| Diethylene Glycol Dibutyl Ether | Clariant - Coatings & Construction Chemicals | Diethylene Glycol Dibutyl Ether is a clear, colorless liquid with a characteristic odor. The solvent features a low freezing point, high boiling point, and low viscosity. It is miscible in any ratio with solvents such as ethanol, acetone, benzene, ether, ...view more Diethylene Glycol Dibutyl Ether is a clear, colorless liquid with a characteristic odor. The solvent features a low freezing point, high boiling point, and low viscosity. It is miscible in any ratio with solvents such as ethanol, acetone, benzene, ether, and chlorinated hydrocarbons. It has little to no solubility in water and high molecular weight aliphatic hydrocarbons. DEGDBE is an excellent solvent for a wide range of polar and non-polar substances. Diethylene glycol dibutyl ether is an inert, aprotic solvent. It has wide applicability in various types of cleaning formulations. Examples include grease, wax, and stain removers and special low-flammability non-aqueous cleaning systems for electronic equipment. DEGDBE is used as a solvent for several coatings applications. It is a good coalescing agent with coupling ability. It is also used as solvent for inkjet inks, in formulations of deletion fluids for positive printing plates, retouching agents for lithographic printing and in cleaning agents for removing inks from printing machines. view less | |
| Diethylene Glycol Dimethyl Ether | Clariant - Coatings & Construction Chemicals | Diethylene Glycol Dimethyl Ether is a neutral, slightly volatile, colorless liquid. Because of the free electron pairs at the oxygen atoms it has high solvating power and is miscible with water and all common solvents in any ratio. As a result of its chem...view more Diethylene Glycol Dimethyl Ether is a neutral, slightly volatile, colorless liquid. Because of the free electron pairs at the oxygen atoms it has high solvating power and is miscible with water and all common solvents in any ratio. As a result of its chemical stability and the absence of reactive groups, Diethylene glycol dimethyl ether can be used as an inert reaction medium for many organic and organometallic reactions and for polymerizations. view less | |
| Dipropylene Glycol Dimethyl Ether | Clariant - Coatings & Construction Chemicals | Dipropylene Glycol Dimethyl Ether (DPGDME) is a colorless liquid with a mild, pleasant odor. It is completely miscible with most common organic solvents. However, it has limited solubility in water. DPGDME has no hydroxyl functionality. It is an inert, ap...view more Dipropylene Glycol Dimethyl Ether (DPGDME) is a colorless liquid with a mild, pleasant odor. It is completely miscible with most common organic solvents. However, it has limited solubility in water. DPGDME has no hydroxyl functionality. It is an inert, aprotic solvent and can be used in proton sensitive systems. Dipropylene Glycol Dimethyl Ether is not listed as a Hazardous Air Pollutant, has low toxicity, and offers an alternative to solvents being phased out as a result of the Clean Air Act. Due to its chemical stability and the absence of reactive groups, DPGDME can also be used as an inert reaction medium, e. g. for reactions with alkali and alkaline-earth metals (Grignard reactions), polymerizations etc. Dipropylene Glycol Dimethyl Ether is used in solvent-based coatings and water-based polyurethane/ isocyanate coating systems. It is used as environmentally friendly substitute for NMP (N-methyl pyrrolidone) e.g as as coalescing agent in water based polyurethane dispersions. Dipropylene glycol dimethyl ether is also used as a solvent for wood and furniture coatings as well as a solvent for hardeners. view less | |
| Dispersogen® 145 | Clariant - Coatings & Construction Chemicals | Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is a mixture of the mono‐ and diester of phosphoric acid based on long chain alkyl polyethylene glycols. Dispersogen® 145 is used as dispersing agent for point‐of‐sales coloran...view more Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is a mixture of the mono‐ and diester of phosphoric acid based on long chain alkyl polyethylene glycols. Dispersogen® 145 is used as dispersing agent for point‐of‐sales colorants in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. view less | |
| Dispersogen® 1728 | Clariant - Coatings & Construction Chemicals | Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is used for water based and solvent based pigment preparations, disperse dyes and printing inks. This product is suitable for inorganic pigments, carbon black and organic pigme...view more Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is used for water based and solvent based pigment preparations, disperse dyes and printing inks. This product is suitable for inorganic pigments, carbon black and organic pigments. The advantages of Dispersogen® 1728 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation and low foaming. This slightly cloudy, viscous or pasty liquid is composed of an aqueous solution of a novolac derivative. view less | |
| Dispersogen® 2774 | Clariant - Coatings & Construction Chemicals | Dispersogen® 2774 is a nonionic dispersing agent for pigments and minerals. It is used as a dispersing agent for aqueous and solvent based pigment preparations and printing inks. Dispersogen® 2774 is specially suitable for carbon black and for organic pig...view more Dispersogen® 2774 is a nonionic dispersing agent for pigments and minerals. It is used as a dispersing agent for aqueous and solvent based pigment preparations and printing inks. Dispersogen® 2774 is specially suitable for carbon black and for organic pigments in aqueous pigment preparations. The advantages of Dispersogen® 2774 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. This yellowish, viscous to pasty liquid is composed of a novolac alkoxylate. view less | |
| Dispersogen® 3169 | Clariant - Coatings & Construction Chemicals | Dispersogen® 3169 is a anionic dispersing agent for pigments. This brownish, clear liquid is an aqueous solution of an anionic novolac derivative. Dispersogen® 3169 is used for water based and solvent based pigment preparations, disperse dyes and printing...view more Dispersogen® 3169 is a anionic dispersing agent for pigments. This brownish, clear liquid is an aqueous solution of an anionic novolac derivative. Dispersogen® 3169 is used for water based and solvent based pigment preparations, disperse dyes and printing inks. It is suitable for inorganic pigments, carbon black and in particular for organic pigments. The advantages of Dispersing® Agent 3169 are high pigment concentration, low viscosity of the preparation, high stability of the preparation and low foaming. view less | |
| Dispersogen® 4387 | Clariant - Coatings & Construction Chemicals | Dispersogen® 4387 is an anionic dispersing agent for pigments and minerals. It is used for water based, solvent based of water / solvent based pigment preparations, paper printing inks, textile printing pastes and coatings. Dispersogen® 4387 is suitable f...view more Dispersogen® 4387 is an anionic dispersing agent for pigments and minerals. It is used for water based, solvent based of water / solvent based pigment preparations, paper printing inks, textile printing pastes and coatings. Dispersogen® 4387 is suitable for inorganic pigments (metal oxids), carbon black and especially for organic pigments (polycylcic and phthalocyanine pigments) that are difficult to disperse. This brown, cloudy liquid is free of any additional biocide, and it is composed of a modified castor oil derivative. The advantages of Dispersogen® 4387 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. view less | |
| Dispersogen® AN 100 | Clariant - Coatings & Construction Chemicals | Dispersogen® AN 100 is a dispersing agent for universal colorants. It is a 3 – in – 1 product with nonionic and anionic surface active components and a polyglycol as humectant. This product functions as a wetting agent, dispersing agent, stabilizer, humec...view more Dispersogen® AN 100 is a dispersing agent for universal colorants. It is a 3 – in – 1 product with nonionic and anionic surface active components and a polyglycol as humectant. This product functions as a wetting agent, dispersing agent, stabilizer, humectant, and compatibilizer. Dispersogen® AN 100 is suitable for both inorganic and organic pigments. An additional humectant is not necessary. view less | |
| Dispersogen® FA | Clariant - Coatings & Construction Chemicals | Dispersogen® FA is a nonionic surfactant used as a wetting and dispersing agent for waterborne pigment preparations and emulsifier for water-in-oil and oil-in-water emulsions in paints and coatings. Dispersogen® FA is recommended for inorganic pigment pr...view more Dispersogen® FA is a nonionic surfactant used as a wetting and dispersing agent for waterborne pigment preparations and emulsifier for water-in-oil and oil-in-water emulsions in paints and coatings. Dispersogen® FA is recommended for inorganic pigment preparations and point of sale colorants. view less | |
| Dispersogen® FN | Clariant - Coatings & Construction Chemicals | Dispersogen® FN is a wetting and dispersing agent for waterborne pigment preparations. It is recommended for inorganic pigment preparations and point-of-sales colorants. | |
| Dispersogen® FSE | Clariant - Coatings & Construction Chemicals | Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE ...view more Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE is often used for inorganic pigments in combination with fatty amines like Genamin® CC 100 or Genamin® TA 100. Dispersogen® FSE offers a balanced viscosity to minimize sedimentation and at the same time enables dosing, pumping and feeding. A slightly alkaline pH of 7.5 - 8.5, adjusted by alkali like caustic soda, reduces the viscosity. view less | |
| Dispersogen® LEC | Clariant - Coatings & Construction Chemicals | Dispersogen® LEC is an amphoteric surfactant that functions as an emulsifier and dispersing agent. It is used as dispersing agent for inorganic pigments in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. This product improves the th...view more Dispersogen® LEC is an amphoteric surfactant that functions as an emulsifier and dispersing agent. It is used as dispersing agent for inorganic pigments in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. This product improves the the stability of colorants and the compatibility with waterborne and solvent-born coatings. view less | |
| Dispersogen® LFH | Clariant - Coatings & Construction Chemicals | Dispersogen® LFH is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide. Dispersogen® LFH is an anionic AP-free dispersing agent and used for water / solvent based pigment preparations. It...view more Dispersogen® LFH is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide. Dispersogen® LFH is an anionic AP-free dispersing agent and used for water / solvent based pigment preparations. It is suitable for inorganic pigments, carbon black and for organic pigments. The advantages of Dispersogen® LFH are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. view less | |
| Dispersogen® PCE | Clariant - Coatings & Construction Chemicals | Dispersogen® PCE is a modified polycarboxylate used for dispersing inorganic pigments. This product is composed of carboxylic acid groups on the principle polymer chain and polyethylene glycol ether side chains. The anionic charges on the principle chai...view more Dispersogen® PCE is a modified polycarboxylate used for dispersing inorganic pigments. This product is composed of carboxylic acid groups on the principle polymer chain and polyethylene glycol ether side chains. The anionic charges on the principle chain absorb onto the inorganic pigments and provide steric stabilization due to the polyethylene glycol ether side chains. This mechanism is sometimes superior to the electrostatic stabilization of polyacrylic acid salts or copolymers of acrylic acid and maleic acid resulting in higher dispersion stability. view less | |
| Dispersogen® PL 30 | Clariant - Coatings & Construction Chemicals | Dispersogen® PL 30 is an extremely efficient polymeric dispersing agent for waterborne in-plant tinters based on organic pigments. It is able to disperse very high pigment loads while still forming stable low viscous pigments pastes. | |
| Dispersogen® PL 40 | Clariant - Coatings & Construction Chemicals | Dispersogen® PL 40 is an anionic graft copolymer. This product is a polymeric dispersing agent for organic pigments and carbon blacks in aqueous pigment preparations. Dispersogen® PL 40 provides low dispersion viscosity of the pigment dispersion, preven...view more Dispersogen® PL 40 is an anionic graft copolymer. This product is a polymeric dispersing agent for organic pigments and carbon blacks in aqueous pigment preparations. Dispersogen® PL 40 provides low dispersion viscosity of the pigment dispersion, prevents sedimentation or syneresis and demonstrates good compatibility with resins and binders in waterborne coatings and inks. view less | |
| Dispersogen® PSM | Clariant - Coatings & Construction Chemicals | Dispersogen® PSM is a rheology modifier for pigment pastes. By absorbing onto the pigment surface and forming a protective layer, inter-particle forces are shielded and the viscosity of the pigment preparation is decreased. When Dispersogen® PSM is comb...view more Dispersogen® PSM is a rheology modifier for pigment pastes. By absorbing onto the pigment surface and forming a protective layer, inter-particle forces are shielded and the viscosity of the pigment preparation is decreased. When Dispersogen® PSM is combined with dispersing agents like Dispersogen® FA, Dispersogen® FSE or Dispersogen® ECS, formulators can reduce the viscosity of the pigment dispersion and increase the pigment concentration. view less | |
| Dispersogen® PTS | Clariant - Coatings & Construction Chemicals | Dispersogen® PTS is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. It is used for aqueous pigment dispersions, preparations, paints and coatings as a wetting and dispersing agent for pigments and as...view more Dispersogen® PTS is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. It is used for aqueous pigment dispersions, preparations, paints and coatings as a wetting and dispersing agent for pigments and as emulsifier for polymer dispersions. This product is preferably suitable for organic pigments and carbon blacks and allows the production of stable, free flowing pigment preparations with low VOC – content and low odor. view less | |
| Dispersogen® SNW | Clariant - Coatings & Construction Chemicals | Dispersogen® SNW is a dispersing agent for paints and coatings. It also offers wetting properties, improves the compatibility of pigments with resins and solvents, and prevents rub out. This product improves the compatibility of organic pigments like Phth...view more Dispersogen® SNW is a dispersing agent for paints and coatings. It also offers wetting properties, improves the compatibility of pigments with resins and solvents, and prevents rub out. This product improves the compatibility of organic pigments like Phthalocyanine pigments (blues and green), Quinacridone pigments (red and purple) and other polycyclic pigments. Also carbon blacks are dispersed and the tinting strength in improves. view less | |
| Dispersogen® UDN | Clariant - Coatings & Construction Chemicals | Dispersogen® UDN is a mixture of nonionic dispersing and wetting agents used in pigment preparations. This yellowish liquid is suitable for inorganic pigments, organic pigments, and carbon black to produce stable, free flowing pigment preparations with hi...view more Dispersogen® UDN is a mixture of nonionic dispersing and wetting agents used in pigment preparations. This yellowish liquid is suitable for inorganic pigments, organic pigments, and carbon black to produce stable, free flowing pigment preparations with high solid contents. Dispersogen® UDN is used in emulsion paints to improve compatibility of pigments and minerals with polymers and binders and to enhance the tinting strength of organic pigments. view less | |
| Emulsogen® 4084 | Clariant - Coatings & Construction Chemicals | Emulsogen® 4084 is a nonionic emulsifier for emulsion polymerization. This pale yellow wax is composed of block copolymer of propylene oxide and ethylene oxide, containing 60% w/w ethylene oxide. Emulsogen® 4084 is used in emulsion polymerization of polyv...view more Emulsogen® 4084 is a nonionic emulsifier for emulsion polymerization. This pale yellow wax is composed of block copolymer of propylene oxide and ethylene oxide, containing 60% w/w ethylene oxide. Emulsogen® 4084 is used in emulsion polymerization of polyvinyl acetate, acrylate and styrene/acrylate dispersions to stabilize the rheological behaviour of the polymer dispersions and to improve the electrolyte and shear stability. It can be used in combination with other nonionic, anionic and cationic surfactants. view less | |
| Emulsogen® EPA 073 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPA 073 is an anionic emulsifier, wetting and dispersing agent. This product is designed for use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for pa...view more Emulsogen® EPA 073 is an anionic emulsifier, wetting and dispersing agent. This product is designed for use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for paper and paperboard complying with 21 C.F.R. Sections 176.170 and 176.180 in contact with all types of food. view less | |
| Emulsogen® EPA 1954 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPA 1954 is an anionic surfactant for industrial applications. It is used as an emulsifier for emulsion polymerization to produce polymer dispersions. The use of Emulsogen® EPA 1954 allows the production of polymer dispersions with controlled p...view more Emulsogen® EPA 1954 is an anionic surfactant for industrial applications. It is used as an emulsifier for emulsion polymerization to produce polymer dispersions. The use of Emulsogen® EPA 1954 allows the production of polymer dispersions with controlled particle size and low coagulation during the polymerization process. view less | |
| Emulsogen® EPN 118 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPN 118 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene. | |
| Emulsogen® EPN 217 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPN 217 is a nonionic emulsifier for emulsion polymerization. It is used as emulsifier in emulsion polymerization of olefinic monomers to reduce the grit level during polymerization and to improve the dispersion properties such as freeze-thaw s...view more Emulsogen® EPN 217 is a nonionic emulsifier for emulsion polymerization. It is used as emulsifier in emulsion polymerization of olefinic monomers to reduce the grit level during polymerization and to improve the dispersion properties such as freeze-thaw stability, electrolyte and sheer stability. view less | |
| Emulsogen® EPN 287 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPN 287 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylic and styrene / acrylic dispersions and for butadien...view more Emulsogen® EPN 287 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylic and styrene / acrylic dispersions and for butadiene / styrene latex. view less | |
| Emulsogen® EPN 407 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPN 407 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylate and styrene / acrylate dispersions and for butadi...view more Emulsogen® EPN 407 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylate and styrene / acrylate dispersions and for butadiene / styrene latex. view less | |
| Emulsogen® LA 083 | Clariant - Coatings & Construction Chemicals | Emulsogen® LA 083 is an anionic emulsifier and dispersing agent. It is composed of alkyl polyethylene glycol ether sulphate with 8 mole ethylene oxide, ammonium salt. This product is readily biodegradable and free of additional preservatives. Emulsogen® L...view more Emulsogen® LA 083 is an anionic emulsifier and dispersing agent. It is composed of alkyl polyethylene glycol ether sulphate with 8 mole ethylene oxide, ammonium salt. This product is readily biodegradable and free of additional preservatives. Emulsogen® LA 083 is used as an emulsifier for emulsion polymerization of vinyl acetate, acrylic acid esters, methacrylic acid esters, styrene and other monomers. This product is also used as a dispersing agent for pigments to produce low viscous, stable pigment dispersions. view less | |
| Emulsogen® LCN 070 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 070 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 7 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 070 can be ...view more Emulsogen® LCN 070 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 7 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 070 can be used for the following applications: as wetting agent for industrial applications in aqueous solutions of 1 - 5 g/l; as wetting and dispersing agent in paints and coatings for fillers and pigments in concentrations of 0,5 - 1,0 %; as emulsifier for O/W - emulsions of oils, fats, silicon oils and polyolefin wax emulsions in concentrations of 5- 10 %; and as emulsifier for emulsion polymerization in recommended levels of 1 - 2 % based on monomers. view less | |
| Emulsogen® LCN 088 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 088 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 8 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 088 is used as...view more Emulsogen® LCN 088 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 8 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 088 is used as a wetting agent for industrial applications in aqueous solutions of 1 - 5 g/l and as a dispersing agent in paints and coatings for fillers and pigments in concentrations of 0,1 - 1,0 %. Emulsogen® LCN 088 is also used as an emulsifier for O/W -emulsions of oils, fats, silicon oils and polyolefin wax emulsions in concentrations of 5- 10 % and for emulsion polymerization in recommended levels of 1- 2 % based on monomers. view less | |
| Emulsogen® LCN 118 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 118 is a nonionic emulsifier for industrial applications. It is ready biodegradable and contains no additional biocides. This product is used as an emulsifier for emulsion polymerization to improve the shear, temperature and electrolyte sta...view more Emulsogen® LCN 118 is a nonionic emulsifier for industrial applications. It is ready biodegradable and contains no additional biocides. This product is used as an emulsifier for emulsion polymerization to improve the shear, temperature and electrolyte stability of polymer dispersions. Emulsogen® LCN 118 is also used as a dispersing agent for emulsion paints to improve the scrub resistance. view less | |
| Emulsogen® LCN 158 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 158 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 15 mole ethylene oxide. This product is is readily biodegradable and contains no additional biocides. Emulsogen® LCN 158 is use...view more Emulsogen® LCN 158 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 15 mole ethylene oxide. This product is is readily biodegradable and contains no additional biocides. Emulsogen® LCN 158 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. It is also used as a dispersing agent for emulsion paints to improve the scrub resistance. view less | |
| Emulsogen® LCN 217 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 217 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 21 mole ethylene oxide. This product is ready biodegradable and contains no additional biocides. Emulsogen® LCN 217 is used as ...view more Emulsogen® LCN 217 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 21 mole ethylene oxide. This product is ready biodegradable and contains no additional biocides. Emulsogen® LCN 217 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. This product is also is used as a dispersing agent for emulsion paints to improve the scrub resistance. view less | |
| Emulsogen® LCN 287 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 287 is a nonionic emulsifier for industrial applications. It is used as emulsifier for emulsion polymerization of vinyl acetate, styrene and acrylate homo- and copolymers together with anionic surfactants like Emulsogen® EPA 073. Emulsogen®...view more Emulsogen® LCN 287 is a nonionic emulsifier for industrial applications. It is used as emulsifier for emulsion polymerization of vinyl acetate, styrene and acrylate homo- and copolymers together with anionic surfactants like Emulsogen® EPA 073. Emulsogen® LCN 287 improves the shear, temperature and electrolyte stability of polymer dispersions. It is used as a dispersing agent for inorganic and organic pigments in aqueous pigment preparations. Emulsogen® LCN 287 is used for aqueous paints and coatings as a dispersing agent and stabilizer to improve the compatibility of pigments with polymers. It prevents skinning of aqueous coatings e.g. in textile coaitngs with emulsion polymers. This product is also used as an emulsifier for aqueous emulsions of alkyd resins. view less | |
| Emulsogen® LCN 407 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 407 is a nonionic emulsifier for industrial applications. This clear liquid to white pasty product is ready biodegradable and containsno additional biocides. Emulsogen® LCN 407 is used as an emulsifier for emulsion polymerization improving ...view more Emulsogen® LCN 407 is a nonionic emulsifier for industrial applications. This clear liquid to white pasty product is ready biodegradable and containsno additional biocides. Emulsogen® LCN 407 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. It is also used as a dispersing agent for emulsion paints to improve the scrub resistance. Emulsogen® LCN 407 can be diluted with water at room temperature without forming a strong gel phase. view less | |
| Emulsogen® PF 20 S | Clariant - Coatings & Construction Chemicals | Emulsogen® PF 20 S is an emulsifier for emulsion polymerization. This yellowish brown liquid is composed of polyalkylene glycol ether sulfate, ammonium salt. Emulsogen® PF 20 S is resistant to water hardness salts and to acids and alkalis in the concentra...view more Emulsogen® PF 20 S is an emulsifier for emulsion polymerization. This yellowish brown liquid is composed of polyalkylene glycol ether sulfate, ammonium salt. Emulsogen® PF 20 S is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. It can be used in combination with other nonionic and anionic surfactants. Emulsogen® PF 20 S is used as an emulsifier in emulsion polymerization, particularly in the manufacture of acrylate and styrene / acrylate dispersions. view less | |
| Emulsogen® SF 8 | Clariant - Coatings & Construction Chemicals | Emulsogen® SF 8 is an anionic emulsifier and wetting agent. This cloudy liquid is composed of sodium di(2-ethylhexyl) sulfosuccinate in water. It can be used as a wetting agent for emulsion polymers, e.g. SBLatex for carpet coating. Emulsogen® SF 8 can al...view more Emulsogen® SF 8 is an anionic emulsifier and wetting agent. This cloudy liquid is composed of sodium di(2-ethylhexyl) sulfosuccinate in water. It can be used as a wetting agent for emulsion polymers, e.g. SBLatex for carpet coating. Emulsogen® SF 8 can also be used as a cake dewatering aide and as a wetting agent for aqueous, VOC-free paints and coatings. view less | |
| Emulsogen® TS 160 | Clariant - Coatings & Construction Chemicals | Emulsogen® TS 160 is a nonionic wetting and dispersing agent. It has a HLB value of about 13 and is used for aqueous pigment dispersions, preparations, paints and coatings. Emulsogen® TS 160 is suitable for organic pigments and carbon black to produce st...view more Emulsogen® TS 160 is a nonionic wetting and dispersing agent. It has a HLB value of about 13 and is used for aqueous pigment dispersions, preparations, paints and coatings. Emulsogen® TS 160 is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents and with low viscosities. Emulsogen® TS 160 improves the compatibility of pigments and minerals with polymers and binders. It also improves the shelf life and stability of emulsion paints. This product is free of any additional biocide. view less | |
| Emulsogen® TS 200 | Clariant - Coatings & Construction Chemicals | Emulsogen® TS 200 is a nonionic dispersing agent and emulsifier. It is is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. Emulsogen® TS 200 improves the compatibility of pigment...view more Emulsogen® TS 200 is a nonionic dispersing agent and emulsifier. It is is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. Emulsogen® TS 200 improves the compatibility of pigments and minerals with polymers and binders. It also improves shelf life and stability of emulsion paints. view less | |
| Emulsogen® TS 600 | Clariant - Coatings & Construction Chemicals | Emulsogen® TS 600 is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. This yellowish wax is free of any additional biocide, and it is suitable for organic pigments and carbon black to produce stable, ...view more Emulsogen® TS 600 is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. This yellowish wax is free of any additional biocide, and it is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. Emulsogen® TS 600 improves the compatibility of pigments and minerals with polymers and binders. It prevents skinning of emulsion polymers in paints and improves the shelf life and stability of emulsion paints. view less | |
| EPS® 2103 | EPS Materials | EPS® 2103 is an excellent choice to use as a modifier/additive for cementitious base coats and as the binder for finish coats for EIFS (exterior insulated finishing system) applications. For concrete admixture applications, EPS® 2103 imparts increased fle...view more EPS® 2103 is an excellent choice to use as a modifier/additive for cementitious base coats and as the binder for finish coats for EIFS (exterior insulated finishing system) applications. For concrete admixture applications, EPS® 2103 imparts increased flexibility and decreased permeability to the system. view less | Request Sample |
| EPS® 2121 | EPS Materials | EPS® 2121 is an all acrylic latex general purpose pressure sensitive adhesive for removable applications. EPS® 2121 exhibits low peel, moderate tack, and high shear values. | Request Sample |
| EPS® 2127 | EPS Materials | EPS® 2127 is a high solids acrylic copolymer emulsion for label pressure sensitive adhesive applications. It exhibits an excellent balance of adhesive properties and can be used in both tackified and non-tackified adhesive formulations. | Request Sample |
| EPS® 2128 | EPS Materials | EPS® 2128 is an acrylic emulsion for use in removable pressure sensitive applications. EPS® 2128 exhibits low peel, low tack, and high shear values. | Request Sample |
| EPS® 2133 | EPS Materials | EPS® 2133 is an all-acrylic polymer made without APEO surfactants that can be formulated for permanent and removable pressure-sensitive adhesive applications. This product can also be used in formulating plasticizer-free pigmented caulks and film-to-film ...view more EPS® 2133 is an all-acrylic polymer made without APEO surfactants that can be formulated for permanent and removable pressure-sensitive adhesive applications. This product can also be used in formulating plasticizer-free pigmented caulks and film-to-film lamination. Typical values below are for the neat polymer. This polymer is not FDA-approved. view less | Request Sample |
| EPS® 2157 | EPS Materials | EPS® 2157 is an all-acrylic polymer emulsion for use in removable pressure sensitive adhesive applications. EPS® 2157 exhibits moderate peel and tack with high shear values. It also exhibits a “soft” peel as compared to other products with equivalent peel...view more EPS® 2157 is an all-acrylic polymer emulsion for use in removable pressure sensitive adhesive applications. EPS® 2157 exhibits moderate peel and tack with high shear values. It also exhibits a “soft” peel as compared to other products with equivalent peel and tack that have a harder “zip-like” peel. view less | Request Sample |
| New! EPS® 2210 | EPS Materials | EPS® 2210 is an all-acrylic emulsion designed for use in elastomeric roof and wall coatings. Coatings formulated with EPS® 2210 are capable of conforming to ASTM D6083 Type II standards while still providing excellent asphalt bleed-through and dirt pickup...view more EPS® 2210 is an all-acrylic emulsion designed for use in elastomeric roof and wall coatings. Coatings formulated with EPS® 2210 are capable of conforming to ASTM D6083 Type II standards while still providing excellent asphalt bleed-through and dirt pickup resistance. view less | Request Sample |
| EPS® 2224 | EPS Materials | EPS® 2224 is an acrylic emulsion offering excellent alkali and water resistance, dirt pick-up resistance and flexibility. EPS® 2224 can be used in sloped roof formulations which, when properly formulated with EPS® 9147, meet ASTM D6083 specifications. It ...view more EPS® 2224 is an acrylic emulsion offering excellent alkali and water resistance, dirt pick-up resistance and flexibility. EPS® 2224 can be used in sloped roof formulations which, when properly formulated with EPS® 9147, meet ASTM D6083 specifications. It is also an excellent choice for both clear and pigmented caulk and sealant formulations that meet ASTM C834 specifications. view less | Request Sample |
| EPS® 2252 | EPS Materials | EPS® 2252 is a high solids acrylic emulsion designed to adhere to low energy substrates commonly used in roofing. Basecoats and primers based on EPS® 2252 offer outstanding adhesion to thermoplastic olefin (TPO) and ethylene propylene diene monomer (EPDM)...view more EPS® 2252 is a high solids acrylic emulsion designed to adhere to low energy substrates commonly used in roofing. Basecoats and primers based on EPS® 2252 offer outstanding adhesion to thermoplastic olefin (TPO) and ethylene propylene diene monomer (EPDM) rubber. EPS® 2252 provides the capability to formulate coatings at <50g/L VOC. view less | Request Sample |
| EPS® 2257 | EPS Materials | EPS® 2257 is an all-acrylic emulsion offering excellent penetration, adhesion and water resistance on cementitious substrates. The gloss increases with multiple applications. Other benefits with use are low VOC / low odor, low coalescing solvent demand, g...view more EPS® 2257 is an all-acrylic emulsion offering excellent penetration, adhesion and water resistance on cementitious substrates. The gloss increases with multiple applications. Other benefits with use are low VOC / low odor, low coalescing solvent demand, good water resistance, the small particle size polymer offers excellent penetration and appearance properties, good blush resistance, also a freeze-thaw stable polymer and concrete sealer formulation, and allows fast hardness development and excellent UV resistance and non-yellowing. This product has no APEO containing raw materials view less | Request Sample |
| EPS® 2272 | EPS Materials | EPS® 2272 is a styrenated acrylic emulsion offering excellent water retention properties. It can be formulated to meet the requirements of ASTM C-309 and ASTM C-1315 Type I class C cure and seal membranes. It has xcellent water retention properties, low o...view more EPS® 2272 is a styrenated acrylic emulsion offering excellent water retention properties. It can be formulated to meet the requirements of ASTM C-309 and ASTM C-1315 Type I class C cure and seal membranes. It has xcellent water retention properties, low odor, good blush resistance, excellent water resistance, low VOC formulations (< 100 g/l VOC) due to low coalescent demand, ASTM C-1315 Type I Class A, non-yellowing and can be achieved with a suitable UV additive package. This product has no APEO containing raw materials. view less | Request Sample |
| EPS® 2293 | EPS Materials | EPS® 2293 is a self-crosslinking all-acrylic emulsion offering adhesion and early water resistance for use in clear sealers over tiles and cementitious substrates. By using this product clear coatings can be formulated less than 100g/l VOC. It has excelle...view more EPS® 2293 is a self-crosslinking all-acrylic emulsion offering adhesion and early water resistance for use in clear sealers over tiles and cementitious substrates. By using this product clear coatings can be formulated less than 100g/l VOC. It has excellent early water resistance–no blushing, whitening or blistering, excellent gloss development and gloss retention, wet and dry adhesion to tiles, glass and cementitious substrates, low temperature film formation (10 mils at 38°F), and chemical resistance as well as abrasion resistance. It is also VOC compliant (< 100 g/l clear formulations and <50 g/l pigmented formulations) with freeze-thaw stability and has no APEO containing raw materials. view less | Request Sample |
| EPS® 2420 | EPS Materials | EPS® 2420 is a self-crosslinking all-acrylic binder for interior and exterior wood applications such as multi-coat, enamels, and varnishes with exceptional leveling properties and UV resistance. In-can transparency is a key feature of this product. | Request Sample |
| EPS® 2426 | EPS Materials | EPS® 2426 is a styrenated acrylic emulsion offering excellent early water resistance when used as a wood edge sealer. | Request Sample |
| EPS® 2436 | EPS Materials | EPS® 2436 is a self-crosslinking all-acrylic dispersion used as a binder for high-quality wood coatings. It has exceptional transparency and wood wetting (grain accentuation), as well as excellent chemical resistance and mechanical properties. Common ap...view more EPS® 2436 is a self-crosslinking all-acrylic dispersion used as a binder for high-quality wood coatings. It has exceptional transparency and wood wetting (grain accentuation), as well as excellent chemical resistance and mechanical properties. Common applications include primers, topcoats, and self-sealers. view less | Request Sample |
| EPS® 2452 | EPS Materials | EPS® 2452 is used as the principal vehicle for white pigmented high-performance furniture and wood finishes where IKEA R2 (coffee and ethanol resistance) performance is necessary. | Request Sample |
| EPS® 2454 | EPS Materials | EPS® 2454 is used as the principal vehicle for primers and self-sealers when high clarity, excellent penetration, and minimal grain raising is a must. The product has been specifically developed for oak to avoid undesired discoloration. | Request Sample |
| EPS® 2458 | EPS Materials | EPS® 2458 is a water-based, self-crosslinking all-acrylic binder for interior and exterior applications with very good in-can transparency and block resistance. | Request Sample |
| EPS® 2512 | EPS Materials | EPS® 2512 is a styrenated acrylic emulsion offering alkyd-like gloss, corrosion and chemical resistance, as well as excellent early water and humidity resistance. EPS 2512 provides the capability to formulate coatings well below 100 grams/liter VOC. Benef...view more EPS® 2512 is a styrenated acrylic emulsion offering alkyd-like gloss, corrosion and chemical resistance, as well as excellent early water and humidity resistance. EPS 2512 provides the capability to formulate coatings well below 100 grams/liter VOC. Benefits of this product include, alkyd-like gloss and depth of image (DOI), excellent corrosion and light chemical resistance, early water resistance and blush resistance, early adhesion to a variety of ferrous and non-ferrous substrates, including CRS, aluminum, and galvanized substrates. It also has excellent shear stability, and can be used without detriment in pigment grinding phase of formulas, has outstanding dirt pick up resistance and is free of Alkyl Phenol Ethoxylate (APE). view less | Request Sample |
| EPS® 2513 | EPS Materials | EPS® 2513 is a styrenated acrylic emulsion offering excellent corrosion resistance, adhesion and early water resistance. EPS® 2513 provides paint formulators the capability to achieve these properties at less than 100 grams/liter VOC. | Request Sample |
| EPS® 2526 | EPS Materials | EPS® 2526 is a styrenated acrylic emulsion offering excellent hardness and wet/dry film clarity. It is well suited for use in clear and pigmented finishes on cementitious substrates. It has excellent wet film clarity, dry film clarity and blush resistance...view more EPS® 2526 is a styrenated acrylic emulsion offering excellent hardness and wet/dry film clarity. It is well suited for use in clear and pigmented finishes on cementitious substrates. It has excellent wet film clarity, dry film clarity and blush resistance, hardness development and block resistance, resistance to yellowing, chemical resistance, ‘hot tire’ resistance, and has a high gloss characteristic. view less | Request Sample |
| EPS® 2533 | EPS Materials | EPS® 2533 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. It provides paint formulators a low VOC waterborne alternative to solvent-based primers and is ideal for use as ...view more EPS® 2533 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. It provides paint formulators a low VOC waterborne alternative to solvent-based primers and is ideal for use as a universal primer or low gloss topcoat on ferrous and non-ferrous metal, cementitious, wood and plastic substrates. view less | Request Sample |
| EPS® 2535 | EPS Materials | EPS® 2535 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development/gloss retention. It provides a low VOC, waterborne alternative to alkyd maintenance vehicles and general prod...view more EPS® 2535 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development/gloss retention. It provides a low VOC, waterborne alternative to alkyd maintenance vehicles and general product finishes on various substrates. view less | Request Sample |
| EPS® 2538 | EPS Materials | EPS® 2538 is a styrenated acrylic emulsion offering excellent hardness and chemical resistance properties. EPS 2538 provides paint formulators a low VOC waterborne alternative to solvent-based finishes on cementitious, wood and plastic substrates. | Request Sample |
| EPS® 2540 | EPS Materials | EPS® 2540 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development/gloss retention. EPS® 2540 provides paint formulators a low VOC waterborne alternative to alkyd maintenance v...view more EPS® 2540 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development/gloss retention. EPS® 2540 provides paint formulators a low VOC waterborne alternative to alkyd maintenance vehicles and general product finishes on ferrous and non-ferrous metal, wood and plastic substrates. view less | Request Sample |
| EPS® 2545 | EPS Materials | EPS® 2545 is an alkali strippable, styrenated acrylic dispersion offering excellent early water resistance. The very small particle size and ability to re-solubilize itself also makes EPS® 2545 an ideal vehicle for interior wood wiping stains. | Request Sample |
| EPS® 2550 | EPS Materials | EPS® 2550 is a styrenated acrylic emulsion which can be used to formulate economical coatings offering excellent hardness, gloss and chemical resistance. Coatings that are produced with it also exhibit good block resistance and excellent adhesion to plast...view more EPS® 2550 is a styrenated acrylic emulsion which can be used to formulate economical coatings offering excellent hardness, gloss and chemical resistance. Coatings that are produced with it also exhibit good block resistance and excellent adhesion to plastics, ferrous and non-ferrous metals. view less | Request Sample |
| EPS® 2559 | EPS Materials | EPS® 2559 is a styrenated acrylic emulsion offering excellent early water and humidity resistance. It can be formulated with a wide variety of co-solvents and with its excellent shear stability can be used in the grind phase of the formula. The early hydr...view more EPS® 2559 is a styrenated acrylic emulsion offering excellent early water and humidity resistance. It can be formulated with a wide variety of co-solvents and with its excellent shear stability can be used in the grind phase of the formula. The early hydrophobic properties of EPS® 2559 make it an excellent choice for high performance waterproofing paints on cementitious substrates and it can be used as the binder in tile mastics. view less | Request Sample |
| EPS® 2570 | EPS Materials | EPS® 2570 is a self-crosslinking, styrenated acrylic emulsion offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development. This product provides the capability to formulate coatings at <100...view more EPS® 2570 is a self-crosslinking, styrenated acrylic emulsion offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development. This product provides the capability to formulate coatings at <100g/L VOC. view less | Request Sample |
| EPS® 2574 | EPS Materials | EPS® 2574 is a styrenated acrylic emulsion offering excellent hardness, block resistance and early water resistance. EPS® 2574 provides paint formulators a low VOC waterborne alternative to solvent-based resins and is ideal for use on ferrous and non-ferr...view more EPS® 2574 is a styrenated acrylic emulsion offering excellent hardness, block resistance and early water resistance. EPS® 2574 provides paint formulators a low VOC waterborne alternative to solvent-based resins and is ideal for use on ferrous and non-ferrous metals, cementitious, wood and plastic substrates. It has excellent hardness development, block, print and stain resistance, as well as very good corrosion resistance, even without the use of corrosion resistant pigments or additives. view less | Request Sample |
| EPS® 2580 | EPS Materials | EPS® 2580 is a self-crosslinking, styrenated acrylic emulsion polymer for high performance direct-to-metal coatings. Offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development, EPS 2580 pr...view more EPS® 2580 is a self-crosslinking, styrenated acrylic emulsion polymer for high performance direct-to-metal coatings. Offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development, EPS 2580 provides the capability to formulate coatings at <50g/L VOC. view less | Request Sample |
| EPS® 2585 | EPS Materials | EPS® 2585 is a high solids acrylic emulsion for <100g/L VOC direct-to-metal (DTM) applications. Typical performance of EPS 2585 include hardness, flexibility, and corrosion resistance. This polymer can be used for exterior applications as it offers gloss ...view more EPS® 2585 is a high solids acrylic emulsion for <100g/L VOC direct-to-metal (DTM) applications. Typical performance of EPS 2585 include hardness, flexibility, and corrosion resistance. This polymer can be used for exterior applications as it offers gloss retention and adhesion to multiple substrates. view less | Request Sample |
| EPS® 2706 | EPS Materials | EPS® 2706 is a non-APEO all-acrylic film-forming emulsion offering excellent exterior durability and adhesion for use in exterior flat through eggshell finish house paints. It offers advanced dirt resistance technology to improve the brightness and appear...view more EPS® 2706 is a non-APEO all-acrylic film-forming emulsion offering excellent exterior durability and adhesion for use in exterior flat through eggshell finish house paints. It offers advanced dirt resistance technology to improve the brightness and appearance of exterior coatings. view less | Request Sample |
| EPS® 2708 | EPS Materials | EPS® 2708 is an all-acrylic emulsion designed for high alkali applications. It can be used as a polymer admixture for cement-based products, and as a binder/primer for coatings over cementitious substrates. | Request Sample |
| EPS® 2719 | EPS Materials | EPS® 2719 is an all-acrylic emulsion designed to eliminate asphalt bleed through in cool roof coatings while maintaining flexibility and toughness. Roof coatings based on EPS® 2719 offer UV and dirt pick-up resistance and excellent adhesion. | Request Sample |
| EPS® 2720 | EPS Materials | EPS® 2720 is a 100% acrylic film forming polymer based on Self-Crosslinking Technology which makes it an excellent choice for high performance gloss interior and exterior architectural coatings. EPS 2720 is a versatile polymer recommended for use in high ...view more EPS® 2720 is a 100% acrylic film forming polymer based on Self-Crosslinking Technology which makes it an excellent choice for high performance gloss interior and exterior architectural coatings. EPS 2720 is a versatile polymer recommended for use in high through semi-gloss white to neutral base Architectural DIY and Professional paints. view less | Request Sample |
| EPS® 2741 | EPS Materials | EPS® 2741 is a 100% acrylic film-forming polymer that is an excellent choice for high performance flat through semi-gloss interior and exterior architectural coatings. It is a versatile polymer offering excellent performance when formulated into Architect...view more EPS® 2741 is a 100% acrylic film-forming polymer that is an excellent choice for high performance flat through semi-gloss interior and exterior architectural coatings. It is a versatile polymer offering excellent performance when formulated into Architectural DIY and/or Professional paint formulations. view less | Request Sample |
| EPS® 2786 | EPS Materials | EPS® 2786 is a self-crosslinking all-acrylic film-forming polymer that is an exceptional choice for high-performance gloss interior and exterior architectural DIY or professional paints. EPS® 2786 is a versatile polymer recommended for use in semi-gloss t...view more EPS® 2786 is a self-crosslinking all-acrylic film-forming polymer that is an exceptional choice for high-performance gloss interior and exterior architectural DIY or professional paints. EPS® 2786 is a versatile polymer recommended for use in semi-gloss to high gloss enamels that require exceptional hardness and tack resistance in both white/pastel bases and fully tinted clear/neutral bases. Ideal for institutional, commercial, or other high-traffic areas. EPS® 2786 is formulated without the use of intentionally added fluorosurfactants. view less | Request Sample |
| EPS® 2799 | EPS Materials | EPS® 2799 is a 100% acrylic film-forming polymer that is an excellent choice for high performance gloss interior and exterior architectural coatings. It is a versatile polymer recommended for use in semi-gloss to high gloss enamels that require excellent ...view more EPS® 2799 is a 100% acrylic film-forming polymer that is an excellent choice for high performance gloss interior and exterior architectural coatings. It is a versatile polymer recommended for use in semi-gloss to high gloss enamels that require excellent hardness and tack resistance in both white/pastel bases and fully tinted clear/neutral bases. view less | Request Sample |
| EPS® 2843 | EPS Materials | EPS® 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS® 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for u...view more EPS® 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS® 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for use as a universal primer or low gloss topcoat on ferrous and non-ferrous metal, cementitious, wood and plastic substrates. view less | Request Sample |
| EPS® 4203 | EPS Materials | EPS® 4203 is a self-crosslinking polyurethane dispersion/acrylic polymer with excellent abrasion and stain resistance. Primary end uses are for wood substrates (except for commercial flooring), blending with acrylic emulsions, and plastics where alcohol a...view more EPS® 4203 is a self-crosslinking polyurethane dispersion/acrylic polymer with excellent abrasion and stain resistance. Primary end uses are for wood substrates (except for commercial flooring), blending with acrylic emulsions, and plastics where alcohol and household stain resistance are important. This dispersion does not contain N-methyl pyrrolidone or reportable amounts of TEA. It is also a Prop. 65 compliant dispersion as it does not contain hydrazine. view less | Request Sample |
| EPS® 4216 | EPS Materials | EPS® 4216 is an oxidizable polyurethane dispersion designed to provide fast dry, good finished hardness, and water/humidity resistance. Coatings using EPS® 4216 exhibit excellent adhesion to a variety of substrates, including wood, ferrous and non-ferrous...view more EPS® 4216 is an oxidizable polyurethane dispersion designed to provide fast dry, good finished hardness, and water/humidity resistance. Coatings using EPS® 4216 exhibit excellent adhesion to a variety of substrates, including wood, ferrous and non-ferrous metals, and various plastics. view less | Request Sample |
| EPS® 9147 | EPS Materials | EPS® 9147 is a low VOC coalescent for acrylic emulsions. The amount necessary for proper low temperature coalescence varies with different polymers. It has compatibility with many acrylic emulsions, thorough evaluations to check compatibility and stabilit...view more EPS® 9147 is a low VOC coalescent for acrylic emulsions. The amount necessary for proper low temperature coalescence varies with different polymers. It has compatibility with many acrylic emulsions, thorough evaluations to check compatibility and stability should be preformed. This is a permanent coalescent that remains in the paint film and should not be stored in PVC containers or piping for extended periods of time. view less | Request Sample |
| ExacTint® | EPS Materials | ExacTint® is an in-plant colorant in a modified alkyd vehicle in mineral spirits. It is useful in most conventional alkyd coatings systems for architectural or industrial applications. | Request Sample |
| Forton® VF 774 | EPS Materials | Forton® VF 774 is an all acrylic, co-polymer dispersion specifically formulated for the Glass Fiber Reinforced Concrete (GFRC) production process as well as for concrete and concrete repair products. VF-774 is UV stable and is further formulated to be sta...view more Forton® VF 774 is an all acrylic, co-polymer dispersion specifically formulated for the Glass Fiber Reinforced Concrete (GFRC) production process as well as for concrete and concrete repair products. VF-774 is UV stable and is further formulated to be stable and durable in the high pH Portland cement-based GFRC composite. view less | Request Sample |
| Forton® VF 812 | EPS Materials | Forton® VF 812 is a water based, all acrylic, self cross-linking, co-polymer emulsion which is the basis of the Forton Modified Gypsum system. It can be be used in a wide range of architectural and sculptural applications and when combined with specific a...view more Forton® VF 812 is a water based, all acrylic, self cross-linking, co-polymer emulsion which is the basis of the Forton Modified Gypsum system. It can be be used in a wide range of architectural and sculptural applications and when combined with specific alpha hemi-hydrate gypsums and dry melamine resin, Forton® VF-812 at proper loadings, results in a product suitable for interior and exterior use. view less | Request Sample |
| Genagen® COA | Clariant - Coatings & Construction Chemicals | Genagen® COA is a new non-VOC coalescing agent for the effective reduction of minimal film formation temperature (MFFT) without impacting viscosity. Label-free and for all kinds of paints binders used in diverse decorative coatings applications. | |
| Genamin® BTMS | Clariant - Coatings & Construction Chemicals | Genamin® BTMS is a safe, efficient and widely used conditioning quat. Outstanding performance on hair, such as soft, natural feel and excellent dry combing properties is combined with safe and convenient handling. Genamin® BTMS offers a superb softening e...view more Genamin® BTMS is a safe, efficient and widely used conditioning quat. Outstanding performance on hair, such as soft, natural feel and excellent dry combing properties is combined with safe and convenient handling. Genamin® BTMS offers a superb softening effect for thick and hard to manage hair. It is soluble in aqueous systems, compatible with cationic and amphoteric surfactants, and has excellent stability over wide pH range. view less | |
| Genamin® C 050 | Clariant - Coatings & Construction Chemicals | Genamin® C 050 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 5 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin gr...view more Genamin® C 050 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 5 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® C 100 | Clariant - Coatings & Construction Chemicals | Genamin® C 100 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 10 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grad...view more Genamin® C 100 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 10 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® D 01/2000 | Clariant - Coatings & Construction Chemicals | Genamin® D 01/2000 is a diamine based on polypropylene glycol with an average molecular mass of 2000 g/mol. Genamin® D 01/2000 contains terminal primary amine groups which can undergo all typical amine reactions. | |
| Genamin® M 41/2000 | Clariant - Coatings & Construction Chemicals | Genamin® M 41/2000 is an amine based on a statistical polyethylene/polypropylene glycol co polymer with an average molecular mass of 2000 g/mol. This product is also available as Genamin® M 41/2000 Terra, providing the same performance as its conventio...view more Genamin® M 41/2000 is an amine based on a statistical polyethylene/polypropylene glycol co polymer with an average molecular mass of 2000 g/mol. This product is also available as Genamin® M 41/2000 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 72.8%. view less | |
| Genamin® O 020 Special | Clariant - Coatings & Construction Chemicals | Genamin® O 020 Special is a surfactant for the chemical industry. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic...view more Genamin® O 020 Special is a surfactant for the chemical industry. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® O 200 | Clariant - Coatings & Construction Chemicals | Genamin® O 200 is a surfactant for the chemical-technological industry. This product is a yellowish to brownish clear liquid. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic...view more Genamin® O 200 is a surfactant for the chemical-technological industry. This product is a yellowish to brownish clear liquid. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genapol® ED 3060 | Clariant - Coatings & Construction Chemicals | Genapol® ED 3060 is a low-foaming wetting and dispersing agent for aqueous paints and coatings. This yellowish liquid improves the compatibility of pigments and minerals with polymers and binders in aqueous coatings and improves the color strength of orga...view more Genapol® ED 3060 is a low-foaming wetting and dispersing agent for aqueous paints and coatings. This yellowish liquid improves the compatibility of pigments and minerals with polymers and binders in aqueous coatings and improves the color strength of organic pigments like phthalocyanine blue or red and yellow azo pigments. view less | |
| Genapol® LA 070 | Clariant - Coatings & Construction Chemicals | Genapol® LA 070 is a liquid fatty alcohol polyglycol ether used as an emulsifier, solubilizer, fat dispersant, dissolving agent, and thickener for anionic liquid formulations. | |
| Genapol® O 080 | Clariant - Coatings & Construction Chemicals | Genapol® O 080 is a liquid to pasty fatty alcohol polyglycol ether non-ionic surfactant for the detergent industry. Applications include wetting agents, dispersing agents, special cleaning agents, industrial cleaning agents, and emulsifiers. | |
| Genapol® O 100 | Clariant - Coatings & Construction Chemicals | Genapol® O 100 is a pasty fatty alcohol polyglycol ether nonionic surfactant for the detergent industry. Applications include wetting agents, dispersing agents, special cleaning agents, industrial cleaning agents, and emulsifiers. | |
| Genapol® PF 20 | Clariant - Coatings & Construction Chemicals | Genapol® PF 20 is a low foaming, nonionic surfactant and defoamer for use in detergents and cleaning agents. It is also used as a low foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. This product...view more Genapol® PF 20 is a low foaming, nonionic surfactant and defoamer for use in detergents and cleaning agents. It is also used as a low foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. This product is a slightly cloudy, colorless liquid that is composed of block copolymer of propylene oxide and ethylene oxide, containing 20% w/w ethylene oxide. Genapol® PF 20 has good wetting and dispersing action coupled with low foaming tendency. Within the Genapol® PF series, the products with a lower degree of ethoxylation have a better foam-suppressing effect than the products with a higher degree of ethoxylation. Typical applications include rinsing aids, detergents for dishwashers and bottle-rinsing machines and industrial cleaning formulations. view less |
