatibilizer. Depending on national standards N...view more NOVARES® LS 500 is a harmless replacement of Nonylphenol as accelerator for the epoxy curing. In EP, but also in PU and thermoplastic polyacrylics it is an excellent plasticizer, pigment wetting agent, and compatibilizer. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information are available upon request. view less | |
| Novares® MP 50 | Rain Carbon Germany GmbH | Novares® MP 50 is a phenol modified aromatic resin. | |
| Novares® TA 100 | Rain Carbon Germany GmbH | Novares® TA 100 is a hydrocarbon resin(SP 100 °C) containing phenolic OH groups.It is ideal to use in anticorrosive and marine paints based on epoxy and polyurethane to increase hydophobicity and chemical resistance. Additionaly it works as adhesion promo...view more Novares® TA 100 is a hydrocarbon resin(SP 100 °C) containing phenolic OH groups.It is ideal to use in anticorrosive and marine paints based on epoxy and polyurethane to increase hydophobicity and chemical resistance. Additionaly it works as adhesion promotor on metals.Detailed information is available upon request. view less | |
| Novares® TD 100 | Rain Carbon Germany GmbH | Novares® TD 100 is a hydrocarbon Resin; polymerisation product from unsaturated aromatic C9-/C10-hydrocarbons. | |
| Novares® TD 110 | Rain Carbon Germany GmbH | Novares® TD 110 is a hydrocarbon Resin; polymerisation product from unsaturated aromatic C9- /C10-hydrocarbons. | |
| Novares® TD 90 | Rain Carbon Germany GmbH | Novares® TD 90 is a hydrocarbon Resin; polymerisation product from unsaturated aromatic C9-/C10-hydrocarbons. | |
| Novares® TK 100 Solid | Rain Carbon Germany GmbH | Novares® TK 100 Solid is a hydrocarbon Resin; copolymerisation product from unsaturated aromatic C9-/C10-hydrocarbons with an unsaturated aliphatic component. | |
| Novares® TK 120 | Rain Carbon Germany GmbH | Novares® TK 120 is a hydrocarbon Resin; copolymerisation product from unsaturated aromatic C9-/C10-hydrocarbons with an unsaturated aliphatic component. | |
| Novares® TK 90 | Rain Carbon Germany GmbH | Novares® TK 90 is a hydrocarbon Resin; copolymerisation product from unsaturated aromatic C9-/C10-hydrocarbons with an unsaturated aliphatic component. | |
| Novares® TL 10 | Rain Carbon Germany GmbH | Novares® TL 10 is a liquid but high viscous hydrocarbon resin. It is ideal for use in primers for marine and industrial paints to imporve hydrophobicity, flexibility and adhesion properties on metals. Detailed information is available upon request. | |
| Novares® TL 10 Xylene | Rain Carbon Germany GmbH | Novares® TL 10 Xylene is a hydrocarbon Resin NOVARES TL 10 with 10 % Xylene; polymerisation product from unsaturated aromatic C9/C10-hydrocarbons dissolved in Xylene. | |
| Novares® TL 100 | Rain Carbon Germany GmbH | Novares® TL 100 is a hydrocarbon resin based on aromatic feedstock. It is ideal to use in solvent based epoxy and polyurethane to increase hydrophobicity and chemical resistance. Additional it works as adhesion promoter in metals. It can also be used to s...view more Novares® TL 100 is a hydrocarbon resin based on aromatic feedstock. It is ideal to use in solvent based epoxy and polyurethane to increase hydrophobicity and chemical resistance. Additional it works as adhesion promoter in metals. It can also be used to support dryingtime, hardness development and hydrophobicity in alkyds. Detailed information is available upon request. view less | |
| Novares® TL 120 | Rain Carbon Germany GmbH | Novares® TL 120 is a liquid but high viscous hydrocarbon resin. It is ideal for use in primers for marine and industrial paints to imporve hydrophobicity, flexibility and adhesion properties on metals. Detailed information is available upon request. | |
| Novares® TL 90 | Rain Carbon Germany GmbH | Novares® TL 90 is a liquid but high viscous hydrocarbon resin. It is ideal for use in primers for marine and industrial paints to imporve hydrophobicity, flexibility and adhesion properties on metals. Detailed information is available upon request. | |
| Novares® TM 100 | Rain Carbon Germany GmbH | Novares® TM 100 is a aromatic hydrocarbon resin (100°C SP) based on pure monomers. Novares TM 100 provides very low colors and good compatibility to polyurtehane, acrylic, UV-curing and epoxy formulation. It is ideal for use in color stable paint and varn...view more Novares® TM 100 is a aromatic hydrocarbon resin (100°C SP) based on pure monomers. Novares TM 100 provides very low colors and good compatibility to polyurtehane, acrylic, UV-curing and epoxy formulation. It is ideal for use in color stable paint and varnish to improve hydrophobicity, flexibility and chemical resistance. Detailed information is available upon request. view less | |
| Novares® TM 20 AS | Rain Carbon Germany GmbH | Novares® TM 20 AS is a liquid but high viscous Hydrocarbon Resin. It is a pure monomer resin with good compatibility to epoxy, polyurethane and acrylics. NOVARES TM 20 AS is ideal for use in casting resins, sealing compounds, and protective coatings to im...view more Novares® TM 20 AS is a liquid but high viscous Hydrocarbon Resin. It is a pure monomer resin with good compatibility to epoxy, polyurethane and acrylics. NOVARES TM 20 AS is ideal for use in casting resins, sealing compounds, and protective coatings to improve low temperature flexibility, hydrophobicity and chemical resistance. Detailed information is available upon request. view less | |
| Novares® TM 70 S | Rain Carbon Germany GmbH | Novares® TM 70 S is a hydrocarbon resin (70°C SP) basesd on pure aromatic monomers. It is specially desinged für UV curing paints to increase flexibillity, hydrophobicity and adhesion properties on metals. It can also be used in light colored polyurethans...view more Novares® TM 70 S is a hydrocarbon resin (70°C SP) basesd on pure aromatic monomers. It is specially desinged für UV curing paints to increase flexibillity, hydrophobicity and adhesion properties on metals. It can also be used in light colored polyurethans and acrylics. Detailed information is available upon request. view less | |
| Novares® TM 85 Adhesive | Rain Carbon Germany GmbH | Novares® TM 85 AS Adhesive is a pure monomer hydrocarbon resin, polymerisation product from unsaturated aromatic hydrocarbons. | |
| Novares® TM 85 AS | Rain Carbon Germany GmbH | Novares® TM 85 AS is a aromatic hydrocarbon resin (85°C SP) based on pure monomers. Novares® TM 85 AS provides very low colors and good compatibility to polyurtehane, acrylic, UV-curing and epoxy formulation. It is ideal for use in color stable paint and ...view more Novares® TM 85 AS is a aromatic hydrocarbon resin (85°C SP) based on pure monomers. Novares® TM 85 AS provides very low colors and good compatibility to polyurtehane, acrylic, UV-curing and epoxy formulation. It is ideal for use in color stable paint and varnish to improve hydrophobicity, flexibility and chemical resistance. Detailed information is available upon request. view less | |
| Novares® TM 90 S | Rain Carbon Germany GmbH | Novares® TM 90 S is a aromatic hydrocarbon resin (90°C SP) based on pure monomers. Novares® Pure 90S provides very low colors and good compatibility to polyurtehane, acrylic, UV-curing and epoxy formulation. It is ideal for use in color stable paint and ...view more Novares® TM 90 S is a aromatic hydrocarbon resin (90°C SP) based on pure monomers. Novares® Pure 90S provides very low colors and good compatibility to polyurtehane, acrylic, UV-curing and epoxy formulation. It is ideal for use in color stable paint and varnish to improve hydrophobicity, flexibility and chemical resistance. Detailed information is available upon request. view less |
