| 15% POTASSIUM HEX-CEM | OMG Borchers GmbH | 一种2-乙基己酸钾盐，溶解于二甘醇，它可与钴结合促进不饱和聚酯的催化反应。它可以减少由于钴引起的UPS体系的色变问题。它也可进一步稳定流变性和可使用时间，或水性双组份PUR体系，另外它可改善这些涂料体系的雾影值 | |
| 21% COBALT HYDROXY TEN-CEM | OMG Borchers GmbH | 21% COBALT HYDROXY TEN-CEM是一种牺牲型催干剂，浆状。它可稳定通过氧化催干的溶剂型油漆体系的催干效果。该产品与催干剂的分解同步，以可控的方式起作用，但不影响油漆体系的初始催干效果，对于涂膜没有不良影响 | |
| Additive OF | OMG Borchers GmbH | 一种透明的水样液体，带有类似酯的气味，用在聚氨酯涂料中以约束水分。 | |
| Additive TI | OMG Borchers GmbH | 一种低粘度单官能异氰酸酯，与水反应生成一种惰性酰胺。用于去除聚氨酯涂料配方中的微量水分，防止由于潮湿产生的问题。 | |
| Aromatic Urethane Hexaacrylate SM6329 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | SM6329是一种芳香族聚氨酯六丙烯酸酯。它提供了很高的反应性和硬度，并提供了耐磨性和耐化学性。SM6329广泛用于UV固化涂料、粘合剂和油墨。 | |
| Ascinin® Anti Skin 0444 | OMG Borchers GmbH | 它是一种新型抗结皮助剂，用于溶剂型涂料、印刷油墨和颜料色浆，以及低VOC高固含量油漆，基于醇酸树脂、环氧 酯和其它氧气干燥主体树脂。 | |
| Ascinin® Anti Skin 0445 | OMG Borchers GmbH | 它是一种用于溶剂型和水性氧气干燥涂料的新型抗结皮助剂。含有特殊的高抗氧化能力的活性成分化合物。 | |
| Ascinin® P | OMG Borchers GmbH | 取代酚的二甲苯、正丁醇溶液。用于透明、着色漆和基于干性油醇酸树脂油漆的抗结皮助剂。用于底漆时可防止外涂层起皮。消除烘干漆的表面缺陷。 | |
| Ascinin® Special | OMG Borchers GmbH | 一种替代苯酚、溶于二甲苯的挥发性肟和正丁醇的混合物。作为抗起皮助剂，用在基于干性油或醇酸树脂的透明和着色油漆中。 | |
| Bayoxide® Z active | OMG Borchers GmbH | 氧化锌。 | |
| Benzidine Orange R | Emperor Pigment Co., Ltd. | Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, a...展开 Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, and an EU number of 229-388-1. 收起 | |
| Benzidine Yellow 121H | Emperor Pigment Co., Ltd. | Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in PA inks, NC inks, PP inks, and Toluene based inks. 收起 | |
| Benzidine Yellow DHG | Emperor Pigment Co., Ltd. | Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, an...展开 Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. 收起 | |
| Benzidine Yellow G | Emperor Pigment Co., Ltd. | Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0,...展开 Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-A | Emperor Pigment Co., Ltd. | Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-B | Emperor Pigment Co., Ltd. | Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. T...展开 Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5 and a pH value of 6.0 to 7.0. 收起 | |
| Benzimidazolone Orange | Emperor Pigment Co., Ltd. | Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100...展开 Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100 grams, and is used in paints and printing inks. 收起 | |
| Benzimidazolone Orange HL | Emperor Pigment Co., Ltd. | Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a den...展开 Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a density value of 1.4 and a pH value of 6.5. 收起 | |
| BIOPOL BR 14 | Chemipol | BIOPOL BR 14 is a broad range in-can preservative based on BRONOPOL, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. BIOPOL BR 14 is a cost-effective product with a broad range of activ...展开 BIOPOL BR 14 is a broad range in-can preservative based on BRONOPOL, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. BIOPOL BR 14 is a cost-effective product with a broad range of activity. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL BR 14 does not release formaldehyde. BIOPOL BR 14 is stable in a broad range of pH and temperatures. BIOPOL BR 14 is fully soluble in water and most of the polar solvents. 收起 | Request Sample |
| BIOPOL BR 30 | Chemipol | BIOPOL BR 30 is a broad range in-can preservative based on BRONOPOL, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. BIOPOL BR 14 is a cost-effective product with a broad range of activ...展开 BIOPOL BR 30 is a broad range in-can preservative based on BRONOPOL, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. BIOPOL BR 14 is a cost-effective product with a broad range of activity. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL BR 30 does not release formaldehyde. BIOPOL BR 30 is stable in a broad range of pH and temperatures. BIOPOL BR 30 is fully soluble in water and most of the polar solvents. 收起 | Request Sample |
| BIOPOL BR 50 | Chemipol | BIOPOL BR 50 is a broad range in-can preservative based on CMIT/MIT and (Benzyloxy)Methanol, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic...展开 BIOPOL BR 50 is a broad range in-can preservative based on CMIT/MIT and (Benzyloxy)Methanol, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL BR 50 is a cost-effective preservative with a broad range of activity. BIOPOL BR 50 is an AOX & Formaldehyde free preservative. BIOPOL BR 50 is stable in a broad range of pH and temperatures. Especially appropriate for warm weather zones. 收起 | Request Sample |
| BIOPOL C 15 | Chemipol | BIOPOL C 15 is a broad range in-can preservative based on CMIT/MIT adsorbed on Caolin, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paint...展开 BIOPOL C 15 is a broad range in-can preservative based on CMIT/MIT adsorbed on Caolin, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL C 15 is formulated in powder form and it is AOX & VOC free. It is a formaldehyde free, cost-effective preservative. Especially appropriate for warm weather zones. As the preservative is water dispersible, it is not recommended for transparent products. 收起 | Request Sample |
| BIOPOL FI 31 | Chemipol | BIOPOL FI 31 is a broad range in-can preservative based on CMIT/MIT and formaldehyde, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL FI 31 is a cost-effective preservative. Its ...展开 BIOPOL FI 31 is a broad range in-can preservative based on CMIT/MIT and formaldehyde, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL FI 31 is a cost-effective preservative. Its balanced composition guarantees long-term preservation and quick biocidal action. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL FI 31 is stable in a broad range of pH and temperatures. 收起 | Request Sample |
| BIOPOL IB 61 | Chemipol | BIOPOL IB 61 is a broad range in-can preservative based on CMIT/MIT and Bronopol, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fille...展开 BIOPOL IB 61 is a broad range in-can preservative based on CMIT/MIT and Bronopol, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants and detergents. VOC-free product. BIOPOL IB 61 balanced composition guarantees a long-term preservative action and a quick biocidal activity. BIOPOL IB 61 is stable in a broad range of pH and temperatures. Preservative especially well-suited form warm weather zones. 收起 | Request Sample |
| BIOPOL ITS | Chemipol | BIOPOL ITS is a broad range in-can preservative based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, ...展开 BIOPOL ITS is a broad range in-can preservative based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL ITS is VOC & AOX & Formaldehyde free preservative. BIOPOL ITS has a broad range of activity and top stability under high temperatures, until 50ºC. 收起 | Request Sample |
| BIOPOL JL 101R | Chemipol | BIOPOL JL 101R is a broad range in-can preservative based on O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsio...展开 BIOPOL JL 101R is a broad range in-can preservative based on O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL JL 101R is a cost-effective preservative with fast biocidal activity. BIOPOL JL 101R is effective throughout a wide range of pH and temperatures. CMIT/MIT free preservative. Preservatives are especially appropriate for warm weather zones. 收起 | Request Sample |
| BIOPOL JL 75 | Chemipol | BIOPOL JL 75 is a broad range in-can preservative based on N-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions...展开 BIOPOL JL 75 is a broad range in-can preservative based on N-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL JL 75 is a cost-effective preservative with fast biocidal activity. BIOPOL JL 75 is effective throughout a wide range of pH and temperatures. 收起 | Request Sample |
| BIOPOL JM 140L | Chemipol | BIOPOL JM 140L is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 140L is a cost-effective preservative with ...展开 BIOPOL JM 140L is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 140L is a cost-effective preservative with excellent protection of the vapor phase. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants and detergents. BIOPOL JM 140L is stable in a broad range of pH and temperatures. Especially well-suited form warm weather zones. 收起 | Request Sample |
| BIOPOL JM 15 | Chemipol | BIOPOL JM 15 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 15 is a cost-effective preservative with exce...展开 BIOPOL JM 15 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 15 is a cost-effective preservative with excellent protection of the vapor phase. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants and detergents. BIOPOL JM 15 is stable in a broad range of pH and temperatures. Preservatives are especially well-suited for warm weather zones 收起 | Request Sample |
| BIOPOL JM 29 | Chemipol | BIOPOL JM 29 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 29 is a cost-effective preservative. BIOPOL J...展开 BIOPOL JM 29 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 29 is a cost-effective preservative. BIOPOL JM 29 balanced composition guarantees long-term preservation and a quick biocidal action. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL JM JM 29 is stable in a broad range of pH and temperatures. Preservatives specially well-suited form warm weather zones. 收起 | Request Sample |
| BIOPOL K14 | Chemipol | BIOPOL K14 is a non-oxidizing biocidal product based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, g...展开 BIOPOL K14 is a non-oxidizing biocidal product based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX, VOC, CMR, and Formaldehyde free preservatives. Cost-effective product. BIOPOL K14 is stable in a broad range of pH and temperatures. Excellent solution for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL KB | Chemipol | BIOPOL KB is a broad range of in-can preservatives based on CMIT/MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, filler...展开 BIOPOL KB is a broad range of in-can preservatives based on CMIT/MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & Formaldehyde free preservative. Cost-effective product. BIOPOL KB balanced composition guarantees long-term preservation without skin sensitization (H317) labeling. BIOPOL KB is stable in a broad range of pH and temperatures. Preservative especially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL KBB | Chemipol | BIOPOL KBB is a broad range of in-can preservatives based on CMIT/MIT, BIT, and BRONOPOL, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is suitable for plasti...展开 BIOPOL KBB is a broad range of in-can preservatives based on CMIT/MIT, BIT, and BRONOPOL, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & Formaldehyde free preservative. BIOPOL KBB balanced composition guarantees long-term preservation without skin sensitization (H317) labeling. BIOPOL KBB is stable in a broad range of pH and temperatures. Preservatives are especially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL KBJ | Chemipol | BIOPOL KBJ is a broad range of in-can preservatives based on CMIT/MIT, BIT, and BRONOPOL, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic pain...展开 BIOPOL KBJ is a broad range of in-can preservatives based on CMIT/MIT, BIT, and BRONOPOL, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & Formaldehyde free preservative. Cost-effective preservative. BIOPOL KBJ balanced composition guarantees long-term preservation without skin sensitization (EUH208) labeling. BIOPOL KBJ is stable in a broad range of pH and temperatures. Especially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL KF 15 | Chemipol | BIOPOL KF 15 is a broad range in-can preservative based on OIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers...展开 BIOPOL KF 15 is a broad range in-can preservative based on OIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL KF 15 balanced composition guarantees long-term preservation and a quick biocidal action. BIOPOL KF 15 is a cost-effective preservative that requires a low dosage. Preservatives are especially well-suited for warm weather zones. 收起 | Request Sample |
| BIOPOL KF 78 | Chemipol | BIOPOL KF 78 is a broad range in-can preservative based on OIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic paints, fillers, ...展开 BIOPOL KF 78 is a broad range in-can preservative based on OIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL KF 78 balanced composition guarantees long-term preservation and a quick biocidal action. BIOPOL KF 78 is a cost-effective preservative that requires a low dosage. Preservative especially well-suited for warm weather zones. 收起 | Request Sample |
| BIOPOL MSO 35 | Chemipol | BIOPOL MSO 35 is a broad range in-can preservative based on CMIT/MIT and N-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic paints, fil...展开 BIOPOL MSO 35 is a broad range in-can preservative based on CMIT/MIT and N-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL MSO 35 balanced composition guarantees long-term preservation and a quick biocidal action. BIOPOL MSO 35 is excellent to protect the vapor phase of the product. BIOPOL MSO 35 is stable in a broad range of pH and temperatures. 收起 | Request Sample |
| BIOPOL MSO 40 | Chemipol | BIOPOL MSO 40 is a broad range in-can preservative based on CMIT/MIT and formaldehyde donor, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic...展开 BIOPOL MSO 40 is a broad range in-can preservative based on CMIT/MIT and formaldehyde donor, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL MSO 40 balanced composition guarantees a long-term preservation and a quick biocidal action. BIOPOL MSO 40 has a reduced skin sensitization potential. BIOPOL MSO 40 is stable in a broad range of pH and temperatures. 收起 | Request Sample |
| BIOPOL PK 5 | Chemipol | BIOPOL PK 5 is a broad range, solid in-can preservative based on CMIT/MIT and Bronopol adsorbed on Silica, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is s...展开 BIOPOL PK 5 is a broad range, solid in-can preservative based on CMIT/MIT and Bronopol adsorbed on Silica, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL PK 5 is VOC & AOX free preservative. Its balanced composition guarantees long-term preservation and quick biocidal action. Dust free 收起 | Request Sample |
| BIOPOL TC 3 | Chemipol | BIOPOL TC 3 is a broad range in-can preservative based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions,...展开 BIOPOL TC 3 is a broad range in-can preservative based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL TC 3 is an AOX & VOC free preservative. BIOPOL TC 3 is free of formaldehyde. Its balanced composition guarantees a long-term preservative action. BIOPOL TC 3 is stable in a broad range of pH and temperatures. Especially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL TI 158 | Chemipol | BIOPOL TI 158 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is suitable for plastic paint...展开 BIOPOL TI 158 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL TI 158 is a cost-effective preservative with excellent protection of vapor phase. Its balanced composition guarantees a long-term preservative action. BIOPOL TI 158 is stable in a broad range of pH and temperatures. 收起 | Request Sample |
| BIOPOL TRC 150 | Chemipol | BIOPOL TRC 150 is a broad-range, solid in-can preservative based on MIT and BIT adsorbed in kaolin, specifically designed to avoid microbial growth and damage caused by microorganisms in technical products such as ceramics, glazes, or any aqueous suspensi...展开 BIOPOL TRC 150 is a broad-range, solid in-can preservative based on MIT and BIT adsorbed in kaolin, specifically designed to avoid microbial growth and damage caused by microorganisms in technical products such as ceramics, glazes, or any aqueous suspension susceptible to colonized by bacteria. BIOPOL TRC 150 balanced composition guarantees a long-term preservation action. BIOPOL TRC 150 is a cost-effective preservative effective in a broad range of pH and temperatures. 收起 | Request Sample |
| BIOPOL VR 20 | Chemipol | BIOPOL VR 20 is a broad range in-can preservative based on BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glu...展开 BIOPOL VR 20 is a broad range in-can preservative based on BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX, VOC, CMIT/MIT, and Formaldehyde free preservatives. Cost-effective product. BIOPOL VR 20 balanced composition guarantees a long-term preservation action. BIOPOL VR 20 is stable in a broad range of pH and temperatures. Preservative especially appropriate for formaldehyde-sensible products 收起 | Request Sample |
| BIOPOL XM | Chemipol | BIOPOL XM is a broad range in-can preservative based on MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions...展开 BIOPOL XM is a broad range in-can preservative based on MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & VOC & Formaldehyde free preservative. Cost-effective preservatives are effective throughout a wide range of pH, from 2 to 10. BIOPOL XM balanced composition guarantees a long-term preservation action. Preservatives are especially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL XMD 5050 | Chemipol | BIOPOL XMD 5050 is a broad range in-can preservative based on MIT/BIT and Bronopol, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fil...展开 BIOPOL XMD 5050 is a broad range in-can preservative based on MIT/BIT and Bronopol, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants and detergents. BIOPOL XMD 5050 is an AOX & VOC free preservative. BIOPOL XMD 5050 is effective throughout a wide range of pH, from 2 to 10. BIOPOL XMD 5050 is stable in a broad range of pH and temperatures. Preservative specially well-suited for warm weather zones. 收起 | Request Sample |
| BIOPOL XMO 210 | Chemipol | BIOPOL XMO 210 is a broad range in-can preservative based on MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, e...展开 BIOPOL XMO 210 is a broad range in-can preservative based on MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & VOC & Formaldehyde free preservative. Cost-effective preservatives effective throughout a wide range of pH, from 2 to 10. BIOPOL XMO 210 balanced composition guarantees a long-term preservation action. BIOPOL XMO 210 is stable in a broad range of pH and temperatures. Specially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| Bisphenol A Epoxy Diacrylate SM6104 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | SM6104是标准双酚A环氧丙烯酸酯。它带来低粘度与浅色，并且提供高光泽，硬度和优良的耐化学性。本产品广泛应用于紫外线涂料、油墨和粘合剂等。 | |
| Bisphenol A Epoxy Resin SM601 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM601 is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM601R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM601R is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM602R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM602R is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM603R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM603R is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM603RP | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM603RP is a medium molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM604R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM604R is a medium molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM607 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM607 is a medium molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM607R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM607R is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM609 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM609 is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM6091 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM6091 is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM609R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM609R is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM6101 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM6101 is a transparent liquid without obvious mechanical impurity and a moderate viscosity. It can be used for the coatings industry. | |
| Bisphenol A Epoxy Resin SM618 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM618 is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting comp...展开 Bisphenol A Epoxy Resin SM618 is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting compounds and laminated material. 收起 | |
| Bisphenol A Epoxy Resin SM634 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM634 is an unmodified semi-solid diglycidyl ether of Bisphenol A. It is used in high solid protective coatings, tank linings, adhesives, coal tar based coatings and flooring. | |
| Bisphenol A Epoxy Resin SM634H | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM634H is a transparent semi-solid without obvious mechanical impurity. It is used in casting material, coatings and reinforced plastic products. | |
| Bisphenol A Epoxy Resin SM638 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM638 is an unmodified semi-solid diglycidyl ether of Bisphenol A. It is used in high solid protective coatings, electrical castings and adhesives. | |
| Bisphenol A Epoxy Resin SM815CA | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM815CA is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting co...展开 Bisphenol A Epoxy Resin SM815CA is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting compounds and laminated material. 收起 | |
| Bisphenol A Epoxy Resin SM827 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM827 is an unmodified high purity, medium viscosity, general purpose diglycidyl ether of Bisphenal A. It has lower viscosity, lower reactivity with amines and anhydrides. It is used in high solid solvent free coatings, potting, la...展开 Bisphenol A Epoxy Resin SM827 is an unmodified high purity, medium viscosity, general purpose diglycidyl ether of Bisphenal A. It has lower viscosity, lower reactivity with amines and anhydrides. It is used in high solid solvent free coatings, potting, laminates, electrical and electronics. 收起 | |
| Bisphenol A Epoxy Resin SM828 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM828 is an unmodified liquid diglycidyl ether of Bisphenol A. It provides excellent mechanical strength and chemical resistance in a cured state. It has a very low level of ionic impurities and can be used in adhesives, grouts, CE...展开 Bisphenol A Epoxy Resin SM828 is an unmodified liquid diglycidyl ether of Bisphenol A. It provides excellent mechanical strength and chemical resistance in a cured state. It has a very low level of ionic impurities and can be used in adhesives, grouts, CED paints, potting, solvent-free coatings, electrical and electronics. 收起 | |
| Bisphenol A Epoxy Resin SM828S | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM828S is an unmodified liquid epoxy resin reaction product of Bisphenol A and epichlorohydrin. It shows much better crystallization resistance compared for standard liquid resin. When it is cured with the appropriate hardener, it ...展开 Bisphenol A Epoxy Resin SM828S is an unmodified liquid epoxy resin reaction product of Bisphenol A and epichlorohydrin. It shows much better crystallization resistance compared for standard liquid resin. When it is cured with the appropriate hardener, it gives excellent mechanical, chemical and adhesion properties. It is used in high solid solvent-free coatings, adhesives, composites, civil engineering and construction. 收起 | |
| Bisphenol F Epoxy Resin (BPF) | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin (BPF) is an epoxy resin used in the paints and coatings industry. | |
| Bisphenol F Epoxy Resin SMF-170 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin SMF-170 is a general-purpose unmodified low viscosity diglycidyl ether of Bisphenol F. In addition to offering advantage in terms of processing due to viscosity, it provides better chemical resistance compared to Bisphenol-A based ...展开 Bisphenol F Epoxy Resin SMF-170 is a general-purpose unmodified low viscosity diglycidyl ether of Bisphenol F. In addition to offering advantage in terms of processing due to viscosity, it provides better chemical resistance compared to Bisphenol-A based liquid resins. It is used in adhesives for electronic applications, chemical resistance coatings, industrial floors and laminates. 收起 | |
| Bisphenol F Epoxy Resin SMF-175S | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin SMF-175S is an epoxy resin used for coatings, building and electrical insulating materials. | |
| Bisphenol F Epoxy Resin SMF-2001 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin SMF-2001 is an epoxy resin used for material, building and electrical insulating materials. | |
| Bisphenol F Epoxy Resin SMF-2004 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin SMF-2004 is an epoxy resin with a high softening point and good flexibility. It is used in powder coatings. | |
| Bisphenol F Epoxy Resin SMF-2005 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin SMF-2005 is an epoxy resin with a high softening point and good flexibility. It is used in powder coatings. | |
| Borchers® AF 0670 | OMG Borchers GmbH | 带憎水成分的改性聚硅氧烷的水性乳液。可用作研磨工艺的消泡剂，以及工业和装饰体系和粘胶的后添加稀释成分。另外，该产品具备涂装后脱气的性能。 | |
| Borchers® AF 0871 | OMG Borchers GmbH | Borchers® AF 0871是一种改性有机聚硅氧烷的20%乳液。它可有效阻止分散和碾磨工艺中气泡的形成，可破坏水性涂料中的稳定气泡。它可用水稀释，在大多数聚合物乳液中有效。Borchers® AF 0871是一种高效消泡剂，可阻止和降低气泡形成，尤其是分散阶段。它尤其适用于高填充的颜料体系和颜料浆体碾磨。其有效性并不依赖于固化机理。Borchers® AF 0871可增加生产过程和施工中的比重。施工后可形成均一的涂膜。它设计用于水性乳液和可用水稀释的体系。有效性在基于聚氨酯（包括丙烯酸酯改性）和丙烯...展开 Borchers® AF 0871是一种改性有机聚硅氧烷的20%乳液。它可有效阻止分散和碾磨工艺中气泡的形成，可破坏水性涂料中的稳定气泡。它可用水稀释，在大多数聚合物乳液中有效。Borchers® AF 0871是一种高效消泡剂，可阻止和降低气泡形成，尤其是分散阶段。它尤其适用于高填充的颜料体系和颜料浆体碾磨。其有效性并不依赖于固化机理。Borchers® AF 0871可增加生产过程和施工中的比重。施工后可形成均一的涂膜。它设计用于水性乳液和可用水稀释的体系。有效性在基于聚氨酯（包括丙烯酸酯改性）和丙烯酸酯（也是羟基聚丙烯酸酯）的化学固化体系中已被验证 收起 | |
| Borchers® AF 1171 | OMG Borchers GmbH | Borchers® AF 1171是一种不含溶剂的消泡剂，基于有机硅，含憎水颗粒，适用于水性、溶剂型和不含溶剂的体系。它尤其适用于水性装饰漆和水性一般工业涂料。Borchers® AF 1171易添加。它也可加入碾磨基质中，稀释基质中或作为后添加助剂。由于它独特的分子结构，Borchers® AF 1171可改善涂膜光泽、基材润湿、有色体系的着色力并防止微泡的形成。该产品在水中易乳化并易于添加。其效率与固化机理无关。Borchers® AF 1171的特征是具有良好的基料相容性，添加仅需很低的剪切力。当制...展开 Borchers® AF 1171是一种不含溶剂的消泡剂，基于有机硅，含憎水颗粒，适用于水性、溶剂型和不含溶剂的体系。它尤其适用于水性装饰漆和水性一般工业涂料。Borchers® AF 1171易添加。它也可加入碾磨基质中，稀释基质中或作为后添加助剂。由于它独特的分子结构，Borchers® AF 1171可改善涂膜光泽、基材润湿、有色体系的着色力并防止微泡的形成。该产品在水中易乳化并易于添加。其效率与固化机理无关。Borchers® AF 1171的特征是具有良好的基料相容性，添加仅需很低的剪切力。当制备颜料色浆时，有效抑制了高剪切力碾磨过程中泡沫的形成。在基于水溶性醇酸、聚氨酯、苯乙烯、直链和乙烯基丙烯酸酯和羟基聚丙烯酸酯的物理和化学干燥体系中，Borchers® AF 1171可快速释放涂膜表面的空气。除了水性体系，Borchers® AF 1171也可用于不含溶剂和溶剂型醇酸 收起 | |
| Borchers® AF 1270 | OMG Borchers GmbH | Borchers® AF 1270是一种以氟化有机改性的聚硅氧烷为活性组分的溶液，它是高效并相容性好的消泡剂和脱气助剂，具有良好的防缩孔特性。Borchers® AF 1270是一种高活性硅基泡沫控制剂，具有脱气的特性。它适用于透明和有色溶剂型体系 | |
| Borchers® AF T | OMG Borchers GmbH | 高效的无硅树脂消泡剂，用于乳液油漆、纸张涂料、乱丝、粘胶、织物辅助剂和混凝土添加剂。 | |
| Borchers® Deca Barium 12.5 | OMG Borchers GmbH | Borchers® Deca Barium 12.5 is a highly efficient secondary drier. Barium improves through drying and has good pigment wetting properties. Borchers® Deca driers are metal salts of neodecanoic acids. Barium is used as a wetting agent for pigments and extend...展开 Borchers® Deca Barium 12.5 is a highly efficient secondary drier. Barium improves through drying and has good pigment wetting properties. Borchers® Deca driers are metal salts of neodecanoic acids. Barium is used as a wetting agent for pigments and extenders in solvent based coatings systems. It improves gloss and prevents adsorption of the primary driers by pigments and extenders thereby increasing coating stability during prolonged storage. In combination with Borchi® OXY - Coat, Borchers® Deca Cobalt or Borchers® Deca Manganese, barium has a similar effect to that of lead and will promote through drying in many formulations. Borchers® Deca Barium 12.5 is used in solventborne systems based on alkyds and epoxy esters that crosslink by oxidation. 收起 | |
| Borchers® Deca Cobalt 10 | OMG Borchers GmbH | Borchers® Deca Cobalt 10 is an important metal drier. It results in rapid surface drying and, in combination with a secondary drier such as zirconium, barium or lead, uniform through-drying of the paint film. This product is used in all oxidative systems,...展开 Borchers® Deca Cobalt 10 is an important metal drier. It results in rapid surface drying and, in combination with a secondary drier such as zirconium, barium or lead, uniform through-drying of the paint film. This product is used in all oxidative systems, whether air-or forced-drying. It is used in architectural paints, industrial coatings, stains, varnishes, oil-based inks and artists' colors. Cobalt catalyses redox reactions and even small additions result in the dissociation of autoxidant hydroperoxides up to a change in valency from Co2+ to Co3+. Borchers® Deca Cobalt 10 thus results in rapid surface drying. A surplus of cobalt may result in defects such as wrinkling, poor through-drying and yellowing. 收起 | |
| Borchers® Deca Cobalt 12 | OMG Borchers GmbH | 12% COBALT TEN-CEM是一种很重要的金属催干剂。它可快速催干表面，结合辅助催干剂例如锆、钡或铅，均一彻底的催干涂膜表面。它用于溶剂型体系。钴催化氧化还原反应，甚至少量添加即可导致过氧化氢自氧化分解以至于 Co2+ 变成了 Co3+。 它可用于建筑漆、工业涂料、着色剂、清漆、油基油墨和艺术颜料。过剩的钴会导致缺陷例如起皱、涂膜内部催干性差和黄变 | |
| Borchers® Deca Cobalt 12 (xylene) | OMG Borchers GmbH | Borchers® Deca Cobalt 12 (xylene) is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. ...展开 Borchers® Deca Cobalt 12 (xylene) is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. Borchers® Deca Cobalt grades are used in unsaturated polyester systems for coatings and casting resins, as well as in synthetic resins for fiber reinforced tools. It can also be used as an accelerator in unsaturated polyester resins, resulting in a shorter gel time. 收起 | |
| Borchers® Deca Cobalt 6 HS | OMG Borchers GmbH | Borchers® Deca Cobalt 6 HS is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. Borch...展开 Borchers® Deca Cobalt 6 HS is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. Borchers® Deca Cobalt grades are used in unsaturated polyester systems for coatings and casting resins, as well as in synthetic resins for fiber reinforced tools. It can also be used as an accelerator in unsaturated polyester resins, resulting in a shorter gel time. 收起 | |
| Borchers® Deca Manganese 8 | OMG Borchers GmbH | Borchers® Deca Manganese 8 is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combin...展开 Borchers® Deca Manganese 8 is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primers because its inherent color may cause discoloration in clear or light colored coatings. High atmospheric humidity severely inhibits the drying effect of manganese based driers. This product is recommended for conventional architectural paints, wood coatings, printing inks and other industrial coatings based on resins that dry by oxidation. 收起 | |
| Borchers® Deca Manganese 8 HS | OMG Borchers GmbH | Borchers® Deca Manganese 8 HS is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in com...展开 Borchers® Deca Manganese 8 HS is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primers because its inherent color may cause discoloration in clear or light colored coatings. High atmospheric humidity severely inhibits the drying effect of manganese based driers. This product is recommended for conventional architectural paints, wood coatings, printing inks and other industrial coatings based on resins that dry by oxidation. 收起 | |
| Borchers® Deca Zirconium 15 | OMG Borchers GmbH | Borchers® Deca Zirconium 15 is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended for ...展开 Borchers® Deca Zirconium 15 is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended for use in solventborne systems. Zirconium is mainly used in combination with primary driers like e.g. Borchi® OXY - Coat, Borchers® Deca Cobalt or Borchers® Deca Manganese based driers. In comparison to other secondary driers, zirconium has better properties in terms of color, yellowing and stability. 收起 | |
| Borchers® Deca Zirconium 15 HS | OMG Borchers GmbH | Borchers® Deca Zirconium 15 HS is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended f...展开 Borchers® Deca Zirconium 15 HS is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended for use in VOC-reduced and High-Solid coatings. Zirconium is mainly used in combination with primary driers like e.g. Borchi® OXY - Coat, Borchers® Deca Cobalt or Borchers® Deca Manganese based driers. In comparison to other secondary driers, zirconium has better properties in terms of color, yellowing and stability. 收起 | |
| Borchers® Dry 0133 | OMG Borchers GmbH | 一种与有机催干剂配合使用的协同催干剂成分。适用于所有溶剂型涂料，以及基于醇酸树脂和环氧酯等的低VOC含量和高固含量油漆。用于透明或着色油漆。 | |
| Borchers® Dry 0246 | OMG Borchers GmbH | 一种与有机催干剂配合使用的协同催干剂成分。适用于所有溶剂型涂料，以及基于醇酸树脂和环氧酯等的低VOC含量和高固含量油漆。用于透明或着色油漆。 | |
| Borchers® Dry 0347 Aqua | OMG Borchers GmbH | 用于所有水性涂料体系的新型的联合催干剂，基于结合了有机干燥促进剂的高活性协同催干剂成分。 | |
| Borchers® Dry 0410 | OMG Borchers GmbH | 不含钴的主催干剂，对传统的氧气催干涂料有非常高的催干性。 | |
| Borchers® Dry 0411 HS | OMG Borchers GmbH | 不含钴的主催干剂， 对氧气催干涂料和VOC含量降低的印刷油墨有非常高的催干性。 | |
| Borchers® Dry 0614 Aqua | OMG Borchers GmbH | 不含钴的主催干剂，对水性氧化干燥涂料具有特别高的催干性。 | |
| Borchers® Dry 0615 Aqua | OMG Borchers GmbH | 不含钴的主催干剂，对低VOC的水性氧化干燥涂料具有特别高的催干性。 | |
| Borchers® LH 10 | OMG Borchers GmbH | 用作PU体系等水性、化学交联、双组分涂料的促进剂。 | |
| Borchers® VP 0132 | OMG Borchers GmbH | 一种新型的有机改性钒化合物主催干剂。适用于溶剂型氧气干燥的透明和着色涂料。可以代替目前的主催干剂，特别是钴催干剂。 | |
| Borchers® VP 9950 | OMG Borchers GmbH | 在水性氧化干燥涂料中作为主催干剂的产品。可作为其它主催干剂的替代品，特别是含钴催干剂的替代品。 | |
| Borchi® Coll 10 | OMG Borchers GmbH | 含硅粒子的胶体分散体，不同型号的产品中粒子大小有多种规格。是一种水性、低粘度、无沉淀的分散体。 | |
| Borchi® Coll 20 | OMG Borchers GmbH | 含硅粒子的胶体分散体，不同型号的产品中粒子大小有多种规格。是一种水性、低粘度、无沉淀的分散体。 | |
| Borchi® Coll 20 M | OMG Borchers GmbH | 含硅粒子的胶体分散体，不同型号的产品中粒子大小有多种规格。是一种水性、低粘度、无沉淀的分散体。 |
