UL Prospector

成功!

成功保存搜索结果
Acetone TOP Solvent Company Limited Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent p...展开 Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent properties for vegetable and animal fats, cellulose, natural and synthetic resins and many other organic substances. The primary use for this product is in printing inks, adhesives, paints and coatings. 收起
Aliphatic 6/15 Braskem S.A. Aliphatic 6/15 is an aliphatic solvent.
Butyl Glycol Ether (BGE) TOP Solvent Company Limited Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenate...展开 Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenated solvents, as well as with aliphatic and aromatic hydrocarbons and oils. It is solvent for many natural and synthetic resins, nitrocellulose and ethyl cellulose. Butyl Glycol Either (BGE) is primarily used as a solvent in printing inks, paints and coatings. 收起
Calfax® 10L-45 Pilot Chemical Calfax® 10L-45 is a light amber, water soluble surface active agent that contains no halogenated solvents. It is an aqueous surfactant solution that is compatible with a broad range of high electrolyte solutions such as brine, bleach, caustic and inorgani...展开 Calfax® 10L-45 is a light amber, water soluble surface active agent that contains no halogenated solvents. It is an aqueous surfactant solution that is compatible with a broad range of high electrolyte solutions such as brine, bleach, caustic and inorganic acids. The high surface activity and the high electrolyte tolerance of Calfax® 10L-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification system under conditions that would not be usable with conventional surface active agents, permitting greater control over latex molecular weight and particle size. 收起
Calfax® 10LA-75 Pilot Chemical Calfax® 10LA-75 is a amber, viscous soluble surface active agent that contains no halogenated solvents. Calfax® 10LA-75 is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side cha...展开 Calfax® 10LA-75 is a amber, viscous soluble surface active agent that contains no halogenated solvents. Calfax® 10LA-75 is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 10LA-75 promotes emulsification and solubility in organic solvents. It is recommended that Calfax® 10LA-75 be added to water, if a dilution is needed, as high viscosity occurs when water is added to the Calfax® 10LA-75. The high electrolyte tolerance and surface activity of Calfax® 10LA-75 make it the surfactant of choice for making latex emulsions for adhesives and foam rubber. 收起
Calfax® 16L-35 Pilot Chemical Calfax® 16L-35 is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate, which has a clear light amber appearance and contains no halogenated solvents. Calfax® 16L-35 offers superior solubility and stability in electrolyte solutions such as b...展开 Calfax® 16L-35 is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate, which has a clear light amber appearance and contains no halogenated solvents. Calfax® 16L-35 offers superior solubility and stability in electrolyte solutions such as brine, bleach, caustic and inorganic acids. The long, linear side chain promotes lower critical micelle concentration (CMC), higher surface tension and lower foam stability than the other Calfax® products. Calfax® 16L-35 offers substantially less foam than shorter chain disulfonates. It is an efficient emulsifier for ABS resins and styrene-butadiene latex, among others. 收起
Calfax® 6LA-70 Pilot Chemical Calfax® 6LA-70 is a clear amber liquid surface active agent that contains no halogenated solvents. It is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 6LA-...展开 Calfax® 6LA-70 is a clear amber liquid surface active agent that contains no halogenated solvents. It is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 6LA-70 promotes emulsification and solubility in organic solvents. This product is effective as a solubilizer, coupler and hydrotrope for use in acid and alkaline cleaners where conventional surfactants don't have enough solubility. It also finds application in glass cleaners, concentrated laundry detergents, kitchen and bath cleaners, pot and pan, hard surface cleaners and concrete cleaners. 收起
Calfax® DB-45 Pilot Chemical Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sod...展开 Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sodium carbonate and sodium metasilicate. The high surface activity and the high electrolyte tolerance of Calfax® DB-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification process under conditions that would not be usable with conventional surface active agents, permitting greater control over latex’s molecular weight and particle size. Calfax® DB-45 also aids in improving a latex emulsion’s thermal and mechanical stability. 收起
Cyclohexane Braskem S.A. Cyclohexane is a cyclic aliphatic hydrocarbon solvent.
Dicyclopentadiene Braskem S.A. Dicyclopentadiene is a colorless hydrocarbon liquid.
Ethyl Acetate (EA) TOP Solvent Company Limited Ethyl acetate (EA) is a neutral colorless liquid with a pleasantly fruity odor. Ethyl acetate is primarily used in the production of nitrocellulose and cellulose acetate lacquers and as a solvent in adhesives and coatings.
Ezolem 6/13 Braskem S.A. Ezolem 6/13 is a solvent for rubber.
Ezolem 6/17 Braskem S.A. Ezolem 6/17 is an aliphatic hydrocarbon solvent.
Ezolem 6/7 Braskem S.A. Ezolem 6/7 is an aliphatic solvent.
Ezolem 7/9 Braskem S.A. Ezolem 7/9 is a light aliphatic solvent.
HS-100 Braskem S.A. HS-100 is an aromatic hydrocarbon solvent.
Isopropanol (IPA) TOP Solvent Company Limited Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropi...展开 Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropic mixtures with water and many organic liquids. It is used in printing inks, adhesives, paints and coatings. 收起
MASURF® FS-3330 Pilot Chemical MASURF® FS-3330 is characterized as a 100% active C6-based ammonium fluoroaliphatic phosphate ester in an aqueous solution. FS-3330 contributes exceptional oil resistance, rheology and surface modification, spreading and leveling properties to a wide rang...展开 MASURF® FS-3330 is characterized as a 100% active C6-based ammonium fluoroaliphatic phosphate ester in an aqueous solution. FS-3330 contributes exceptional oil resistance, rheology and surface modification, spreading and leveling properties to a wide range of systems from wood to stone. This product imparts oil and water repellency, stain resistance and antiblock performance to solvent-based coatings, alkyds, and stains. 收起
MASURF® FS-3330A Pilot Chemical MASURF® FS-3330A is characterized as a 30% active C6-based ammonium fluoroaliphatic phosphate ester in an aqueous solution. FS-3330A contributes exceptional oil resistance, rheology and surface modification, spreading and leveling properties to a wide ran...展开 MASURF® FS-3330A is characterized as a 30% active C6-based ammonium fluoroaliphatic phosphate ester in an aqueous solution. FS-3330A contributes exceptional oil resistance, rheology and surface modification, spreading and leveling properties to a wide range of systems from wood to stone. When formulated into aqueous floor finishes and sealers, the simple addition of 25-50ppm active FS-3330A imparts wetting and leveling with demonstrable oil and grease resistance. It imparts protective oil and grease resistance to wood, concrete, stone and tile surfaces used as building materials, including kitchens, flooring and bathrooms. 收起
Masurf® FS-1620 Pilot Chemical Masurf® FS-1620 is characterized as a 20% active fluoroaliphatic quaternary ammonium C6-based fluorosurfactant in an aqueous solution. As a cationic surfactant, this product is a superior surface tension and interfacial tension reduction agent with substa...展开 Masurf® FS-1620 is characterized as a 20% active fluoroaliphatic quaternary ammonium C6-based fluorosurfactant in an aqueous solution. As a cationic surfactant, this product is a superior surface tension and interfacial tension reduction agent with substantive surface properties similar to alkyl quaternaries. It is substantive to metal and siliceous surfaces for use in polishes and corrosion inhibitors. Masurf® FS-1620 can also be used as a leveling and coalescent aid in aqueous polymer latex coatings. 收起
Masurf® FS-2800 Pilot Chemical Masurf® FS-2800 is characterized as a 100% active aqueous fluoroaliphatic polyoxyethylene surfactant dispersion. FS-2800 is a C6-based nonionic fluorosurfactant with the ability to contribute exceptional wetting, spreading and leveling properties to a wid...展开 Masurf® FS-2800 is characterized as a 100% active aqueous fluoroaliphatic polyoxyethylene surfactant dispersion. FS-2800 is a C6-based nonionic fluorosurfactant with the ability to contribute exceptional wetting, spreading and leveling properties to a wide range of systems. With typical use levels of 50-500ppm, it is effective at very low concentrations, and together with traditional hydrocarbon surfactants, can contribute properties not possible with either material alone. This product is stable in anionic and cationic systems, effective in high or low pH, and recommended in a wide range of applications. Useful in Water-Based Latex Paints to extend opentime (wet-edge time). In high performance polymer and non-aqueous resin systems, FS-2800 acts as a coupling agent for fillers, imparts anti-soiling performance and allows wetting of low energy surfaces. 收起
Masurf® FS-2825 Pilot Chemical Masurf® FS-2825 is characterized as a 25% active aqueous fluoroaliphatic polyoxyethylene surfactant dispersion. FS-2825 is a C6-based nonionic fluorosurfactant with the ability to contribute exceptional wetting, spreading and leveling properties to a wide...展开 Masurf® FS-2825 is characterized as a 25% active aqueous fluoroaliphatic polyoxyethylene surfactant dispersion. FS-2825 is a C6-based nonionic fluorosurfactant with the ability to contribute exceptional wetting, spreading and leveling properties to a wide range of systems. With typical use levels of 50-500ppm, it is effective at very low concentrations, and together with traditional hydrocarbon surfactants, can contribute properties not possible with either material alone. This product is stable in anionic and cationic systems, effective in high or low pH, and recommended in a wide range of applications. Masurf® FS-2825 is useful in water-based latex paints to extend opentime (wet-edge time). In high performance polymer and non-aqueous resin systems, FS-2825 acts as a coupling agent for fillers, imparts anti-soiling performance and allows wetting of low energy surfaces. 收起
Masurf® FS-2900 Pilot Chemical Masurf® FS-2900 is characterized as a 100% active aqueous fluoroaliphatic polyoxyethylene surfactant dispersion. FS-2900 is a C6-based nonionic fluorosurfactant with the ability to contribute exceptional wetting, spreading and leveling properties to a wid...展开 Masurf® FS-2900 is characterized as a 100% active aqueous fluoroaliphatic polyoxyethylene surfactant dispersion. FS-2900 is a C6-based nonionic fluorosurfactant with the ability to contribute exceptional wetting, spreading and leveling properties to a wide range of systems. With typical use levels of 50-500ppm, it is effective at very low concentrations, and together with traditional hydrocarbon surfactants, can contribute properties not possible with either material alone. This product is stable in anionic and cationic systems, effective in high or low pH, and recommended in a wide range of applications. It is useful in water-based latex paints to extend opentime (wet-edge time). In high performance polymer and non-aqueous resin systems, FS-2900 acts as a coupling agent for fillers, imparts anti-soiling performance and allows wetting of low energy surfaces. 收起
Masurf® FS-2950 Pilot Chemical Masurf® FS-2950 is characterized as a 50% active aqueous fluoroaliphatic polyoxyethylene surfactant solution. It is a C6-based nonionic fluorosurfactant with the ability to contribute exceptional wetting, spreading and leveling properties to a wide range ...展开 Masurf® FS-2950 is characterized as a 50% active aqueous fluoroaliphatic polyoxyethylene surfactant solution. It is a C6-based nonionic fluorosurfactant with the ability to contribute exceptional wetting, spreading and leveling properties to a wide range of systems. With typical use levels of 50-500ppm, this product is effective at very low concentrations, and together with traditional hydrocarbon surfactants, can contribute properties not possible with either material alone. Masurf® FS-2950 is stable in anionic and cationic systems, effective in high or low pH, and recommended in a wide range of applications. It is useful in water-based latex paints to extend opentime (wet-edge time). In high performance polymer and non-aqueous resin systems, FS-2950 acts as a coupling agent for fillers, imparts anti-soiling performance and allows wetting of low energy surfaces. 收起
Masurf® FS-630 Pilot Chemical Masurf® FS-630 is characterized as a 30% active C-6 Based fluoroaliphatic sodium sulfosuccinate in either a water/glycol ether solution (EB) or a water/2-(2-butoxyethoxy) ethanol solution (DB). With typical use levels of 50-500ppm, it is effective at very...展开 Masurf® FS-630 is characterized as a 30% active C-6 Based fluoroaliphatic sodium sulfosuccinate in either a water/glycol ether solution (EB) or a water/2-(2-butoxyethoxy) ethanol solution (DB). With typical use levels of 50-500ppm, it is effective at very low concentrations, and together with traditional hydrocarbon surfactants, can contribute properties not possible with either material alone. This product is a superior surface tension and interfacial tension reduction agent for wetting and leveling performance unobtainable with silicone, acetylenic or traditional hydrocarbon surfactants. The superior wetting performance of Masurf® FS-630 results in improved film uniformity in floor finishes, water-based coatings, and as an additive in fiber finishes. 收起
Masurf® UV-350 Pilot Chemical Masurf® UV-350 is an Ultraviolet Light Absorber for non-polar, hydrocarbon solvent systems, designed to impart UV protection to fabrics and hard surfaces. Utilizing proven and accepted benzotriazole UV absorber chemistry, this product is easy to use and h...展开 Masurf® UV-350 is an Ultraviolet Light Absorber for non-polar, hydrocarbon solvent systems, designed to impart UV protection to fabrics and hard surfaces. Utilizing proven and accepted benzotriazole UV absorber chemistry, this product is easy to use and highly efficient, because it is applied from a solution. Masurf® UV-350 is readily dissolvable in hydrocarbon solvents which provides a uniform coverage compared to other UV absorbers that form unstable, large particle size dispersions and yield non-uniform surface coverage. Unlike aqueous based UV absorbers, this product is not water soluble, so it will not readily wash off exterior surfaces. 收起
Methanol TOP Solvent Company Limited Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is...展开 Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is in printing inks, paints and coatings as solvents, thinners, denaturant for ethanol and producing biodiesel. 收起
Methyl Ethyl Ketone (MEK) TOP Solvent Company Limited Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces sol...展开 Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces solutions with low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起
Methyl Isobutyl Ketone (MIBK) TOP Solvent Company Limited Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic...展开 Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic resins and can produce solutions of low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起
Methylene Chloride TOP Solvent Company Limited Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with...展开 Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with water. It has solvent properties with most organic chemicals and materials. This product is primarily used as a solvent in paints and coatings. 收起
Mixed Xylene Braskem S.A. Mixed Xylene is an aromatic hydrocarbon solvent.
N-Butyl Acetate (BA) TOP Solvent Company Limited N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is prim...展开 N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is primarily used as a solvent in printing inks, adhesives, paints and coatings. 收起
Noneno Braskem S.A. Noneno is a clear hydrocarbon liquid.
PIB 10 Braskem S.A. PIB 10 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 10 is a non-toxic polymer.
PIB 122 Braskem S.A. PIB 122 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 122 is a non-toxic polymer.
PIB 128 Braskem S.A. PIB 128 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 128 is a non-toxic polymer.
PIB 16 Braskem S.A. PIB 16 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins.
PIB 24 Braskem S.A. PIB 24 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 24 is a non-toxic polymer.
PIB 240 Braskem S.A. PIB 240 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 240 is a non-toxic polymer.
PIB 30 Braskem S.A. PIB 30 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 30 is a non-toxic polymer.
PIB 32 Braskem S.A. PIB 32 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 32 is a non-toxic polymer.
PIB 4 Braskem S.A. PIB 4 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 4 is a non-toxic polymer.
PIB 6 Braskem S.A. PIB 6 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 6 is a non-toxic polymer.
PIB 8 Braskem S.A. PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer.
Pluract 10+ Braskem S.A. Pluract 10+ is an aromatic hydrocarbon solvent.
Pluract 12+ Braskem S.A. Pluract 12+ is a hydrocarbon solvent.
Pluract 9 Braskem S.A. Pluract 9 is an aromatic hydrocarbon solvent.
S-Butyl Acetate (SBA) TOP Solvent Company Limited S-Butyl acetate (SBA) is a transparent volatile liquid with a distinguishing ester odor. It is miscible in various solvents such as alcohols, ketones, glycol ethers, aromatic hydrocarbons and aliphatic hydrocarbons. It is primarily used in the producing a...展开 S-Butyl acetate (SBA) is a transparent volatile liquid with a distinguishing ester odor. It is miscible in various solvents such as alcohols, ketones, glycol ethers, aromatic hydrocarbons and aliphatic hydrocarbons. It is primarily used in the producing and the processing of paints, coatings, printing inks, adhesives.. 收起
Sensitis 13/15 Braskem S.A. Sensitis 13/15 is a hydrocarbon solvent.
Sensitis 17/21 Braskem S.A. Sensitis 17/21 is a hydrocarbon solvent.
Sensitis 22/25 Braskem S.A. Sensitis 22/25 is a hydrocarbon solvent.
TOPSol 60/145 TOP Solvent Company Limited TOPSol 60/145 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is widely used in the rubber and related industry. It is solvent with naphtha (petroleum) and light aliphatic and is built up of n-Hexane and Toluene...展开 TOPSol 60/145 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is widely used in the rubber and related industry. It is solvent with naphtha (petroleum) and light aliphatic and is built up of n-Hexane and Toluene making it a highly flammable liquid. TOPSol 60/145 is primarily used as a solvent in adhesives and sealants. 收起
TOPSol A100 TOP Solvent Company Limited TOPSol A100 Solvent is a clear transparent liquid with an aromatic odor. It has a wide boiling range and is a mixture of predominantly C9 hydrocarbons with 98% aromatic. It has good solvent properties and is low in sulfur content. This product is primaril...展开 TOPSol A100 Solvent is a clear transparent liquid with an aromatic odor. It has a wide boiling range and is a mixture of predominantly C9 hydrocarbons with 98% aromatic. It has good solvent properties and is low in sulfur content. This product is primarily used as a solvent in paints and coatings. 收起
TOPSol A150 TOP Solvent Company Limited TOPSol A150 Solvent is a clear transparent liquid with an aromatic odor. It has a high boiling point and is a mixture of predominantly C9-11 hydrocarbons with >98% aromatic. It has good solvent properties and is low in sulfur content and has a high flash ...展开 TOPSol A150 Solvent is a clear transparent liquid with an aromatic odor. It has a high boiling point and is a mixture of predominantly C9-11 hydrocarbons with >98% aromatic. It has good solvent properties and is low in sulfur content and has a high flash point. This product is primarily used as a solvent in paints and coatings. 收起
TOPSol A150ND TOP Solvent Company Limited TOPSol A150ND Solvent is a clear transparent liquid with an aromatic odor. This product is a mixture of predominantly C9-10 with aromatic hydrocarbons and it has less that 1% naphthalene content. It has good solvent properties and is low in sulfur content...展开 TOPSol A150ND Solvent is a clear transparent liquid with an aromatic odor. This product is a mixture of predominantly C9-10 with aromatic hydrocarbons and it has less that 1% naphthalene content. It has good solvent properties and is low in sulfur content and has a high flash point. This product is primarily used as a solvent in paints and coatings. 收起
TOPSol BF TOP Solvent Company Limited TOPSol BF is a transparent liquid that is a quick evaporating hydrocarbon solvent. This product is a solvent that has undergone a great degree of general refining that result in a low level of impurities such as sulfur, olefins, benzene and all aromatics....展开 TOPSol BF is a transparent liquid that is a quick evaporating hydrocarbon solvent. This product is a solvent that has undergone a great degree of general refining that result in a low level of impurities such as sulfur, olefins, benzene and all aromatics. TOPSol BF is primarily used as a solvent in adhesives and sealants. 收起
TOPSol PM TOP Solvent Company Limited TOPSol PM also sometimes known as Propylene glycol methyl ether (PGME), is a colorless, hygroscopic solvent with a similar properties to ethylene oxide-based glycol ethers such as the volatility, viscosity and solvent strength. TOPSol PM is primarily used...展开 TOPSol PM also sometimes known as Propylene glycol methyl ether (PGME), is a colorless, hygroscopic solvent with a similar properties to ethylene oxide-based glycol ethers such as the volatility, viscosity and solvent strength. TOPSol PM is primarily used as a solvent in printing inks, adhesives, paints and coatings. 收起
TOPSol PMA TOP Solvent Company Limited TOPSol PMA is also known as Propylene glycol methyl ether acetate (PGMEA). This product is a colorless, neutral propylene oxide-based glycol ether acetate and has a slight odor and a volatility. It has a viscosity and solvent power that is similar to ethy...展开 TOPSol PMA is also known as Propylene glycol methyl ether acetate (PGMEA). This product is a colorless, neutral propylene oxide-based glycol ether acetate and has a slight odor and a volatility. It has a viscosity and solvent power that is similar to ethylene glycol-based and glycol ether acetates. TOPSol PMA is primarily used as a solvent in printing inks, paints and coatings. 收起
TOPSol X2000 TOP Solvent Company Limited TOPSol X2000 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is broadly used in the rubber and related industry. TOPSol X2000 is primarily used as a solvent in adhesives and sealants.
Tetrâmero Braskem S.A. Tetrâmero is used in the formulation of industrial detergents and additives for lubricating oils.
Toluene Braskem S.A. Toluene is an aromatic hydrocarbon solvent.
Toluene TOP Solvent Company Limited Toluene is a clear fast evaporating, highly refined aromatic solvent on a technical grade. This product meets many specifications such as that of Nitration grade Toluene (ASTM D841). The boiling range of this flexible solvent is not broader than 1.0°C. I...展开 Toluene is a clear fast evaporating, highly refined aromatic solvent on a technical grade. This product meets many specifications such as that of Nitration grade Toluene (ASTM D841). The boiling range of this flexible solvent is not broader than 1.0°C. In some areas this solvent is hard to come by. The primary use of this product is in printing inks, adhesives, paints and coatings. 收起
UNILENE® A100 Braskem S.A. UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起
UNILENE® A80 Braskem S.A. UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...展开 UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起
UNILENE® A90 Braskem S.A. UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...展开 UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起
UNILENE® B100 Braskem S.A. UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起
UNILENE® B110 Braskem S.A. UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起
UNILENE® B120 Braskem S.A. UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起
UNILENE® BS130 Braskem S.A. UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...展开 UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起
UNILENE® BS140 Braskem S.A. UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...展开 UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起
WS 200 TOP Solvent Company Limited WS 200 is a clear colored mineral liquid that is derived from petroleum. The White spirit range consists of products that are water-white and typically boil between 150 and 200°C. WS 200 is a combination of natural gases like paraffins, cycloparaffins and...展开 WS 200 is a clear colored mineral liquid that is derived from petroleum. The White spirit range consists of products that are water-white and typically boil between 150 and 200°C. WS 200 is a combination of natural gases like paraffins, cycloparaffins and aromatics.The primary use of this product is in printing inks, paints and coatings. 收起
White Spirit Braskem S.A. White Spirit is a white mineral spirit.
Xylene TOP Solvent Company Limited Xylene is a clear is a quick evaporating hydrocarbon solvent that has a flash point >21°C. It consists essentially of the three different isomers which are ortho, meta and para xylene. This product also contains the organic compound ethylbenzene which is ...展开 Xylene is a clear is a quick evaporating hydrocarbon solvent that has a flash point >21°C. It consists essentially of the three different isomers which are ortho, meta and para xylene. This product also contains the organic compound ethylbenzene which is highly flammable and has a similar odor to gasoline. Xylene is primarily used in printing inks, adhesives, paints and coatings. 收起
YGA100-1 Nanjing Yuangang Fine Chemical Co., Ltd. YGA100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives.
YGA100-2 Nanjing Yuangang Fine Chemical Co., Ltd. YGA100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives.
YGA110-1 Nanjing Yuangang Fine Chemical Co., Ltd. YGA110-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives.
YGA110-2 Nanjing Yuangang Fine Chemical Co., Ltd. YGA110-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives.
YGB100-1 Nanjing Yuangang Fine Chemical Co., Ltd. YGB100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in hot melt road marking paints to increase toughness, hardness, and adhesion.
YGB100-2 Nanjing Yuangang Fine Chemical Co., Ltd. YGB100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in hot melt road marking paints to increase toughness, hardness, and adhesion.