| Chlorez® 700 | Dover Chemical Corporation | Chlorez® 700 is a white powder solid that is 70% chlorinated paraffin and is well suited for use with alkyd resins. It is primarily used as a flame retardant for production of various products such as paints, coatings, rubber, adhesives, polyolefins, text...voir plus Chlorez® 700 is a white powder solid that is 70% chlorinated paraffin and is well suited for use with alkyd resins. It is primarily used as a flame retardant for production of various products such as paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. Additionally, it can improve ancillary in various grades of rubber and shows excellent synergies with antimony trioxide. voir moins | |
| Chlorez® 700-S | Dover Chemical Corporation | Chlorez® 700-S is a solid white powder of 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins, t...voir plus Chlorez® 700-S is a solid white powder of 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. And it shows excellent synergies with antimony trioxide and improvements with ancillary in various grades of rubber. voir moins | |
| Chloroflo 42 | Dover Chemical Corporation | Chloroflo 42 is a clear liquid made of a chlorinated long chain paraffin that contains a stabilizer to maintain product integrity during transport and storage. It is a nonflammable, non-corrosive, low volatile liquid at room temperature. Primarily used i...voir plus Chloroflo 42 is a clear liquid made of a chlorinated long chain paraffin that contains a stabilizer to maintain product integrity during transport and storage. It is a nonflammable, non-corrosive, low volatile liquid at room temperature. Primarily used in metal working applications as a straight or soluble oil for machining, drawing and stamping processes. Chloroflo 42 can be used in a variety of other applications including use as a flame retardant and plasticizer for paints and plastic production. voir moins | |
| Chlorowax® 40 | Dover Chemical Corporation | Chlorowax® 40 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax® 40 can be used in plasticizers an...voir plus Chlorowax® 40 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax® 40 can be used in plasticizers and EP metalworking packages. Chlorowax 40 is typically (but not limited to) applied in straight oil machining, drawing and stamping fluids. voir moins | |
| Chlorowax® 50 | Dover Chemical Corporation | Chlorowax® 50 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax 50 is typically (but not limited t...voir plus Chlorowax® 50 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax 50 is typically (but not limited to) applied in straight oil machining, drawing and stamping fluids. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| DA-8506 | Dover Chemical Corporation | DA-8506 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additi...voir plus DA-8506 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additional wetting and lubricity properties are desired in metal working applications. They can also be used as substitutes for chlorinated paraffins in lower temperature plasticizing applications. voir moins | |
| DA-8506XS | Dover Chemical Corporation | DA-8506XS is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when addi...voir plus DA-8506XS is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additional wetting and lubricity properties are desired in metal working applications. They can also be used as substitutes for chlorinated paraffins in lower temperature plasticizing applications. voir moins | |
| DA-8527 | Dover Chemical Corporation | DA-8527 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additi...voir plus DA-8527 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additional wetting and lubricity properties are desired in metal working applications. They can also be used as substitutes for chlorinated paraffins in lower temperature plasticizing applications. voir moins | |
| DO-8110 | Dover Chemical Corporation | DO-8110 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applicatio...voir plus DO-8110 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. DO-8110 can also be used as a plasticizer or as an additive in EP metalworking packages. voir moins | |
| Dovermulse H-0700 | Dover Chemical Corporation | Dovermulse H-0700 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~750 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-0700...voir plus Dovermulse H-0700 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~750 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-0700 is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1000 | Dover Chemical Corporation | Dovermulse H-1000 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1000...voir plus Dovermulse H-1000 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1000 is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1010-P | Dover Chemical Corporation | Dovermulse H-1010-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1010-P is primaril...voir plus Dovermulse H-1010-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1010-P is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1020-P | Dover Chemical Corporation | Dovermulse H-1020-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1020-P is primaril...voir plus Dovermulse H-1020-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1020-P is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1035-N | Dover Chemical Corporation | Dovermulse H-1035-N is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1035-N is primaril...voir plus Dovermulse H-1035-N is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1035-N is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovernox® 10 | Dover Chemical Corporation | Dovernox® 10 is a white free flowing powder, made of Tetrakis methylene (3,5-di-t-butyl-4-hydroxyhydrocinnamate) methane. It is a solid high molecular weight hindered phenolic antioxidant that can be used in a wide range of polymers. Dovernox 10 is well s...voir plus Dovernox® 10 is a white free flowing powder, made of Tetrakis methylene (3,5-di-t-butyl-4-hydroxyhydrocinnamate) methane. It is a solid high molecular weight hindered phenolic antioxidant that can be used in a wide range of polymers. Dovernox 10 is well suited for use as an effective stabilizer for polyolefins, styrenics, block copolymers, elastomers, adhesives, PVC, and polyurethanes. voir moins | |
| Dovernox® 76 | Dover Chemical Corporation | Dovernox® 76 is a white crystline powder of Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnamate. It is a solid high molecular weight hindered phenolic antioxidant that is effective in a wide range of polymers. Dovernox 76 can be used as an effective stabili...voir plus Dovernox® 76 is a white crystline powder of Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnamate. It is a solid high molecular weight hindered phenolic antioxidant that is effective in a wide range of polymers. Dovernox 76 can be used as an effective stabilizer for polyolefins, styrenics, block copolymers, elastomers, adhesives, PVC and polyurethanes. voir moins | |
| Dovernox® D-311 | Dover Chemical Corporation | Dovernox® D-311 is an antioxidant blend in powder form, and is offered by Dover Chemical Corporation, to be used in various polymer formulations. It is a two-component blend of Doverphos® S-480 and Dovernox® 10. | |
| Dovernox® D-321 | Dover Chemical Corporation | Dovernox® D-321 is an antioxidant blend in powder form, and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-480 and Dovernox® 10. | |
| Dovernox® D-911 | Dover Chemical Corporation | Dovernox® D-911 is a blend of Doverphos® S-9228 and Dovernox® 10 in a 1/1 weight/weight ratio. Chemically, Doverphos® S-9228 is Bis(2,4-dicumylphenyl) pentaerythritol diphosphite and Dovernox® 10 is Tetrakis methylene (3,5-di-t-butyl-4-hydroxyhydro-cinnam...voir plus Dovernox® D-911 is a blend of Doverphos® S-9228 and Dovernox® 10 in a 1/1 weight/weight ratio. Chemically, Doverphos® S-9228 is Bis(2,4-dicumylphenyl) pentaerythritol diphosphite and Dovernox® 10 is Tetrakis methylene (3,5-di-t-butyl-4-hydroxyhydro-cinnamate) methane. voir moins | |
| Dovernox® D-921 | Dover Chemical Corporation | Dovernox® D-921 is an antioxidant blend which has an advantage of low-dusting during handling and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-9228 and Dovernox® 10. | |
| Dovernox® D-9411-T | Dover Chemical Corporation | Dovernox® D-9411T is a one to one blend of Doverphos® S-9228T and Doverphos® S-480. It is offered by Dover Chemical Corporation to be used in various polymer formulations as an excellent cost/performance processing stabilizer. | |
| Dovernox®D-721 | Dover Chemical Corporation | Dovernox® D-721 is a white to off white powdered antioxidant blend and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-9228 and Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnama...voir plus Dovernox® D-721 is a white to off white powdered antioxidant blend and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-9228 and Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnamate. voir moins | |
| Doverphos® 10 HR (TPP) | Dover Chemical Corporation | Doverphos® 10 HR (TPP) is a clear liquid made of triphenyl phosphite (TPP). Primarily used as an aryl phosphite stabilizer, Doverphos® 10 HR (TPP) is well suited for the production of adhesives, polyurethanes, coatings, styrenics, polyesters, epoxies, PVC...voir plus Doverphos® 10 HR (TPP) is a clear liquid made of triphenyl phosphite (TPP). Primarily used as an aryl phosphite stabilizer, Doverphos® 10 HR (TPP) is well suited for the production of adhesives, polyurethanes, coatings, styrenics, polyesters, epoxies, PVC, and polycarbonates. voir moins | |
| Doverphos® 10 (TPP) | Dover Chemical Corporation | Doverphos® 10 (TPP) is a clear liquid made of triphenyl phosphite (TPP). Primarily used as an aryl phosphite stabilizer, it can be used in polyolefins to enhance the effect of polymerization catalyst. Doverphos® 10 (TPP) is well suited for the production...voir plus Doverphos® 10 (TPP) is a clear liquid made of triphenyl phosphite (TPP). Primarily used as an aryl phosphite stabilizer, it can be used in polyolefins to enhance the effect of polymerization catalyst. Doverphos® 10 (TPP) is well suited for the production of adhesives, polyurethanes, coatings, styrenics, polyesters, epoxies, PVC and polycarbonates. voir moins | |
| Doverphos® 11 | Dover Chemical Corporation | Doverphos® 11 is a clear liquid made of tetraphenyl dipropyleneglycol diphosphite, which has a high phosphorus content and a high molecular weight but low viscosity. Primarily used as a heat stabilizer, Doverphos® 11 is well suited for the production of r...voir plus Doverphos® 11 is a clear liquid made of tetraphenyl dipropyleneglycol diphosphite, which has a high phosphorus content and a high molecular weight but low viscosity. Primarily used as a heat stabilizer, Doverphos® 11 is well suited for the production of rigid and plasticized PVC applications where high gloss is important. voir moins | |
| Doverphos® 12 | Dover Chemical Corporation | Doverphos® 12 is a clear liquid made from poly (dipropyleneglycol) phenyl phosphite, which has a high phosphorus content and high molecular weight. Primarily used as a heat stabilizer, Doverphos® 12 is well suited for use in the production of rigid and p...voir plus Doverphos® 12 is a clear liquid made from poly (dipropyleneglycol) phenyl phosphite, which has a high phosphorus content and high molecular weight. Primarily used as a heat stabilizer, Doverphos® 12 is well suited for use in the production of rigid and plasticized PVC applications where early color hold and brighter, more consistent color is important. voir moins | |
| Doverphos® 213 (DPP) | Dover Chemical Corporation | Doverphos® 213 (DPP) is a clear liquid made of diphenyl phosphite which is a liquid diaryl phosphite with a relatively low molecular weight and a high phosphorus content. Primarily used as a secondary stabilizer in PVC, Doverphos® 213 (DPP) can also be e...voir plus Doverphos® 213 (DPP) is a clear liquid made of diphenyl phosphite which is a liquid diaryl phosphite with a relatively low molecular weight and a high phosphorus content. Primarily used as a secondary stabilizer in PVC, Doverphos® 213 (DPP) can also be effective in improving the color of unsaturated polyesters and minimize plateout during processing. voir moins | |
| Doverphos® 253 | Dover Chemical Corporation | Doverphos® 253 is a clear liquid made of dioleyl hydrogen phosphite with a relatively high molecular weight and low phosphorus content. Primarily used as a flame retardant additive, it can be used as a costabilizer with mixed metal stabilizers used in PVC...voir plus Doverphos® 253 is a clear liquid made of dioleyl hydrogen phosphite with a relatively high molecular weight and low phosphorus content. Primarily used as a flame retardant additive, it can be used as a costabilizer with mixed metal stabilizers used in PVC applications. In addition Doverphos® 253 can be used in lube applications as an additive for metalworking fluids. voir moins | |
| Doverphos® 4 (TNPP) | Dover Chemical Corporation | Doverphos® 4 (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP). It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer for a wide variety of applications, Doverphos® 4 (TNPP) is w...voir plus Doverphos® 4 (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP). It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer for a wide variety of applications, Doverphos® 4 (TNPP) is well suited for use in the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® 4-HR Plus (TNPP) | Dover Chemical Corporation | Doverphos® 4-HR Plus (TNPP) is a clear liquid mad of trisnonylphenyl phosphite (TNPP) with approximately 1.00% triisopropanolamine. It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer Doverpho...voir plus Doverphos® 4-HR Plus (TNPP) is a clear liquid mad of trisnonylphenyl phosphite (TNPP) with approximately 1.00% triisopropanolamine. It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer Doverphos® 4-HR Plus (TNPP) is well suited for the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® 4-HR (TNPP) | Dover Chemical Corporation | Doverphos® 4-HR (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) with pproximately 0.75% triisopropanolamine. Primarily used as a heat stabilizer, Doverphos® 4-HR (TNPP) is well suited for the production of polyolefin, acrylics, adhesives...voir plus Doverphos® 4-HR (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) with pproximately 0.75% triisopropanolamine. Primarily used as a heat stabilizer, Doverphos® 4-HR (TNPP) is well suited for the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® 49 (TTDP) | Dover Chemical Corporation | Doverphos® 49 (TTDP) is a clear liquid made of Tris (Tridecyl) Phosphite which is a high molecular weight and low phosphorus content alkyl phosphate. Primarily used as a heat stabilizer, Doverphos® 49 (TTDP) has good hydrolytic stability and low volatilit...voir plus Doverphos® 49 (TTDP) is a clear liquid made of Tris (Tridecyl) Phosphite which is a high molecular weight and low phosphorus content alkyl phosphate. Primarily used as a heat stabilizer, Doverphos® 49 (TTDP) has good hydrolytic stability and low volatility when mixed with additional metal heat stabilizers for production of PVC products. voir moins | |
| Doverphos® 6 (TDP) | Dover Chemical Corporation | Doverphos® 6 (TDP) is a clear liquid made of triisodecyl phosphite which is an alkyl phosphite with a low molecular weight and high phosphorus content. Primarily used as a heat stabilizer, it can be used in rigid and plasticized PVC applications to give b...voir plus Doverphos® 6 (TDP) is a clear liquid made of triisodecyl phosphite which is an alkyl phosphite with a low molecular weight and high phosphorus content. Primarily used as a heat stabilizer, it can be used in rigid and plasticized PVC applications to give brighter, more consistent colors and improve early color and clarity in un-pigmented compounds. Doverphos® 6 (TDP) is well suited for use in the production of polyolefins, polyurethanes, coatings, ABS, lubricants, and polyethylene terephthalate. voir moins | |
| Doverphos® 613 | Dover Chemical Corporation | Doverphos® 613 is a clear liquid made of alkyl (C12-C15) Bisphenol A Phosphite. It is primarily used to improve the color, light stability, and clarity of PVC and vinyl copolymers and can be used as a secondary stabilizer when in conjunction with primary ...voir plus Doverphos® 613 is a clear liquid made of alkyl (C12-C15) Bisphenol A Phosphite. It is primarily used to improve the color, light stability, and clarity of PVC and vinyl copolymers and can be used as a secondary stabilizer when in conjunction with primary metal stabilizers and epoxy stabilizers that commonly used in these applications. Doverphos 613 is well suited for use in the production of isocyanates either MDI, TDI, aliphatic isocyanates, rigid PVC and rigid vinyl chloride copolymers. voir moins | |
| Doverphos® 7 (PDDP) | Dover Chemical Corporation | Doverphos® 7 (PDDP) is a clear liquid made of phenyl diisodecyl phosphite and is a high molecular weight with a low phosphorus content alkyl-aryl phosphite. Primarily used as a heat stabilizer, Doverphos® 7 (PDDP) is well suited for the production of poly...voir plus Doverphos® 7 (PDDP) is a clear liquid made of phenyl diisodecyl phosphite and is a high molecular weight with a low phosphorus content alkyl-aryl phosphite. Primarily used as a heat stabilizer, Doverphos® 7 (PDDP) is well suited for the production of polyurethanes, coatings, ABS, and polycarbonates. voir moins | |
| Doverphos® 8 (DPDP) | Dover Chemical Corporation | Doverphos® 8 (DPDP) is a clear liquid made of diphenyl isodecyl phosphite. Primarily used as a heat stabilizer, it can be used in rigid and plasticized PVC applications to give brighter, more consistent colors. Doverphos® 8 (DPDP) is well suited for the p...voir plus Doverphos® 8 (DPDP) is a clear liquid made of diphenyl isodecyl phosphite. Primarily used as a heat stabilizer, it can be used in rigid and plasticized PVC applications to give brighter, more consistent colors. Doverphos® 8 (DPDP) is well suited for the production of polyurethanes, coatings, ABS, and polycarbonates. voir moins | |
| Doverphos® 9 (DPIOP) | Dover Chemical Corporation | Doverphos® 9 (DPIOP) is a clear liquid made of diphenyl isooctyl phosphite, which has a low molecular weight, and high phosphorus content of alkyl-aryl phosphites. Primarily used as a heat stablizer, it can also be used as a brightness stabilizer for mo...voir plus Doverphos® 9 (DPIOP) is a clear liquid made of diphenyl isooctyl phosphite, which has a low molecular weight, and high phosphorus content of alkyl-aryl phosphites. Primarily used as a heat stablizer, it can also be used as a brightness stabilizer for more consistent colors in PVC applications. Doverphos® 9 (DPIOP) is well suited for the production of polyurethanes, coatings, ABS, and polycarbonates. voir moins | |
| Doverphos® HiPure 4 (TNPP) | Dover Chemical Corporation | Doverphos® HiPure 4 (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) that has less than 0.1% residual nonylphenol. It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer, Doverph...voir plus Doverphos® HiPure 4 (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) that has less than 0.1% residual nonylphenol. It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer, Doverphos® HiPure 4 (TNPP) is well suited for the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® HiPure 4-HR (TNPP) | Dover Chemical Corporation | Doverphos® HiPure 4-HR (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) with approximately 0.75% triisopropanolamine and less than 0.1% residual nonyl phenol. Primarily used as a heat stabilizer, Doverphos® HiPure 4-HR (TNPP) is well suit...voir plus Doverphos® HiPure 4-HR (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) with approximately 0.75% triisopropanolamine and less than 0.1% residual nonyl phenol. Primarily used as a heat stabilizer, Doverphos® HiPure 4-HR (TNPP) is well suited for the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® S-480 | Dover Chemical Corporation | Doverphos® S-480 is a white free flowing powder of tris (2,4-di-t-butylphenyl) phosphite. It is a solid phosphite with excellent hydrolytic stability that can be used as a processing stabilizer for polymers to help control color and melt flow. Doverphos S...voir plus Doverphos® S-480 is a white free flowing powder of tris (2,4-di-t-butylphenyl) phosphite. It is a solid phosphite with excellent hydrolytic stability that can be used as a processing stabilizer for polymers to help control color and melt flow. Doverphos S-480 can also be used to stabilize polyesters, polycarbonates, polyamides, polystyrenes and elastomers. voir moins | |
| Doverphos® S-680 | Dover Chemical Corporation | Doverphos® S-680 is a solid white flake of distearyl pentaerythritol diphosphite. Primarily used as an antioxidant and stabilizer for polymers and adhesives. Doverphos® S-680 is well suited for use in the production of polyolefins, polystyrene, rubber, AB...voir plus Doverphos® S-680 is a solid white flake of distearyl pentaerythritol diphosphite. Primarily used as an antioxidant and stabilizer for polymers and adhesives. Doverphos® S-680 is well suited for use in the production of polyolefins, polystyrene, rubber, ABS, PVC, polyester, and polycarbonates. voir moins | |
| Doverphos® S-682 | Dover Chemical Corporation | Doverphos® S-682 is a solid white flake of distearyl pentaerythritol diphosphite and contains less than 1% triisopropanolamine. Primarily used as an antioxidant and stabilizer for polymers and adhesives. Doverphos® S-682 is well suited for use in the prod...voir plus Doverphos® S-682 is a solid white flake of distearyl pentaerythritol diphosphite and contains less than 1% triisopropanolamine. Primarily used as an antioxidant and stabilizer for polymers and adhesives. Doverphos® S-682 is well suited for use in the production of polyolefins, polystyrene, rubber, ABS, PVC, polyester, and polycarbonates. voir moins | |
| Doverphos® S-9228 | Dover Chemical Corporation | Doverphos® S-9228 is an off white, free flowing powder made of Bis (2,4-dicumylphenyl) pentaerythritol diphosphite. Primarily used as a solid phosphite antioxidant additive, it has excellent hydrolytic stability without the addition of inert products or ...voir plus Doverphos® S-9228 is an off white, free flowing powder made of Bis (2,4-dicumylphenyl) pentaerythritol diphosphite. Primarily used as a solid phosphite antioxidant additive, it has excellent hydrolytic stability without the addition of inert products or triisopropanol amine. Doverphos® S-9228 exhibits similar color performance as demonstrated by distearyl pentaerythritol diphosphite. Doverphos® S-9228 can be used to improve the performance of polyolefin resins, engineering resins and powder coatings. voir moins | |
| Doverphos® S-9228PC | Dover Chemical Corporation | Doverphos® S-9228PC is an off-white free flowing powder phosphite antioxidant. Primarily used to improve the performance of polyolefin resins, engineering resins and powder coatings, it offers high activity with good color, thermal and hydrolitic stabilit...voir plus Doverphos® S-9228PC is an off-white free flowing powder phosphite antioxidant. Primarily used to improve the performance of polyolefin resins, engineering resins and powder coatings, it offers high activity with good color, thermal and hydrolitic stability. Because of its high melting point, Doverphos® S-9228PC can be utilized in applications that require processing at elevated temperatures. voir moins | |
| Doverphos® S-9228T | Dover Chemical Corporation | Doverphos® S-9228T is an off-white free flowing powder phosphite antioxidant with 1% triisopropanol amine. Primarily used to improve the performance of polyolefin resins, engineering resins and powder coatings, it offers high activity with good color, th...voir plus Doverphos® S-9228T is an off-white free flowing powder phosphite antioxidant with 1% triisopropanol amine. Primarily used to improve the performance of polyolefin resins, engineering resins and powder coatings, it offers high activity with good color, thermal and hydrolitic stability. Because of its high melting point, Doverphos S-9228T can be utilized in applications that require processing at elevated temperatures. voir moins | |
| Doversperse 3-NR | Dover Chemical Corporation | Doversperse 3-NR is a cream white liquid of chlorinated paraffin aqueous emulsion of medium chain length. Primarily used as a flame retardant additive, it can improve adhesion and impart water resistance to a number of products including adhesives, rubber...voir plus Doversperse 3-NR is a cream white liquid of chlorinated paraffin aqueous emulsion of medium chain length. Primarily used as a flame retardant additive, it can improve adhesion and impart water resistance to a number of products including adhesives, rubber coatings, inks, carpet backings, paper and fabric coatings. Because of Doversperse 3-NR's non-ionic base, it can be used in both anionic and cationic emulsion systems. voir moins | |
| Doversperse A-1 | Dover Chemical Corporation | Doversperse A-1 is and off-white to beige powder and is an aqueous dispersion of C18-28 chlorinated alkane resin. Primarily used as a flame retardant additive, it can also improve adhesion and impart water or chemical resistance to products such as adhesi...voir plus Doversperse A-1 is and off-white to beige powder and is an aqueous dispersion of C18-28 chlorinated alkane resin. Primarily used as a flame retardant additive, it can also improve adhesion and impart water or chemical resistance to products such as adhesives, rubber coatings inks, carpet backings, paper and fabric coatings. Because of Doversperse A-1's non-ionic base, it is particularly useful in both anionic and cationic emulsion systems. voir moins | |
| Doversperse H-1015-P | Dover Chemical Corporation | Doversperse H-1015-P is a dark brown or amber liquid made of a polyisobutylene succinimide prepared from 950 MW HR PIBSA and high molecular weight amines. It was prepared via the thermal route, so there is no chlorine. Doversperse H-1015-P is primarily us...voir plus Doversperse H-1015-P is a dark brown or amber liquid made of a polyisobutylene succinimide prepared from 950 MW HR PIBSA and high molecular weight amines. It was prepared via the thermal route, so there is no chlorine. Doversperse H-1015-P is primarily used as a dispersant in various applications. voir moins | |
| Doversperse H-1035-P | Dover Chemical Corporation | Doversperse H-1035-P is a dark brown or amber liquid made of a polyisobutylene succinimide prepared from 950 MW HR PIBSA and high molecular weight amines. It was prepared via the thermal route, so there is no chlorine. Doversperse H-1035-P is primarily us...voir plus Doversperse H-1035-P is a dark brown or amber liquid made of a polyisobutylene succinimide prepared from 950 MW HR PIBSA and high molecular weight amines. It was prepared via the thermal route, so there is no chlorine. Doversperse H-1035-P is primarily used as a dispersant in various applications. voir moins | |
| Dynasylan® 1124 | Evonik Operations GmbH, BL Silanes | Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be us...voir plus Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the chemical modification of polymers and isocyanates. voir moins | |
| DYNASYLAN® 1146 | Evonik Operations GmbH, BL Silanes | Hydrophobic Dynasylan® 1146 diaminofunctional silane is used in adhesives and sealants, and in coatings, to improve the adhesion of amino-reactive resins (e.g. RTV-silicones, two-part urethanes, silylated urethanes, MS polymers, and two-part epoxies) to i...voir plus Hydrophobic Dynasylan® 1146 diaminofunctional silane is used in adhesives and sealants, and in coatings, to improve the adhesion of amino-reactive resins (e.g. RTV-silicones, two-part urethanes, silylated urethanes, MS polymers, and two-part epoxies) to inorganic surfaces, plastic surfaces, and inorganic fillers. Dynasylan® 1146 silane is characterized by randomly distributed linear and cyclic oligosiloxanes and it fulfills the OECD polymer definition. Its low volatility and viscosity make compounding easy. Dynasylan® 1146 silane produces significantly less by-product (VOC) and has a correspondingly low odor level during application. voir moins | |
| Dynasylan® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt...voir plus Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt]4) by partial hydrolysis of the ethoxy groups to hydroxyl groups and subsequent condensation with formation of siloxane bonds (-Si-O-Si-). Dynasylan® 40 is a colorless, low-viscosity liquid with an SiO2 content of 40% (the Si content of Dynasylan® 40 is calculated as SiO2). The polysilicic acids still have a sufficient content of ethoxy groups which can be activated by acid- or base-catalyzed hydrolysis. Condensation starts even during hydrolysis, with the formation of relatively large polymeric molecules. During storage of these hydrolysates, condensation continues until a gel is formed, where the rate depends on the degree of hydrolysis. The action of the hydrolysates as binders is based on the continuation of the hydrolysis with subsequent gelation and dehydration to give polymeric SiO2 structures. voir moins | |
| Dynasylan® 4148 | Evonik Operations GmbH, BL Silanes | Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contr...voir plus Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contrary to most other organofunctional silanes, Dynasylan® 4148 features chemical polarity but has a non-reactive polar group. Furthermore, Dynasylan® 4148 can be used as anti-settling agent for fillers and pigments in paints as well as corrosion inhibitors in glycol based cooling agents. voir moins | |
| Dynasylan® 6490 | Evonik Operations GmbH, BL Silanes | Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. ...voir plus Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE). The high boiling point of Dynasylan® 6490, together with its high flash point, gives it outstanding advantages with respect to safety and handling during processing. From an environmental viewpoint it should be noted that the amount of released hydrolysis methanol (VOC) is significantly reduced compared to monomeric vinyl silanes. voir moins | |
| Dynasylan® A | Evonik Operations GmbH, BL Silanes | Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-...voir plus Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-catalysed hydrolysis. Since all 4 ethoxy groups are able to participate in this reaction, Dynasylan® A is regarded as tetrafunctional. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (-Si-O-Si-). Condensation starts before hydrolysis is complete. During storage of these hydrolysates condensation, continues until a gel is formed. The rate of gelation depends on the concentration of water. voir moins | |
| DYNASYLAN® AMEO-T | Evonik Operations GmbH, BL Silanes | DYNASYLAN® AMEO-T is a blend of primary and secondary aminofunctional silanes. The dual nature of the product allows it to bind chemically to both inorganic materials and organic polymers, thus acting as an adhesion promoter, a surface modifier or as a re...voir plus DYNASYLAN® AMEO-T is a blend of primary and secondary aminofunctional silanes. The dual nature of the product allows it to bind chemically to both inorganic materials and organic polymers, thus acting as an adhesion promoter, a surface modifier or as a reactive reagent. voir moins | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...voir plus Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. voir moins | |
| Dynasylan® P | Evonik Operations GmbH, BL Silanes | Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient ...voir plus Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations. voir moins | |
| Dynasylan® SIVO 202 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 202 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 202 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silyla...voir plus Dynasylan® SIVO 202 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 202 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers), RTV-silicones, two-part polyurethanes and two-part epoxies to inorganic surfaces and some difficult plastic surfaces. In addition, Dynasylan® SIVO 202 can lead to fast sealant curing and high-crosslinked products and it imparts both additional flexibility and hydrophobicity. voir moins | |
| Dynasylan® SIVO 203 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 203 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 203 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silyla...voir plus Dynasylan® SIVO 203 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 203 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers), RTV-silicones, two-part polyurethanes and two-part epoxies to inorganic surfaces and some difficult plastic surfaces. In addition, Dynasylan® SIVO 203 can lead to fast sealant curing and high-crosslinked products and it imparts both additional flexibility and hydrophobicity. voir moins | |
| DYNASYLAN® SIVO 210 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or ...voir plus Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or as chemical modification of substances. Dynasylan® SIVO 210 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols, aliphatic or aromatic hydrocarbons. voir moins | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMOEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMOEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. The dual nature of its reactivity allows Dynasylan® VTMOEO to bind chemically to both inorganic materials (e.g. glass, meta...voir plus Dynasylan® VTMOEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. The dual nature of its reactivity allows Dynasylan® VTMOEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning mainly as an efficient adhesion promoter and/or surface modifier. Dynasylan® VTMOEO is a colorless, low-viscosity liquid with a typical aromatic odor. voir moins | |
| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...voir plus Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. voir moins | |
| FLYTAC 103-85 | Guangzhou Flying Dragon Chemical Ltd. | A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS,...voir plus A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. voir moins | |
| Flytac 103-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for thi...voir plus Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for this product include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It an also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. Flytac 103-E has a softening point (R&B) of 82-90°C min., an acid value of 3-8mg KOH/g max., and a colour gardener (in 50% Toluene) of 8 max. voir moins | |
| Flytac 104 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used...voir plus Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used as raw material for the manufacture of a number of products including bookbinding, caulking, paint and coatings, personal care and cosmetics, pressure sensitive adhesives, rubber and plastic modification, solvent-borne adhesives, tapes and labels, waterborne adhesives, and wax modification. This product has an abietic acid of 2.0% max., a softening point (R&B) of 76°C min., and a dehydroabietic acid of 8.0% max. voir moins | |
| Flytac 105-L | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In...voir plus Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. Flytac105-L has a softening point (R&B) of 85°C, an acid value of 9mg KOH/g max., and an ash content of 0.2% max. voir moins | |
| Flytac 106-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesiv...voir plus Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. Flytac 106-100 has a color gardener of 8~10, a specific gravity (25°C/25°C) of 1.060~1.090, and a softening point (R&B) of 95-102°C min. voir moins | |
| Flytac 106-100L | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesi...voir plus Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. This product has a color gardener of 4~6, a softening point (R&B) of 95-102°C, and a specific gravity (25°C/25°C) of 1.060~1.090. voir moins | |
| Flytac 107 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important com...voir plus Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important component for making potassium soaps. This product has a dehydrated acid content of 52.0% min., an unsaponifiable material of 10.0% max., and an abietic acid of 1% max. voir moins | |
| Flytac 111-101 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...voir plus Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-101 has a tetrahydro resin acid of 10.0% min., an abietic acid of 2.0% max., and a dehydroabietic acid of 10.0% max. voir moins | |
| Flytac 111-301 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...voir plus Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-301 has an abietic acid of 0-0.1% max., a softening point (R&B) of 78°C, and a tetrahydro resin acid level of 30.0-40.0%. voir moins | |
| Flytac 114-125 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. This product offers color stability, is resistant to yellowing, and has good heat resistance and adhesion. Flytac 114-125 has a color (Gardner Grade) of 5 max., an acid value of 30mg KOH/g max., and a softening point (R&B) of 125 ± 2°C min. voir moins | |
| Flytac 114-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-130 has a softening point (R&B) of 130 ± 2°C min., an acid value of 30mg KOH/g max., and a color (Gardener Grade) of 5 max. voir moins | |
| Flytac 114-135 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-135 has an acid value of 30mg KOH/g max., a color (Gardner Grade) of 5 max., and a softening point (R&B) of 135 ± 2°C min. voir moins | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...voir plus Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. voir moins | |
| Flytac 116-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg K...voir plus Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg KOH/g, a softening point (R&B) of 110± 5°C, and a color gardner (50% Benzene solution) of 5 max. voir moins | |
| Flytac 116-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180...voir plus Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180 ± 10mg KOH/g, a softening point (R&B) of 130 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 116-150 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg ...voir plus Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg KOH/g, a softening point (R&B) of 150 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 116-160 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg ...voir plus Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg KOH/g, a softening point (R&B) of 160 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 117-115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...voir plus Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-115 has a softening point (R&B) of 110-120°C min., a dissoluble matter in hot water amount of 0.20, and an acid number of 145mg KOH/g min. voir moins | |
| Flytac 117-140 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...voir plus Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-140 has a softening point (R&B) of 135-145°C min., an acid number of 145mg KOH/g min., and a dissoluble matter in alcohol of 0.03% max. voir moins | |
| Flytac 117-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-formi...voir plus Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-95 has an acid number of 150mg KOH/g, a dissoluble matter in alcohol of 0.03% max., and a softening point (R&B) of 90-100°C min. voir moins | |
| FLYTAC 120-100W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...voir plus A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. voir moins | |
| FLYTAC 120-90W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...voir plus A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. voir moins | |
| Flytac 188-C5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA...voir plus Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA properties such as trackness, adhesive strength and cohesive strength. It can also be used in the production of paints, adhesives and in rubber industries. Flytac 188-C5 has an average molecular weight of 1000-2600, a melt viscosity (CPS at 200°C) of 300 max., and a softening point (R&B) of 95-105°C. voir moins | |
| Flytac 188-C5/C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw m...voir plus Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw material for the product of paints, adhesives, and in rubber industries. Flytac 188-C5/C9 has an ash content of 0.1% max., an acid value of 0.3mg KOH/g max., and a softening point (B&R) of 90~120°C max. voir moins | |
| Flytac 188-C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300...voir plus Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300-3000. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-C9 has a softening point (B&R) of 90-140°C, an acid value of 0.5mg KOH/g max., and an ash amount of 0.1% max. voir moins | |
| Flytac 188-HC5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color re...voir plus Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color retention upon aging. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-HC5 has a softening point (B&R) of 95-105°Cg, an acid value of 0.5mg KOH/g max., and an ash amount of 0.02% max. voir moins | |
| Flytac102-100F | Guangzhou Flying Dragon Chemical Ltd. | Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...voir plus Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR.This product has a melt viscosity (CPS at 150°C) of 850-1300, a softening point (R&B) of 97-103°C, and a specific gravity (25°C/25°C) of 1.060~1.090. voir moins | |
| Flytac103-90 | Guangzhou Flying Dragon Chemical Ltd. | Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...voir plus Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. voir moins | |
| Flytac105-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-ox...voir plus Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. This product is ideally used for wax modification, waterborne adhesives, tapes and labels, solventborne adhesives, rubber and plastic modification, and paint and coatings. Flytac105-E has a softening point (R&B) of 78-88°C min., a specific gravity (25°C/25°C) of 1.060~1.090, and an ash content of 0.1% max. voir moins | |
| Hordaresin CH151P | Dover Chemical Corporation | Hordaresin CH151P is a solid white powder of 71% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins...voir plus Hordaresin CH151P is a solid white powder of 71% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. And it shows excellent synergies with antimony trioxide and improvements with ancillary in various grades of rubber. voir moins | |
| Hordaresin NP-70 | Dover Chemical Corporation | Hordaresin NP-70 is a solid white powder that is 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant, it has a variety of applications including paints, coatings, rubber, adhesives, polyolefins, tex...voir plus Hordaresin NP-70 is a solid white powder that is 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant, it has a variety of applications including paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. It shows excellent synergies with antimony trioxides and improvements with ancillary in various grades of rubber. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins |
