| UCECOAT® 7655 | Allnex | UCECOAT® 7655 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. Developed for high end wooden furniture top coats, both transparent and pigmented, it can be used for other applications and substrate...view more UCECOAT® 7655 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. Developed for high end wooden furniture top coats, both transparent and pigmented, it can be used for other applications and substrates. view less | Request Sample |
| EPS® 2272 | EPS Materials | EPS® 2272 is a styrenated acrylic emulsion offering excellent water retention properties. It can be formulated to meet the requirements of ASTM C-309 and ASTM C-1315 Type I class C cure and seal membranes. It has xcellent water retention properties, low o...view more EPS® 2272 is a styrenated acrylic emulsion offering excellent water retention properties. It can be formulated to meet the requirements of ASTM C-309 and ASTM C-1315 Type I class C cure and seal membranes. It has xcellent water retention properties, low odor, good blush resistance, excellent water resistance, low VOC formulations (< 100 g/l VOC) due to low coalescent demand, ASTM C-1315 Type I Class A, non-yellowing and can be achieved with a suitable UV additive package. This product has no APEO containing raw materials. view less | Request Sample |
| Performax™ 4363 | Lubrizol Advanced Materials, Inc. | Performax™ 4363 is a tough, high performance, waterborne compound that provides an excellent balance of hardness, abrasion resistance, and flexibility. This ready-to-use urethane based compound forms a soft, flexible film which has excellent adhesion to a...view more Performax™ 4363 is a tough, high performance, waterborne compound that provides an excellent balance of hardness, abrasion resistance, and flexibility. This ready-to-use urethane based compound forms a soft, flexible film which has excellent adhesion to a variety of substrates including cotton, polyester, nylon and their blends. Performax™ 4363 can be applied using all traditional techniques such as knife coating and Meyer rod applicators. Patterned effects can also be achieved with this compound using rotary screen, gravure, or hand applied stencils and screens. Performax™ 4363 can be used as a sole component or it can be used as a top coating to add functionality to other coatings. Depending on the performance needs, single or multiple coats of the compound can be applied to achieve the desired level of performance. Suggested drying temperatures are 250ºF-300ºF, and a curing temperature of 325ºF-350ºF for best wash durability. A fluoro chemical water repellent finish can be applied after the Performax™ coating for improved performance and durability. view less | |
| L-3410 | Chan Sieh Enterprises Co, Ltd. | L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wo...view more L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wood, parquet, overprint varnishes, and inks. view less | |
| Harcryl® 1228 M UV | Harcros Chemicals, Inc. | Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mo...view more Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M UV more hydrophilic than Harcryl® 1228. Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M UV to be easily incorporated into many coating systems. including UV & Radiation curable coatings. view less | |
| Deuteron PMH-M | P.A.T. Products | Deuteron PMH-M can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free and radiation curing varnishes with the additional use of SiO2. With its favorable oil absorpt...view more Deuteron PMH-M can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free and radiation curing varnishes with the additional use of SiO2. With its favorable oil absorption value the product is predestinated for coatings with high flexibility, e.g. coil coatings and leather finishes. view less | Request Sample |
| Deuteron PMH-F | P.A.T. Products | Deuteron PMH-F can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free and radiation curing varnishes with the additional use of SiO2. With its favorable oil absorpt...view more Deuteron PMH-F can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free and radiation curing varnishes with the additional use of SiO2. With its favorable oil absorption value the product is predestinated for coatings with high flexibility, e.g. coil coatings and leather finishes. view less | Request Sample |
| Deuteron MK Matting Agent | P.A.T. Products | Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV ...view more Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. view less | Request Sample |
| Silmer®ACR D208 | Siltech Corp. | Silmer®ACR D208 is a water-soluble multi-functional silicone acrylate pre-polymer. It has a specific gravity of 1.07 and a viscosity of 300 - 1000. Silmer®ACR D208 is used as an additive in UV curing systems as well as to modify acrylate polymers to impro...view more Silmer®ACR D208 is a water-soluble multi-functional silicone acrylate pre-polymer. It has a specific gravity of 1.07 and a viscosity of 300 - 1000. Silmer®ACR D208 is used as an additive in UV curing systems as well as to modify acrylate polymers to improve surface and physical properties. view less | |
| ALBIDUR® PU 5640 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good prese...view more ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good preservation of network density and no change in mechanical properties. ALBIDUR® PU 5640 has reduced cure shrinkage, improved dirt shedding, and barrier properties against water and diluted acids. view less | Request Sample |
| CYMEL® 1172 | Allnex | CYMEL® 1172 resin is an unalkylated glycoluril crosslinker supplied in water at 45% solids. It is designed to be used for crosslinking aqueous neutral or acidic hydroxyl or amide functional polymers and combines excellent stability at acidic pH with excel...view more CYMEL® 1172 resin is an unalkylated glycoluril crosslinker supplied in water at 45% solids. It is designed to be used for crosslinking aqueous neutral or acidic hydroxyl or amide functional polymers and combines excellent stability at acidic pH with excellent reactivity. It cannot be used in amine neutralized or basic coating systems because of the potential problems of demethylolation of the compound and a significant decrease in cure response. view less | Request Sample |
| SPUR+ 1012 prepolymer | Momentive | SPUR+ 1012 prepolymer is a silylated prepolymer that does not rely on an isocyanate curing reactions. Additionally, it is formulated without the use of phthalate-based plasticizers, and in sealant formulations, using it as the base resin or in combination with SPUR+ 1015 prepolymer, extremely low modulus values can be attained. This moisture curable...view more SPUR+ 1012 prepolymer is a silylated prepolymer that does not rely on an isocyanate curing reactions. Additionally, it is formulated without the use of phthalate-based plasticizers, and in sealant formulations, using it as the base resin or in combination with SPUR+ 1015 prepolymer, extremely low modulus values can be attained. This moisture curable resin is an excellent candidate to consider in formulating construction sealants requiring rapid cure, good water resistance, high flexibility and adhesion to most construction substrate materials such as concrete, marble and glass. view less | |
| Silmer®ACR Di-1508 | Siltech Corp. | Silmer®ACR Di-1508 is a water-dispersable di-functional silicone acrylate pre-polymer. It has a specific gravity of 1.04 and a viscosity of 750-2,500. Silmer®ACR Di-1508 is used as an additive in UV curing systems as well as to modify acrylate polymers to...view more Silmer®ACR Di-1508 is a water-dispersable di-functional silicone acrylate pre-polymer. It has a specific gravity of 1.04 and a viscosity of 750-2,500. Silmer®ACR Di-1508 is used as an additive in UV curing systems as well as to modify acrylate polymers to improve surface and physical properties. view less | |
| Easaqua™ X D 803 | Vencorex | Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of two-pack waterborne...view more Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal, and plastics. view less | |
| Octocure ZDB-50 CF | Tiarco Chemical | Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and h...view more Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and high modulus. This product can also be used at low doses in noncuring natural and SBR latex compounds as a non-discoloring antioxidant. view less | |
| TEGO® Rad 2200 N | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2200 N is a clear to slightly hazy liquid radiation-curing substrate wetting, flow, glide, and slip additive. It is a silicone polyether acrylate that is radically crosslinkable and highly compatible. It is ideal for radiation-curing, pigmented, and clear coat as well as aqueous UV ...view more TEGO® Rad 2200 N is a clear to slightly hazy liquid radiation-curing substrate wetting, flow, glide, and slip additive. It is a silicone polyether acrylate that is radically crosslinkable and highly compatible. It is ideal for radiation-curing, pigmented, and clear coat as well as aqueous UV systems. TEGO® Rad 2200 N can be used in the topcoat of lacquer coats. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2200 N. view less | Request Sample |
| LYNDCOAT BR 1102 | Elkem Silicones | LYNDCOAT BR1102 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1102 RTU replaces the c...view more LYNDCOAT BR1102 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1102 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR1102 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. Lyndcoat™ BR1102 RTU is of medium viscosity and does not contain mica. view less | |
| Gasil® HP380 | PQ Corporation | Gasil® HP380 is a new PQ matting agent specially designed for the effective gloss reduction of Wood and Plastic Coatings. Formulations based on resins dissolved in organic solvents, dispersed in water or UV curable are all used in this sector depending on...view more Gasil® HP380 is a new PQ matting agent specially designed for the effective gloss reduction of Wood and Plastic Coatings. Formulations based on resins dissolved in organic solvents, dispersed in water or UV curable are all used in this sector depending on the performance requirements of the final coated component, its cost and the local legislation. Gasil® HP380 has displayed excellent weight effectiveness in most systems in which it has been tested. view less | |
| Polyol 3165 | Perstorp | Polyol 3165 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a molecular weight of 1010g/mole and is also used as a component for waterborne...view more Polyol 3165 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a molecular weight of 1010g/mole and is also used as a component for waterborne polymers, and can be used in paint additives. view less | |
| Polyol 3165 | Univar Solutions | Polyol 3165 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a molecular weight of 1010g/mole and is also used as a component for waterborne...view more Polyol 3165 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a molecular weight of 1010g/mole and is also used as a component for waterborne polymers, and can be used in paint additives. view less | Request Sample |
| CN9030 | Sartomer Americas | CN9030 is a urethane acrylate oligomer designed to produce tough, weather resistant UV/EB-cure coatings. The new oligomer offers enhanced chemical and water resistance and excellent adhesion to PMMA, polycarbonate, PET, wood, and metal substrates. | |
| CYMEL® 1123 | Allnex | CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion and film flexibility, especially after several cure cycles, makes it particularly well suited for can coating applications. While it is insoluble in water, this product shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne...view more CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion and film flexibility, especially after several cure cycles, makes it particularly well suited for can coating applications. While it is insoluble in water, this product shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. view less | Request Sample |
| EBECRYL® LEO 10601 | Allnex | EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. It exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink- water balance and low misting. It may also ...view more EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. It exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink- water balance and low misting. It may also be used to produce UV flexo inks with good flow, high gloss and high reactivity. It is also suitable for screen and gravure application and OPV. view less | Request Sample |
| UCECOAT® 2805 | Allnex | UCECOAT® 2805 is a low viscosity, high performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO-free. It is also non-irritant for skin and eyes. It i...view more UCECOAT® 2805 is a low viscosity, high performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO-free. It is also non-irritant for skin and eyes. It is characterized by an extremely low mean particle size associated with a low viscosity and an outstanding colloidal stability alone or in the presence of pigments. It is tack-free and water redispersible after water evaporation but before cure. Its polymer composition was optimized for good coating performance and low migration potential after cure. view less | Request Sample |
| SETALUX® 17-1608 | Allnex | SETALUX® 17-1608 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt sp...view more SETALUX® 17-1608 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt spray, water soak and humidity. Based on accelerated weathering tests, exterior durability is excellent. view less | Request Sample |
| SETALUX® 17-1609 | Allnex | SETALUX® 17-1609 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt sp...view more SETALUX® 17-1609 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt spray, water soak and humidity. Based on accelerated weathering tests, exterior durability is excellent. view less | Request Sample |
| SETALUX® 17-1611 | Allnex | SETALUX 17-1611 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt spr...view more SETALUX 17-1611 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt spray, water soak and humidity. Based on accelerated weathering tests, exterior durability is excellent. view less | Request Sample |
| Gasil® IJ37 | PQ Corporation | Gasil® IJ37 is an organically treated silica gel specifically designed as a effective matting agent for water based wood flooring and radiation cured coatings. It provides excellent matting efficiency combined with minimal effect on clarity and mechanical...view more Gasil® IJ37 is an organically treated silica gel specifically designed as a effective matting agent for water based wood flooring and radiation cured coatings. It provides excellent matting efficiency combined with minimal effect on clarity and mechanical film properties. view less | |
| CN2264 | Sartomer Americas | CN2264 is a low color, polyester acrylate oligomer which has a fast cure response. This product has good hardness, high abrasion resistance, as well as good heat, chemical, and water resistance. CN2264 is developed for UV/EB-curable coatings and inks, esp...view more CN2264 is a low color, polyester acrylate oligomer which has a fast cure response. This product has good hardness, high abrasion resistance, as well as good heat, chemical, and water resistance. CN2264 is developed for UV/EB-curable coatings and inks, especially where hardness and abrasion resistance are required, specifically for wood, paper, and flooring coatings and screen, inkjet, and flexo inks. view less | |
| Desmodur® N 3400 | Covestro | Desmodur® N 3400 is a solvent free low viscosity aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Can be used as a hardener or reactive diluent for 100% solids, solvent-borne and aqueous, two-pack polyurethane coatings. Depending ...view more Desmodur® N 3400 is a solvent free low viscosity aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Can be used as a hardener or reactive diluent for 100% solids, solvent-borne and aqueous, two-pack polyurethane coatings. Depending on the polyol used, the coatings yield tough but flexible films that can be either soft or extremely hard, have good resistance to chemicals and solvents, good weather stability and good resistance to abrasion. view less | |
| UCECOAT® 2807 | Allnex | UCECOAT® 2807 is a low-viscous high-performance energy curable polyurethane dispersion potentially suitable for indirect food contact applications if used in an optimized formulation and proper curing conditions are applied. Please contact us for more det...view more UCECOAT® 2807 is a low-viscous high-performance energy curable polyurethane dispersion potentially suitable for indirect food contact applications if used in an optimized formulation and proper curing conditions are applied. Please contact us for more details. The product is solvent-free, tin-free, BPA-free and APEOfree. Based on tests obtained on a structural analogue, it is also non-irritant for skin and eyes. It is characterized by a low mean particle size associated with a low viscosity and an outstanding colloidal stability when used as such or in the presence of pigments and additives. It is tack-free after water evaporation and before cure. Its composition was optimized for good coating performance and low migration after cure. view less | Request Sample |
| SETALUX® D A 160 X | Allnex | SETALUX® D A 160 X is an acrylic polyol with 2.7% OH (calculated on non-volaties) which is used in combination with aliphatic polyisocyanates based on hexamethylene diisocyanate to formulate air drying curing and forced drying coatings with good weather s...view more SETALUX® D A 160 X is an acrylic polyol with 2.7% OH (calculated on non-volaties) which is used in combination with aliphatic polyisocyanates based on hexamethylene diisocyanate to formulate air drying curing and forced drying coatings with good weather stability and good resistance to water, washing solutions and chemicals. view less | Request Sample |
| JONCRYL® 2561 | BASF Dispersions & Resins | JONCRYL 2561 is an unique acrylic latex developed for interior and exterior high gloss architectural coatings. As an RC emulsion, it provides alkyd-like rheology, gloss, and pigment dispersing capabilities, while maintaining the excellent exterior durability and resistance properties of acrylics. JONCRYL 2561 is recommended for interior/exterior waterborne...view more JONCRYL 2561 is an unique acrylic latex developed for interior and exterior high gloss architectural coatings. As an RC emulsion, it provides alkyd-like rheology, gloss, and pigment dispersing capabilities, while maintaining the excellent exterior durability and resistance properties of acrylics. JONCRYL 2561 is recommended for interior/exterior waterborne wood coatings for furniture or millwork applications. view less | |
| PEL-SIL CL380 | Ele Corporation | PEL-SIL CL380 is a linear, 100% active, PEG-10 siloxane polyether. It is an excellent flow and leveling agent for both waterborne and solventborne coatings. It also provides slip and mar resistance as well as anti-blocking properties. For UV/EB cure coati...view more PEL-SIL CL380 is a linear, 100% active, PEG-10 siloxane polyether. It is an excellent flow and leveling agent for both waterborne and solventborne coatings. It also provides slip and mar resistance as well as anti-blocking properties. For UV/EB cure coatings, PEL-SIL CL380 can reduce coefficient of friction reduction without generating foams or lowering gloss. It may also be incorporated into polymer systems by virtue of its two primary hydroxyl in polyurethane systems. view less | |
| BECKOCURE™ EH 2260w/41WA | Allnex | BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corr...view more BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. This product shows excellent application behavior and very robust performance even on poorly prepared surfaces. view less | Request Sample |
| UCECOAT® 7850 | Allnex | UCECOAT® 7850 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. It was developed for wood coatings, but can also be used for other applications. Because of its non-irritant nature and low viscosity,...view more UCECOAT® 7850 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. It was developed for wood coatings, but can also be used for other applications. Because of its non-irritant nature and low viscosity, it and can be applied safely by spray coating and curtain coating. view less | Request Sample |
| PanTINT® 90N1504 | Pan Technology Inc. | PanTINT® 90N1504 is a transparent brown oxide pigment with the color index number PR101 and is a part of the PanTINT® 90 Product Series. It is based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable vis...view more PanTINT® 90N1504 is a transparent brown oxide pigment with the color index number PR101 and is a part of the PanTINT® 90 Product Series. It is based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. It has little to no effect on gloss, cure time, resistance to water spotting, or exterior durability. It can be used for both tinting and mass tone applications in most aqueous ambient cured and baking finishes including pressure sensitive adhesives, latex, as well as architectural, aerospace, and maintenance coatings. view less | |
| Easaqua™ M 502 | Vencorex | Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane co...view more Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like metal, plastics, wood, and concrete. Easaqua™ M 502 is also suggested as a crosslinker of paint and varnish formulations with very low VOC. view less | |
| Easaqua™ L 600 | Vencorex | Easaqua™ L 600 is a low viscosity water dispersible aliphatic polyisocyanate. It exhibits several benefits, including optimal balance between low viscosity, high NCO content and emulsification ability; excellent humidity and moisture resistance, and improved adhesion onto a wide range of substrates. This product is a hardener for high performance, light fastening, two-pack waterborne...view more Easaqua™ L 600 is a low viscosity water dispersible aliphatic polyisocyanate. It exhibits several benefits, including optimal balance between low viscosity, high NCO content and emulsification ability; excellent humidity and moisture resistance, and improved adhesion onto a wide range of substrates. This product is a hardener for high performance, light fastening, two-pack waterborne polyurethane coatings. It is recommended for plastic coatings, metal coatings, flooring coatings, and adhesives. view less | |
| TEGO® Dispers 652 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 652 is a solvent- and APE-free pigment-wetting and dispersing additive. It is a clear to slightly hazy liquid concentrate of a fatty acid derivative. This product is for waterborne, solventborne, and radiation-curing formulations. Based on s...view more TEGO® Dispers 652 is a solvent- and APE-free pigment-wetting and dispersing additive. It is a clear to slightly hazy liquid concentrate of a fatty acid derivative. This product is for waterborne, solventborne, and radiation-curing formulations. Based on sustainable raw materials, TEGO® Dispers 652 reduces millbase viscosity and has good color intensity and gloss with inorganic pigments and fillers. This product can also be used for resin-based and resin-free pigment concentrates. view less | Request Sample |
| SETALUX® 17-1015 | Allnex | SETALUX® 17-1015 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt sp...view more SETALUX® 17-1015 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt spray, water soak and humidity. Based on accelerated weathering tests, exterior durability is expected to be excellent. view less | Request Sample |
| DOUBLEMER® R1601L4 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® R1601L4 is a specially designed monomer with low skin irritation, low volatility, low odor, and high refractive index performance, applicable in UV-curing of optical film applications. It is also suitable for coatings, inks and adhesives. This ...view more DOUBLEMER® R1601L4 is a specially designed monomer with low skin irritation, low volatility, low odor, and high refractive index performance, applicable in UV-curing of optical film applications. It is also suitable for coatings, inks and adhesives. This product exhibits good adhesion and hardness, good heat resistance and water resistance and low shrinkage. view less | |
| CN299 | Sartomer Americas | CN299 is a clear to hazy liquid tetrafunctional acrylated polyester oligomer. It features fast cure response, good lithographic behavior, good pigment wetting, and hydrophobic/hydrophilic balance. CN299 is used in UV-curable coatings and inks including me...view more CN299 is a clear to hazy liquid tetrafunctional acrylated polyester oligomer. It features fast cure response, good lithographic behavior, good pigment wetting, and hydrophobic/hydrophilic balance. CN299 is used in UV-curable coatings and inks including metal, plastic, and paper coatings as well as flexographic, screen, and lithographic inks. This product also has good chemical resistance, good heat resistance, high abrasion resistance and good adhesion. view less | |
| UCECOAT® 7630 | Allnex | UCECOAT® 7630 is an energy curable polyurethane dispersion which is tack-free after water evaporation. It has been developed for wood coatings but can also be used for other applications, such as field applied UV curable coatings for wood, concrete, VCT (...view more UCECOAT® 7630 is an energy curable polyurethane dispersion which is tack-free after water evaporation. It has been developed for wood coatings but can also be used for other applications, such as field applied UV curable coatings for wood, concrete, VCT (vinyl composition tile), and resilient floors. Because of its non-irritant nature and low viscosity, it can be applied safely by spray coating and curtain coating. view less | Request Sample |
| K-FLEX® 7301 | King Industries, Inc. | K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It is effective for both high solids and water-based applications for enhancing adhesion and corrosion resistance. This product appears as a clear amber liquid, terminates solvent popping/pinholes, and reduces induction time in epoxy/polyamide coatings. It is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbons. It can be used in 2 component epoxy/ polyamide coatings, isocyanate crosslined coatings, and UV ...view more K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It is effective for both high solids and water-based applications for enhancing adhesion and corrosion resistance. This product appears as a clear amber liquid, terminates solvent popping/pinholes, and reduces induction time in epoxy/polyamide coatings. It is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbons. It can be used in 2 component epoxy/ polyamide coatings, isocyanate crosslined coatings, and UV cure and oxidizing polymerization. view less | |
| Sarbox SB401 | Sartomer Americas | Sarbox SB401 is a highly functional, carboxylic acid and anhydride containing methacrylate oligomer, blended in ethyl-3-ethoxy propionate (EEP) solvent. It offers fast cure speed and excellent copper adhesion. It has a high acid number for alkali strippab...view more Sarbox SB401 is a highly functional, carboxylic acid and anhydride containing methacrylate oligomer, blended in ethyl-3-ethoxy propionate (EEP) solvent. It offers fast cure speed and excellent copper adhesion. It has a high acid number for alkali strippability. Sarbox SB401 also provides good solvent and acid resistance and excellent high gloss aqueous development. Suggested applications of this product include metal, plastic and wood coatings, inks, and solder masks and photoresists for electronics. view less | |
| Deuteron MK-F Matting Agent | P.A.T. Products | Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV ...view more Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. view less | Request Sample |
| Deuteron MK-F6 Matting Agent | P.A.T. Products | Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV ...view more Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. view less | Request Sample |
| SETALUX® 27-1741 | Allnex | SETALUX® 27-1741 is a low VOC hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to...view more SETALUX® 27-1741 is a low VOC hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt spray, water soak and humidity. Based on accelerated weathering tests, exterior durability is expected to be excellent. view less | Request Sample |
| SR494 | Sartomer Americas | SR494 is a heat resistant, fast curing, tetrafunctional monomer for use in UV/EB polymerization. It is a low skin irritation monomer. Performance properties include: adhesion, chemical and water resistance, hardness and abrasion resistance, heat resistanc...view more SR494 is a heat resistant, fast curing, tetrafunctional monomer for use in UV/EB polymerization. It is a low skin irritation monomer. Performance properties include: adhesion, chemical and water resistance, hardness and abrasion resistance, heat resistance, weatherability and impact strength. Suggested applications include: adhesives, chemical intermediates, coatings, electronics, inks, rubber and plastics and sealants. view less | |
| Borchi® Gol LA 2 | Borchers, A Company of OMG | Borchi® Gol LA 2 is a VOC free surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in solvent-based, solvent-free and water-soluble coating systems. This product develops a medium surface tension r...view more Borchi® Gol LA 2 is a VOC free surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in solvent-based, solvent-free and water-soluble coating systems. This product develops a medium surface tension reduction and can be used either for clearcoats or for pigmented coating systems. Borchi® Gol LA 2 is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints like hydroxyl bearing polyacrylates and polyesters, primarily polyester melamine or epoxy systems. It also supports levelling in physically curing finishes based on long-, middle and short chain alkyds and polyacrylates. This product is especially recommended in systems where solvent-free additives or certain solvents are required. To facilitate incorporation ability it may be helpful to dissolve Borchi® Gol LA 2 in solvents glycol-, aliphatic-, aromatic-, or ester-based. view less | |
| BECKOCURE™ EH 2100w/44WA | Allnex | BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...view more BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. view less | Request Sample |
| DOUBLEMER® BPA2EODA | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® BPA2EODA is a di-functional monomer with low skin irritation, low volatility, and low odor, generally for use in UV-curing related applications. It exhibits good adhesion and hardness, good heat resistance and water resistance, low shrinkage an...view more DOUBLEMER® BPA2EODA is a di-functional monomer with low skin irritation, low volatility, and low odor, generally for use in UV-curing related applications. It exhibits good adhesion and hardness, good heat resistance and water resistance, low shrinkage and good chemical resistance. This clear liquid is recommended for the following applications: coatings; inks; adhesives; electronics, photoresists and photopolymers; and electronics, solder masks. view less | |
| UCECOAT® 7230 | Allnex | UCECOAT® 7230 is a UV/EB energy curable polyurethane dispersion with low tack before cure and after water evaporation. It has been developed for high hardness top coats on plastics, wood and other substrates, including both transparent and pigmented. UCEC...view more UCECOAT® 7230 is a UV/EB energy curable polyurethane dispersion with low tack before cure and after water evaporation. It has been developed for high hardness top coats on plastics, wood and other substrates, including both transparent and pigmented. UCECOAT® 7230 demonstrates high reactivity, good compatibility and good colloidal stability. The cured coating exhibits high gloss and very high hardness, abrasion resistance, chemical resistance, as well as good adhesion on plastics. view less | Request Sample |
| TIB KAT® 808 | TIB Chemicals | TIB KAT® 808 is used as a co-catalyst for the curing of unsaturated polyester resins. It can also be used as a polymerisation regulator in cobalt-catalyzed crosslinking reactions. This product is dark green, has a typical solvent-like odor, and is insolub...view more TIB KAT® 808 is used as a co-catalyst for the curing of unsaturated polyester resins. It can also be used as a polymerisation regulator in cobalt-catalyzed crosslinking reactions. This product is dark green, has a typical solvent-like odor, and is insoluble in water. view less | |
| HCR 280 Polyamine | Epoxy Chemicals, Inc. | HCR 280 Polyamine is a high performance PACM based cycloaliphatic curing agent for use with liquid epoxy resins. This product cures at low temperatures and has chemical, water spot, and amine blush resistance. It is phenol free and DOT non-corrosive, and ...view more HCR 280 Polyamine is a high performance PACM based cycloaliphatic curing agent for use with liquid epoxy resins. This product cures at low temperatures and has chemical, water spot, and amine blush resistance. It is phenol free and DOT non-corrosive, and can find application in industrial flooring, high-solids coatings, chemical resistant linings and mortars, and secondary containment linings. view less | |
| LYNDCOAT BR 1100 RTU | Elkem Silicones | LYNDCOAT BR1100 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1100 RTU replaces the c...view more LYNDCOAT BR1100 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1100 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR1100 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. Lyndcoat™ BR1100 RTU is of high viscosity and does not contain mica. For maximum release and bladder life, the use of a durable bladder pre-treatment such as Lyndcoat™ BR2101 RTU is highly recommended. view less | |
| LYNDCOAT BR 1103 RTU | Elkem Silicones | LYNDCOAT BR1103 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR1103 RTU replaces the c...view more LYNDCOAT BR1103 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR1103 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. LYNDCOAT® BR1103 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. LYNDCOAT® BR1103 RTU is of high viscosity and does not contain mica. For maximum release and bladder life, the use of a durable bladder pre-treatment such as LYNDCOAT® BR2201 RTU is highly recommended. view less | |
| Dynoadd® P-540 | Dynoadd by Dynea | Dynoadd® P-540 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-540 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-540 has a particle size of 40 microns.The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | Request Sample |
| BYK®-377 | BYK | BYK®-377 is a polyether modified polydimethylsiloxane. The product improves substrate wetting and leveling at low dosages. In most cases only half the amount of a conventional silicone is needed to optimize substrate wetting, slip and tape release of UV c...view more BYK®-377 is a polyether modified polydimethylsiloxane. The product improves substrate wetting and leveling at low dosages. In most cases only half the amount of a conventional silicone is needed to optimize substrate wetting, slip and tape release of UV curable, 2 pack PU, polyester/melamine and aqueous topcoats. Due to the good compatibility in common binder systems, the production of highly transparent varnishes is possible. Typically it does not cause turbidity in clearcoats. Sanding is required for recoat adhesion. The OH groups of BYK-377 can react with polyisocyanates view less | Request Sample |
| BYK®-CATALYST 450 | BYK | BYK®-CATALYST 450 is an acid catalyst for solvent-borne and aqueous paint systems. It is a solution of an amine salt of para-toluene sulfonic acid. This product accelerates the crosslinking of amino resins with resins containing hydroxyl groups. Especiall...view more BYK®-CATALYST 450 is an acid catalyst for solvent-borne and aqueous paint systems. It is a solution of an amine salt of para-toluene sulfonic acid. This product accelerates the crosslinking of amino resins with resins containing hydroxyl groups. Especially low reactive melamine formaldehyde resins of HMMM-type need an accelerator to lower the curing temperature or to reduce the baking time. In comparison with pure para-toluenesulfonic acid, the product shows considerably lower viscosity increase on storage which can extend shelf life 1,5 - 3 times. The additive allows a 10 to 20°C lower baking temperature compared to other blocked para-TSA catalysts (such as those with morpholine or aminomethylpropanol). view less | Request Sample |
| CHS-Epoxy 200 V 55 | Spolchemie | CHS-Epoxy 200 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a low molecular weighted epoxy resin. It is classified as an epoxy resin for waterborne systems. The primary use for CHS-Epoxy 200 V 55 is to ...view more CHS-Epoxy 200 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a low molecular weighted epoxy resin. It is classified as an epoxy resin for waterborne systems. The primary use for CHS-Epoxy 200 V 55 is to be applied as a varnish and a binder of paints for wood, concrete and metal surfaces in combination with curing agent Telalit 180. view less | |
| HALOX® CW-2230 | ICL Phosphate Specialty | HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in ...view more HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyds and epoxy-esters. Recommended dosage levels range from 9-15% based on total formula weight with PVC levels ranging from 42-47%. It has a shelf life of 36 months. HALOX® CW-2230 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 2. view less | Request Sample |
| EBECRYL® 450 | Allnex | EBECRYL® 450 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 450 provides the proper hydrophilic-lipophilic balance necessary for lithography, combined with hig...view more EBECRYL® 450 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 450 provides the proper hydrophilic-lipophilic balance necessary for lithography, combined with high reactivity when cured by ultraviolet light (UV) or an electron beam (EB). EBECRYL® 450 is recommended for: fast curing lithographic inks and clear varnishes, and improving lithographic behavior as an additive. view less | Request Sample |
| EBECRYL® 870 | Allnex | EBECRYL® 870 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 870 provides the proper hydrophilic-lipophilic balance necessary for lithography, and high reactivi...view more EBECRYL® 870 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 870 provides the proper hydrophilic-lipophilic balance necessary for lithography, and high reactivity when cured by ultraviolet light (UV) or an electron beam (EB). It is recommended for: fast curing lithographic inks and clear varnishes, and improving lithographic behavior as an additive. view less | Request Sample |
| UCECOAT® 2804 | Allnex | UCECOAT® 2804 is a low viscosity, high performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO-free. Its polymer composition was optimized for high ...view more UCECOAT® 2804 is a low viscosity, high performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO-free. Its polymer composition was optimized for high reactivity and low migration potential. Approximately 99.5% of the solid fraction is constituted by oligomers and polymers having a molecular weight above 500 Daltons, at the same time, an acrylic double bond functionality equal to or greater than 6. It is tack-free and water re-dispersible after water evaporation but before cure. view less | Request Sample |
| SETALUX® 57-1608 | Allnex | SETALUX 57-1608 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt spr...view more SETALUX 57-1608 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt spray, water soak and humidity. Based on accelerated weathering tests, exterior durability is excellent. SETALUX 57-1608 is SETALUX 17-1608 in t-butyl acetate. view less | Request Sample |
| Titanate FD-IAM | Zhejiang Feidian Chemical Co., Ltd. | Titanate FD-IAM is a new grade of titanate specifically developed for the printing ink industry. This new titanium-based phosphate complex helps overcome some of the identified performance issues. It offers the following features: good stability in solven...view more Titanate FD-IAM is a new grade of titanate specifically developed for the printing ink industry. This new titanium-based phosphate complex helps overcome some of the identified performance issues. It offers the following features: good stability in solvent-borne printing inks, good adhesion promotion and cross-linking properties resulting in improved water, solvent, and heat resistance, high reactivity during curing, low or no discoloration, and no release of acetylacetone. view less | |
| EPOCROS™ K-2020E | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ K-2020E is a VOC-free adhesion promoter and a waterborne crosslinking agent based on styrene/acrylic oxazoline functionalized reactive copolymer. It exhibits high reactivity with carboxyl groups and crosslinking reaction at low temperature (80-12...view more EPOCROS™ K-2020E is a VOC-free adhesion promoter and a waterborne crosslinking agent based on styrene/acrylic oxazoline functionalized reactive copolymer. It exhibits high reactivity with carboxyl groups and crosslinking reaction at low temperature (80-120°C) with no by-product. It offers film properties, low toxicity, fast drying along with improved water- and heat resistance. It possesses a controllable appearance by adjusting glass transition temperature. It has a long pot life for one packaging. It shows excellent adhesion particularly to polyester such as PET. Recommended for coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. view less | Request Sample |
| Epokukdo KEM-128M | Kukdo Chemical Co., Ltd. | Epokukdo KEM -128M is a emulsible epoxy resin which can be easily emulsified by adding water slowly with a high speed stirrer. KEM-128M is available for combination with water dispersible curing agent such as, Docure KH-723, KH-721 and so on. KEM-128M and...view more Epokukdo KEM -128M is a emulsible epoxy resin which can be easily emulsified by adding water slowly with a high speed stirrer. KEM-128M is available for combination with water dispersible curing agent such as, Docure KH-723, KH-721 and so on. KEM-128M and water dispersible curing agent like KH-723 are applied for water thinned two pack coatings, coal tar modified paint and primer for steel, concrete, and other nonmetallic substrates. It is also applied for decorative wall, structural grouting, adhesives and mortar in order to improve adhesive property and physical properties of cement by adding 10-20wt% epoxy resin emulsion. view less | |
| K-KAT® 6212 | King Industries, Inc. | K-KAT® 6212 appears as a clear, straw liquid and is an effective stimulant when isocyanate and hydroxyl groups react with each other. It is a zirconium chelate complex dissolved in a reactive diluent. It offers good cure response and exterior durability a...view more K-KAT® 6212 appears as a clear, straw liquid and is an effective stimulant when isocyanate and hydroxyl groups react with each other. It is a zirconium chelate complex dissolved in a reactive diluent. It offers good cure response and exterior durability along with a short tack free time. This product doesn't add to the hydrolysis of polyester resins and high selectivity for NCO/OH reactions over NCO/water reaction. It is soluble in esters, alcohols, ketones, aliphatic and aromatic hydrocarbons, glycol ethers, and glycol ether acetates. It is only partially soluble in water. It can be applied to adhesives, polyurethane coatings, casting resins and polyurethane resin synthesis, RIM, and water-based two component coatings. view less | |
| EPOCROS™ K-2010E | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ K-2010E is a soft, VOC-free, styrene/acrylic-based oxazoline functionalized reactive copolymer. It acts as an adhesion promoter and a waterborne crosslinking agent. It It offers film properties, low toxicity, fast drying and improved water- & hea...view more EPOCROS™ K-2010E is a soft, VOC-free, styrene/acrylic-based oxazoline functionalized reactive copolymer. It acts as an adhesion promoter and a waterborne crosslinking agent. It It offers film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion particularly to polyester such as PET and a controllable appearance by glass transition temperature adjustment. It also offers crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. EPOCROS™ K-2010E is used in coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. view less | Request Sample |
| JONCRYL® 2153 | BASF Dispersions & Resins | JONCRYL 2153 is a hard, RC styrene acrylic emulsion for use in economical industrial coatings for wood clears and hardboard primers. It offers superb application properties, low foam, good adhesion, high gloss potential, fast drying with excellent early hardness development and inherent pigment dispersing ability without the use of conventional surfactants. JONCRYL 2153 is recommended for applications such as: interior waterborne...view more JONCRYL 2153 is a hard, RC styrene acrylic emulsion for use in economical industrial coatings for wood clears and hardboard primers. It offers superb application properties, low foam, good adhesion, high gloss potential, fast drying with excellent early hardness development and inherent pigment dispersing ability without the use of conventional surfactants. JONCRYL 2153 is recommended for applications such as: interior waterborne wood coatings for furniture or millwork applications view less | |
| CHEMIPOL UVA 220 | Chemipol | CHEMIPOL UVA 220 is a UV absorber for paints. The advantages include stabilized aqueous suspension of ultrafine Titanium dioxide (TiO2) without pigmentary properties, neutral pH, and high transparency. Specifically appropriate for polymeric paints needing...view more CHEMIPOL UVA 220 is a UV absorber for paints. The advantages include stabilized aqueous suspension of ultrafine Titanium dioxide (TiO2) without pigmentary properties, neutral pH, and high transparency. Specifically appropriate for polymeric paints needing UV protection. It is also suitable for any transparent coating, providing them with long-term UV screening in various substrates (wood, plastics, etc.). The particle size is approximately 30 nanometers. view less | Request Sample |
| N-Vinylpyrrolidone, NVP | BASF Corporation, Chemical Intermediates | N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a react...view more N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a reactive diluent in UV coatings, UV inks and UV adhesives. view less | |
| Dynoadd® P-506 | Dynoadd by Dynea | Dynoadd® P-506 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-506 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-506 has a particle size of 6 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | Request Sample |
| Dynoadd® P-510 | Dynoadd by Dynea | Dynoadd P-510® is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd P-510® is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-510 has a particle size of 10 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | Request Sample |
| Dynoadd® P-515 | Dynoadd by Dynea | Dynoadd® P-515 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-515 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-515 has a particle size of 15 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | Request Sample |
| Dynoadd® P-520 | Dynoadd by Dynea | Dynoadd® P-520 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-520 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-520 has a particle size of 20 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | Request Sample |
| Dynoadd® P-530 | Dynoadd by Dynea | Dynoadd® P-530 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-530 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-530 has a particle size of 30 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | Request Sample |
| Gasil® UV70C | PQ Corporation | Gasil® UV70C is an organically treated silica gel specifically designed as an effective matting agent for 100% solids UV curable coatings for wood, plastic and graphic industry. Gasil® UV70C provides excellent matting efficiency combined with minimal effe...view more Gasil® UV70C is an organically treated silica gel specifically designed as an effective matting agent for 100% solids UV curable coatings for wood, plastic and graphic industry. Gasil® UV70C provides excellent matting efficiency combined with minimal effect on clarity and mechanical film properties. view less | |
| HIKOTACK P-90S | Kolon | HIKOTACK P-90S is pale yellow thermoplastic resin n be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK P-90HS | Kolon | HIKOTACK P-90HS is pale yellow thermoplastic resin which is used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| SPUR+ 3030 prepolymer | Momentive | SPUR+ 3030 prepolymer is an excellent candidate to consider for formulating non-isocyanate, moisture curable roof coatings and waterproof membranes. It was developed to enable the formulation of roof coating with a wide application window and excellent fu...view more SPUR+ 3030 prepolymer is an excellent candidate to consider for formulating non-isocyanate, moisture curable roof coatings and waterproof membranes. It was developed to enable the formulation of roof coating with a wide application window and excellent fully cured properties including tear, UV and water resistance. view less | |
| EPOCROS™ K-2035E | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ K-2035E acts as an adhesion promoter and a waterborne crosslinking agent. It is a hard, VOC-free styrene/acrylic-based oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat ...view more EPOCROS™ K-2035E acts as an adhesion promoter and a waterborne crosslinking agent. It is a hard, VOC-free styrene/acrylic-based oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion particularly to polyester such as PET and controllable appearance by glass transition temperature adjustment. It offers crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. It has a long pot life for one packaging. EPOCROS™ K-2035E is used in coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. view less | Request Sample |
| CYCAT® 4045 | Allnex | CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne...view more CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH. view less | Request Sample |
| HIKOTACK P-90 | Kolon | HIKOTACK P-90 is pale yellow thermoplastic resin that can be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| NACURE® 4167 | King Industries, Inc. | NACURE® 4167 is an amine offset phosphate stimulant. It is an acid stimulant that is fragile and especially effective with polymeric or high imino melamines and phenolics. This product appears as a clear, straw liquid and offers good stability, water resi...view more NACURE® 4167 is an amine offset phosphate stimulant. It is an acid stimulant that is fragile and especially effective with polymeric or high imino melamines and phenolics. This product appears as a clear, straw liquid and offers good stability, water resistance, and solubility. It is soluble in esters, water, ketones, alcohols, glycol ethers, aliphatic and aromatic hydrocarbons. It can be applied in automotive, general industrials, and water-based coatings. view less | |
| LYNDCOAT BR 1110 RTU | Elkem Silicones | LYNDCOAT is a ready to use, silicone based, high mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers ...view more LYNDCOAT is a ready to use, silicone based, high mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers excellent release properties and lubricity. In addition, the product promotes air bleed and reduces defects caused by trapped air and buckled bladders. LYNDCOAT BR 1110 RTU replaces conventional lining cements and solvent based band ply lubricants, eliminating the flammability and toxicityproblems associated with these kinds of products. LYNDCOAT BR 1110 RTU is easy to use and is recommended for a single release application. It can be brushed, swabbed or sprayed onto the rubber surface. For maximum release and bladder life, the use of a durable bladder pre-treatment, such as LYNDCOAT BR 2101 RTU, is highly recommended. view less | |
| LYNDCOAT BR 1623 RTU | Elkem Silicones | LYNDCOAT BR 1623 RTU is a ready to use, silicone based, medium mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coatin...view more LYNDCOAT BR 1623 RTU is a ready to use, silicone based, medium mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers excellent release properties and lubricity. In addition, the product promotes air bleed and reduces defects caused by trapped air and buckled bladders. Lyndcoat BR 1623 RTU replaces conventional lining cements and solvent based band ply lubricants, eliminating the flammability and toxicityproblems associated with these kinds of products. Lyndcoat BR 1623 RTU is easy to use and is recommended for a single release application. It can be brushed, swabbed or sprayed onto the rubber surface. For maximum release and bladder life, the use of a durable bladder pre-treatment, such as Lyndcoat XR 3900 Primer, is highly recommended. view less | |
| CHEMIPOL UVA 150 | Chemipol | CHEMIPOL UVA 150 is a UV absorber for paints. The advantages are including stabilized aqueous suspension of ultrafine Titanium dioxide (TiO2) without pigmentary properties, neutral pH, and high transparency. Specifically appropriate for polymeric paints n...view more CHEMIPOL UVA 150 is a UV absorber for paints. The advantages are including stabilized aqueous suspension of ultrafine Titanium dioxide (TiO2) without pigmentary properties, neutral pH, and high transparency. Specifically appropriate for polymeric paints needing UV protection. It is also suitable for any transparent coating, providing them with long-term UV screening in various substrates (wood, plastics, etc.). The particle size is approximately 10 nanometers, a low surface tension for the coating. view less | Request Sample |
| GENOCURE* LBC | Rahn USA Corp. | GENOCURE* LBC is a liquid photoinitiator blend. it is a photoinitiator for UV curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically applied i...view more GENOCURE* LBC is a liquid photoinitiator blend. it is a photoinitiator for UV curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically applied in paper varnishes, metal varnishes, plastic coatings and water dilutable coatings. view less | Request Sample |
| HDDA | Allnex | HDDA (Hexanediol diacrylate) is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, w...view more HDDA (Hexanediol diacrylate) is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, weathering and adhesion are desired in combination with excellent water resistance. view less | Request Sample |
| CARBODILITE™ SW-12 G | GSI Exim America, Inc. | CARBODILITE™ SW-12 G is a multifunctional carbodiimide based crosslinking agent which provides higher crosslinking performance over conventional carbodiimides. This grade offers shorter curing time at lower and ambient temperatures. It contains carbodiimi...view more CARBODILITE™ SW-12 G is a multifunctional carbodiimide based crosslinking agent which provides higher crosslinking performance over conventional carbodiimides. This grade offers shorter curing time at lower and ambient temperatures. It contains carbodiimide 【─N＝C＝N─】, which reacts with carboxyl group. Product properties such as water resistance, chemical resistance and adhesion will be improved. CARBODILITE™ SW-12 G is a clear pale yellow liquid with 470 ※3 Carbodiimide Equivalent wt.※2. view less | |
| Benox® B55-108 | UNITED INITIATORS GMBH & CO KG | Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized b...view more Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized by its lower water content, compared to Benox® B55-107. Benox® B55-108 can also be used in two-part adhesive systems based on methacylate or polyester resins. view less | |
| PanTINT® 87K1383 | Pan Technology Inc. | PanTINT® 87K1383 is a concentrated dispersion of Tinting Black in a modified long oil alkyd for tinting of solvent based architectural paints and light industrial coatings. This product has the C.I. Name BK 7. PanTINT® 87 Colorants have exceptionally broa...view more PanTINT® 87K1383 is a concentrated dispersion of Tinting Black in a modified long oil alkyd for tinting of solvent based architectural paints and light industrial coatings. This product has the C.I. Name BK 7. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87K1350 | Pan Technology Inc. | PanTINT® 87K1350 is a concentrated dispersion of Masstone Carbon Black in a modified long oil alkyd for solvent based architectural paints and light industrial coatings. This product has the C.I. Name BK 7. PanTINT® 87 Colorants have exceptionally broad c...view more PanTINT® 87K1350 is a concentrated dispersion of Masstone Carbon Black in a modified long oil alkyd for solvent based architectural paints and light industrial coatings. This product has the C.I. Name BK 7. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| Voxtar™ D100 | Perstorp | Voxtar™ D100 is a functional polyol with six primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 222 °C. Voxtar™ D100 is based on 100% renewable materials and is used in UV-curable...view more Voxtar™ D100 is a functional polyol with six primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 222 °C. Voxtar™ D100 is based on 100% renewable materials and is used in UV-curable resins and monomers, synthetic lubricants, and liquid alkyd and polyester resins. view less | |
| Voxtar™ D50 | Perstorp | Voxtar™ D50 is a functional polyol with six primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 222 °C. Voxtar™ D50 is based on 40% renewable content and is used in UV-curable...view more Voxtar™ D50 is a functional polyol with six primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 222 °C. Voxtar™ D50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, and liquid alkyd and polyester resins. view less | |
| UCECOAT® 7700 | Allnex | UCECOAT® 7700 is the Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially pigmented,...view more UCECOAT® 7700 is the Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially pigmented, but can also be used for clear coatings and for other applications and substrates. This polyurethane dispersion is very reactive and the cured coating exhibits outstanding scratch and stain resistance also in thick pigmented layers. view less | Request Sample |
| UCECOAT® 7701 | Allnex | UCECOAT® 7701 is the MIT- and Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially p...view more UCECOAT® 7701 is the MIT- and Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially pigmented, but can also be used for clear coatings and for other applications and substrates. This polyurethane dispersion is very reactive and the cured coating exhibits outstanding scratch and stain resistance also in thick pigmented layers. view less | Request Sample |
