| EPS® 2224 | EPS Materials | EPS® 2224 is an acrylic emulsion offering excellent alkali and water resistance, dirt pick-up resistance and flexibility. EPS® 2224 can be used in sloped roof formulations which, when properly formulated with EPS® 9147, meet ASTM D6083 specifications. It is also an excellent choice for both clear and pigmented caulk and sealant...view more EPS® 2224 is an acrylic emulsion offering excellent alkali and water resistance, dirt pick-up resistance and flexibility. EPS® 2224 can be used in sloped roof formulations which, when properly formulated with EPS® 9147, meet ASTM D6083 specifications. It is also an excellent choice for both clear and pigmented caulk and sealant formulations that meet ASTM C834 specifications. view less | Request Sample |
| DOUBLEMER® DEGDMA | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® DEGDMA is an excellent reactive difunctional acrylic ester, with low viscosity and low volatility. This clear liquid exhibits low skin irritation; good abrasion, chemical, and water resistance; good hardness and impact strength; and excellent dilute efficiency. DOUBLEMER® DEGDMA is a good reactive diluent for use in electronic photoresists, solder masks, photo-polymers, adhesives, coatings, dental polymers, and sealant...view more DOUBLEMER® DEGDMA is an excellent reactive difunctional acrylic ester, with low viscosity and low volatility. This clear liquid exhibits low skin irritation; good abrasion, chemical, and water resistance; good hardness and impact strength; and excellent dilute efficiency. DOUBLEMER® DEGDMA is a good reactive diluent for use in electronic photoresists, solder masks, photo-polymers, adhesives, coatings, dental polymers, and sealant. view less | |
| FS3-3730 | NuSil Silicone Technology 1 | FS3-3730 is a translucent, one-part, adhesive/sealant that has 100 mole % flouorosilicone. It is strong and will bond aggressively to most surfaces. This product can be utilized for bonding and sealing applications that require solven and/or fuel resistan...view more FS3-3730 is a translucent, one-part, adhesive/sealant that has 100 mole % flouorosilicone. It is strong and will bond aggressively to most surfaces. This product can be utilized for bonding and sealing applications that require solven and/or fuel resistance. It can also be used for protecting or bonding hardware components that have been exposed to gasoline or aviation fuels. view less | |
| R1-3930-11 | NuSil Silicone Technology 1 | R1-3930-11 is a gray fluorosilicone, adhesive, sealant, and coating that bonds aggressively to most surfaces. This product can be utilized for sealing, coating, and bonding applications that require solvent and/or fuel resistance. It can also be used for ...view more R1-3930-11 is a gray fluorosilicone, adhesive, sealant, and coating that bonds aggressively to most surfaces. This product can be utilized for sealing, coating, and bonding applications that require solvent and/or fuel resistance. It can also be used for bonding or protecting hardware components exposed to gasoline or aviation fuels. It can be further dispersed for spraying applications. view less | |
| FS-3730 | NuSil Silicone Technology 1 | FS-3730 is a white, one-part, fluorosilicone adhesive/sealant that can be cured at room temperture and has 100 mole % fluorosilicone. This can provide sufficient protection or bonding of components that are exposed to aviation fuels or gasoline. It can al...view more FS-3730 is a white, one-part, fluorosilicone adhesive/sealant that can be cured at room temperture and has 100 mole % fluorosilicone. This can provide sufficient protection or bonding of components that are exposed to aviation fuels or gasoline. It can also be used for sealing and bonding applications that require solvent and/or fuel resistance, and it bonds aggressively to most surfaces. view less | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF Corporation, Chemical Intermediates | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant...view more Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . view less | |
| CV2-2566 | NuSil Silicone Technology 1 | CV2-2566 is a two-part, thixotropic red RTV silicone that can be used as a potting material, sealant, caulking, or adhesive in space and electronic applications where a high vacuum environment is encountered. This is a versatile product because in can fun...view more CV2-2566 is a two-part, thixotropic red RTV silicone that can be used as a potting material, sealant, caulking, or adhesive in space and electronic applications where a high vacuum environment is encountered. This is a versatile product because in can function within a broad operating temperature range. It can also be used to bond solar cells to solar array panels. view less | |
| 4-Vinyl-1-Cyclohexene 1,2-Epoxide TTAII | PhibroChem | 4-Vinyl-1-Cyclohexene 1,2-Epoxide TTAII is a colorless, transparent liquid. Reactive through its vinyl or epoxide functionalities, it is useful as a chemical intermediate. It also serves as reactive diluent where high crosslink density is not critical. This product is used in addition polymerization reaction in luminescent materials, electronic chips encapsulant, sealant...view more 4-Vinyl-1-Cyclohexene 1,2-Epoxide TTAII is a colorless, transparent liquid. Reactive through its vinyl or epoxide functionalities, it is useful as a chemical intermediate. It also serves as reactive diluent where high crosslink density is not critical. This product is used in addition polymerization reaction in luminescent materials, electronic chips encapsulant, sealant, coupling agent, organic silicon synthesis, and microelctronics. view less | Request Sample |
| BS-1C-A13 Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | BS-1C-A13 offers high gelling efficiency over low, medium, and high polarity organic liquids. It offers ease of incorporation and dispersion, consistent rheology and thixotropy development, and good anti-sagging and anti-sediment properties. This product is recommended for anti-corrosion paints, industrial paints, non-solvent epoxy paints, putties and sealant...view more BS-1C-A13 offers high gelling efficiency over low, medium, and high polarity organic liquids. It offers ease of incorporation and dispersion, consistent rheology and thixotropy development, and good anti-sagging and anti-sediment properties. This product is recommended for anti-corrosion paints, industrial paints, non-solvent epoxy paints, putties and sealant, polyester paints, solvent epoxy paints, adhesives, and varnishes. view less | |
| FS-3730-2 | NuSil Silicone Technology 1 | FS-3730-2 is a black adhesive/sealant that is based on a fluorosilicone polymer with 100 mole % fluorosilicone. It can be utilized to bond or protect hardware components that are exposed to aviation fuels or gasoline. This product can also be used for sea...view more FS-3730-2 is a black adhesive/sealant that is based on a fluorosilicone polymer with 100 mole % fluorosilicone. It can be utilized to bond or protect hardware components that are exposed to aviation fuels or gasoline. This product can also be used for sealing or bonding applications requiring fuel and/or solvent resistance. Another strong property is that it bonds aggressively to most surfaces. view less | |
| SiSiB® PC5440 | SiSiB SILICONES | SiSiB® PC5440 is a colorless transparent liquid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant...view more SiSiB® PC5440 is a colorless transparent liquid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| CV-1500 | NuSil Silicone Technology 1 | CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperatur...view more CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperature, humidity, radiation, thermal and mechanical stress. This adhesive is well suited for form-in-place conductive gaskets and attaching heating coils to solar collector plates. view less | |
| RHOPLEX 928 | Univar Solutions | RHOPLEX 928 is a high-solids acrylic copolymer emulsion that can be used as a binder for both clear and pigmented sealant formulations. Clear sealants exhibit exceptional clarity, rate of clarity development and water resistance. Pigmented sealants can be...view more RHOPLEX 928 is a high-solids acrylic copolymer emulsion that can be used as a binder for both clear and pigmented sealant formulations. Clear sealants exhibit exceptional clarity, rate of clarity development and water resistance. Pigmented sealants can be formulated to meet ASTM C834 and to have the paint crack resistance properties painters require. Both clear and pigmented sealants have excellent adhesion to a wide variety of substrates. . view less | Request Sample |
| Thetawet™ FS-8150 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8150, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealant applications. This product is sparingly water soluble and has a pH of 6.0 +/- 1.0 in a 1% aq...view more Thetawet™ FS-8150, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealant applications. This product is sparingly water soluble and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. It has a boiling point of approximately 100 degrees Celsius and is designed for use in VOC-sensitive systems. view less | Request Sample |
| R-1505 | NuSil Silicone Technology 1 | R-1505 is a non-corrosive, static dissipative RTV silicone that cures at room temperature to form a flexible, resilient, conductive bond or seal. It is best used for applications that require a non-corrosive adhesive/sealant. This product provides protect...view more R-1505 is a non-corrosive, static dissipative RTV silicone that cures at room temperature to form a flexible, resilient, conductive bond or seal. It is best used for applications that require a non-corrosive adhesive/sealant. This product provides protection from extremes in humidity, temperature, radiation, thermal stress and mechanical stress. It can also be utilized as a shielding for RFI and EMI in electronic applications. view less | |
| PLACCEL 303 | Daicel (U.S.A.), Inc. | PLACCEL 303 is a polycaplolactone triol and its molecular weight is 310. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL 303 is a raw material for CASE (Coating, Adhesion, Sealant...view more PLACCEL 303 is a polycaplolactone triol and its molecular weight is 310. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL 303 is a raw material for CASE (Coating, Adhesion, Sealant, Elastomer). It can be used as modifying agents or cross linking agent for polyurethane, paint resin, epoxy resin and so on. view less | |
| PLACCEL 308 | Daicel (U.S.A.), Inc. | PLACCEL 308 is a polycaplolactone triol and its molecular weight is 850. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL 305 is a raw material for CASE (Coating, Adhesion, Sealant...view more PLACCEL 308 is a polycaplolactone triol and its molecular weight is 850. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL 305 is a raw material for CASE (Coating, Adhesion, Sealant, Elastomer). It can be used as modifying agents or cross linking agent for polyurethane, paint resin, epoxy resin and so on. view less | |
| PLACCEL 312 | Daicel (U.S.A.), Inc. | PLACCEL 312 is a polycaplolactone triol and its molecular weight is 1250. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL 312 is a raw material for CASE (Coating, Adhesion, Sealant...view more PLACCEL 312 is a polycaplolactone triol and its molecular weight is 1250. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL 312 is a raw material for CASE (Coating, Adhesion, Sealant, Elastomer). It can be used as modifying agents or cross linking agent for polyurethane, paint resin, epoxy resin and so on. view less | |
| PLACCEL 320 | Daicel (U.S.A.), Inc. | PLACCEL 320 is a polycaplolactone triol and its molecular weight is 2000. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL 320 is a raw material for CASE (Coating, Adhesion, Sealant...view more PLACCEL 320 is a polycaplolactone triol and its molecular weight is 2000. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL 320 is a raw material for CASE (Coating, Adhesion, Sealant, Elastomer). It can be used as modifying agents or cross linking agent for polyurethane, paint resin, epoxy resin and so on. view less | |
| Hubercarb® G35 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G35 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent...view more Hubercarb® G35 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® G35 can also improve the physical and rheological properties of powder coatings. view less | |
| Hubercarb® G8 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G8 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....view more Hubercarb® G8 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® G8 can also improve the physical and rheological properties of powder coatings. view less | |
| Hubercarb® M3 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....view more Hubercarb® M3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® M3 can also improve the physical and rheological properties of powder coatings. view less | |
| Hubercarb® M4 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M4 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....view more Hubercarb® M4 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® M4 can also improve the physical and rheological properties of powder coatings. view less | |
| Hubercarb® M6 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....view more Hubercarb® M6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® M6 can also improve the physical and rheological properties of powder coatings. view less | |
| Hubercarb® Q6 Calcium Carbonate | Huber Engineered Materials | Hubercarb® Q6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....view more Hubercarb® Q6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® Q6 can also improve the physical and rheological properties of powder coatings. view less | |
| Hubercarb® G6 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent...view more Hubercarb® G6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® G6 can also improve the physical and rheological properties of powder coatings. view less | |
| SiSiB® PC5433 | SiSiB SILICONES | SiSiB® PC5433 is a colorless clear liquid. It is the isopropyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant...view more SiSiB® PC5433 is a colorless clear liquid. It is the isopropyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| CV-2900 | NuSil Silicone Technology 1 | CV-2900 is a non-corrosive silicone adhesive that is designed for enhanced performance in extreme low and high temperatures. It can be used as a bond and sealant for applications such as overhead or vertical joints that require a non-slumping and one-part...view more CV-2900 is a non-corrosive silicone adhesive that is designed for enhanced performance in extreme low and high temperatures. It can be used as a bond and sealant for applications such as overhead or vertical joints that require a non-slumping and one-part material. It can also be utilized as an adhesive , caulking or potting material in electronics/space applications that require minimal outgassing and provides protection from condensation in sensitive devices. view less | |
| R-2560 | NuSil Silicone Technology 1 | R-2560 is a two part, pourable, red RTV silicone elastomer that has a base of dimethyl diphenyl silicone copolymer. It can withstand extreme temperatures and can be used for applications that require an operating temperature range of 115°C to 260°C (-175°F to 500°F). This product can be used for thermal insulating as a firewall sealant...view more R-2560 is a two part, pourable, red RTV silicone elastomer that has a base of dimethyl diphenyl silicone copolymer. It can withstand extreme temperatures and can be used for applications that require an operating temperature range of 115°C to 260°C (-175°F to 500°F). This product can be used for thermal insulating as a firewall sealant, or as an ablative coating in missiles, rockets, aircraft and launch equipment. view less | |
| PLACCEL P3403 | Daicel (U.S.A.), Inc. | PLACCEL P3403 is polyetherester triol and its molecular weight is 4000. It is manufactured from PPG triol and epsilon-caprolactone by ring-opening polymerization. This product is characterized by its high urethane reactivity because secondary hydroxyl group in PPG is modified by epsilon-caprolactone to make terminal primary hydroxyl group. PLACCEL P3403 can be used as modifying agent for polyurethane, such as urethane adhesive, elastomer, sealant...view more PLACCEL P3403 is polyetherester triol and its molecular weight is 4000. It is manufactured from PPG triol and epsilon-caprolactone by ring-opening polymerization. This product is characterized by its high urethane reactivity because secondary hydroxyl group in PPG is modified by epsilon-caprolactone to make terminal primary hydroxyl group. PLACCEL P3403 can be used as modifying agent for polyurethane, such as urethane adhesive, elastomer, sealant, and artificial leather and so on. view less | |
| Triethyleneglycol di vinyl ether, DVE-3 | BASF Corporation, Chemical Intermediates | Triethylenglycol divinyl ether is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant...view more Triethylenglycol divinyl ether is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Triethylenglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. No labeling, no risk phrase. Triethylenglycol divinyl ether is used for UV-coatings (wood, printing inks) and UV adhesives. view less | |
| RHOPLEX A-920 | Univar Solutions | RHOPLEX A-920 is a high solids, high-performance acrylic latex binder designed for pigmented caulks and sealants. Due to the self-thickening nature of this binder, this product has a lower thickener demand than other sealant binders. With its high pigment...view more RHOPLEX A-920 is a high solids, high-performance acrylic latex binder designed for pigmented caulks and sealants. Due to the self-thickening nature of this binder, this product has a lower thickener demand than other sealant binders. With its high pigment binding capacity, this product can be successfully formulated into a broad range of products – from economical non-specification caulks to high-performance sealants meeting ASTM C920, Class 25. Sealants formulated with this product exhibit excellent durability and exceptional adhesion. view less | Request Sample |
| CV3-1142 | NuSil Silicone Technology 1 | CV3-1142 is a one-part translucent material that is also a non-slumping silicone RTV. It is best used as a sealant, caulk, adhesive or potting material in electrical and space applications that require low outgassing, and minimal volatile condensables und...view more CV3-1142 is a one-part translucent material that is also a non-slumping silicone RTV. It is best used as a sealant, caulk, adhesive or potting material in electrical and space applications that require low outgassing, and minimal volatile condensables under extreme operating conditions. This product also provides corrosion protection for sensitive circuits such as connectors, switches and other electrical components. It can also be utilized in bonding and sealing applications that require a non-slumping material. view less | |
| Doublecure® EPD | Double Bond Chemical Ind., Co., Ltd. | Doublecure® EPD is an efficient amine synergist that is generally used with a photosensitizer to cure coatings that are polymerized by ultraviolet radiation. Photosensitizers that are commonly used in conjunction with it include Doublecure ® ITX and MP-L. Doublecure® EPD can be used for printing ink, decorative coatings for metal cans and food cartons, adhesive, sealant...view more Doublecure® EPD is an efficient amine synergist that is generally used with a photosensitizer to cure coatings that are polymerized by ultraviolet radiation. Photosensitizers that are commonly used in conjunction with it include Doublecure ® ITX and MP-L. Doublecure® EPD can be used for printing ink, decorative coatings for metal cans and food cartons, adhesive, sealant, pressure transfer sheets, photoresist dry film and metal primers. This product is a white crystalline powder with a slight acetic acid smell. view less | |
| SiSiB® PC2510 | SiSiB SILICONES | SiSiB® PC2510, or gamma-Ureidopropyltrimethoxysilane, is a clear amber liquid. It is a 100% active ureido silane that may be used to promote adhesion between a range of resins and substrates, fillers, or reinforcements. It has good adhesive and sealant a...view more SiSiB® PC2510, or gamma-Ureidopropyltrimethoxysilane, is a clear amber liquid. It is a 100% active ureido silane that may be used to promote adhesion between a range of resins and substrates, fillers, or reinforcements. It has good adhesive and sealant adhesion to oil metals; it can improve adhesion between the inorganic filler or fiber and the polymer; and can be used for glass fiber sizes and finishes, wool insulation resin binders, numerous primers, foundry sand binders, adhesives, sealants and abrasive grinding wheel binders. view less | |
| SiSiB® PC5410 | SiSiB SILICONES | SiSiB® PC5410 is a colorless or light yellowish, low-viscosity liquid with a SiO2 content of 39.5%. It is the methyl ester of orthosilicic acid. It can be used as an inorganic binder for refractory fillers and pigments, like precision investing castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; a starting material for sol-gel process; as a crosslinking agent for silicone sealant...view more SiSiB® PC5410 is a colorless or light yellowish, low-viscosity liquid with a SiO2 content of 39.5%. It is the methyl ester of orthosilicic acid. It can be used as an inorganic binder for refractory fillers and pigments, like precision investing castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| CV7-1142-1 | NuSil Silicone Technology 1 | CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broa...view more CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broad operating temperature range so it can withstand hot and cold conditions. It also can be used for sealing openings in modules or housings where grooves or other configurations require a non-flowable to limited flow material. view less | |
| SiSiB® PC5420 | SiSiB SILICONES | SiSiB® PC5420 is a colorless, low-viscosity liquid with an SiO2 content of 28.5%. It is the ethyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant...view more SiSiB® PC5420 is a colorless, low-viscosity liquid with an SiO2 content of 28.5%. It is the ethyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| PLACCEL 305 | Daicel (U.S.A.), Inc. | PLACCEL 305 is polycaplolactone triol and its molecular weight is 550. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 305 is raw material of CASE (Coating, Adhesion, Sealant...view more PLACCEL 305 is polycaplolactone triol and its molecular weight is 550. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 305 is raw material of CASE (Coating, Adhesion, Sealant Elastomer). It can be used as modifying agents or cross linking agent such as polyurethane, paint resin, and epoxy resin. Flexibility can be given to various resins by using PLACCEL 305. view less | |
| PLACCEL 309 | Daicel (U.S.A.), Inc. | PLACCEL 309 is polycaplolactone triol and its molecular weight is 900. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 309 is raw material of CASE (Coating, Adhesion, Sealant...view more PLACCEL 309 is polycaplolactone triol and its molecular weight is 900. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 309 is raw material of CASE (Coating, Adhesion, Sealant Elastomer). It can be used as modifying agents or cross linking agent such as polyurethane, paint resin, and epoxy resin. Flexibility can be given to various resins by using PLACCEL 309. view less | |
| SPUR+ 1012 prepolymer | Momentive | SPUR+ 1012 prepolymer is a silylated prepolymer that does not rely on an isocyanate curing reactions. Additionally, it is formulated without the use of phthalate-based plasticizers, and in sealant formulations, using it as the base resin or in combination...view more SPUR+ 1012 prepolymer is a silylated prepolymer that does not rely on an isocyanate curing reactions. Additionally, it is formulated without the use of phthalate-based plasticizers, and in sealant formulations, using it as the base resin or in combination with SPUR+ 1015 prepolymer, extremely low modulus values can be attained. This moisture curable resin is an excellent candidate to consider in formulating construction sealants requiring rapid cure, good water resistance, high flexibility and adhesion to most construction substrate materials such as concrete, marble and glass. view less | |
| SiSiB® PC5411 | SiSiB SILICONES | SiSiB® PC5411, also called Methyl silicate 51, is a colorless transparent liquid, containing 51% silica (SiO2) by mass. It is a hydrolyzed and oligomerized form of methyl silicate. It can be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant...view more SiSiB® PC5411, also called Methyl silicate 51, is a colorless transparent liquid, containing 51% silica (SiO2) by mass. It is a hydrolyzed and oligomerized form of methyl silicate. It can be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant...view more CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). view less | |
| SiSiB® PC5430 | SiSiB SILICONES | SiSiB® PC5430, also called n-Propyl Silicate, is a colorless transparent liquid. It is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins; as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant...view more SiSiB® PC5430, also called n-Propyl Silicate, is a colorless transparent liquid. It is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins; as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant...view more Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. view less | |
| PLACCEL 305T | Daicel (U.S.A.), Inc. | PLACCEL 305T is polycaplolactone triol and its molecular weight is 550. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon- caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 305T is raw material of CASE (Coating, Adhesion, Sealant...view more PLACCEL 305T is polycaplolactone triol and its molecular weight is 550. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon- caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 305T is raw material of CASE (Coating, Adhesion, Sealant, Elastomer). It can be used as modifying agents or cross linking agent such as polyurethane, paint resin, and epoxy resin. In addition, it can improve hydrolytic stability than using PLACCEL 305 by its controlled low acid value. view less | |
| Petroleum Resin-C5 | Qingdao Sun Chemical Corporation Limited | Petroleum Resin-C5 is mad of transparent and light yellow granules with solubility, compatibility, adhesiveness, resistance for water, weather and heat it possesses. It stands chemically stable with things, such as acid, alkali. Ideal for use in rubber, paintings, and adhesives. Is also widely used in fields of oil ink, paper bonding, sealant...view more Petroleum Resin-C5 is mad of transparent and light yellow granules with solubility, compatibility, adhesiveness, resistance for water, weather and heat it possesses. It stands chemically stable with things, such as acid, alkali. Ideal for use in rubber, paintings, and adhesives. Is also widely used in fields of oil ink, paper bonding, sealant etc. Petroleum Resin-C5 has a softening point of 100+/-5, an acid value of 0.5%mg KOH/g max., an iodine value (g I2/100g) of 20/120, and an ash value of 0.1% max. view less | |
| XIAMETER® OFS-6020 Silane | Univar Solutions | XIAMETER® OFS-6020 Silane possesses both organic and inorganic reactivity. XIAMETER OFS-6020 Silane can react with organic polymers and glass or other inorganic mineral surfaces. It has been found to be an effective coupling agent for clay reinforced elas...view more XIAMETER® OFS-6020 Silane possesses both organic and inorganic reactivity. XIAMETER OFS-6020 Silane can react with organic polymers and glass or other inorganic mineral surfaces. It has been found to be an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber. The silane-treated clay provides improvement in both physical and dynamic properties compared to similar cured elastomers containing untreated clay. May also be used as an additive to improve the performance of these types of thermoset resins when they are used as mineral binders in foundry and abrasive composite applications. view less | Request Sample |
| XIAMETER® OFS-6070 Silane | Univar Solutions | XIAMETER® OFS-6070 Silane is an alkoxy silane supplied as a low-viscosity liquid that is used to make inorganic surfaces hydrophobic. It is also used as a pigment treatment to aid in dispersion. | Request Sample |
| Bisomer® IDMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. Th...view more Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. This product acidity (methacrylic acid) of 0.01% max., an inhibitor (MEHQ) content of 75-125ppm, and an assay (GC) of 97.0% min. Bisomer® IDMA is a useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants, high solids acrylic polyols for automotive coatings and industrial coatings. It offers low viscosity and low odour combined with low shrinkage on polymerisation. It is non-toxic, non-irritating and is not a suspected sensitiser. view less | |
| Silane Coupling Agent KH-602 | Zhejiang Feidian Chemical Co., Ltd. | KH-602 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing good adhesion, superior elongation, and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass/mineral and metal surfaces-reinforcements, fillers/substrates-and resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. Its reduced alkoxy functionality might also be useful in waterborne systems such as latex coatings, adhesives and sealant...view more KH-602 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing good adhesion, superior elongation, and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass/mineral and metal surfaces-reinforcements, fillers/substrates-and resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. Its reduced alkoxy functionality might also be useful in waterborne systems such as latex coatings, adhesives and sealants, providing lower reactivity and therefore higher stability in the aqueous environment. view less | |
| Bisomer® C13MA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) of > 99.0%, a molecular weight (av) of 268g/mol, and an inhibitor (MEHQ) content of 75-125ppm. It is extremely hydrophobic and offers a low Glass Transition Temperature (Tg), hence it is an excellent flexibilising co-monomer in adhesive and sealant applications. Bisomer® C13MA is a particularly useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealant...view more Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) of > 99.0%, a molecular weight (av) of 268g/mol, and an inhibitor (MEHQ) content of 75-125ppm. It is extremely hydrophobic and offers a low Glass Transition Temperature (Tg), hence it is an excellent flexibilising co-monomer in adhesive and sealant applications. Bisomer® C13MA is a particularly useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants and high solids acrylic polyols for automotive coatings and industrial coatings. It offers a low viscosity and low odour combined with low shrinkage on polymerisation. view less | |
| Silane Coupling Agent KH-551 | Zhejiang Feidian Chemical Co., Ltd. | KH-551 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler, or reinforcement and resins that react with the amino group. It is especially recommended to thermoplastic and thermosetting resins such as epoxy, PBT, and polyurethane. It can improve reinforced plastic's physical properties and electric properties as flexural strength, compression strength, and shear strength. KH-551 also can improve the dispersion and wet ability of filler in the high molecular materials. It is an excellent promoter of adhesion and sealant...view more KH-551 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler, or reinforcement and resins that react with the amino group. It is especially recommended to thermoplastic and thermosetting resins such as epoxy, PBT, and polyurethane. It can improve reinforced plastic's physical properties and electric properties as flexural strength, compression strength, and shear strength. KH-551 also can improve the dispersion and wet ability of filler in the high molecular materials. It is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. view less | |
| PChem® BM65C | Pioneer Chemicals Co., Ltd. | PChem® BM65C, in the form of a powder, is a copolymer of methyl methacrylate that is a multi-usage thermoplastic acrylic resin with durability, high purity, salt spray resistance, and excellent weather-ability. It is easily soluble in numerous organic solvents such as chlorinated solvents, ketones, aromatic hydrocarbons, esters, and it has excellent compatibility with other film forming resins, such as plasticizer, cellulose, and vinyl resins. PChem® BM65C has application in tile paint, concrete sealant...view more PChem® BM65C, in the form of a powder, is a copolymer of methyl methacrylate that is a multi-usage thermoplastic acrylic resin with durability, high purity, salt spray resistance, and excellent weather-ability. It is easily soluble in numerous organic solvents such as chlorinated solvents, ketones, aromatic hydrocarbons, esters, and it has excellent compatibility with other film forming resins, such as plasticizer, cellulose, and vinyl resins. PChem® BM65C has application in tile paint, concrete sealant/hardener, color concentrates, architecture anti-corrosive coatings, road marking, and marine and container coatings. It has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 8.0 mgKOH/g, and an inherent viscosity of 0.19. view less | |
| SiSiB® PC1110 | SiSiB SILICONES | SiSiB® PC1110 is a colorless transparent liquid. It is an amino-functional silane that may be used in applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can be used in thermoplastic resins and thermosetting resins such as epoxy, PBT, polyurethane etc.; to improve reinforced plastic’s physical properties and electric properties as flexural strength, compression strength and shear strength; improve the dispersion and wet ability of filler in the high molecular materials; promote adhesion and sealant (such as polyurethane, epoxy, and phenol); improve the wet resistance and mechanical performance in the glass wool and FRP products when added in to phenol resins; promote adhesion in RTV silicones and other hybrid sealants including SPURSM technology, particularly for difficult substrates such as ABC, PVC ad Poly Shyrene; and as a component in primer systems for hybrid and polyurethane sealant...view more SiSiB® PC1110 is a colorless transparent liquid. It is an amino-functional silane that may be used in applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can be used in thermoplastic resins and thermosetting resins such as epoxy, PBT, polyurethane etc.; to improve reinforced plastic’s physical properties and electric properties as flexural strength, compression strength and shear strength; improve the dispersion and wet ability of filler in the high molecular materials; promote adhesion and sealant (such as polyurethane, epoxy, and phenol); improve the wet resistance and mechanical performance in the glass wool and FRP products when added in to phenol resins; promote adhesion in RTV silicones and other hybrid sealants including SPURSM technology, particularly for difficult substrates such as ABC, PVC ad Poly Shyrene; and as a component in primer systems for hybrid and polyurethane sealants. view less | |
| SiSiB® PC1220 | SiSiB SILICONES | SiSiB® PC1220 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing adhesion and elougation and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass, mineral and metal surfaces; as reinforcements, fillers and substrates; and with resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. It can be used in waterborne systems such as latex coatings, adhesives, and sealants; as an adhesion promoters in polysulfide, polyvinyl chloride plastisol, silicone two-part urethanes and epoxy adhesives and sealants; as an additive for cold-curing phenolic and furan foundry resins to improve the flexural strength of the sand-resin composites; as a starting material in the synthesis of amino-functional silicones; or as an adhesion promoters in one-part silylated urethane adhesives and sealant...view more SiSiB® PC1220 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing adhesion and elougation and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass, mineral and metal surfaces; as reinforcements, fillers and substrates; and with resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. It can be used in waterborne systems such as latex coatings, adhesives, and sealants; as an adhesion promoters in polysulfide, polyvinyl chloride plastisol, silicone two-part urethanes and epoxy adhesives and sealants; as an additive for cold-curing phenolic and furan foundry resins to improve the flexural strength of the sand-resin composites; as a starting material in the synthesis of amino-functional silicones; or as an adhesion promoters in one-part silylated urethane adhesives and sealants. view less | |
| POLYVEST® eCO 130 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 130 Bio brings the same well-known performance but has reduced carbon emissions. The apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 130 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 130 Bio is used in adhesive and sealant...view more POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 130 Bio brings the same well-known performance but has reduced carbon emissions. The apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 130 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 130 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizers for rubber compounds, binders for recycled rubber compounds, release agents for polyurethane foams, cell openers for polyurethane foams, defoamers, modifiers of resin systems, a modifier of vegetable oils, binder for dusty and dry quartz sand, and many more. view less | Request Sample |
| Incozol LV | Incorez Ltd. | Incozol LV is a reactive diluent designed to help producers of polyurethane coatings and sealants attain low VOC systems. It is used in the formulation of two component coatings where Incozol LV replaces a portion of the polyol component, for example, aut...view more Incozol LV is a reactive diluent designed to help producers of polyurethane coatings and sealants attain low VOC systems. It is used in the formulation of two component coatings where Incozol LV replaces a portion of the polyol component, for example, automotive refinish and OEM coatings. Other uses include high solids PU coatings for boats, industrial maintenance, aircraft, automotive sealants, anti-graffiti lacquers and waterproof coatings. view less | |
| SILLITIN Z 86 | Hoffmann Mineral | SILLITIN Z 86 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| D-31 | BlueSky Chemical Co., Ltd. | D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants. | |
| Andisil 187 Silane | AB Specialty Silicones | Andisil 187 Silane is an epoxy functional silane coupling agent. It is used for unsaturated polyester-fiberglass composites and for polysulfide/polyurethane caulks & sealants. Andisil 187 Silane can be used in waterborne acrylic sealants and epoxy coating...view more Andisil 187 Silane is an epoxy functional silane coupling agent. It is used for unsaturated polyester-fiberglass composites and for polysulfide/polyurethane caulks & sealants. Andisil 187 Silane can be used in waterborne acrylic sealants and epoxy coatings. view less | |
| REAXIS® C325 | Reaxis Inc. | REAXIS® C325 is a yellowish liquid catalyst of high activity used in the condensation cure of silicones and the production of polyurethanes. REAXIS® C325 is well suited for use as a catalyst in the manufacturing of RTV silicone adhesives and sealants, pol...view more REAXIS® C325 is a yellowish liquid catalyst of high activity used in the condensation cure of silicones and the production of polyurethanes. REAXIS® C325 is well suited for use as a catalyst in the manufacturing of RTV silicone adhesives and sealants, polyurethane elastomers, adhesive and sealants and coatings. view less | |
| Aqueous Aminoalkyl Silicone Solutions | Dalian Onichem Co., Ltd. | Aqueous Aminoalkyl Silicone Solutions is used for waterborne coatings, adhesives, sealants and primers. | Request Sample |
| SPUR+ 1015 prepolymer | Momentive | SPUR+ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and constructi...view more SPUR+ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and construction applications where good elastic recovery is required. view less | |
| SiSiB® PC7910 | SiSiB SILICONES | SiSiB® PC7910 is an almost colorless or yellowish transparent liquid. It hydrolyzes upon contact with moisture. It is used as a raw material for acetoxy crosslinking RTV-1 sealants. | |
| D-33 | BlueSky Chemical Co., Ltd. | D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...view more D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. view less | |
| SPUR+ 1050 prepolymer | Momentive | SPUR+ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and adhesives in ind...view more SPUR+ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and adhesives in industrial and transportation applications where higher tensile strength is required. view less | |
| SR209 | Sartomer Americas | SR209 is a low viscosity, non-corrosive, and difunctional monomer with low vapor pressure and fast cure response for use in free radical polymerization. Suggested applications include: photopolymers, photoresists electronics, solder masks electronics, plastisols, elastomers, anaerobic adhesives, sealants, concrete polymers and sealant...view more SR209 is a low viscosity, non-corrosive, and difunctional monomer with low vapor pressure and fast cure response for use in free radical polymerization. Suggested applications include: photopolymers, photoresists electronics, solder masks electronics, plastisols, elastomers, anaerobic adhesives, sealants, concrete polymers and sealants. view less | |
| D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...view more D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. view less | |
| SPUR+ 1060 prepolymer | Momentive | SPUR+ 1060 prepolymer is a plasticizer-free, ethoxysilane-modified resin used in the manufacture of one-part moisture-curing adhesives and sealants. It is an excellent material of choice as a base resin for medium modulus adhesives and sealants that serve...view more SPUR+ 1060 prepolymer is a plasticizer-free, ethoxysilane-modified resin used in the manufacture of one-part moisture-curing adhesives and sealants. It is an excellent material of choice as a base resin for medium modulus adhesives and sealants that serve a range of applications, particularly where HAPs emissions are a significant factor. view less | |
| 3-Glycidoxypropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Glycidoxypropyltriethoxysilane is an adhesion promoter in polysulfide, urethane, epoxy and acrylic caulks, sealants, adhesives and coatings. | Request Sample |
| Rheotech™ 146 | Arkema Rheology & Specialty Additives | Rheotech™ 146 is a non associative thickener designed for use in adhesives, paints, sealants & mastics. | Request Sample |
| SR545 | Sartomer Americas | SR545 is a monofunctional monomer that is suited to peroxide-cured coatings, adhesives, sealants, and emulsion or solution acrylics. | |
| SR730 | Sartomer Americas | SR730 is a monofunctional monomer developed for peroxide-cured coatings, adhesives, sealants, and emulsion or solution acrylics. | |
| D-32 | BlueSky Chemical Co., Ltd. | D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...view more D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. view less | |
| Fumed Silica A-200 | Ningxia Futael Silicon Industry Co.,LTD | Fumed Silica A-200 is a hydrophilic fumed silica with specific surface area around 200m2/g. It is ideal for use in high temperature silicon rubber, adhesive and sealants, and paints, coatings and printing inks. | |
| Priplast™ 3286 | Croda Coatings & Polymers | Priplast™ 3286 is a 100% bio-based polyester polyol, building block for cross-linked PU adhesives, cast PU elastomers, as well as foams and sealants. It brings excellent water resistance, improved flexibility, hydrolytic stability, as well as good flow an...view more Priplast™ 3286 is a 100% bio-based polyester polyol, building block for cross-linked PU adhesives, cast PU elastomers, as well as foams and sealants. It brings excellent water resistance, improved flexibility, hydrolytic stability, as well as good flow and wetting properties. This product is used for adhesives & sealants, foams, and industrial coating applications. view less | |
| VORANOL 4000LM | Univar Solutions | VORANOL 4000LM is a homopolymer diol with an molecular weight of 4000 mainly used for the manufacture of prepolymers for coatings, adhesives and sealants. The product enables the creation of cast elastomers, adhesives and sealants with excellent mechanica...view more VORANOL 4000LM is a homopolymer diol with an molecular weight of 4000 mainly used for the manufacture of prepolymers for coatings, adhesives and sealants. The product enables the creation of cast elastomers, adhesives and sealants with excellent mechanical properties. Due to its true functionality and low viscosity, it has the potential to reduce the use of more expensive polyols in the overall polyurethane formulation. view less | Request Sample |
| Domide G-0331 | Kukdo Chemical Co., Ltd. | Domide G-0331 is a reactive medium viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for making grouts, moldings, adhesives and sealants. | |
| Polurene MD 1500 | S.A.P.I.C.I. SpA | Polurene MD 1500 is a polyfunctional polyisocyanate of 4,4-diphenylmethane diisocyanate. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like sealants, synthetic mortars, and self-leveling compounds...view more Polurene MD 1500 is a polyfunctional polyisocyanate of 4,4-diphenylmethane diisocyanate. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like sealants, synthetic mortars, and self-leveling compounds. view less | |
| Polurene MD 1600 | S.A.P.I.C.I. SpA | Polurene MD 1600 is a polyfunctional polyisocyanate based on MDI. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like adhesives, 2K primers, sealants, and self-leveling compounds. | |
| Hanwha EM-3090 | Hanwha Chemical Corporation | Hanwha EM-3090 is a high density PSR resin paste made of a Polyvinyl Chloride emulsion with outstanding thermal and viscosity stability. It is well suited for the use in producing wallpapers, sealants, tarpaulins and eathers. | |
| Toluene | Univar Solutions | Toluene is an aromatic hydrocarbon commonly used as a solvent. It is recommended for paints, paint thinners, sealants, printing inks, adhesives, and disinfectants. | Request Sample |
| Silane Coupling Agent KH-560 | Zhejiang Feidian Chemical Co., Ltd. | KH-560 is a epoxy-functional silane. It is a clear, light straw liquid. It may be used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-b...view more KH-560 is a epoxy-functional silane. It is a clear, light straw liquid. It may be used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. KH-560 is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. view less | |
| REAXIS® C318 | Reaxis Inc. | REAXIS® C318 is a yellowish liquid catalyst used in the condensation cure of silicones and the synthesis and curing of polyurethanes. It is considered a slower catalyst compared to its butyl and methyl-based analogues. REAXIS® C318 is well suited for use as a catalyst in the production of RTV silicone adhesives and sealants, polyurethane elastomers, polyurethane adhesive and sealant...view more REAXIS® C318 is a yellowish liquid catalyst used in the condensation cure of silicones and the synthesis and curing of polyurethanes. It is considered a slower catalyst compared to its butyl and methyl-based analogues. REAXIS® C318 is well suited for use as a catalyst in the production of RTV silicone adhesives and sealants, polyurethane elastomers, polyurethane adhesive and sealants as well as polyurethane coatings. view less | |
| RHOPLEX 2620 | Univar Solutions | RHOPLEX 2620 is a 100% acrylic latex binder designed for high-performance translucent and lightly filled sealants. This high solids, low Tg emulsion can be formulated without plasticizer to meet the performance requirements of ASTM C920 Class 12.5 and Cla...view more RHOPLEX 2620 is a 100% acrylic latex binder designed for high-performance translucent and lightly filled sealants. This high solids, low Tg emulsion can be formulated without plasticizer to meet the performance requirements of ASTM C920 Class 12.5 and Class 25. Sealants formulated with this product exhibit excellent durability and water resistance as well as exceptional adhesion. view less | Request Sample |
| Silane ATPN-187 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass ...view more Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. It is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. view less | |
| RHEOBYK-430 | BYK | RHEOBYK-430 is a liquid rheology additive for solvent-borne coatings, adhesives, and sealants to improve anti-sagging and anti-settling properties. | Request Sample |
| BYK-3410 | BYK | BYK-3410 is a silicone-free surface additive for aqueous coatings, printing inks as well as adhesives and sealants to improve substrate wetting. | Request Sample |
| ACRONAL® 4311 X | BASF Dispersions & Resins | ACRONAL 4311 X is an acrylic dispersion for translucent sealants meeting ASTM C 290 performance. It imparts superior water resistance. | |
| VISIOMER® IDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® IDMA is a hydrophobic methacrylate monomer with very low Tg. It is for use as a co-monomer in adhesives, sealants and paint resins. | |
| VISIOMER® 1,6-HDDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® 1,6-HDDMA is a hydrophobic dimethacrylate. Ideal for use as crosslinker for sealants, adhesives, inks, photopolymer plates and dental compounds. | |
| M-CURE® 100 | Sartomer Americas | M-CURE® 100 is an aromatic acrylate monomer designed to reduce the viscosity of amine cured epoxy coatings without significantly affecting coating hardness and chemical resistance, or significantly reducing reactivity. M-CURE® 100 also has excellent wetting properties. Suggested applications include: adhesives, concrete coatings and sealants, concrete grouts and mortars and polymer, and sealant...view more M-CURE® 100 is an aromatic acrylate monomer designed to reduce the viscosity of amine cured epoxy coatings without significantly affecting coating hardness and chemical resistance, or significantly reducing reactivity. M-CURE® 100 also has excellent wetting properties. Suggested applications include: adhesives, concrete coatings and sealants, concrete grouts and mortars and polymer, and sealants. view less | |
| Priplast™ 3187 | Croda Coatings & Polymers | Priplast™ 3187 is a dimer fatty acid based, polyester polyol building block for PU adhesives, sealants, and elastomers. It provides high flexibility at very low temperatures as well as good compatibility to low polar components It also brings excellent w...view more Priplast™ 3187 is a dimer fatty acid based, polyester polyol building block for PU adhesives, sealants, and elastomers. It provides high flexibility at very low temperatures as well as good compatibility to low polar components It also brings excellent water resistance, hydrolytic stability, and good flow and wetting properties. This product is used for adhesives & sealants and elastomers applications. view less | |
| SiSiB® PC1710 | SiSiB SILICONES | SiSiB® PC1710 is a yellowish clear liquid. It is a novel alfa silane. It can be used in the production of silyl modified polymers which serve as binders in adhesives and sealants; as a crosslinker, water scavenger, and adhesive promoter in silane-crossl...view more SiSiB® PC1710 is a yellowish clear liquid. It is a novel alfa silane. It can be used in the production of silyl modified polymers which serve as binders in adhesives and sealants; as a crosslinker, water scavenger, and adhesive promoter in silane-crosslinking formulations, such as adhesive sealants, and coatings; or as a surface modifier for fillers (like glass, metal oxides, aluminum hydroxide, kaolin, wollastonite, mica) and pigments. view less | |
| SiSiB® PC1711 | SiSiB SILICONES | SiSiB® PC1711 is a colorless to yellowish clear liquid. It is a novel alfa silane. It can be used in the production of silyl modified polymers which serve as binders in adhesives and sealants; as a crosslinker, water scavenger, and adhesion promoter in ...view more SiSiB® PC1711 is a colorless to yellowish clear liquid. It is a novel alfa silane. It can be used in the production of silyl modified polymers which serve as binders in adhesives and sealants; as a crosslinker, water scavenger, and adhesion promoter in silane-crosslinking formulations, such as adhesives, sealants, and coatings; or as a surface modifier for fillers (like glass metal oxides, aluminum hydroxide, kaolin, wollastonite, mica) and pigments. view less | |
| Domide G-A0432 | Kukdo Chemical Co., Ltd. | Domide G-A0432 is a low viscosity Polyamidoamine Resin for reaction with liquid or solid Epoxy Resins. GA0432 is lower in viscosity than G-A0533. This product is well suited for use in sealants, electrical potting and casting. | |
| Domide G-0240 | Kukdo Chemical Co., Ltd. | Domide G-0240 is a reactive low viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for use in the making of grouts, moldings and other types of adhesives and sealant...view more Domide G-0240 is a reactive low viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for use in the making of grouts, moldings and other types of adhesives and sealants. view less | |
| C9 Resin | Yangzhou Sunchem Co., Ltd. | C9 Resin is a light yellow granular synthetic resin that has a pH value of 6-8 and an acid value of 0.5 mgKOH/g maximum. This product is used as a raw material for adhesives, sealants, coatings, and printing inks. | |
| StanChem SC 6713 | StanChem Polymers | StanChem SC 6713 is an all acrylic copolymer latex that brings a high degree of flexibility and creep resistance to industrial coatings, sealants and adhesives. | Request Sample |
