| PAT-ADD SU 440 | Patcham USA | PAT-ADD SU 440 is a nonionic surface active agent for excellent wetting and dispersing in aqueous systems with minimum foam. Due to its multifunctional properties, this product provides performance benefits in many applications, such as paints, inks, adhesives and other chemical formulations. Its main applications are in WB industrial paints, inks and adhesives. Main benefits are: excellent pigment wetting properties, does not contribute to foam formation, strong reduction of surface tension in aqueous systems, lower water solubility,low use levels, and improved flow...view more PAT-ADD SU 440 is a nonionic surface active agent for excellent wetting and dispersing in aqueous systems with minimum foam. Due to its multifunctional properties, this product provides performance benefits in many applications, such as paints, inks, adhesives and other chemical formulations. Its main applications are in WB industrial paints, inks and adhesives. Main benefits are: excellent pigment wetting properties, does not contribute to foam formation, strong reduction of surface tension in aqueous systems, lower water solubility,low use levels, and improved flow and leveling. view less | Request Sample |
| Resiflow® L | Estron Chemical, Inc. | Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve fl...view more Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve flow and leveling (orange peel), and improve the flexibility of coatings. This can be easily achieved by thoroughly mixing Resiflow® L with the other paint ingredients. Resiflow® L has compatibility with all coating resins and can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Luna-matt 70 | DKSH | Luna-matt 70 is a new version matting hardener for hybrid powder coatings. It can produce gloss level less than 3% by selecting proper polyester resins. Compa-red with the typical type of matt hardener, Luna-matt 70 can provide excellent anti-yellowing, color stability and gloss stability at over baking condition, special application in light color powder coating. It can also provide good surface properties such as excellent flow...view more Luna-matt 70 is a new version matting hardener for hybrid powder coatings. It can produce gloss level less than 3% by selecting proper polyester resins. Compa-red with the typical type of matt hardener, Luna-matt 70 can provide excellent anti-yellowing, color stability and gloss stability at over baking condition, special application in light color powder coating. It can also provide good surface properties such as excellent flow, smooth surface and excellent finger print resistance. This product is available in Europe, Asia and North America. view less | Request Sample |
| CRAYVALLAC® A-2678-M | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-2678-M is a high performance acrylic dispersing and flow control agent for the control of coating surface properties. CRAYVALLAC® A-2678-M has been developed specifically to eliminate film surface defects that may occur during the film forma...view more CRAYVALLAC® A-2678-M is a high performance acrylic dispersing and flow control agent for the control of coating surface properties. CRAYVALLAC® A-2678-M has been developed specifically to eliminate film surface defects that may occur during the film formation. The following benefits are to be gained by using CRAYVALLAC® A-2678-M in water based coatings: Enhanced substrate wetting and coating leveling, Reduced craters, fisheyes and pinhole. The results of these enhancements are smoother films with fewer imperfections and a superior overall appearance (measurable with glow and DOI) when compared with the unmodified coating. view less | Request Sample |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems including NC- and acid curing wood lacquers, yacht varnishes, parquet lacquers, paper coatings and leather finishes. W´Add 311 imparts mar-resistance to paint and lacquer surface, gives a smooth satin feel to the surface, improves flow...view more WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems including NC- and acid curing wood lacquers, yacht varnishes, parquet lacquers, paper coatings and leather finishes. W´Add 311 imparts mar-resistance to paint and lacquer surface, gives a smooth satin feel to the surface, improves flow-out, reduces orange-peel and Benard's cell effect. view less | |
| AEROSIL® 200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is possible easily. It is also used to improve free flow and anti-caking chara...view more AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is possible easily. It is also used to improve free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica' and holds a COSMOS certification. view less | Request Sample |
| RHEOBYK-H 7500 VF | BYK | RHEOBYK-H 7500 VF is a VOC-free associative thickener (HEUR) for aqueous systems, especially for spray applications, to generate a highly pseudoplastic flow behavior. It significantly increases the viscosity in the low shear range. It reduces sagging and ...view more RHEOBYK-H 7500 VF is a VOC-free associative thickener (HEUR) for aqueous systems, especially for spray applications, to generate a highly pseudoplastic flow behavior. It significantly increases the viscosity in the low shear range. It reduces sagging and increases storage stability. The additive is liquid and therefore easy to handle. It is not necessary to adjust the pH value or control the temperature during incorporation. When combined with rheology additives which are effective in the high shear range, such as the RHEOBYK-L/T series, it enables an optimum processability. view less | Request Sample |
| RHEOBYK-H 7625 VF | BYK | RHEOBYK-H 7625 VF is a VOC-, APEO- and tin-free associative thickener (HEUR) for aqueous systems to generate highly pseudoplastic flow behavior. It dramatically increases viscosity in the low shear range. It reduces the sagging tendency and increases stor...view more RHEOBYK-H 7625 VF is a VOC-, APEO- and tin-free associative thickener (HEUR) for aqueous systems to generate highly pseudoplastic flow behavior. It dramatically increases viscosity in the low shear range. It reduces the sagging tendency and increases storage stability. The additive is liquid and therefore easy to handle. It is not necessary to adjust the pH value or control the temperature during incorporation. Combining with rheology additives that are effective in the same high shear range as the RHEOBYK-L/T series, results in optimum processability. view less | Request Sample |
| NACURE® 1953 | King Industries, Inc. | NACURE® 1953 is an amine blocked DNNSA stimulant and appears as a clear amber liquid. This is a product that is made to be applied in higher bake amino crosslinked systems like metal decorating, coil coatings and can also be applied in things such as electrocoating and appliance finishes. This product is resistant to detergent, overbake, humidity, and offers great flow...view more NACURE® 1953 is an amine blocked DNNSA stimulant and appears as a clear amber liquid. This is a product that is made to be applied in higher bake amino crosslinked systems like metal decorating, coil coatings and can also be applied in things such as electrocoating and appliance finishes. This product is resistant to detergent, overbake, humidity, and offers great flow and leveling, along with good solubility in organic solvents. NACURE® 1953 is soluble in aliphatic and aromatic hydrocarbons, alcohol, ketones, esters, glycol ethers and is insoluble in water. view less | |
| Ottopol SX-30 | Gellner Industrial, LLC | Ottopol SX-30 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-30 provides excellent resolubility properties for flexo and gravure printing applications. The flow...view more Ottopol SX-30 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-30 provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of the product will provide a high gloss finish. The resin provides non-curling properties on paper. view less | |
| Ottopol 25-30 | Gellner Industrial, LLC | Ottopol 25-30 is a clear, viscous acrylic resin solution, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic inks. It has excellent adhesion to substrates on PVC, polyester, polystyrene, and coated cellophane. This product imparts excellent flow...view more Ottopol 25-30 is a clear, viscous acrylic resin solution, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic inks. It has excellent adhesion to substrates on PVC, polyester, polystyrene, and coated cellophane. This product imparts excellent flow and leveling to inks and coatings and provides high gloss and excellent press stability. It can also be used as a dispersion stabilizer, or purely for wetting purposes. view less | |
| Ottopol 25-50 | Gellner Industrial, LLC | Ottopol 25-50 slightly hazy, viscous acrylic resin solution, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic inks. It has excellent adhesion to substrates on PVC, polyester, polystyrene, and coated cellophane. This product imparts excellent flow...view more Ottopol 25-50 slightly hazy, viscous acrylic resin solution, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic inks. It has excellent adhesion to substrates on PVC, polyester, polystyrene, and coated cellophane. This product imparts excellent flow and leveling to inks and coatings and provides high gloss and excellent press stability. It can also be used as a dispersion stabilizer, or purely for wetting purposes. view less | |
| Ottopol 25-50E | Gellner Industrial, LLC | Ottopol 25-50E is a milky white, acrylic emulsion, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic inks. It has excellent adhesion to substrates on PVC, polyester, polystyrene, and coated cellophane. This product imparts excellent flow...view more Ottopol 25-50E is a milky white, acrylic emulsion, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic inks. It has excellent adhesion to substrates on PVC, polyester, polystyrene, and coated cellophane. This product imparts excellent flow and leveling to inks and coatings and provides high gloss and excellent press stability. It can also be used as a dispersion stabilizer, or purely for wetting purposes. view less | |
| RHEOBYK-M 2600 VF | BYK | RHEOBYK-M 2600 VF is a non-ionic, hydrophobic modified polymer designed especially for thickening of emulsion paints and aqueous coatings systems. It is used in various emulsions such as styrene acrylates, pure acrylates, polyvinyl acetates, PU-dispersions, and others, as well as in alkyd and epoxy emulsions. The use of this product adds no VOC-solvents to the paint and improves the resistance against blistering. It also raises apparent viscosity significantly, gives excellent flow...view more RHEOBYK-M 2600 VF is a non-ionic, hydrophobic modified polymer designed especially for thickening of emulsion paints and aqueous coatings systems. It is used in various emulsions such as styrene acrylates, pure acrylates, polyvinyl acetates, PU-dispersions, and others, as well as in alkyd and epoxy emulsions. The use of this product adds no VOC-solvents to the paint and improves the resistance against blistering. It also raises apparent viscosity significantly, gives excellent flow and levelling, provides higher layer thickness in one pass, and reduces spattering during application. view less | Request Sample |
| Novoperm Yellow M2R 70 - Pigment Yellow 139 | Clariant Plastics and Coatings (Pigments) | Novoperm Yellow M2R 70 is a reddish yellow pigment with excellent fastness to light and weathering, especially in deep shades. Very good opacity for an organic pigment. As it has very good flow properties in paints, it can also be used at high pigment con...view more Novoperm Yellow M2R 70 is a reddish yellow pigment with excellent fastness to light and weathering, especially in deep shades. Very good opacity for an organic pigment. As it has very good flow properties in paints, it can also be used at high pigment concentrations (about 25 % pigment relative to solid binder) without affecting the gloss. Eminently suitable for the production of intense opaque yellow shades for lead-free or low-lead paints. It should be borne in mind that the resistance to very strong alkalis is in some binder systems unsatisfactory. view less | Request Sample |
| EFKA® RM 1920 | BASF Formulation Additives | EFKA® RM 1920 is a particularly finely ground additive used to impart a thixotropic effect to paints, printing inks and other coatings. The incorporation of EFKA® RM 1920 ensures a strong thixotropic effect in non-aqueous coatings. Sagging of thick films on vertical surfaces is effectively prevented whilst the working and flow...view more EFKA® RM 1920 is a particularly finely ground additive used to impart a thixotropic effect to paints, printing inks and other coatings. The incorporation of EFKA® RM 1920 ensures a strong thixotropic effect in non-aqueous coatings. Sagging of thick films on vertical surfaces is effectively prevented whilst the working and flow properties are also generally improved. Pigment settling is also substantially reduced. EFKA® RM 1920 can be used in most non-aqueous coatings both with and without solvents. The lower the polarity of the coating, the better is its performance. view less | |
| RHEOVIS® PU 1250 NC | BASF Formulation Additives | RHEOVIS® PU 1250 NC is a non-ionic rheology modifier for waterborne coatings that provides structural viscosity. It is a polyurethane polymer in water/butoxydiglycol. This yellowish, white hazy liquid is suitable for thickening and modification of flow pr...view more RHEOVIS® PU 1250 NC is a non-ionic rheology modifier for waterborne coatings that provides structural viscosity. It is a polyurethane polymer in water/butoxydiglycol. This yellowish, white hazy liquid is suitable for thickening and modification of flow properties of waterborne polymers and other aqueous systems as well as for finished products like coatings and putties. These properties can be achieved in all kind of emulsions based on e.g. acrylic copolymer, vinyl acetate homopolymer, acrylic polymers, PVAc-VC copolymers, polyurethanes, amine neutralized and emulsified systems. It is a mid-shear thickener with medium pseudoplasticity. view less | |
| EBECRYL® 350 | Allnex | EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a s...view more EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings. EBECRYL® 350 is recommended for use in: overprint varnishes, clear coatings on paper, plastics and metal, and release coatings. view less | Request Sample |
| Terlon™ 307 A | Lawter | Terlon™ 307 A is a drying oil alkyd with a linseed base in an alkyd that has good pigment wetting abilities and fast, hard-drying properties. It has the ability to carry and print a higher pigment load than conventional alkyds and bodied oils. Flushing or grinding with the product yields more cleanliness and color strength than conventional wetting systems, while still retaining good flow...view more Terlon™ 307 A is a drying oil alkyd with a linseed base in an alkyd that has good pigment wetting abilities and fast, hard-drying properties. It has the ability to carry and print a higher pigment load than conventional alkyds and bodied oils. Flushing or grinding with the product yields more cleanliness and color strength than conventional wetting systems, while still retaining good flow characteristics. Terlon™ 307 A is a good pigment binder on most printable surfaces and is used in applications such as coldset, web heatset, varnishes and metal decorating inks. view less | |
| PAT-ADD DA 815 | Patcham USA | PAT-ADD DA 815 Solvent-free wetting and dispersing additive for solvent-borne and solvent-free systems; PVC plastisols, thermoplastics, and adhesives to stabilize organic and inorganic pigments, particularly carbon blacks. It is especially suited for the production of polyol pastes for PU as well as PVC applications. It induces Newtonian flow...view more PAT-ADD DA 815 Solvent-free wetting and dispersing additive for solvent-borne and solvent-free systems; PVC plastisols, thermoplastics, and adhesives to stabilize organic and inorganic pigments, particularly carbon blacks. It is especially suited for the production of polyol pastes for PU as well as PVC applications. It induces Newtonian flow by strongly lowering viscosity. It can also work as neutralizer for acidic and neutral surface treated carbon black pigments. Main benefits are: provides excellent uniformity and color development, lowers torque requirement and filtration pressure, reduces viscosity, and solvent free. view less | Request Sample |
| Permax™ 4399 | Lubrizol Advanced Materials, Inc. | Permax™ 4399 is a high performance, hydrophilic compound that can provide a number of unique properties such as enhanced comfort, cooling, wicking, air-flow, wash-durability and cost-value performance vs. competing coatings. These performance characterist...view more Permax™ 4399 is a high performance, hydrophilic compound that can provide a number of unique properties such as enhanced comfort, cooling, wicking, air-flow, wash-durability and cost-value performance vs. competing coatings. These performance characteristics are partially dependent on the base textile substrate being coated and the application technique. This ready-to-use, water-borne, urethane based compound forms a soft, flexible film which has excellent adhesion to a variety of substrates including cotton, polyester, nylon and blends. This material can be used on knit, woven, or non-woven substrates. view less | |
| Dynol™ 800 Surfactant | Evonik Operations GmbH, BL Coating Additives | Dynol™ 800 is a low foam superwetter with exceptional performance in water-based coatings and inks. Dynol™ 800 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wood and plastic coatings as well as a wide variety of other water based coating applications. Dynol™ 800 surfactant has the ability to reduce both equilibrium and dynamic surface tension to levels not achieved with other surfactants. Dynol™ 800 surfactant is an excellent alternative for difficult-to-wet substrates requiring good flow...view more Dynol™ 800 is a low foam superwetter with exceptional performance in water-based coatings and inks. Dynol™ 800 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wood and plastic coatings as well as a wide variety of other water based coating applications. Dynol™ 800 surfactant has the ability to reduce both equilibrium and dynamic surface tension to levels not achieved with other surfactants. Dynol™ 800 surfactant is an excellent alternative for difficult-to-wet substrates requiring good flow and leveling under diverse application conditions. view less | Request Sample |
| Dynol™ 810 Surfactant | Evonik Operations GmbH, BL Coating Additives | Dynol™ 810 is a low foam superwetter with exceptional performance in water-based inks and coatings. Dynol™ 810 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wood and plastic coatings as well as a wide variety of other water based coating applications. Dynol™ 810 surfactant has the ability to reduce both equilibrium and dynamic surface tension to levels not achieved with other surfactants. Dynol™ 810 surfactant is an excellent alternative for difficult-to-wet substrates requiring good flow...view more Dynol™ 810 is a low foam superwetter with exceptional performance in water-based inks and coatings. Dynol™ 810 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wood and plastic coatings as well as a wide variety of other water based coating applications. Dynol™ 810 surfactant has the ability to reduce both equilibrium and dynamic surface tension to levels not achieved with other surfactants. Dynol™ 810 surfactant is an excellent alternative for difficult-to-wet substrates requiring good flow and leveling under diverse application conditions. view less | Request Sample |
| WorléeKyd S 549 (55% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | WorléeKyd S 549 (55% In White Spirit 145-195) is a low viscous, medium oil, fast drying alkyd resin for use in air and forced drying industrial, vehicle, and machine paints, as well as in fast drying do-it-yourself and radiator paints. W´Kyd S 549 is a medium fatty alkyd resin for universal use. Due to the good properties like fast drying, gloss retention and good weather resistance, high quality industrial, vehicle, car body, dipping and flow...view more WorléeKyd S 549 (55% In White Spirit 145-195) is a low viscous, medium oil, fast drying alkyd resin for use in air and forced drying industrial, vehicle, and machine paints, as well as in fast drying do-it-yourself and radiator paints. W´Kyd S 549 is a medium fatty alkyd resin for universal use. Due to the good properties like fast drying, gloss retention and good weather resistance, high quality industrial, vehicle, car body, dipping and flow coat paints as well as do-it-yourself and radiator paints can be produced. view less | |
| SZ-100 - Nanopartica Series Instruments | HORIBA Instruments, Inc. | SZ-100 - Nanopartica Series Instruments is a highly advanced analyzer solves the mysteries of the nano-world. A single device analyzes the three parameters that characterize nanoparticles: particle diameter, zeta potential, and molecular weight. Advantages of SZ-100 include sampling measurement using the industry’s lowest sample volume of 100 μL is possible and arithmetic processing from an auto-correlation function by a Fourier transformation to electrical mobility. SZ-100 provides a mean to highly accurate, highly reproducible measurement: electro-osmotic flow...view more SZ-100 - Nanopartica Series Instruments is a highly advanced analyzer solves the mysteries of the nano-world. A single device analyzes the three parameters that characterize nanoparticles: particle diameter, zeta potential, and molecular weight. Advantages of SZ-100 include sampling measurement using the industry’s lowest sample volume of 100 μL is possible and arithmetic processing from an auto-correlation function by a Fourier transformation to electrical mobility. SZ-100 provides a mean to highly accurate, highly reproducible measurement: electro-osmotic flow countermeasure. Some applications for SZ-100 include biomaterials such as vitamins, enzymes and metals. view less |  |
| K-PURE® CDR-3316 | King Industries, Inc. | K-PURE® CDR-3316 is a low viscosity, 100% active, linear, saturated, aliphatic polyester diol with main hydroxyl groups. This product was created to improve flexibility and enhance flow without effecting the hardness of the system. Usual formations includ...view more K-PURE® CDR-3316 is a low viscosity, 100% active, linear, saturated, aliphatic polyester diol with main hydroxyl groups. This product was created to improve flexibility and enhance flow without effecting the hardness of the system. Usual formations include cationic cured epoxies, aminoplast, siloxane and urethane based systems. It appears as a clear, light straw liquid and offers adhesion promotion and resistivity. This product is soluble in esters, alcohols, xylene, aromatic 100 & aromatic 150, ketones, and is insoluble in water. It can be applied in anti-reflective coatings, conformal coatings, and conductive & dielectric adhesives. view less | |
| SILVEX® 440-15-C Aluminum Pigment | Silberline Manufacturing Co., Inc. | SILVEX® 440-15-C is a medium-coarse particle size, bright aluminum glitter pigment dampened with mineral oil to minimize the potential for generating airborne pigment particles. This grade can be used to simulate metallic effects similar to those of 50 micron by 50 micron chopped foil pigments. This grade has a narrow particle size distribution range and will produce medium coarse glitter effects when used alone or with chromatic pigments or dyes. Due to its narrow distribution range this grade can be used to create metallic effects with minimal flow...view more SILVEX® 440-15-C is a medium-coarse particle size, bright aluminum glitter pigment dampened with mineral oil to minimize the potential for generating airborne pigment particles. This grade can be used to simulate metallic effects similar to those of 50 micron by 50 micron chopped foil pigments. This grade has a narrow particle size distribution range and will produce medium coarse glitter effects when used alone or with chromatic pigments or dyes. Due to its narrow distribution range this grade can be used to create metallic effects with minimal flow line appearance. view less | |
| EFKA® FA 4609 | BASF Formulation Additives | EFKA® FA 4609 is a polymeric wetting and dispersing agent with acidic groups. It shows outstanding performance in dispersing and stabilizing inorganic pigments in particular titanium dioxide. In combination with a universal solvent based grinding resin like Laropal® A 81, low mill base viscosities with reduced pseudo plastic flow...view more EFKA® FA 4609 is a polymeric wetting and dispersing agent with acidic groups. It shows outstanding performance in dispersing and stabilizing inorganic pigments in particular titanium dioxide. In combination with a universal solvent based grinding resin like Laropal® A 81, low mill base viscosities with reduced pseudo plastic flow behavior can be achieved. Furthermore, EFKA® FA 4609 is highly suitable to disperse iron oxide pigments. This product is suitable for many coating systems, such as automotive OEM and refinish coatings, solvent-based industrial coatings, coil coatings, especially TiO2, and wood coatings. view less | |
| SETAL® 11-2457 | Allnex | SETAL® 11-2457 is a pure medium soybean oil alkyd resin designed for use in high drink air-dry, force-dry or bake finishes. and nbsp; SETAL® 11-2457 allows the introduction of large amounts of reducing solvent for better economics. and nbsp; Additional chemical resistance and enhanced performance may be obtained by crosslinking with melamine resin. and nbsp; Cured films of SETAL® 11-2457 have good toughness and flexibility with good exterior durability and gloss retention. and nbsp; SETAL® 11-2457 provides good flow...view more SETAL® 11-2457 is a pure medium soybean oil alkyd resin designed for use in high drink air-dry, force-dry or bake finishes. and nbsp; SETAL® 11-2457 allows the introduction of large amounts of reducing solvent for better economics. and nbsp; Additional chemical resistance and enhanced performance may be obtained by crosslinking with melamine resin. and nbsp; Cured films of SETAL® 11-2457 have good toughness and flexibility with good exterior durability and gloss retention. and nbsp; SETAL® 11-2457 provides good flow and leveling in trade sales. view less | Request Sample |
| Terlon™ 311 A | Lawter | Terlon™ 311 A is a drying oil alkyd in a linseed base displaying good pigment wetting ability along with hard and fast-drying properties. The product is able to carry and print higher pigment loads than conventional alkyds and bodied oils. Grinding or flushing of the product results in more color strength and cleanliness than conventional wetting systems, while keeping good flow...view more Terlon™ 311 A is a drying oil alkyd in a linseed base displaying good pigment wetting ability along with hard and fast-drying properties. The product is able to carry and print higher pigment loads than conventional alkyds and bodied oils. Grinding or flushing of the product results in more color strength and cleanliness than conventional wetting systems, while keeping good flow characteristics. It is an ideal pigment binder with an ability to print on most printable surfaces. Such applications include metal decorating inks, coldset systems, web heatset inks, sheet-fed inks and varnishes. view less | |
| Eco-Set™ 4600 A | Lawter | Eco-Set™ 4600 A is a phenol formaldehyde-free, sheet-fed free-flow vehicle that has high renewable content which is geared toward demands for a greener and cleaner ink chemistry. Apart from sustainable chemistry interests, Eco-Set™ products are able to pr...view more Eco-Set™ 4600 A is a phenol formaldehyde-free, sheet-fed free-flow vehicle that has high renewable content which is geared toward demands for a greener and cleaner ink chemistry. Apart from sustainable chemistry interests, Eco-Set™ products are able to provide improved performance properties. Print sharpness, ink water balance and reduced misting tendencies allow the Eco-Set™ brand to be an ideal choice for commercial sheet-fed in product lines. The product is also ideal for use in letterpress inks, packaging sheet-fed inks and in laser form inks. view less | |
| Grilonit® V 68-39 | Estron Chemical, Inc. | Grilonit® V 68–39 is specifically designed for powder coatings and is suitable for all types of powder coating. This additive offers excellent gloss reduction for satin and matt powder coating finishes with excellent flow and enhanced mar and scratch resi...view more Grilonit® V 68–39 is specifically designed for powder coatings and is suitable for all types of powder coating. This additive offers excellent gloss reduction for satin and matt powder coating finishes with excellent flow and enhanced mar and scratch resistance. Grilonit® V 68–39 is non-yellowing in powder coatings at temperatures between 150°C and 230°C. Due to the finely micron zed particle size, Grilonit® V 68–39 can be used as a post additive after the extrusion process for gloss control for example in dry blend powder coatings. view less | |
| PAT-ADD DA 895 | Patcham USA | PAT-ADD DA 895 Solvent-free wetting and dispersing additive for solvent-borne and solvent-free systems; epoxy, and UPR formulations and adhesives to stabilize organic and inorganic pigments, particularly carbon blacks. It is also suitable for plasticizer or polyol based colorants for PU foam as well as PVC applications. It induces Newtonian flow...view more PAT-ADD DA 895 Solvent-free wetting and dispersing additive for solvent-borne and solvent-free systems; epoxy, and UPR formulations and adhesives to stabilize organic and inorganic pigments, particularly carbon blacks. It is also suitable for plasticizer or polyol based colorants for PU foam as well as PVC applications. It induces Newtonian flow behavior by strongly lowering viscosity. It can also work as neutralizer for acidic and neutral surface treated carbon black pigments. Main benefits are: provides excellent uniformity and color development, lowers torque requirement and filtration pressure, reduces viscosity, and solvent-free. view less | Request Sample |
| PAT-ADD SU 420 | Patcham USA | PAT-ADD SU 420 is a nonionic surface active additive that provides excellent wetting and dispersing in aqueous systems. Pat-Add SU 420 also acts as a defoamer. Due to its multifunctional properties, this product provides performance benefits in many applications, such as paints, inks, adhesives and other chemical formulations. PAT-ADD SU 420 is an easy to use, solvent-free liquid. Main benefits are: easy workability, excellent pigment wetting properties, does not contribute to foam stabilization, strong reduction of surface tension in aqueous systems, lower water solubility, and aids flow...view more PAT-ADD SU 420 is a nonionic surface active additive that provides excellent wetting and dispersing in aqueous systems. Pat-Add SU 420 also acts as a defoamer. Due to its multifunctional properties, this product provides performance benefits in many applications, such as paints, inks, adhesives and other chemical formulations. PAT-ADD SU 420 is an easy to use, solvent-free liquid. Main benefits are: easy workability, excellent pigment wetting properties, does not contribute to foam stabilization, strong reduction of surface tension in aqueous systems, lower water solubility, and aids flow and leveling. view less | Request Sample |
| Min-U-Gel® 400 | Active Minerals | Min-U-Gel® attapulgite thixotropic thickener is highly suited for low-shear rheology control (flow & leveling, sag control, spatter resistance and more) in a wide range of liquid systems. It is a reliable stabilizer that is derived from unique colloidal l...view more Min-U-Gel® attapulgite thixotropic thickener is highly suited for low-shear rheology control (flow & leveling, sag control, spatter resistance and more) in a wide range of liquid systems. It is a reliable stabilizer that is derived from unique colloidal lathe-shaped particles forming a very stable lattice structure that keeps liquids and particles more evenly dispersed and suspended. The uniformity it creates generates unique multi-functional performance benefits well beyond rheological properties, such as syneresis control, suspension, improved tint strength and hiding, reduced pigment flooding and in-can stability. view less | Request Sample |
| PAT-ADD RHEOL 100 | Patcham USA | PAT-ADD RHEOL 100 is HEUR based liquid rheology modifier for aqueous systems. This product contains low volatile organic components. PAT-ADD RHEOL 100 provides excellent anti-settling and anti-sagging properties while reducing risk of roller spattering during application. It is supplied in ready for use form and easily incorporated. Main benefits are: low VOC, contributes to excellent flow...view more PAT-ADD RHEOL 100 is HEUR based liquid rheology modifier for aqueous systems. This product contains low volatile organic components. PAT-ADD RHEOL 100 provides excellent anti-settling and anti-sagging properties while reducing risk of roller spattering during application. It is supplied in ready for use form and easily incorporated. Main benefits are: low VOC, contributes to excellent flow and leveling, excellent shelf stability, reduces risk of roller spattering during application, liquid, ready-for-use: manufacturing friendly, and designed for high PVC systems up to gloss emulsion paints and varnishes. view less | Request Sample |
| EFKA® FL 3740 EH | BASF Formulation Additives | EFKA® FL 3740 is a levelling agent with air release properties for nonaqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, EFKA® FL 3740 modifies the surface tension of the coatings. It also eliminates or reduces cratering, fish-eyes and orange peel; improves the flow...view more EFKA® FL 3740 is a levelling agent with air release properties for nonaqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, EFKA® FL 3740 modifies the surface tension of the coatings. It also eliminates or reduces cratering, fish-eyes and orange peel; improves the flow, dispersion and floating behaviour, prevents air entrapment and optimizes wetting of the substrate. EFKA® FL 3740 is also ideally suited to be used in the manufacture of powder coatings or binders for powder coatings. For the preparation of a master batch, it is recommended to use a mixing of 9 parts of polyester resin with 1 part EFKA® FL 3740. This mixture is perfectly suited for direct application in the premix and extrusion process after melting, homogenization, cooling and granulation. The drawbacks of leveling agents applied on SiO2 are avoided. In particular, pigmented and transparent powder coatings with excellent levelling properties are obtained for the production of weatherproof powder coatings. view less | |
| Butyl glycolate (BG) | Keeneyes International Co., Ltd. | Butyl glycolate (BG) is a colorless liquid with a very faint, ester-like odor. The product is miscible with the common organic solvents but only partially miscible with water. With respect to the thermal stability of BG as a "2-hydroxy ester," reactions s...view more Butyl glycolate (BG) is a colorless liquid with a very faint, ester-like odor. The product is miscible with the common organic solvents but only partially miscible with water. With respect to the thermal stability of BG as a "2-hydroxy ester," reactions such as glycolide formation, transesterification, saponification and etherification occur at elevated temperatures, especially at the boiling point, creating an upwards extension of the boiling point range. view less | |
| BYKETOL-OK | BYK | BYKETOL-OK is a silicone-free surface additive for solvent-borne coatings to prevent surface defectsand to improve leveling. | Request Sample |
| PAT-ADD LE 1075 | Patcham USA | PAT-ADD LE 1075 is leveling additive and multipurpose interfacial tension modifier for printing inks and paint formulations. It is silicone and fluorine free and highly suitable for eliminating coating surface defects. Main benefits are: improved substrat...view more PAT-ADD LE 1075 is leveling additive and multipurpose interfacial tension modifier for printing inks and paint formulations. It is silicone and fluorine free and highly suitable for eliminating coating surface defects. Main benefits are: improved substrate wetting, optimized wetting and adhesion, easy incorporation, add and mix, low surface tension in water (0,5%): approximately 33mNm, free of silicones: no adverse effect on intercoat adhesion. view less | Request Sample |
| Chroma-Chem® UCD-2360N | Chromaflo Technologies | Chroma-Chem® UCD-2360N is a bentone additive for industrial coatings. The UCD® additives have been designed to work in conjunction with our industrial colorants. The additives have been formulated to minimize or eliminate pigment settling, improve coating...view more Chroma-Chem® UCD-2360N is a bentone additive for industrial coatings. The UCD® additives have been designed to work in conjunction with our industrial colorants. The additives have been formulated to minimize or eliminate pigment settling, improve coating performance, and adjust gloss levels. view less | Request Sample |
| Chroma-Chem® UCD-9844N | Chromaflo Technologies | Chroma-Chem® UCD-9844N is an MPA additive for industrial coatings. The UCD® additives have been designed to work in conjunction with our industrial colorants. The additives have been formulated to minimize or eliminate pigment settling, improve coating pe...view more Chroma-Chem® UCD-9844N is an MPA additive for industrial coatings. The UCD® additives have been designed to work in conjunction with our industrial colorants. The additives have been formulated to minimize or eliminate pigment settling, improve coating performance, and adjust gloss levels. view less | Request Sample |
| SCHUTZENLEV- EP 10 | SCHÜTZEN Chemical Group | SCHUTZENLEV- EP 10 is used as levelling agent and wetting effect in polar systems in the paint and coating industry. | |
| SCHUTZENLEV- EP 25 | SCHÜTZEN Chemical Group | SCHUTZENLEV- EP 25 is a slip and levelling agent for paint and coating industry. | |
| Dynoadd® F-300 | Dynoadd by Dynea | Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with b...view more Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with backbone resins than Dynoadd® F-3 and gives improved performance in more polar systems. Dynoadd® F-300 has applications in can coatings and coil coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-3. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-102 | Dynoadd by Dynea | Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulati...view more Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulations. Addition of Dynoadd® F-102 will have a positive contribution to substrate wetting. Dynoadd® F-102 can be used in combination with other Dynoadd® products such as Dynoadd® F-1. Dynoadd® F-102 has applications in coil coatings and general industrial. The additive has limited compatibility in many lacquer systems, thus contributing to good defoaming as well as leveling. It may be used in all layers in multi-layered systems. view less | Request Sample |
| COATOSIL* 2287 SILANE | Momentive | CoatOSil 2287 silane may provide shelf stable non-yellowing crosslinking performance to enhance the physical properties of waterborne dispersion polymers such as polyurethane and acrylic latexes. When CoatOsil 2287 silane is incorporated as a crosslinker ...view more CoatOSil 2287 silane may provide shelf stable non-yellowing crosslinking performance to enhance the physical properties of waterborne dispersion polymers such as polyurethane and acrylic latexes. When CoatOsil 2287 silane is incorporated as a crosslinker or adhesion promoter, it may provide improved water resistance and wet adhesion, with good shelf stability. view less | |
| COATOSIL* 2287 SILANE | Momentive | Coatosil 2287 silane may provide shelf stable non-yellowing cross-linking performance to enhance the physical properties of waterborne dispersions polymers such as polyurethane and acrylic latexes. | |
| COATOSIL* 2812 COATINGS ADDITIVE | Momentive | COATOSIL* 2812 COATINGS ADDITIVE is a linear silicone-polyether (EO) block copolymer with -OH end group. It can help reduce coefficient of friction (COF) and enhance slip and mar resistance in waterborne, water reducible, conventional and high-solids solv...view more COATOSIL* 2812 COATINGS ADDITIVE is a linear silicone-polyether (EO) block copolymer with -OH end group. It can help reduce coefficient of friction (COF) and enhance slip and mar resistance in waterborne, water reducible, conventional and high-solids solvent systems. Applications include waterborne coatings, solventborne coatings and solventless or high-solids coatings. view less | |
| COATOSIL* 1770 SILANE | Momentive | CoatOSil* 1770 silane is a crosslinking additive for waterborne coatings. An improved combination of performance, appearance and handling characteristics may be possible in waterborne coatings formulated with CoatOSil 1770 silane. When properly formulate...view more CoatOSil* 1770 silane is a crosslinking additive for waterborne coatings. An improved combination of performance, appearance and handling characteristics may be possible in waterborne coatings formulated with CoatOSil 1770 silane. When properly formulated, crosslinking can occur under both room temperature and elevated temperature conditions. view less | |
| COATOSIL DSA 6 | Momentive | CoatOSil DSA 6 friction modifier is a silicone micro resin and an excellent candidate to consider for use as an additive to help improve the performance of coatings. In addition to providing silicone lubricity, CoatOSil DSA 6 friction modifierhas a lower ...view more CoatOSil DSA 6 friction modifier is a silicone micro resin and an excellent candidate to consider for use as an additive to help improve the performance of coatings. In addition to providing silicone lubricity, CoatOSil DSA 6 friction modifierhas a lower specific gravity than conventional inorganic fine powders and typcally has superior heat and chemical resistance as compared with conventional organic fine powders. view less | |
| COATOSIL DSA 10 | Momentive | CoatOSil DSA 10 is a silicone micro resin and an excellent candidate to consider for use as an additive to help improve the performance of coatings. In addition to providing the specific characteristics of silicones, such as lubricity and water repellency...view more CoatOSil DSA 10 is a silicone micro resin and an excellent candidate to consider for use as an additive to help improve the performance of coatings. In addition to providing the specific characteristics of silicones, such as lubricity and water repellency, CoatOSil DSA 10 silicone micro resin has a lower specific gravity than conventional inorganic fine powders and typically has superior heat and chemical resistance as compared with conventional organic fine powders. view less | |
| Dynoadd® F-100 | Dynoadd by Dynea | Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with b...view more Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with backbone resins than Dynoadd® F-1 and gives improved performance in more polar systems. Dynoadd® F-100 has applications in coil coatings, can coatings, automotive OEM, and printing inks. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-1. It may be used in all layers in multi-layered systems. view less | Request Sample |
| VESTASOL® DHN | Evonik Operations GmbH, BL Crosslinkers | VESTASOL® DHN is a cyclo-aliphatic hydrocarbon with a characteristic odor. It is insoluble in water but miscible with organic solvents. The mixture of isomers contain approximately 60% trans-Decahydronaphthalene. This product is used as a solvent for fats, resins, waxes, and lacquers. High gloss and good flow...view more VESTASOL® DHN is a cyclo-aliphatic hydrocarbon with a characteristic odor. It is insoluble in water but miscible with organic solvents. The mixture of isomers contain approximately 60% trans-Decahydronaphthalene. This product is used as a solvent for fats, resins, waxes, and lacquers. High gloss and good flow is obtained when used in lacquers. It is well proved as a cleaning agent for print sheets and as a solvent for textile dyes. It is used as a solvent in the production of amorphous polyolefins which are again used in the manufacture of compact disks, laser disks, and digital video disks. view less | Request Sample |
| RHEOBYK-415 | BYK | RHEOBYK-415 is a liquid rheology additive for solvent-borne baking coatings and forced drying systems to improve anti-sagging properties. It works together with the binder and builds a three-dimensional network via hydrogen bonds and van der Waals forces. In addition to the dosage level and the polarity of the system, the degree of disentanglement of the higher molecular weight additive is key to the effectiveness. The higher molecular weight and the more pronounced pseudoplastic flow...view more RHEOBYK-415 is a liquid rheology additive for solvent-borne baking coatings and forced drying systems to improve anti-sagging properties. It works together with the binder and builds a three-dimensional network via hydrogen bonds and van der Waals forces. In addition to the dosage level and the polarity of the system, the degree of disentanglement of the higher molecular weight additive is key to the effectiveness. The higher molecular weight and the more pronounced pseudoplastic flow behavior are the reasons for the more temperature-stable viscosity behavior of RHEOBYK-415, even at higher drying temperatures. view less | Request Sample |
| R-2630 | NuSil Silicone Technology 1 | R-2630 is a black, electrically conductive RTV silicone that has a high durometer. It is based on a methyl silicone polymer and has a broad temperature range. This product can be used to adhere covers on housings or where grooves or other configurations require a flowable to limited flow...view more R-2630 is a black, electrically conductive RTV silicone that has a high durometer. It is based on a methyl silicone polymer and has a broad temperature range. This product can be used to adhere covers on housings or where grooves or other configurations require a flowable to limited flow material with a low viscosity. It can also be used for RFI and EMI shielding for space and electrical applications. It is well suited for formed in place conductive gaskets and has an operating temperature range of 65°C to 200°C (-85°F to 392°F). view less | |
| PowderAdd™ 9020 | Lubrizol Advanced Materials, Inc. | PowderAdd™ 9020 is a blend of selected waxes for the specific use in road marking coatings. It can be used in thermoplastic road marking paints based on hydrocarbon resins as well as conventional 1K and 2K paints. In the production of thermoplastic road-marking paints it enhances the wetting and the dispersion of pigments and fillers. Additionally does it help to liquefy the thermoplastic melt, due to the low melt viscosity and will improve flow...view more PowderAdd™ 9020 is a blend of selected waxes for the specific use in road marking coatings. It can be used in thermoplastic road marking paints based on hydrocarbon resins as well as conventional 1K and 2K paints. In the production of thermoplastic road-marking paints it enhances the wetting and the dispersion of pigments and fillers. Additionally does it help to liquefy the thermoplastic melt, due to the low melt viscosity and will improve flow properties. In conventional road marking paints PowderAdd 9020 prevents a hard sedimentation of pigments and fillers and makes the paint easier to apply. view less | |
| Ottopol SX-50 | Gellner Industrial, LLC | Ottopol SX-50 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-50 provides excellent resolubility properties for flexo and gravure printing applications. The flow...view more Ottopol SX-50 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-50 provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of the product will provide a high gloss finish. Due to the internally cross-linking mechanism, Ottopol SX-50's block and scuff resistance is improved over conventional vehicles. view less | |
| Ottopol SX-75 | Gellner Industrial, LLC | Ottopol SX-75 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-75 provides excellent resolubility properties for flexo and gravure printing applications. The flow...view more Ottopol SX-75 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-75 provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of the product will provide a high gloss finish. Due to the internally cross-linking mechanism, Ottopol SX-75's block and scuff resistance is improved over conventional vehicles. view less | |
| Borchi® Gol LA 1 | Borchers, A Company of OMG | Borchi® Gol LA 1 is a surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in waterborne and solventborne coating systems. This product develops a medium surface tension reduction and can be used ei...view more Borchi® Gol LA 1 is a surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in waterborne and solventborne coating systems. This product develops a medium surface tension reduction and can be used either for clearcoats or for pigmented coating systems. It is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints based on hydroxyl-functional polyacrylates and polyesters, primarily polyester melamine or polyester isocyanate systems. In physically drying systems like water-soluble alkyds, polyurethane and acrylate dispersions, this product improves scratch, levelling and slip behaviour. view less | |
| Hauthane L-3310 | Hauthaway | Hauthane L-3310 is a hard, self-coalescing, aliphatic, polyester-based, polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for low VOC (<100 g/l) topcoat formulations used on a wide variety of substrat...view more Hauthane L-3310 is a hard, self-coalescing, aliphatic, polyester-based, polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for low VOC (<100 g/l) topcoat formulations used on a wide variety of substrates, including concrete, metal, plastic and wood. L-3310 is ideal for use in applications where excellent flow and leveling properties, and high levels of water- and chemical-resistance are required. L-3310 can be used as a sole vehicle or blended with acrylic emulsions for spray, brush or roller applications. Rheology modifications can be made with associative thickeners. view less | |
| CYMEL® 350 | Allnex | CYMEL® 350 resin is a highly methylated, monomeric melamine resin recommended for use in both waterborne and solvent-borne systems. It has very good water solubility properties which makes it easy to incorporate with excellent stability in emulsion systems, as it remains in the water phase and does not migrate to the polymer phase. It is a very efficient crosslinking agent and is recommended for coil coatings and high solids systems. CYMEL® 350 resin has a slightly slower cure response than other monomeric methylated melamine resins. This provides excellent flow...view more CYMEL® 350 resin is a highly methylated, monomeric melamine resin recommended for use in both waterborne and solvent-borne systems. It has very good water solubility properties which makes it easy to incorporate with excellent stability in emulsion systems, as it remains in the water phase and does not migrate to the polymer phase. It is a very efficient crosslinking agent and is recommended for coil coatings and high solids systems. CYMEL® 350 resin has a slightly slower cure response than other monomeric methylated melamine resins. This provides excellent flow and leveling characteristics and less solvent popping on cure. view less | Request Sample |
| Borchi® Gol LA 10 | Borchers, A Company of OMG | Borchi® Gol LA 10 is a pre-diluted surface active agent based on an organo-modified silicone compound. It promotes flow and levelling properties in solvent based coating systems. This product develops a medium surface tension reduction and can be used eit...view more Borchi® Gol LA 10 is a pre-diluted surface active agent based on an organo-modified silicone compound. It promotes flow and levelling properties in solvent based coating systems. This product develops a medium surface tension reduction and can be used either for clearcoats or for pigmented coating systems. It is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints based on hydroxyl bearing polyacrylates and polyesters , primarily polyester melamine or epoxy systems. Borchi® Gol LA 10 furthermore controls surface levelling in physically curing finishes based on long-, middle and short chain alkyds and polyacrylates. view less | |
| WorléeKyd B 845 70% Xylene | Worlée-Chemie G.m.b.H. | WorléeKyd B 845 70% Xylene is a medium oil, very fast drying alkyd resin based on cotton seed and soya oils. It is designed for the production of high quality air and heat drying industrial enamels and car repair enamels. Due to the very good properties, W´Kyd B 845 is used as a binder for high quality industrial enamels, radiator, dipping and flow...view more WorléeKyd B 845 70% Xylene is a medium oil, very fast drying alkyd resin based on cotton seed and soya oils. It is designed for the production of high quality air and heat drying industrial enamels and car repair enamels. Due to the very good properties, W´Kyd B 845 is used as a binder for high quality industrial enamels, radiator, dipping and flow coating paints and enamels for trucks, touring cars, omnibuses, tractors and agricultural equipment. W´Kyd B 845 can also be used for nitro cellulose combinations and for air- and heat drying primers with very good elasticity. view less | |
| Terlon™ 3010 A | Lawter | Terlon™ 3010 A is a grinding and flushing alkyd with a linseed base in an alkyd known for its pigment wetting and fast, hard-drying properties. The product is considered a vital ingredient in many oil-based printing inks. The alkyd's ability to create and maintain color strength with little bronzing while providing leveling and flow...view more Terlon™ 3010 A is a grinding and flushing alkyd with a linseed base in an alkyd known for its pigment wetting and fast, hard-drying properties. The product is considered a vital ingredient in many oil-based printing inks. The alkyd's ability to create and maintain color strength with little bronzing while providing leveling and flow, ensure the product is an essential formulating tool. Terlon™ 310 A is compatible with most inks, helping to stabilizing ink formulations that don't hold up on long runs. The applications in which it has uses include sheet-fed offset, heatset offset, coldset offset, metal deco and letterpress. view less | |
| DISPEX® Ultra FA 4480 | BASF Formulation Additives | DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra FA 4480 also provides outstanding flow...view more DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra FA 4480 also provides outstanding flow properties even at high pigment load. In topcoats based on different binder types DISPEX® Ultra FA 4480 improves pigment wetting and therefore increases gloss and color intensity of the paint, especially in combination with organic pigments. This product also shows excellent results in waterbased alkyds, polyester resins as also in aqueous polyurethane emulsions. view less | |
| FLOWLEN No. 99C | GSI Exim America, Inc. | FLOWLEN No. 99C is a leveling agent that has excellent leveling effect and prevents resins from cratering with good compatibility. It appears in the form of a clear liquid and shows superior leveling effect for clear paints. This product can be applied to...view more FLOWLEN No. 99C is a leveling agent that has excellent leveling effect and prevents resins from cratering with good compatibility. It appears in the form of a clear liquid and shows superior leveling effect for clear paints. This product can be applied to thermo-setting paints, 2-packed polyester urethane, 2K acrylic urethane and UV-cured paints etc. view less | |
| BYK®-3902 P | BYK | BYK®-3902 P is a leveling additive for powder coatings. It is a polyacrylate, adsorbed on silicon dioxide. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane, and acrylics. BYK-3902 P is a new innovati...view more BYK®-3902 P is a leveling additive for powder coatings. It is a polyacrylate, adsorbed on silicon dioxide. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane, and acrylics. BYK-3902 P is a new innovative leveling additive for powder coatings. Due to its excellent dispersibility the additive improves leveling and gloss in powder coatings. It prevents impurities, craters and fish eyes. BYK-3902 P can be used in all kinds of powder coating formulations and is especially suited for thin layer systems due to its dispersibility. view less | Request Sample |
| BYK®-3932 P | BYK | BYK®-3932 P is a special leveling additive with surface protective properties for powder coatings. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane, and acrylics. | Request Sample |
| XOANONS® WE-D819B | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D819B is a polyacrylate copolymer. It offers excellent varnish compatibility, long-wave leveling ability, and anti-orange peel. No curtain break in shower coating. estimate the influence of re-coat from over-baking. | |
| XOANONS® WE-D811 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D811 is a polyacrylate copolymer. It offers excellent compatibility in varnishes, as well as long-wave leveling ability and anti-orange peel. No screen off for shower coating. It is suitable for UV cure systems. Estimate the influence of re-co...view more XOANONS® WE-D811 is a polyacrylate copolymer. It offers excellent compatibility in varnishes, as well as long-wave leveling ability and anti-orange peel. No screen off for shower coating. It is suitable for UV cure systems. Estimate the influence of re-coat from over-baking. view less | |
| XOANONS® WE-D887R | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D887R is a fluorocarbon modified polyacrylate copolymer solution. It offers excellent defoaming and foam-inhibition. This product provides long-wave leveling and prevent anti-orange-peel. Most of the applications are for coil and roll coating ...view more XOANONS® WE-D887R is a fluorocarbon modified polyacrylate copolymer solution. It offers excellent defoaming and foam-inhibition. This product provides long-wave leveling and prevent anti-orange-peel. Most of the applications are for coil and roll coating and epoxy floor paints. Not suitable for varnish and UV cure coating. view less | |
| BYK®-3900 P | BYK | BYK®-3900 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. This product is a very effective leveling and anti-crater additive for especially critica...view more BYK®-3900 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. This product is a very effective leveling and anti-crater additive for especially critical powder coating systems. It improves the tolerance of the powder coating system towards contamination which might occur during production or application of powder coatings ("post-wetting effect“). As a result BYK-3900P prevents craters, pinholes and other surface defects in powder coatings. BYK-3900P is also suitable for UV-curing powder coating systems. view less | Request Sample |
| BYK®-3931 P | BYK | BYK®-3931 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-3931 P is a very effective anti-crater additive which should be used in combination w...view more BYK®-3931 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-3931 P is a very effective anti-crater additive which should be used in combination with standard leveling additives. In especially sensitive powder coatings, BYK-3931 P enhances the effectiveness of standard additives and prevents surface craters, fish eyes and pinholes due to its air/coating interfacial activity. The result is smooth and perfect leveling. BYK-3931 P is especially recommended for binder-rich formulations which are more sensitive to cratering. view less | Request Sample |
| FLOWLEN No. 50EHF | GSI Exim America, Inc. | FLOWLEN No. 50EHF is an acrylic polymer in hydrotreated heavy naphtha and propyleneglycol monomethyl ether acetate. It has an excellent leveling effect, prevents cratering, and has a high compatibility with resins. This product is suitable for clear coati...view more FLOWLEN No. 50EHF is an acrylic polymer in hydrotreated heavy naphtha and propyleneglycol monomethyl ether acetate. It has an excellent leveling effect, prevents cratering, and has a high compatibility with resins. This product is suitable for clear coatings, and it exhibits little negative influence on gloss and transparency of paint film. It also has no Hazardous Air Pollutants (HAPs). FLOWLEN No. 50EHF appears as a colorless to yellowish liquid. view less | |
| BYK®-368 P | BYK | BYK®-368 P is a standard anti-crater and leveling additive for powder coatings to avoid fish eyes and other surface defects. It is a polyacrylate, adsorbed on silicon dioxide. This product is effective in powder coatings based on epoxy, polyester/epoxy, p...view more BYK®-368 P is a standard anti-crater and leveling additive for powder coatings to avoid fish eyes and other surface defects. It is a polyacrylate, adsorbed on silicon dioxide. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. This product acts as an anti-cratering and leveling additive for especially critical systems. It reduces orange peel by improving the leveling of the powder coating film. Pinholes, fish eyes and other surface defect are efficient avoided. BYK-368 P is also suitable for UV curing systems. view less | Request Sample |
| BYK®-350 | BYK | BYK®-350 is an acrylic leveling additive for solvent-borne and solvent-free systems. This polyacrylate shows a wide compatibility with many binder systems and works best in medium polar systems.The additive is especially suitable in baking systems, but it...view more BYK®-350 is an acrylic leveling additive for solvent-borne and solvent-free systems. This polyacrylate shows a wide compatibility with many binder systems and works best in medium polar systems.The additive is especially suitable in baking systems, but it can also be used in 2 pack polyester, acrylate or epoxy systems. In UV-Systems, BYK-350 will give a good defoaming effect beside improvement of leveling. BYK-350 is used in Industrial Coatings, Automotive OEM, Coil Coating and Can Coating systems for improvement of leveling and increase of gloss. view less | Request Sample |
| BYK®-3933 P | BYK | BYK®-3933 P is a modified polyacrylate, adsorbed on silicon dioxide. BYK-3933 P is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. Contrary to the standard leveling additives, BYK-3933 P has a multifunct...view more BYK®-3933 P is a modified polyacrylate, adsorbed on silicon dioxide. BYK-3933 P is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. Contrary to the standard leveling additives, BYK-3933 P has a multifunctional performance profile. view less | Request Sample |
| XOANONS® WE-D846R | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D846R is a polyacrylate modified copolymer solution. It has excellent varnish compatibility, and does not cause haze. This product offers excellent long-wave leveling and anti-orange peel properties. | |
| CRAYVALLAC® A-2201-M | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-2201-M is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-2201-M is suitable for use in a wide range of solvent based systems and applications. CRAYVALLAC® A-2201-M has be...view more CRAYVALLAC® A-2201-M is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-2201-M is suitable for use in a wide range of solvent based systems and applications. CRAYVALLAC® A-2201-M has been developed specifically to enhance substrate wetting and to improved leveling. As a result when compared with unadditivated coating, film effects such as craters, fisheyes, orange peel and pinholes are reduced and a superior overall appearance of the film is visible. CRAYVALLAC® A-2201-M can be used as well as an air release agent in solvent-based high solids systems applied by airless spray. view less | Request Sample |
| CRAYVALLAC® A-620-A2 | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-620-A2 is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-620-A2 is suitable for use in a wide range of solvent based systems and applications.CRAYVALLAC® A-620-A2 has bee...view more CRAYVALLAC® A-620-A2 is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-620-A2 is suitable for use in a wide range of solvent based systems and applications.CRAYVALLAC® A-620-A2 has been developed specifically to enhance substrate wetting and to improved leveling. As a result when compared with unadditivated coating, film deffects such as craters, fisheyes, orange peel and pinholes are reduced and a superior overall appearance of the film is visible. view less | Request Sample |
| BYK-352 | BYK | BYK-352 is a polyacrylate-based surface additive for solvent-borne and solvent-free systems. Standard leveling additive with air release properties. | Request Sample |
| Exilva® P 01-L | Borregaard ChemCell | Exilva® P 01-L is a microfibrillated cellulose. | |
| EFKA® FL 3785 | BASF Formulation Additives | EFKA® FL 3785 is a modified polyacylate leveling agent for solvent-based systems without fluor or silicon modifications. It improves leveling, prevents cratering, significantly improves de-aeration and does not interfere with intercoat adhesion. EFKA® FL ...view more EFKA® FL 3785 is a modified polyacylate leveling agent for solvent-based systems without fluor or silicon modifications. It improves leveling, prevents cratering, significantly improves de-aeration and does not interfere with intercoat adhesion. EFKA® FL 3785 is especially suitable for coil coatings, two-pack epoxy or polyurethane coatings, baking enamels and gelcoats. For enhanced performance in coil and two-pack coatings, EFKA® FL 3785 can be combined with EFKA® FL 3600. Compared to fluorocarbon-modified acrylates or silicone leveling additives, EFKA® FL 3785 has less influence on surface tension and more effect on de-aeration. view less | |
| Dibasic Ester | Henan Harvest Chem Co., LTD. | Dibasic Ester is a colorless, transparent liquid. This product provides leveling, saponification and hydrolyze properties. Dibasic Ester is used in coil steel coating, automobile coating, baking coating, tin plat printing coating, carpentry coating, vesse...view more Dibasic Ester is a colorless, transparent liquid. This product provides leveling, saponification and hydrolyze properties. Dibasic Ester is used in coil steel coating, automobile coating, baking coating, tin plat printing coating, carpentry coating, vessel/can coating, metal furniture coating, insulating coating, printing ink and resin applications. view less | |
| EDAPLAN® LA 403 | Munzing Chemie | EDAPLAN® LA 403 is a brown liquid suitable for all aqueous coating and printing ink systems. The polymer is compatible with all common resin systems. Advantages of using EDAPLAN® LA 403 include improved gloss and reduced haze, silicone-free, solvent-free,...view more EDAPLAN® LA 403 is a brown liquid suitable for all aqueous coating and printing ink systems. The polymer is compatible with all common resin systems. Advantages of using EDAPLAN® LA 403 include improved gloss and reduced haze, silicone-free, solvent-free, water resistance is not affected, prevents surface defects, and reduction of foam tendency. Main application areas include chemical curing systems, e.g. wood coatings, automotive, OEM and repair coatings, industrial coatings, 2K-systems, and printing inks and overprint varnishes. view less | |
| EDAPLAN® LA 411 | Munzing Chemie | EDAPLAN® LA 411 is a clear, light yellowish liquid leveling agent designed for water reducible resin systems and high solids. It improves surface properties e.g. leveling, craters, orange peel, scratch resistance and gloss. | |
| METOLAT® 1299 | Munzing Chemie | METOLAT® 1299 is a silicone-free wetting and leveling agent for water based systems. It improves surface wetting and enhances leveling of low viscous systems. It is effective in hard or soft water up to 100°C and over a wide pH range. Main applications in...view more METOLAT® 1299 is a silicone-free wetting and leveling agent for water based systems. It improves surface wetting and enhances leveling of low viscous systems. It is effective in hard or soft water up to 100°C and over a wide pH range. Main applications include detergent additive for cleaners,wallpaper removers, overprint varnishes, and plastic dispersions. view less | |
| METOLAT® 288 | Munzing Chemie | METOLAT® 288 is a colourless liquid wetting and leveling agent for aqueous systems. It provides excellent surface wetting without generating foam. The product is free of mineral oil and silicones. METOLAT® 288 provides good wetting and increases leveling,...view more METOLAT® 288 is a colourless liquid wetting and leveling agent for aqueous systems. It provides excellent surface wetting without generating foam. The product is free of mineral oil and silicones. METOLAT® 288 provides good wetting and increases leveling, especially in low viscosity systems. Main applications include overprint varnishes, container coatings (ext.), printing inks, wood coatings, and adhesives. view less | |
| KALCOL 2098 | KAO Specialties | KALCOL 2098 is a layryl alcohol in a liquid/solid form. This product has a melting range of 23.5-26.5°C. KALCOL 2098 is most commonly used as a leveling agent in powder paint manufacturing applications. | |
| KALCOL 8098 | KAO Specialties | KALCOL 8098 is a stearyl alcohol in a solid bead form. This product has a melting range of 58-62°C. KALCOL 8098 is most commonly used as a leveling agent in powder paint manufacturing applications. | |
| Siltech® C-265 | Siltech Corp. | Siltech® C-265 is a modified silicone glycol copolymer diluted in isobutanol. It provides leveling, substrate wetting, mar, and abrasion resistance to solvent based and water based paints, inks, and coatings. | |
| DABCO® 1028 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 1028 is a non-acid-blocked delayed action catalyst that is useful in microcellular applications requiring stronger back-end cure. It is a controlled-activity catalyst for 1,4-butanediol extended polyester and polyether systems. | |
| Troysol™ 380W | Arxada – Troy Corporation | Troysol™ 380W is a liquid non-ionic surface tension reducing agent designed to improve substrate wetting and film appearance. Troysol™ 380W is suggested for use in water reducible and other industrial aqueous systems where surface contamination or film im...view more Troysol™ 380W is a liquid non-ionic surface tension reducing agent designed to improve substrate wetting and film appearance. Troysol™ 380W is suggested for use in water reducible and other industrial aqueous systems where surface contamination or film imperfacetions present problems. view less | Request Sample |
| BYK®-313 | BYK | BYK®-313 is a solution of a polyester-modified polydimethylsiloxane. is a strong, highly compatible silicone for solvent-borne and baking coating systems with the following properties: strong reduction of surface tension, very good anti-cratering properties, improves substrate wetting, improves flow...view more BYK®-313 is a solution of a polyester-modified polydimethylsiloxane. is a strong, highly compatible silicone for solvent-borne and baking coating systems with the following properties: strong reduction of surface tension, very good anti-cratering properties, improves substrate wetting, improves flow and leveling of solvent-borne systems, very effective at low film thickness, increases gloss, strong increase of surface slip, FDA § 175.300 compliant, BYK-313 is a heat-resistant silicone due to the polyester modification, in baking systems, no loss in adhesion and no surface defects occur, no thermal decomposition at temperatures between 150°C and 230°C like polyether-modified silicones do, HAPS and aromatic-free. view less | Request Sample |
| Dynoadd® F-1 | Dynoadd by Dynea | Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are ...view more Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-1 has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-1 is an excellent choice in multiple-layer coatings. Dynoadd® F-1 has applications in industrial coatings, coil coatings, automotive OEM, printing inks, and woods coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| DOUBLEMER® 013 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 013 is an acrylic monomer which has several advantages like low viscosity, low skin irritation index (PII=0.5), high reactivity and good heat resistance. When used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB), DOUBLEMER® 013 will exhibit substrate wetting and flow...view more DOUBLEMER® 013 is an acrylic monomer which has several advantages like low viscosity, low skin irritation index (PII=0.5), high reactivity and good heat resistance. When used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB), DOUBLEMER® 013 will exhibit substrate wetting and flow properties, low viscosity and good stability in formulation. Because of its acrylic functional group, after curing, this product will get into the backbone of substrates by photo free radical polymerization. Because of its chemical structure, it tend to be dissolved in water. It could replace NVP in most formulations, as well as water soluble UV application. Formulated UV/EB curable products containing DOUBLEMER® 013 may be applied as a reactivity solvent or adhesive water borne UV formulation. This product is a clear to yellowish liquid. view less | |
| EcoFlame B-641TC | Unibrom Corp. | EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is tailor-made for coating and textile fields with disperse-ability and flow...view more EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is tailor-made for coating and textile fields with disperse-ability and flow-ability. EcoFlame B-641TC has a varying particle size of 1-2, 3-5, and 7-13, it also has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, and a purity of 99% min. view less | |
| MB-311 | Pioneer Chemicals Co., Ltd. | MB-311, in the form of a bead, is a copolymer of butyl methacrylate that offers good durability and weather-ability, and it also offers good flexibility, pigment dispersion, better flow-ability, and high gloss due to its low molecular weight of 30,000 g/m...view more MB-311, in the form of a bead, is a copolymer of butyl methacrylate that offers good durability and weather-ability, and it also offers good flexibility, pigment dispersion, better flow-ability, and high gloss due to its low molecular weight of 30,000 g/mol. It is easily soluble in long-chain alcohol, esters, ketones, aromatic hydrocarbons, and chlorinated solvent. MB-311 is normally used in varnish coatings, ceramic inks, and top coatings. It has a moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.13 to 0.17. view less | |
| Ottopol SX-100 | Gellner Industrial, LLC | Ottopol SX-100 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require a hard film. Due to the internally cross-linking mechanism, Ottopol SX-100's block and scuff resistance is improved over conventional vehicles. It also provides excellent resolubility properties for flexo and gravure printing applications. The flow...view more Ottopol SX-100 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require a hard film. Due to the internally cross-linking mechanism, Ottopol SX-100's block and scuff resistance is improved over conventional vehicles. It also provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of this product provides a high gloss finish and non-curling properties on paper. view less |
