| Antioxidant SN-1 | Tiarco Chemical | Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds...展开 Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds, and the maximum benefits are best noticed when used in combination with a primary antioxidant in natural and synthetic polymers. It is used in light colored or black compounds such as carpet backing foams, scrim adhesives, SBR latex stabilization, rubber based adhesives, footwear compounds and mechanical goods, and more. 收起 | |
| Octocure 462 | Tiarco Chemical | Octocure 462 is an aqueous zinc oxide dispersion readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing SBR and natural latex rubber. | |
| Octocure 487 | Tiarco Chemical | Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product m...展开 Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product may also be used at lower concentrations as a slow precure accelerator in natural latex. 收起 | |
| Octocure 530 | Tiarco Chemical | Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accel...展开 Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accelerator in SBR, neoprene, and nitrile latices. This product is typically used as an activator for MBT and other thiazole accelerators, or in conjunction with dithiocarbamates or thiocarbanilides. 收起 | |
| Octocure 551 | Tiarco Chemical | Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usu...展开 Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usually used in conjunction with diphenyl guanidine. 收起 | |
| Octocure 573 | Tiarco Chemical | Octocure 573 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber. | |
| Octocure 803 | Tiarco Chemical | Octocure 803 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber. | |
| Octocure ZBZ-42 | Tiarco Chemical | Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary acc...展开 Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary accelerators such as ZMBT. Octocure ZBZ-42 is ideal for vulcanization processes where the formation of volatile nitrosoamines needs to be reduced. 收起 | |
| Octocure ZDB-100 | Tiarco Chemical | Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This prod...展开 Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This product can also be applied in low doses in non-curing natural and SBR adhesive compounds as a non-discoloring antioxidant. 收起 | |
| Octocure ZDB-50 | Tiarco Chemical | Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus...展开 Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus. 收起 | |
| Octocure ZDB-50 CF | Tiarco Chemical | Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and h...展开 Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and high modulus. This product can also be used at low doses in noncuring natural and SBR latex compounds as a non-discoloring antioxidant. 收起 | |
| Octocure ZDE-50 | Tiarco Chemical | Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts z...展开 Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts zinc mercaptobenzothiazole. 收起 | |
| Octocure ZDIB-50 | Tiarco Chemical | Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high mo...展开 Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high modulus. As a secondary accelerator, this product works well with thiurams, thiazoles, and guanidines. Octocure ZDIB-50 may be used at low levels to increase cure rates of slower curing systems. It also serves as an effective free-radical emulsion polymerization shortstop in styrene-butadiene rubber (SBR) and acrylonitrile butadiene rubber (NBR) elastomer production. 收起 | |
| Octocure ZDM-50 | Tiarco Chemical | Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suit...展开 Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suited for use as an additive in the production of latex and latex based products. 收起 | |
| Octocure ZMBT-50 | Tiarco Chemical | Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This...展开 Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. 收起 | |
| Octocure ZMBT-50 CF | Tiarco Chemical | Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithioca...展开 Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. 收起 | |
| Octoguard FR-11 DF | Tiarco Chemical | Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...展开 Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 收起 | |
| Octoguard FR-13 DF | Tiarco Chemical | Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...展开 Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 收起 | |
| Octolite 424-50 | Tiarco Chemical | Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant pro...展开 Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in synthetic and natural latex polymers. This product is recommended for use in carboxylated SBR latex compounds and adhesives. 收起 | |
| Octolite 497 | Tiarco Chemical | Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat...展开 Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat, ultraviolet light, and oxidation. This dispersion is milled to a fine particle size for maximum activity. Octolite 497 is well suited for use in the production of food packaging adhesives and with repeated use rubber products. 收起 | |
| Octolite 544 CF | Tiarco Chemical | Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, a...展开 Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, and other latex systems. It is also particularly beneficial in protecting against degradation by trace metals such as copper and manganese. 收起 | |
| Octolite 640 | Tiarco Chemical | Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protectio...展开 Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protection in SBR, natural, and neoprene latex polymers. Octolite 640 is particularly useful for providing superior protection against high-temperature degradation in certain latex polymer compounds. 收起 | |
| Octolite 647 | Tiarco Chemical | Octolite 647 is a yellow to tan aqueous dispersion of polymeric quinoline derivative. This general-purpose semi-staining antioxidant is frequently used in latex compounding to impart high temperature resistance. It also improves ozone resistance of many p...展开 Octolite 647 is a yellow to tan aqueous dispersion of polymeric quinoline derivative. This general-purpose semi-staining antioxidant is frequently used in latex compounding to impart high temperature resistance. It also improves ozone resistance of many polymers. It is non-blooming and of high durability. This product is typically used as a rubber antioxidant stabilizer for natural, butadiene, chloroprene, and nitile latex. Octolite 647 is also used as a corrosion inhibitor and preservative (it retards oxidation, deterioration, and rancidity). 收起 | |
| Octolite 668 | Tiarco Chemical | Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH ran...展开 Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH range for direct addition to latex. It exhibits low volatility and excellent frothability. Octolite 668 is also highly effective in polychloroprene polymers, providing protection against degradation due to heat, light, and oxygen. 收起 | |
| Octolite 806 | Tiarco Chemical | Octolite 806 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (dilaurylthiodipropionate). It provides highly efficient stabilization and antioxidant protection. Octolite 806 is recommended for u...展开 Octolite 806 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (dilaurylthiodipropionate). It provides highly efficient stabilization and antioxidant protection. Octolite 806 is recommended for use in butadiene/styrene and synthetic latex compounds as well as SBR and natural rubber compounds. 收起 | |
| Octolite 809 | Tiarco Chemical | Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-...展开 Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-milled to a fine particle size for maximum activity. Octolite 809 is essentially non-staining but can cause some slight pink discoloration in certain applications. 收起 | |
| Octolite AO-50 | Tiarco Chemical | Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protectio...展开 Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protection to synthetic and natural latex polymers. Octolite AO-50 is ideally suited for use in carboxylated SBR latex compounds and adhesives. 收起 | |
| Octolite WL | Tiarco Chemical | Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against ...展开 Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against the effects of heat, ultraviolet light, and oxidation. Octolite WL is well suited for use in the production of food packaging adhesives and with repeated use rubber products. 收起 | |
| Octopol NB-47 | Tiarco Chemical | Octopol NB-47 is an ultra-fast accelerator composed of sodium dibutyldithiocarbamate. It is ideal for use in natural latex, SBR, and CR latex compounds, where it activates thiazoles in the latex cure system. This product is of particular interest in latex...展开 Octopol NB-47 is an ultra-fast accelerator composed of sodium dibutyldithiocarbamate. It is ideal for use in natural latex, SBR, and CR latex compounds, where it activates thiazoles in the latex cure system. This product is of particular interest in latex compounds where the zinc level from zinc dithiocarbamates can be reduced. 收起 | |
| Octosol 449 | Tiarco Chemical | Octosol 449 is a potassium oleate soap in the form of a yellow to amber liquid. It is prepared from fine oleic acid (red oil) reacted with a minimum excess of potassium hydroxide (KOH, potash). This fatty acid soap plays an important role in latex compoun...展开 Octosol 449 is a potassium oleate soap in the form of a yellow to amber liquid. It is prepared from fine oleic acid (red oil) reacted with a minimum excess of potassium hydroxide (KOH, potash). This fatty acid soap plays an important role in latex compounds by contributing to mechanical and chemical stability. Octosol 449 may be used as a primary frothing aid in gelled latex foam compounds. It may also used as a dispersant for fillers, dry chemicals, and pigments. 收起 | |
| Octosol 571 | Tiarco Chemical | Octosol 571 is a cationic surfactant consisting of lauryl trimethyl ammonium chloride in a solution of water and isopropyl alcohol. It is recommended as an emulsifier in cationic or blended ionic emulsion systems. Its use in latex compounds as a "sensitiz...展开 Octosol 571 is a cationic surfactant consisting of lauryl trimethyl ammonium chloride in a solution of water and isopropyl alcohol. It is recommended as an emulsifier in cationic or blended ionic emulsion systems. Its use in latex compounds as a "sensitizer" is due to the fact that quaternary ammonium surfactants are not compatible with the anionic latex stabilizers. Some latex foams must be gelled before curing in order to mold or emboss while wet, or to prevent loss of gauge due to cell collapse during the cure interval. 收起 | |
| Octosol 687 | Tiarco Chemical | Octosol 687 is a fatty acid soap prepared from ricinoleic acid reacted with a minimum excess of potassium hydroxide (KOH, potash). Potassium ricinoleate plays an important role in latex compounds by contributing to the mechanical and chemical stability. O...展开 Octosol 687 is a fatty acid soap prepared from ricinoleic acid reacted with a minimum excess of potassium hydroxide (KOH, potash). Potassium ricinoleate plays an important role in latex compounds by contributing to the mechanical and chemical stability. Octosol 687 is suggested for use as a primary frothing aid in gelled latex foam compounds. It is may also be used as a dispersant for fillers, dry chemicals, and pigments. 收起 | |
| Octosol 730 | Tiarco Chemical | Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce q...展开 Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce quality-frothed adhesives and latex foams. 收起 | |
| Octosol 731 | Tiarco Chemical | Octosol 731 is an anionic, light yellow liquid solution of sodium salt of a carboxylated polyelectrolyte. It serves as an excellent dispersing aid in wide variety of formulations - including carpet back-coatings, dyes, pigments, and clays, as well as with...展开 Octosol 731 is an anionic, light yellow liquid solution of sodium salt of a carboxylated polyelectrolyte. It serves as an excellent dispersing aid in wide variety of formulations - including carpet back-coatings, dyes, pigments, and clays, as well as with inorganic compounds. 收起 | |
| Octosol 828 | Tiarco Chemical | Octosol 828 is a 12-mole sodium lauryl ether sulfate used in emulsion polymerization. It is generally used with high molecular weight polymers, as well as in high acid systems as an emulsifier. This product minimizes the potential for coagulation and is f...展开 Octosol 828 is a 12-mole sodium lauryl ether sulfate used in emulsion polymerization. It is generally used with high molecular weight polymers, as well as in high acid systems as an emulsifier. This product minimizes the potential for coagulation and is formaldehyde free. 收起 | |
| Octosol 853 | Tiarco Chemical | Octosol 853 is an anionic surfactant, in the form of a dark reddish-brown aqueous solution of sulfated fatty acids. It aids in the mechanical and chemical stability of both natural and synthetic latices during compounding, storage, and application. This p...展开 Octosol 853 is an anionic surfactant, in the form of a dark reddish-brown aqueous solution of sulfated fatty acids. It aids in the mechanical and chemical stability of both natural and synthetic latices during compounding, storage, and application. This product is formulated to prevent premature coagulation of the latex under such conditions as high-speed agitation, acidification, or pigmentation. Octosol 853 may also be used for gelation-control. Used as a dipping aid, it ensures uniform film deposits and good penetration. 收起 | |
| Octosol A-18 | Tiarco Chemical | Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, a...展开 Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, and foaming. It is used as a textile-softening agent, as a suspending agent in emulsion polymerization, as a foaming agent in latex compounds, and in cleaning and penetrating formulations. 收起 | |
| Octosol A-18A | Tiarco Chemical | Octosol A-18A is a dispersion of diammonium-n-octadecylsulfosuccinamate in the form of a clear amber to creamy white liquid or paste, depending on storage temperature. It is considered an ideal foaming agent for use in acrylic latex frothed compounds. Bei...展开 Octosol A-18A is a dispersion of diammonium-n-octadecylsulfosuccinamate in the form of a clear amber to creamy white liquid or paste, depending on storage temperature. It is considered an ideal foaming agent for use in acrylic latex frothed compounds. Being an ammonium neutralized surfactant, Octosol A-18A allows for reduced sodium ion content in formulations where such fixed alkali ions are believed to retard the cross-linking cure systems. 收起 | |
| Octosol ALS | Tiarco Chemical | Octosol ALS is an aqueous solution of a ammonium lauryl sulfate, in the form of a pale clear liquid which readily mixes in water. It is an excellent stabilizer, emulsifier, and dispersant for many industrial aqueous systems. | |
| Octosol SLS | Tiarco Chemical | Octosol SLS is a clear aqueous solution of sodium lauryl sulfate, characterized by light color, low odor, a low cloud point, and low salt content. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a ...展开 Octosol SLS is a clear aqueous solution of sodium lauryl sulfate, characterized by light color, low odor, a low cloud point, and low salt content. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and dispersing agent. Octosol SLS is recommended for use as a biodegradable wetting agent, detergent, and emulsion stabilizer. 收起 | |
| Octosol SLS-30K | Tiarco Chemical | Octosol SLS-30K is a clear, water white to pale yellow, aqueous solution of sodium lauryl sulfate preserved with Kathon CG™. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and d...展开 Octosol SLS-30K is a clear, water white to pale yellow, aqueous solution of sodium lauryl sulfate preserved with Kathon CG™. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and dispersing agent. Octosol SLS-30K is recommended for use as a biodegradable wetting agent, detergent, and emulsion stabilizer. 收起 | |
| Octosperse 425 | Tiarco Chemical | Octosperse 425 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concent...展开 Octosperse 425 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concentration suitable for use in a specific formulation. It is suggested that lab testing information be used for acceptable performance levels. 收起 | |
| Octosperse 428 | Tiarco Chemical | Octosperse 428 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concent...展开 Octosperse 428 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concentration suitable for use in a specific formulation. 收起 | |
| Octosperse TS-10 | Tiarco Chemical | Octosperse TS-10 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the f...展开 Octosperse TS-10 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the foaming system. The eventual concentration can be established which is the most economical and efficient for a given system. 收起 | |
| Octosperse TS-30 | Tiarco Chemical | Octosperse TS-30 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the f...展开 Octosperse TS-30 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the foaming system. For starting, it is suggested that in dye becks and wash operations that 1/2 ounce of the defoamer be used per 100 gallons of the process volume. The concentration can then be adjusted to establish the most economical and efficient concentration. 收起 | |
| Octotint 120 | Tiarco Chemical | Octotint 120 is an aqueous dispersion of ultramarine blue, an inorganic pigment having good alkali and heat resistance. This bright hue is opaque in water-based systems and not recommended for acidic systems. Octotint 120 blue is recommended for use in th...展开 Octotint 120 is an aqueous dispersion of ultramarine blue, an inorganic pigment having good alkali and heat resistance. This bright hue is opaque in water-based systems and not recommended for acidic systems. Octotint 120 blue is recommended for use in the rubber latex industry as a bluing agent, applied in very low percentages to intensify whiteness by offsetting yellowish undertones. 收起 | |
| Octotint 435 | Tiarco Chemical | Octotint 435 is an aqueous dispersion of highly refined chroma blue pigments of extremely fine particle size and purity. It can be used with good compatibility in aqueous formulations where its characteristic color is desired. Octotint 435 has pleasing an...展开 Octotint 435 is an aqueous dispersion of highly refined chroma blue pigments of extremely fine particle size and purity. It can be used with good compatibility in aqueous formulations where its characteristic color is desired. Octotint 435 has pleasing and useful color characteristics both in masstone and tint. Its pigment sources display high tinting strength and hiding power. Because it is water-based, dispersibility into a latex system is greatly enhanced while demonstrating excellent handling properties. 收起 | |
| Octotint 725 | Tiarco Chemical | Octotint 725 is a finely divided aqueous dispersion of rutile titanium dioxide pigment, at 60% activity. Titanium dioxide has the greatest hiding power, or opacifying power, of all pigments. It is also inert and noncombustible. Octotint 725 is formulated ...展开 Octotint 725 is a finely divided aqueous dispersion of rutile titanium dioxide pigment, at 60% activity. Titanium dioxide has the greatest hiding power, or opacifying power, of all pigments. It is also inert and noncombustible. Octotint 725 is formulated for direct addition into most latex-based compounds, thus providing the compounder with a ready-to-use, pourable form of TiO2 with improved dispersion properties. 收起 | |
| Octotint 790 | Tiarco Chemical | Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aq...展开 Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aqueous formulations where its characteristic color would be desired. 收起 | |
| Octowax 1500 | Tiarco Chemical | Octowax 1500 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining a...展开 Octowax 1500 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining antioxidants. The wax "blooms" during the cure process from the emulsion to the rubber surface, providing a barrier against ozone attack. Octowax 1500 is designed to be added directly to latex compounds. 收起 | |
| Octowax 17 | Tiarco Chemical | Octowax 17 is a homogenized emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-s...展开 Octowax 17 is a homogenized emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining antioxidants. The wax "blooms" during the cure process from the emulsion to the rubber surface, providing a barrier against ozone attack. Octowax 17 is designed to be added directly to latex compounds. 收起 | |
| Octowax 321 | Tiarco Chemical | Octowax 321 is a paraffin wax emulsion that is typically very stable to shear and heat-stable during drying. Suggested uses include physical modification of cured latex compounds, water resistance improvement, and improved aging characteristics brought ab...展开 Octowax 321 is a paraffin wax emulsion that is typically very stable to shear and heat-stable during drying. Suggested uses include physical modification of cured latex compounds, water resistance improvement, and improved aging characteristics brought about by the addition of this type of wax emulsion to latex. Octowax 321 is designed to be added directly to latex compounds. 收起 | |
| Octowax 5 | Tiarco Chemical | Octowax 5 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining anti...展开 Octowax 5 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining antioxidants. The wax "blooms" during the cure process from the emulsion to the rubber surface, providing a barrier against ozone attack. Octowax 5 is designed to be added directly to latex compounds. 收起 | |
| Octowax MR-40 | Tiarco Chemical | Octowax MR-40 is a light amber-cream colored emulsion of an oxidized, modified hydrocarbon wax. The emulsion is based primarily on a nonionic surfactant, but is a mixture with anionic because of the amine-neutralized reactive components of the wax. Octowa...展开 Octowax MR-40 is a light amber-cream colored emulsion of an oxidized, modified hydrocarbon wax. The emulsion is based primarily on a nonionic surfactant, but is a mixture with anionic because of the amine-neutralized reactive components of the wax. Octowax MR-40 is suggested for use as a mold-release and lubricant. 收起 | |
| Octowet 70 | Tiarco Chemical | Octowet 70 is an anionic surfactant (70% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 70 is an anionic surfactant (70% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 | |
| Octowet 70D | Tiarco Chemical | Octowet 70D is an anionic surfactant solution (DOSS) in water, and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely use...展开 Octowet 70D is an anionic surfactant solution (DOSS) in water, and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 | |
| Octowet 70MS | Tiarco Chemical | Octowet 70MS is an anionic surfactant, 70% DOSS in mineral spirits. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 70MS is an anionic surfactant, 70% DOSS in mineral spirits. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 | |
| Octowet 70PG | Tiarco Chemical | Octowet 70PG is a 70% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 70PG is a 70% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. Additionally, Octowet 70PG is formulated so as to provide the surfactant in a non-flammable aqueous form. 收起 | |
| Octowet 70X | Tiarco Chemical | Octowet 70X is an anionic surfactant (70% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as ...展开 Octowet 70X is an anionic surfactant (70% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 | |
| Octowet 75 | Tiarco Chemical | Octowet 75 is an anionic surfactant (75% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 75 is an anionic surfactant (75% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 | |
| Octowet 75PG | Tiarco Chemical | Octowet 75PG is a 75% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a p...展开 Octowet 75PG is a 75% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 | |
| Octowet 75X | Tiarco Chemical | Octowet 75X is an anionic surfactant (75% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as ...展开 Octowet 75X is an anionic surfactant (75% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 | |
| Reservol Flake | Tiarco Chemical | Reservol Flake is a technically pure sodium m-nitrobenzene sulfonate (SMNBS) in the form of yellow to tan flakes. This product used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continuous equipment. | |
| Reservol Liquid | Tiarco Chemical | Reservol Liquid is a 21% active solution of sodium m-nitrobenzene sulfonate (SMNBS) in water, in the form of a clear yellow liquid. This product is used in used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continu...展开 Reservol Liquid is a 21% active solution of sodium m-nitrobenzene sulfonate (SMNBS) in water, in the form of a clear yellow liquid. This product is used in used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continuous equipment. 收起 | |
| Reservol Powder | Tiarco Chemical | Reservol Powder is a technically pure sodium m-nitrobenzene sulfonate (SMNBS) in the form of a yellow to tan powder. This product used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continuous equipment. | |
| T Gum 102 | Tiarco Chemical | T Gum 102 is an alkali swellable acrylic latex thickener that can be used for any alkaline pH coating. It is handled easily at low pH and develops good viscosity when the total pH is adjusted to the alkaline side. This product has good mechanical stabilit...展开 T Gum 102 is an alkali swellable acrylic latex thickener that can be used for any alkaline pH coating. It is handled easily at low pH and develops good viscosity when the total pH is adjusted to the alkaline side. This product has good mechanical stability and is consistent in the manufacturing process. 收起 | |
| T-Gum 103 | Tiarco Chemical | T-Gum 103 is a sodium polyacrylate thickener used in a wide variety of natural and synthetic latex applications. This product may be used to thicken styrene-butadiene, acrylonitrile, butadiene, acrylic, neoprene, vinyl acetate, and ethylene-vinyl acetate ...展开 T-Gum 103 is a sodium polyacrylate thickener used in a wide variety of natural and synthetic latex applications. This product may be used to thicken styrene-butadiene, acrylonitrile, butadiene, acrylic, neoprene, vinyl acetate, and ethylene-vinyl acetate latex compounds. 收起 | |
| T-Gum 104 | Tiarco Chemical | T-Gum 104 is a sodium polyacrylate thickener used in a wide variety of natural and synthetic latex applications - including carpet backing, latex foam, adhesives, emulsions, textile coatings, non-wovens, and dispersions. This product may be used to thicke...展开 T-Gum 104 is a sodium polyacrylate thickener used in a wide variety of natural and synthetic latex applications - including carpet backing, latex foam, adhesives, emulsions, textile coatings, non-wovens, and dispersions. This product may be used to thicken styrene-butadiene, acrylonitrile, butadiene, neoprene, acrylic, vinyl acetate, and ethylene-vinyl acetate latex compounds. 收起 | |
| T-Gum AHG | Tiarco Chemical | T-Gum AHG is a polyacrylate thickener used in a wide variety of natural and synthetic latex applications. It is especially well-suited to latices with an alkaline reaction. This product may be used to thicken styrene-butadiene, acrylonitrile, butadiene, a...展开 T-Gum AHG is a polyacrylate thickener used in a wide variety of natural and synthetic latex applications. It is especially well-suited to latices with an alkaline reaction. This product may be used to thicken styrene-butadiene, acrylonitrile, butadiene, acrylic, neoprene, vinyl acetate, and ethylene-vinyl acetate latex compounds. 收起 | |
| Automated Discharge Systems | Charles Ross & Son Company | 该Ross排水系统能消除浪费在刮檫来源于混合的重垢或粘性的物质的时间。加装了简捷按钮后，该设施可以在几分钟内将1000加仑每批次的废水装进散装箱内，灌装箱内或者包装设备内，一个挤压机或者两到三个辊压机。 |  |
| Double Planetary Mixer | Charles Ross & Son Company | Ross 60多年以前就已倡导并设计了双重行星式混合器。通过不断的升级改造，这种混合器能够用于粘度高达7,000,000厘泊的产品。并可以根据要求，设计更高速度的混合器。 |  |
| High Shear Mixer | Charles Ross & Son Company | 所有的转子/定子都是由一个固定在定子上的高速转子组成的。在一个单元中，转子包括单独的四片叶子。当旋转叶片通过每一个开着的定子的时候，他们机械的剪切微粒或液滴，在高速下将物质驱开到周围的混合器中，带来极大的压力。 |  |
| High Speed Disperser | Charles Ross & Son Company | ROSS 高速分散机以其耐用、分散速度快和维护成本低的特点成为行业标杆。标准配置包括：防爆装置，变频重型电动机，重型三角皮带传动器和轴承，安全开关，一个带手/足控制的气/油液压升降机，以及不锈钢接液部件和轴承防护罩。设备大小从1/2HP到200HP不等，处理能力分别达到1-200加仑。并可根据客户需求定制。 |  |
| Multi-Shaft Mixer | Charles Ross & Son Company | 我们提供双轴和三轴搅拌机以满足您的特定工艺需求。其中经济型的双轴搅拌机包括一个常规高速分散头和一个双翼锚式搅拌桨。这样的构造适用于简单的分散和搅拌。 |  |
| Planetary Dispersers | Charles Ross & Son Company | 一款结合了行星式叶片和高速分散叶片的专利行星式分散器。行星式和高速分散叶片既绕轴旋转，也绕容器不断旋转。 行星式叶片可将物料直接送入高速轨道分散器的高剪切区。 这种独特的搅拌组合，可以淘汰对于多重搅拌器的需要，即一台机器，两种技术。 |  |
| Powder Induction | Charles Ross & Son Company | 所有的转子/定子都是由一个固定在定子上的高速转子组成的。在一个单元中，转子包括单独的四片叶子。当旋转叶片通过每一个开着的定子的时候，他们机械的剪切微粒或液滴，在高速下将物质驱开到周围的混合器中，带来极大的压力。 |  |
| PreMax | Charles Ross & Son Company | 这种单极转子/定子发电机是在间隙式搅拌设备中产生高剪切和蓬勃流的理想之选。Ross PreMax 采用这种Delta转子/定子，能够制造一种机械，液压与气穴剪切的强力结合，从而 产生强劲的松团作用，特别适合颜料的分散。 |  |
| Ribbon Blender | Charles Ross & Son Company | Ribbon 混合器非常适用于粉类产品的混合。双向的ribbon搅拌器可在很短的时间内带来极致的混合。Ross可提供1-100立方英尺的工作量的Ribbon搅拌器。 |  |
| Sanitary Mixers | Charles Ross & Son Company | Ross公司几乎服务于全球每一工业化国家的食品，化妆品和药物领域。我们有着其它特种混合设备制造商难以企及的丰富经验和产能。 |  |
| Static/Motionless Mixers | Charles Ross & Son Company | RossLPD/LLPD(低压降）和ISG（界面表面发生器）静态混合器由于在湍流和层流混合应用领域的广泛使用而闻名。 |  |
| Systems And Controls | Charles Ross & Son Company | Ross 系统和控制（SynCon）是全球领先的控制系统供应商。我们供应从简单的开/关切换，到精细的基于菜单系统的PLC程序包。无论是标准或自定义，每一系统，都是专为满足客户具体需求而设。 |  |
| Three Roll Mill | Charles Ross & Son Company | 80多年前，ROSS创造出第一台三辊研磨机，带来革命性的颜料分散技术，使得分散料体的一致性和精细度达到前所未有的程度。如今，这种三辊研磨机依然是同类产品中的行业标杆，在诸如磁性涂料，化妆品，油漆，油墨和高品质陶瓷行业中有着广泛应用。 |  |
| Tumble Blenders | Charles Ross & Son Company | Ross 滚筒混合器具有大量的标准功能特点，包括：316-不锈钢双锥形设计，手动蝶阀设计达到放电 - 24”放电间隙，铰链式不锈钢加料口，内部表面进行了镜面抛光，外表面150磨砂处理，而对于非不锈钢组件，使用持久的双组分油漆涂装。 |  |
| Vertical Blender | Charles Ross & Son Company | 当你的产品对剪切敏感，或者工艺参数要求比较苛刻时，Ross 立式混合器是一款设计优越的替换方案。是那些要求最小混合影响产品的最佳选择。在同样的工作容积中，慢速旋转混合的动作要远比螺条混合器中的搅拌温和。 |  |
