| 1257 Superfast Yellow 10G | Shanghai Honor Industrial Co., LTD | 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying p...展开 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying paints, latex paints, textile paste and printing inks. 收起 | |
| 1260 SuperFast Yellow RNG | Shanghai Honor Industrial Co., LTD | 1260 SuperFast Yellow RNG是一种有出色分散性的黄绿色粉末。它推荐用于道路标线涂料和工业涂料。 | |
| AEPD® VOX 1000 | ANGUS Chemical Company 安格斯化学公司 | 一个新的多官能团添加剂，用于低气味，零VOC户内水性油漆。它具有非常温和的气味，高沸点和低蒸汽压。这些特点使之成为需要符合EU directive 2004/42/EC法规的油漆生产商一个理想的配方工具 | |
| ALKATERGE®-T | ANGUS Chemical Company 安格斯化学公司 | ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...展开 ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. 收起 | |
| AMP® | ANGUS Chemical Company 安格斯化学公司 | 这是一种无色，低粘度流体，大量用于金属加工流体，涂料，锅炉水体系和个人护理等领域。它可用作中和树脂的胺，协同分散剂，脱甲醛剂，腐蚀抑制剂以及作为合成的原料。 | |
| AMP-95® | ANGUS Chemical Company 安格斯化学公司 | 被普遍认为是一种用于所有类型的乳胶漆的多功能添加剂。 | |
| AVANTANE® PA 4000 | ANGUS Chemical Company 安格斯化学公司 | 一种专门设计用于满足溶剂型轮转凹印和柔印印刷性能要求的添加剂。 | |
| DMAMP-80® | ANGUS Chemical Company 安格斯化学公司 | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...展开 DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. 收起 | |
| ECOPOL LB-64 | Ecopol Tech | ECOPOL LB-64 is a monocomponent hybrid organic-inorganic fluorinated polyurethane dispersed in butyl acetate solvent, which undergoes cross-linking in the presence of moisture and drying. This product stands out for its resistance to abrasion, ink repelle...展开 ECOPOL LB-64 is a monocomponent hybrid organic-inorganic fluorinated polyurethane dispersed in butyl acetate solvent, which undergoes cross-linking in the presence of moisture and drying. This product stands out for its resistance to abrasion, ink repellence, cigarette burns, and stains like coffee, while also exhibiting resistance to steam, high temperatures, and stability against UV radiation. It serves as an excellent hydrophobic and oleophobic coating and it has a high adhesion to inorganic surfaces. ECOPOL LB-64 is particularly recommended as a final coating for materials highly exposed to corrosion or erosion, such as aluminum (and other metals), high-pressure laminates (HPL), wood, and glass, among others. 收起 | |
| ECOPOLBUILD 1 | Ecopol Tech | ECOPOLBUILD 1 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits wate...展开 ECOPOLBUILD 1 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits water repellent properties, thus providing good moisture resistance. It also imparts high abrasion and alkali resistance. This product contains approximately 85% biobased products. 收起 | |
| ECOPOLBUILD 16 | Ecopol Tech | ECOPOLBUILD 16 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polycarbonate-polyurethane, specially designed for protective coatings in the construction and wood industry with excellent hydrolysis and solvent stability. Once app...展开 ECOPOLBUILD 16 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polycarbonate-polyurethane, specially designed for protective coatings in the construction and wood industry with excellent hydrolysis and solvent stability. Once applied and cured, the product exhibits water-repellent properties, providing good moisture resistance. Additionally, it imparts excellent abrasion and alkali resistance. This product contains more than 70% biobased products. 收起 | |
| ECOPOLBUILD 3 | Ecopol Tech | ECOPOLBUILD 3 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits wate...展开 ECOPOLBUILD 3 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits water repellent properties, thus providing good moisture resistance. It also imparts high abrasion resistance. This product contains approximately 85% biobased products. 收起 | |
| ECOPOLCOAT CCR 052-F | Ecopol Tech | ECOPOLCOAT CCR 052-F is an aqueous cationic dispersion of cross-linked organic-inorganic hybrid polyurethane, designed for textile coating with high hydrolytic stability. Once cured, it exhibits water-repellent properties and good moisture resistance, wit...展开 ECOPOLCOAT CCR 052-F is an aqueous cationic dispersion of cross-linked organic-inorganic hybrid polyurethane, designed for textile coating with high hydrolytic stability. Once cured, it exhibits water-repellent properties and good moisture resistance, with approximately 85% biobased content. Tailored for stamping processes, it demonstrates thermal resistance, hardness, low friction and durability. This versatile polymer also provides antiadhesive properties, preventing unwanted material adhesion during stamping. 收起 | |
| ECOPOLCOAT CCR 30-F | Ecopol Tech | ECOPOLCOAT CCR 30-F is an aqueous anionic dispersion of cross-linked organic-inorganic hybrid polyurethane, designed for textile coating with high hydrolytic stability. Once cured, it exhibits water-repellent properties and good moisture resistance, with ...展开 ECOPOLCOAT CCR 30-F is an aqueous anionic dispersion of cross-linked organic-inorganic hybrid polyurethane, designed for textile coating with high hydrolytic stability. Once cured, it exhibits water-repellent properties and good moisture resistance, with approximately 85% biobased content. Tailored for stamping processes, it demonstrates thermal resistance, hardness, low friction, and durability. This versatile polymer also provides antiadhesive properties, preventing unwanted material adhesion during stamping. 收起 | |
| ECOPOLCOAT CSS 052 | Ecopol Tech | ECOPOLCOAT CSS 052 is a unique product in the field of textile coatings as it represents a cationic aqueous organic-inorganic hybrid polyurethane dispersion developed to serve as a top coating. It exhibits superb superhydrophobic characteristics, impartin...展开 ECOPOLCOAT CSS 052 is a unique product in the field of textile coatings as it represents a cationic aqueous organic-inorganic hybrid polyurethane dispersion developed to serve as a top coating. It exhibits superb superhydrophobic characteristics, imparting high water repellency to coated materials. ECOPOLCOAT CSS 052 is environmentally friendly as it is water-based, fluorine-free, and made from 84% natural resources. The dispersion imparts a silky feel to textiles. It is suitable for all types of fabrics, enhancing their performance by improving abrasion resistance. In essence, ECOPOLCOAT CSS 052 emerges as a versatile, high-performance coating solution, combining functionality, aesthetics and ecological principles. 收起 | |
| ECOPOLCOAT FF 052 | Ecopol Tech | ECOPOLCOAT FF 052 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane. Once cured, it has a high resistance to abrasion, water, oil, and dirt. It also shows good resistance to weathering (rain, sun, dirt, particles, etc....展开 ECOPOLCOAT FF 052 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane. Once cured, it has a high resistance to abrasion, water, oil, and dirt. It also shows good resistance to weathering (rain, sun, dirt, particles, etc.). It contains CF2 chains in the polyurethane backbone. This CF2 is biodegradable. 收起 | |
| ECOPOLCOAT FF 30 | Ecopol Tech | ECOPOLCOAT FF 052 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane. Once cured, it has a high resistance to abrasion, water, alkali, oil, and dirt. It also shows good resistance to weathering (rain, sun, dirt, particl...展开 ECOPOLCOAT FF 052 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane. Once cured, it has a high resistance to abrasion, water, alkali, oil, and dirt. It also shows good resistance to weathering (rain, sun, dirt, particles, etc.). It contains CF2 chains in the polyurethane backbone. This CF2 is biodegradable. 收起 | |
| ECOPOLCOAT PC 30 | Ecopol Tech | ECOPOLCOAT PC 30 is an anionic aqueous dispersion of bio-based polycarbonate-polyurethane with a solid content of 35%. This coating has a combination of outstanding properties including water resistance, excellent abrasion resistance, and hydrolysis resis...展开 ECOPOLCOAT PC 30 is an anionic aqueous dispersion of bio-based polycarbonate-polyurethane with a solid content of 35%. This coating has a combination of outstanding properties including water resistance, excellent abrasion resistance, and hydrolysis resistance. Designed for applications in the manufacture of technical and functional textiles, such as sportswear, tents, rainwear, and other products where increased durability and performance are demanded. 收起 | |
| ECOPOLEDER-BASE | Ecopol Tech | ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40%. Specifically designed for impregnation applications it provides adhesive strength, which creates a robust and durable bond to the leather substrate. ECOP...展开 ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40%. Specifically designed for impregnation applications it provides adhesive strength, which creates a robust and durable bond to the leather substrate. ECOPOLEDER-BASE imparts an excellent elasticity to the material, significantly improving its flexibility. This translates into a superior handling experience, making it the ideal choice for applications that demand both strength and ease of handling. ECOPOLEDER-BASE represents a solution, which incorporates a synthesis of advanced polyurethane-polyester technology to offer increased performance and versatility in leather impregnation processes. 收起 | |
| ECOPOLEDER-BT | Ecopol Tech | ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and ...展开 ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and finishing applications, this dispersion significantly increases the abrasion resistance, conferring durability to the material. It has a high hardness, providing solid protection against wear. ECOPOLEDER-BT has specific binding properties with leather, ensuring strong and durable adhesion. In addition, the dispersion offers alkali resistance, extending its suitability for various conditions. With inherent waterproof properties, it further enhances the durability and utility of leather in various environments. In addition, ECOPOLEDER-BT is environmentally friendly, as more than 40% of its dry composition comes from organic sources. 收起 | |
| ECOPOLEDER-D-BASE | Ecopol Tech | ECOPOLEDER-D-BASE is an anionic aqueous polyurethane-polyester dispersion, which stands out for its significant solids content of 50%. Designed with a focus on durability and performance, this dispersion features high hydrolysis resistance, ensuring longe...展开 ECOPOLEDER-D-BASE is an anionic aqueous polyurethane-polyester dispersion, which stands out for its significant solids content of 50%. Designed with a focus on durability and performance, this dispersion features high hydrolysis resistance, ensuring longevity in applications. Adapted to leather impregnation processes, ECOPOLEDER-D-BASE offers exceptional elasticity, contributing to the flexibility and strength of the material. In particular, ECOPOLEDER-D-BASE exhibits exceptional adhesive strength, creating solid bonds with the leather substrate. This dispersion features advanced polymer technology, offering a high solids solution that elevates leather properties in durability, flexibility and handling. 收起 | |
| ECOPOLEDER-PC-TOP | Ecopol Tech | ECOPOLEDER-PC-TOP is an anionic aqueous polycarbonate-polyurethane dispersion of bio-based origin with a solids content of 35%. This coating serves to enhance the strength and durability of leather, providing an additional layer that acts as a protective ...展开 ECOPOLEDER-PC-TOP is an anionic aqueous polycarbonate-polyurethane dispersion of bio-based origin with a solids content of 35%. This coating serves to enhance the strength and durability of leather, providing an additional layer that acts as a protective barrier against scratches, stains and general wear and tear. Its application finds diverse uses, most notably in the manufacture of handbags, belts, footwear and other leather products. 收起 | |
| ECOPOLEDER-S-BASE | Ecopol Tech | ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40% adding groups with specific adhesion to leather. It is designed for impregnation applications, providing increased adhesive strength that creates a strong...展开 ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40% adding groups with specific adhesion to leather. It is designed for impregnation applications, providing increased adhesive strength that creates a strong, robust, and more durable bond to the leather substrate. ECOPOLEDER-BASE imparts good elasticity to the material, significantly improving its flexibility. This translates into a superior handling experience, making it the ideal choice for applications that demand strength and ease of handling. ECOPOLEDER-BASE represents a solution that incorporates a synthesis of advanced polyurethane-polyester technology to offer increased performance and versatility in leather impregnation processes. 收起 | |
| ECOPOLEDER-S-TOP | Ecopol Tech | ECOPOLEDER-S-TOP is a cationic aqueous polyurethane-silicone copolymer dispersion with a solids content of 30%. Its crosslinking mechanism is initiated during the drying process, which significantly increases its performance attributes. Designed primarily...展开 ECOPOLEDER-S-TOP is a cationic aqueous polyurethane-silicone copolymer dispersion with a solids content of 30%. Its crosslinking mechanism is initiated during the drying process, which significantly increases its performance attributes. Designed primarily for leather finishing applications, this dispersion substantially increases abrasion resistance, contributing to improved material durability. The high hardness of the formulation ensures solid wear protection, complemented by specific binding properties that establish a strong and durable adhesion to the leather. ECOPOLEDER-S-TOP goes beyond conventional functionalities by introducing a silky feel to the leather surface. In addition, it exhibits superhydrophobic properties, reinforcing the leather's resistance in various environmental conditions. In addition, more than 40% of its dry composition comes from bio-based materials. ECOPOLEDER-S-TOP is a sophisticated solution that combines the advantages of polyurethane polymers with silicone in the backbone to improve the performance and feel of leather products. 收起 | |
| ECOPOLEDER-TOP | Ecopol Tech | ECOPOLEDER-TOP constitutes an aqueous cationic polyurethane dispersion characterized by a 30% solids content. Significantly, its cross-linking mechanism is activated during the drying phase, culminating in an enhancement of its inherent properties. Tailor...展开 ECOPOLEDER-TOP constitutes an aqueous cationic polyurethane dispersion characterized by a 30% solids content. Significantly, its cross-linking mechanism is activated during the drying phase, culminating in an enhancement of its inherent properties. Tailored for leather finishing applications, this dispersion markedly augments abrasion resistance, thereby conferring a notable degree of durability to the material. The elevated hardness of ECOPOLEDER-TOP ensures robust protection against wear and tear, complemented by specific binding properties that guarantee a resilient and enduring adhesion to the leather substrate. With intrinsic waterproof attributes, it further fortifies the leather's durability and adaptability across diverse environmental conditions. In addition to its functional attributes, ECOPOLEDER-TOP aligns seamlessly with environmental considerations, as more than 40% of its dry composition is derived from organic sources. This renders it a judicious and sustainable choice, harmonizing ecological consciousness with unwavering performance standards. 收起 | |
| ECOPOLEDER-TRANS | Ecopol Tech | ECOPOLEDER-TRANS is an anionic aqueous polyurethane-polyester dispersion, which is distinguished by an impressive 60% solids content with a low viscosity. This dispersion is designed to provide a protective coating and improve various leather properties. ...展开 ECOPOLEDER-TRANS is an anionic aqueous polyurethane-polyester dispersion, which is distinguished by an impressive 60% solids content with a low viscosity. This dispersion is designed to provide a protective coating and improve various leather properties. The high solids content of ECOPOLEDER-TRANS allows for a reduced application rate in transfer processes, optimising coating efficiency. ECOPOLEDER-TRANS provides increased wear resistance, flexibility and durability. 收起 | |
| ECOPOLFIX | Ecopol Tech | ECOPOLFIX is an aqueous anionic dispersion of an acrylic copolymer. It is suitable for application on roads, unpaved paths, parking lots and others. Fixer and stabilizer for ground applications. Main characteristics include good fixation of soil and good ...展开 ECOPOLFIX is an aqueous anionic dispersion of an acrylic copolymer. It is suitable for application on roads, unpaved paths, parking lots and others. Fixer and stabilizer for ground applications. Main characteristics include good fixation of soil and good elasticity, low water absorption and steam proof, dust repellent, abrasion resistant and soil stabilizer. 收起 | |
| ECOPOLSEC | Ecopol Tech | ECOPOLSEC is a white powder of amorphous precipitated silica with a homogeneous particle size and high absorption capacity. It stands out for its absorption capacity without gel formation. It is specifically used in the sludge drying process. | |
| ECOPOLTEXT-40 V | Ecopol Tech | ECOPOLTEXT-40是阴离子脂肪族聚酯 - 聚氨酯分散体，专门设计用于纺织品涂料配方。 | |
| ECOPOLTEXT-60 | Ecopol Tech | ECOPOLTEXT-60 is an anionic aliphatic polyester-polyurethane dispersion with a high solids content, specially designed for use in base coat textile coating formulations. It is suitable for various textile coating processes in the fields of sports, apparel...展开 ECOPOLTEXT-60 is an anionic aliphatic polyester-polyurethane dispersion with a high solids content, specially designed for use in base coat textile coating formulations. It is suitable for various textile coating processes in the fields of sports, apparel, fashion, technical textiles, and outerwear as it improves the mechanical properties of the fabric, making it stronger and more durable. This high solids product has advantages such as increased resistance to wear, abrasion, and weathering. 收起 | |
| ECOPOLTEXT-D | Ecopol Tech | ECOPOLTEXT-D is an anionic high-molecular weight water-based polyurethane dispersion with high elasticity, high elongation at break, and very good hydrolysis resistance. The dispersion is very stable due to its low particle size distribution with a high c...展开 ECOPOLTEXT-D is an anionic high-molecular weight water-based polyurethane dispersion with high elasticity, high elongation at break, and very good hydrolysis resistance. The dispersion is very stable due to its low particle size distribution with a high concentration of polymer, and very low viscosity. This gives a very good performance for digital printing. The product is free of NMP, NEP, and VOCs and organo-TIN free. Due to its unique polymeric structure, ECOPOLTEXT-D is particularly suitable for applications involving different substrates. As with any product, ECOPOLTEXT-D should be tested or formulated for a specific use before an extensive application. Resin dispersions, emulsifiers, and thickening agents, among others, can be added. 收起 | |
| ECOPOLTEXT-S40 V | Ecopol Tech | ECOPOLTEXT-S40 V is an anionic aliphatic polyester-polyurethane dispersion with specific cross-linking in textile drying processes. This product is suitable in areas such as sports, technical articles, and general protective equipment, as it has fabric-re...展开 ECOPOLTEXT-S40 V is an anionic aliphatic polyester-polyurethane dispersion with specific cross-linking in textile drying processes. This product is suitable in areas such as sports, technical articles, and general protective equipment, as it has fabric-reactive groups that provide better adhesion. 收起 | |
| ECOPUD EW-10 | Ecopol Tech | ECOPUD EW-10 is an anionic polyurethane in aqueous dispersion. It can be directly applied to porous materials (wood, paper) using various techniques (brush, roller, spray) without prior drying, with absorption tests recommended. It can also be applied to ...展开 ECOPUD EW-10 is an anionic polyurethane in aqueous dispersion. It can be directly applied to porous materials (wood, paper) using various techniques (brush, roller, spray) without prior drying, with absorption tests recommended. It can also be applied to previously dry surfaces. ECOPUD EW-10 is used in industries such as wood, graphic arts, lamination, footwear, textiles, paper, automotive, and construction. 收起 | |
| ECOPUD-42-45 | Ecopol Tech | ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formula...展开 ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formulation of adhesives for furniture, automotive, footwear, textiles, leather, cork, and the construction industry. ECOPUD 42-45 is particularly well-suited for wet bonding of textile substrates due to the softness of the polymer film and its resistance to high temperatures. The product is free of NMP, NEP, and VOC’s and organo-TIN free. 收起 | |
| ECOPUD-54 | Ecopol Tech | ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction ...展开 ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction industry. Due to its polymeric structure, ECOPUD-54 is particularly well-suited for applications involving plasticized PVC substrates. 收起 | |
| FLEXITANE® CA 6000 | ANGUS Chemical Company 安格斯化学公司 | 一种经过改进的万能专业涂料助剂，是一种有效的溶液，能够满足涂料配方的要求，减少特殊助剂的用量。 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| NIKANE® MS 3000 | ANGUS Chemical Company 安格斯化学公司 | 一种性能独特的多功能溶剂，用于构成多种工业保养涂料体系中的溶剂型还原剂和冲淡剂。 | |
| NIKANE® MS 5000 | ANGUS Chemical Company 安格斯化学公司 | 一种多功能溶剂，在溶剂型体系中有独特的性能。不但能够轻易地溶解各种材料，而且能够赋予溶解液以特性，因此得到了广泛的应用。 | |
| PIGMENT BLUE 15:6(C.I.NO.:PB15:6,PIGMENT BLUE 15:6) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PB15:6,PIGMENT BLUE 15:6 is the modification of copper phthalocyanine. It affords the reddest blue shade provided by any copper phthalocyanine blue pigment. In recent years it has become possible to sufficiently stabilize these pigments towards ch...展开 C.I.NO.:PB15:6,PIGMENT BLUE 15:6 is the modification of copper phthalocyanine. It affords the reddest blue shade provided by any copper phthalocyanine blue pigment. In recent years it has become possible to sufficiently stabilize these pigments towards change of modification in order to largely eliminate undesirable coloristic effects in application. In terms of fastness properties, C.I.NO.:PB15:6,PIGMENT BLUE 15:6 performs like other modifications. In baking enamels, stabilized types are completely fast to overcoating, but they are not entirely fast to bleeding in plasticized PVC. 收起 | |
| PIGMENT BLUE 60(C.I.NO.:PB60,PIGMENT BLUE 60) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PB60,PIGMENT BLUE 60 is an Indanthrone pigment which demonstrates excellent weatherfastness. Most grades of this pigment, like other commercial vat type pigments, provide good transparency. They are primarily applied in automotive finishes, especi...展开 C.I.NO.:PB60,PIGMENT BLUE 60 is an Indanthrone pigment which demonstrates excellent weatherfastness. Most grades of this pigment, like other commercial vat type pigments, provide good transparency. They are primarily applied in automotive finishes, especially in metallic finishes. It is highly durable even in light white reductions, and shows very good fastness to organic solvents, including alcohols, esters, and ketones, aromatic and aliphatic hydrocarbons, and various types of plasticizers. This product may also be employed in plastics, rubber, and elastomers. 收起 | |
| PIGMENT BULE 15:2(C.I.NO.;PB15:2,PIGMENT BLUE 15:2) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PB15:2,PIGMENT BLUE 15:2 encompasses a number of Copper Phthalocyanine types which are stabilized towards flocculation and change of modification. Their main area of application is in paints. In accordance with its good fastness to flocculation, C...展开 C.I.NO.:PB15:2,PIGMENT BLUE 15:2 encompasses a number of Copper Phthalocyanine types which are stabilized towards flocculation and change of modification. Their main area of application is in paints. In accordance with its good fastness to flocculation, C.I.NO.:PB15:2,PIGMENT BLUE 15:2 demonstrates good resistance to rub-out in most common binder systems. Other fastness properties in application largely equal those of P.B.15:1. In printing inks, C.I.NO.:PB15:2,PIGMENT BLUE 15:2 is employed mostly in special gravure and flexographic inks. 收起 | |
| PIGMENT BULE 15:4(C.I.NO.;PB15:4,PIGMENT BLUE 15:4) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PB15:4,PIGMENT BLUE 15:4 is a Copper Phthalocyanine Blue pigment designated in the the Colour Index. It is stabilized towards flocculation, and shows largely the same coloristic and fastness properties as C.I.NO.:PB15:3,PIGMENT BLUE 15:3 types, bu...展开 C.I.NO.:PB15:4,PIGMENT BLUE 15:4 is a Copper Phthalocyanine Blue pigment designated in the the Colour Index. It is stabilized towards flocculation, and shows largely the same coloristic and fastness properties as C.I.NO.:PB15:3,PIGMENT BLUE 15:3 types, but often exhibits much better rheology. As with stabilized Copper Phthalocyanine Blue types, stabilization through surface treatment has proven to decrease the solvent fastness of Copper Phthalocyanine Blue, sometimes considerably so, making the pigment more sensitive to aromatics, alcohols, ethylene glycol, and ketones. This product is an attractive choice for oven drying paints, and is also recommended for gravure printing inks. 收起 | |
| PIGMENT GREEN 7 | Shanghai Honor Industrial Co., LTD | PIGMENT GREEN 7, C.I.NO.PG7是一种有蓝色阴影的酞菁绿颜料。它主要用于工业涂料，建筑涂料和粉末涂料，打印油墨和塑料中。这款产品具有出色的色牢度和良好的热稳定性。 | |
| PIGMENT ORANGE 13 | Shanghai Honor Industrial Co., LTD | PIGMENT ORANGE 13 含有C.I.NO. PO13。它与C.I.NO.:PO34，PIGMENT ORANGE 34有十分相似的颜色性，但一般更加偏黄一些。C.I.NO.:PO13, PIGMENT ORANGE 13的应用产品中聚烯烃含量很有限。此颜料是很快的清洁剂。它也被用于粘性旋转染色以及原浆染色。在图像行业，从另一方面说，使用C.I.NO.:PO13, PIGMENT ORANGE 13到一定程度用于包装印刷油墨。其耐光度比较均衡但是对一些有机溶剂色素的稳定性是极好的或近乎完美的。同...展开 PIGMENT ORANGE 13 含有C.I.NO. PO13。它与C.I.NO.:PO34，PIGMENT ORANGE 34有十分相似的颜色性，但一般更加偏黄一些。C.I.NO.:PO13, PIGMENT ORANGE 13的应用产品中聚烯烃含量很有限。此颜料是很快的清洁剂。它也被用于粘性旋转染色以及原浆染色。在图像行业，从另一方面说，使用C.I.NO.:PO13, PIGMENT ORANGE 13到一定程度用于包装印刷油墨。其耐光度比较均衡但是对一些有机溶剂色素的稳定性是极好的或近乎完美的。同样，此油墨在石蜡，植物酯和脂肪酸盐应用迅速。它们热稳定性强，能高达200°C。C.I.NO.:PO13, PIGMENT ORANGE 13也被用于金属装饰涂装，提供适合的耐光性。同样，它对清洁的漆层有抵抗性，杀菌能力也是很好的。 收起 | |
| PIGMENT ORANGE 16 | Shanghai Honor Industrial Co., LTD | PIGMENT ORANGE 16也被称为Dianisidine Orange。它呈黄橙色，比P.O.13和34红。PIGMENT ORANGE 16应用的主要领域在打印油墨行业。这种颜料专门用于调整P.Y.12型苯胺黄色颜料的色调。为了提供更好的透明度还生产了树脂处理类型。PIGMENT ORANGE 16不耐光也并不耐用，不适合用于涂料。但是由于它成本较低，使其适用于橡胶和纺织印刷的着色剂。 | |
| PIGMENT ORANGE 34(C.I.NO.:PO34,PIGMENT ORANGE 34) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PO34,PIGMENT ORANGE 34 is supplied in a variety of types, which differ considerably in their particle size distributions. Specific surface areas range from 15 m2/g in highly opaque versions to about 75 m2/g in transparent types. Transparent C.I.NO...展开 C.I.NO.:PO34,PIGMENT ORANGE 34 is supplied in a variety of types, which differ considerably in their particle size distributions. Specific surface areas range from 15 m2/g in highly opaque versions to about 75 m2/g in transparent types. Transparent C.I.NO.:PO34,PIGMENT ORANGE 34 versions represent the most frequent choice for printing inks as they provide a clean, yellowish orange hue and high tinctorial strength. This product is also used in textiles and plastics to a certain extent. 收起 | |
| PIGMENT ORANGE 36, C.I.NO.: PO36 | Shanghai Honor Industrial Co., LTD | PIGMENT ORANGE 36, C.I.NO.: PO36, red shade orange, HP Orange 3633,an Benzimidazolone Pigments, with excellent light fastness, weather fastness, solvent fastness, and opaque organic pigments, used for industrial and automotive coatings, packaging inks, me...展开 PIGMENT ORANGE 36, C.I.NO.: PO36, red shade orange, HP Orange 3633,an Benzimidazolone Pigments, with excellent light fastness, weather fastness, solvent fastness, and opaque organic pigments, used for industrial and automotive coatings, packaging inks, metal inks. 收起 | |
| PIGMENT ORANGE 38 (C.I.NO.:PO38, PIGMENT ORANGE 38) | Shanghai Honor Industrial Co., LTD | PIGMENT ORANGE 38是一种黄色调红色，主要用于打印油墨和塑料中。它显示出良好的牢度，适用于胶印油墨以及金属装饰印刷。塑料行业主要使用P.O.38为PVC，聚烯烃和聚苯乙烯着色。在涂料行业中，这种颜料有出色的耐溶剂性，可以在高档工业涂料等对于光牢度和耐用性要求不太苛刻的应用中使用。 | |
| PIGMENT ORANGE 71, C.I.NO.71, DPP Orange - HP ORANGE 3349 | Shanghai Honor Industrial Co., LTD | PIGMENT ORANGE 71,C.I.NO.71, DPP orange pigments is a medium orange pigment. It is mainly used for plastic color concentrate, in HDPE, PP AND PVC resins. This product has perfect migration-resistance properties, and heat resistance up to 300 degrees. It i...展开 PIGMENT ORANGE 71,C.I.NO.71, DPP orange pigments is a medium orange pigment. It is mainly used for plastic color concentrate, in HDPE, PP AND PVC resins. This product has perfect migration-resistance properties, and heat resistance up to 300 degrees. It is also used in printing inks with perfect solvent fastness and light-fastness and weather fastness. 收起 | |
| PIGMENT ORANGE 73, C.I.NO.73-HP ORANGE 3642 | Shanghai Honor Industrial Co., LTD | PIGMENT ORANGE 73,C.I.NO.73, DPP orange, Orange 3642 is recommended for high grade industrial paints, like OEM, Solvent stove paints, powder coatings and Coil coatings. | |
| PIGMENT RED 112 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 112 是一种十分好的中度红色颜料，混合了C.I. No. PR112。它的主要应用市场包括油墨印刷，抛光剂及涂料；但它也被用于其他一些领域。印刷油墨领域使用此产品主要在凸版印刷和平板印刷，凹版包装印刷油墨，柔性油墨。它的着色力很强。此颜料显现出了极好的耐光性。本产品极易溶于脂肪酸盐中，虽然它完全不能溶于石蜡，只是仅仅微溶于黄油及其它油脂类（步骤3）。它们也被干净漆涂层影响和具有杀菌作用。 在油漆中，PIGMENT RED 112 产生了类似红色的颜色。它或许能被使用到，但绝...展开 PIGMENT RED 112 是一种十分好的中度红色颜料，混合了C.I. No. PR112。它的主要应用市场包括油墨印刷，抛光剂及涂料；但它也被用于其他一些领域。印刷油墨领域使用此产品主要在凸版印刷和平板印刷，凹版包装印刷油墨，柔性油墨。它的着色力很强。此颜料显现出了极好的耐光性。本产品极易溶于脂肪酸盐中，虽然它完全不能溶于石蜡，只是仅仅微溶于黄油及其它油脂类（步骤3）。它们也被干净漆涂层影响和具有杀菌作用。 在油漆中，PIGMENT RED 112 产生了类似红色的颜色。它或许能被使用到，但绝不仅限于空气干燥漆之中，而且在烘烤搪瓷中，提供了合适的条件以避免爆裂。烘烤温度介于140-160°C 之间，浓度阈值为0.1%；介于180-200°C，极限位2.5%。其耐涂性不尽人意。但耐光性和耐环境性十分优异，甚至减少了白色。优异的牢固性能使得该产品适用于高级涂料，比如汽车漆及其他普通工业涂料。电泳漆是一种特殊用途的涂料，在乳胶漆中也有其特殊的用途，尽管它在外观上的固定性相对较差。 收起 | |
| PIGMENT RED 12 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 12 是其中一种更为重要的波尔多有色材料，混合了C.I. No. PR12。印刷行业在平版印刷，凹版包装印刷和柔性水墨中广泛使用了PIGMENT RED 12。此颜料十分的耐晒而不褪色。它显示出很高的着色强度；对溶剂及其他的媒介的印刷牢度很适度。印刷品会受石蜡、黄油及其他的因素影响。PIGMENT RED 12 同样相似的对碱很敏感。 纺织品印刷使用PIGMENT RED 12 绝对的耐晒且不褪色。它能够承受最高达150°C的高温；甚至到了180°C，此颜料可保持其初始颜色值。涂...展开 PIGMENT RED 12 是其中一种更为重要的波尔多有色材料，混合了C.I. No. PR12。印刷行业在平版印刷，凹版包装印刷和柔性水墨中广泛使用了PIGMENT RED 12。此颜料十分的耐晒而不褪色。它显示出很高的着色强度；对溶剂及其他的媒介的印刷牢度很适度。印刷品会受石蜡、黄油及其他的因素影响。PIGMENT RED 12 同样相似的对碱很敏感。 纺织品印刷使用PIGMENT RED 12 绝对的耐晒且不褪色。它能够承受最高达150°C的高温；甚至到了180°C，此颜料可保持其初始颜色值。涂料行业主要将其用在干燥漆之中。它仅适用于高浓度配方。特别是在充分和相关的色调中。PIGMENT RED 12 具有相当令人满意的耐光性。此种颜料实际上偶尔也用于其牢度性能符合其规格的乳胶漆中。此产品也有一些特殊的运用， 比如说汽车清洁剂、地板抛光、鞋抛光等，并经常用于将办公用品和皮革染色。 收起 | |
| PIGMENT RED 122, C.I.NO.: PR122 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 122,C.I.NO.: PR122, HP Red 26120 is a Quinacridone pigments with color index number pigment red 122, C.I.NO.: PR122, this is belong to Quinacridone group, with excellent anti-migration and heat stability property, and blue shade red or Pink co...展开 PIGMENT RED 122,C.I.NO.: PR122, HP Red 26120 is a Quinacridone pigments with color index number pigment red 122, C.I.NO.: PR122, this is belong to Quinacridone group, with excellent anti-migration and heat stability property, and blue shade red or Pink color. Is mainly used for high quality coatings, inks and plastics. 收起 | |
| PIGMENT RED 146 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 146是一种具有很好耐溶性的蓝红色颜料。它主要用于印刷油墨、涂料和油漆。油墨行业使用C.I.NO.:PR146, PIGMENT RED 146来作为凸版印刷和胶印的油墨，同时也作为包装凹印和柔印印刷的油墨。此颜料可抗石油溶剂、邻苯二甲酸二丁酯、黄油、肥皂脂肪酸盐、碱、酸。此外，它们也十分稳定以清理漆涂层。至于热稳定性，C.I.NO.:PR146, PIGMENT RED 14能保留其颜色至10分钟(200°C)，以及在180°C时30分钟。C.I.NO.:PR146, PIGME...展开 PIGMENT RED 146是一种具有很好耐溶性的蓝红色颜料。它主要用于印刷油墨、涂料和油漆。油墨行业使用C.I.NO.:PR146, PIGMENT RED 146来作为凸版印刷和胶印的油墨，同时也作为包装凹印和柔印印刷的油墨。此颜料可抗石油溶剂、邻苯二甲酸二丁酯、黄油、肥皂脂肪酸盐、碱、酸。此外，它们也十分稳定以清理漆涂层。至于热稳定性，C.I.NO.:PR146, PIGMENT RED 14能保留其颜色至10分钟(200°C)，以及在180°C时30分钟。C.I.NO.:PR146, PIGMENT RED 14在纺织品中还显现出了良好的耐光性。C.I.NO.:PR146, PIGMENT RED 14还可用于涂料，主要应用于乳液建筑涂料；它也适合应用在耐久性不是很重要的一般工业涂料行业。C.I.NO.:PR146, PIGMENT RED 14可用于与钼酸盐颜料产生明亮的不透明红色颜料组合。在聚合物中，C.I.NO.:PR146, PIGMENT RED 14只用于彩色硬质PVC。C.I.NO.:PR146, PIGMENT RED 14是各种特殊应用的合适选择。该列表中包括木材污渍。此产品具有快速覆盖和稳定性在硝基酸催化聚酯清漆。强烈的色彩处于蓝色色标第七等耐光性。它的其它应用领域包括办公用品和艺术类颜料，清洁剂、纸张的纺前原浆着色，洗衣标记等。 收起 | |
| PIGMENT RED 169(C.I.NO.:PR169,PIGMENT RED 169) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PR169,PIGMENT RED 169 is suited to letterpress and offset printing inks, where it provides the standard purple-red for three and four color printing in accordance with the DIN scale. Moreover, this product is frequently used for toluene based publ...展开 C.I.NO.:PR169,PIGMENT RED 169 is suited to letterpress and offset printing inks, where it provides the standard purple-red for three and four color printing in accordance with the DIN scale. Moreover, this product is frequently used for toluene based publication gravure printing inks, where it is sometimes applied in combination with C.I.NO.:PR53,PIGMENT RED 53. One of the major fields of application for C.I.NO.:PR169,PIGMENT RED 169 is in aqueous flexographic printing inks. 收起 | |
| PIGMENT RED 176 (C.I.NO.:PR176, PIGMENT RED 176) | Shanghai Honor Industrial Co., LTD | PIGMENT RED 176提供蓝红色调，比C.I.NO.:PR187，PIGMENT RED 187和208更蓝，比C.I.NO.:PR185和PIGMENT RED 185更黄。它主要用于塑料行业。该颜料在增塑PVC中显示出很好的迁移牢度。这款颜料还用于聚烯烃和聚苯乙烯，其耐光性同样良好。应用包括层压塑料板装饰打印等。PIGMENT RED 176的色调接近三和四色打印的标准洋红色。 | |
| PIGMENT RED 177(C.I.NO.:PR177,PIGMENT RED 177) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PR177,PIGMENT RED 177 is mainly applied in industrial paints, in spin dyeing, and in polyolefin and PVC coloration. Combined with inorganic pigments, ir exhibits high lightfastness and weatherfastness. Combinations with Molybdate Red are also used...展开 C.I.NO.:PR177,PIGMENT RED 177 is mainly applied in industrial paints, in spin dyeing, and in polyolefin and PVC coloration. Combined with inorganic pigments, ir exhibits high lightfastness and weatherfastness. Combinations with Molybdate Red are also used in automotive finishes, especially for automotive O.E.M. finishes and for automotive refinishes. The types are highly transparent, which makes them suitable colorants for transparent paints. At typical processing temperatures for oven drying systems, C.I.NO.:PR177,PIGMENT RED 177 is entirely fast to overcoating. This product is recommended for automotive finishes, plastics, transparent films, PUR and PVC, spin dyeing, and printing inks. 收起 | |
| PIGMENT RED 179(C.I.NO.:PR179,PIGMENT RED 179) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PR179,PIGMENT RED 179, a dimethyllperylimide compound, is probably the most significant member of its class. The pigment is primarily used in industrial coatings, especially for high grade original automotive (O.E.M) finishes and automotive refini...展开 C.I.NO.:PR179,PIGMENT RED 179, a dimethyllperylimide compound, is probably the most significant member of its class. The pigment is primarily used in industrial coatings, especially for high grade original automotive (O.E.M) finishes and automotive refinishes. It can provide clean shades of red, as well as maroon and Bordeaux shades. Transparent types are available for metallic finishes, sometimes also in combination with other organic or inorganic pigments. This product is used to a considerable extent in paints, and may also be used in plastics. 收起 | |
| PIGMENT RED 184 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 184 带来了C.I.NO.:PR146.中偏蓝色的红色色彩。这两种产品在应用之中也十分的类似。它的印刷品抗脂肪酸盐、黄油、石蜡、邻苯二甲酸二丁酯、石油溶剂，和甲苯。C.I.NO.:PR184, PIGMENT RED 184是特殊用于抗碱、酸、耐皂性环境中。优良的耐有机溶剂性使得C.I.NO.:PR184, PIGMENT RED 184成为凸版印刷和胶印应用的合适选择，以及包装凹印油墨、柔印油墨。其金属装饰印刷品能抵抗清漆涂层。. C.I.NO.:PR184, PIGMENT ...展开 PIGMENT RED 184 带来了C.I.NO.:PR146.中偏蓝色的红色色彩。这两种产品在应用之中也十分的类似。它的印刷品抗脂肪酸盐、黄油、石蜡、邻苯二甲酸二丁酯、石油溶剂，和甲苯。C.I.NO.:PR184, PIGMENT RED 184是特殊用于抗碱、酸、耐皂性环境中。优良的耐有机溶剂性使得C.I.NO.:PR184, PIGMENT RED 184成为凸版印刷和胶印应用的合适选择，以及包装凹印油墨、柔印油墨。其金属装饰印刷品能抵抗清漆涂层。. C.I.NO.:PR184, PIGMENT RED 184还用于橡胶之中。 收起 | |
| PIGMENT RED 185 (C.I.NO.:PR185, PIGMENT RED 185) | Shanghai Honor Industrial Co., LTD | PIGMENT RED 185提干净，偏蓝色调的红色。这款颜料完全或几乎完全不溶于普通溶剂中。其主要应用在图形打印和塑料的大量着色领域。打印油墨行业在所有印刷技术中使用C.I.NO.:PR185，PIGMENT RED 185。打印油墨显示出很好的溶剂牢度。C.I.NO.:PR185，PIGMENT RED 185在塑料行业广泛应用于为PVC、聚氯乙烯和聚烯烃上色。 | |
| PIGMENT RED 188 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 188 是一种偏黄的红色颜料，其具有很好的色牢性。其主要应用领域是在印刷油墨和油漆，此颜料适用于所有的印刷技术。1/1-1/25 SD凸版印刷论证此产品5-6等在蓝色色标上的耐光性等同于5等。颜料的着色强度表现的较差。然而，这些印刷品能很快抗御有机溶剂、脂肪、石蜡、脂肪酸盐、碱和酸。它们亦可以快速清除漆涂层，并可用于消毒。在DIN 16 524/1混合溶剂中色牢度稳定，然而，这还不够完美。说到它的热稳定性，, P.R.188颜料可容忍暴露在最高220°C的环境中10分钟，或是在18...展开 PIGMENT RED 188 是一种偏黄的红色颜料，其具有很好的色牢性。其主要应用领域是在印刷油墨和油漆，此颜料适用于所有的印刷技术。1/1-1/25 SD凸版印刷论证此产品5-6等在蓝色色标上的耐光性等同于5等。颜料的着色强度表现的较差。然而，这些印刷品能很快抗御有机溶剂、脂肪、石蜡、脂肪酸盐、碱和酸。它们亦可以快速清除漆涂层，并可用于消毒。在DIN 16 524/1混合溶剂中色牢度稳定，然而，这还不够完美。说到它的热稳定性，, P.R.188颜料可容忍暴露在最高220°C的环境中10分钟，或是在180°C 达到30分钟. 涂料工业使用C.I.NO.:PR188, PIGMENT RED 188在高档工业涂料的优秀稳定性。它的全色调等于蓝色色标上的第七等。TiO2降到1：5也能表现出相同点耐光性。颜料的耐候性同样等同于全色彩和其余相近的深色调。此颜料在烘烤温度低于160°C的情况下不渗透分散，它在涂料在可以保持其色彩在最高200°C当中。C.I.NO.:PR188, PIGMENT RED 188常常可在装饰性涂料中找到，此领域在美国的适用范围十分广泛。高度不透明的C.I.NO.:PR188, PIGMENT RED 188级已被推广在市场中。它比其他任何种类带来了灿烂的，至今更加偏黄的红色。 收起 | |
| PIGMENT RED 2 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 2 是一种中等红色类型颜料混合了C.I. No. PR2。它主要的实用范围是印刷油墨领域。此类型物质是一些粗糙的颗粒，经常被用来配制高度着色的油墨，具有良好的流动性，并能够够满足相应的应用要求的类型。此颜料同时也展现出了良好的光泽型。 PIGMENT RED 2 在一些特殊的印刷品之中并不是表现的很完美。它主要用于平版印刷和凹版包装印刷和柔印水墨。此颜料同时也适用于纺织印刷。本产品还可作为一种颜料连接黏胶纤维和黏胶纤维素染色纺织品以及作为木浆棉膜的纺前染色。 | |
| PIGMENT RED 202(C.I.NO.:PR202,PIGMENT RED 202) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PR202,PIGMENT RED 202, a very lightfast and weatherfast mixed phase quinacridone pigment, provides a dull bluish shade. It is primarily applied in automotive finishes. Even highly transparent types with fine particle sizes provide two-coat metalli...展开 C.I.NO.:PR202,PIGMENT RED 202, a very lightfast and weatherfast mixed phase quinacridone pigment, provides a dull bluish shade. It is primarily applied in automotive finishes. Even highly transparent types with fine particle sizes provide two-coat metallic finishes which offer excellent rheological properties. In terms of fastness to overcoating and other aspects of pigment performance and properties, C.I.NO.:PR202,PIGMENT RED 202 largely behaves like C.I.NO.:PR122,PIGMENT RED 122. 收起 | |
| PIGMENT RED 208(C.I.NO.:PR208,PIGMENT RED 208) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PR208,PIGMENT RED 208 affords medium shades of red. The pigment exhibits good fastness to chemicals and solvents. Its main area of application is in the mass coloration of plastics and in packaging gravure printing inks. This product can be also b...展开 C.I.NO.:PR208,PIGMENT RED 208 affords medium shades of red. The pigment exhibits good fastness to chemicals and solvents. Its main area of application is in the mass coloration of plastics and in packaging gravure printing inks. This product can be also be used in spin dyeing, general industrial finishes, and in a variety of specialty media. 收起 | |
| PIGMENT RED 213 (C.I.NO.:PR213, PIGMENT RED 213) | Shanghai Honor Industrial Co., LTD | PIGMENT RED 213是一种很少在日本以外遇到的产品。颜料呈现蓝色调红色，匹配三和四色打印的标准品红色时其蓝色太深。市售类型相对较不透明，但是与其它Naphthol AS颜料相比比较不耐光。 | |
| PIGMENT RED 22 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 22 是一种黄-红色颜料混合C.I. No. PR22.。它主要的市场在纺织品印刷，但它也被用于整个图像领域，比如说在平面印刷和凹版印刷，尤其是在硝化纤维为基础的油墨中。PIGMENT RED 22 在抗脂肪酸盐与碱性必须条件下使用十分有效。这款产品有着很高的着色强度，它在一定程度上又比C.I.NO.:PR9 淡一些，PIGMENT RED 9有着很高的区域浓度；在较低浓度的色素区是偏黄色。涂料工业在空气干燥系统中采用PIGMENT RED 22，在乳胶漆中，有时偶尔用于工业用漆。...展开 PIGMENT RED 22 是一种黄-红色颜料混合C.I. No. PR22.。它主要的市场在纺织品印刷，但它也被用于整个图像领域，比如说在平面印刷和凹版印刷，尤其是在硝化纤维为基础的油墨中。PIGMENT RED 22 在抗脂肪酸盐与碱性必须条件下使用十分有效。这款产品有着很高的着色强度，它在一定程度上又比C.I.NO.:PR9 淡一些，PIGMENT RED 9有着很高的区域浓度；在较低浓度的色素区是偏黄色。涂料工业在空气干燥系统中采用PIGMENT RED 22，在乳胶漆中，有时偶尔用于工业用漆。其应用领域包括paper mass和表面着色，颜色铅笔，艺术上色及其他用途。 收起 | |
| PIGMENT RED 242(C.I.NO.:PR242,PIGMENT RED 242) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PR242,PIGMENT RED 242 affords a yellowish red shade, referred to as scarlet. It exhibits good to excellent resistance to organic solvents, such as alcohols, esters, ketones, and aliphatic hydrocarbons. The pigment is more soluble in aromatic hydro...展开 C.I.NO.:PR242,PIGMENT RED 242 affords a yellowish red shade, referred to as scarlet. It exhibits good to excellent resistance to organic solvents, such as alcohols, esters, ketones, and aliphatic hydrocarbons. The pigment is more soluble in aromatic hydrocarbons. C.I.NO.:PR242,PIGMENT RED 242, like other members of its class, is fast to alkali and acid. This product is used in plastics, paints, and printing inks. 收起 | |
| PIGMENT RED 254(C.I.NO.:PR254,PIGMENT RED 254) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PR254,PIGMENT RED 254 is a DPP pigment which shows good coloristic and fastness properties. It is a widely used pigment for high industrial paints, especially in original automotive finishes and automotive refinishes. This product shows very good ...展开 C.I.NO.:PR254,PIGMENT RED 254 is a DPP pigment which shows good coloristic and fastness properties. It is a widely used pigment for high industrial paints, especially in original automotive finishes and automotive refinishes. This product shows very good fastness to organic solvents, fast blooming and bleeding, and good lightfastness and weatherfastness. It is used to color plastics which are processed at high temperatures. 收起 | |
| PIGMENT RED 255(C.I.NO.:PR255,PIGMENT RED 255) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PR255,PIGMENT RED 255 affords reddish shades of orange, actually scarlet shades, which are distinctly more yellowish than those of C.I.NO.:PR254,PIGMENT RED 254. It shows excellent hiding power, lightfastness, and weatherfastness. This product is ...展开 C.I.NO.:PR255,PIGMENT RED 255 affords reddish shades of orange, actually scarlet shades, which are distinctly more yellowish than those of C.I.NO.:PR254,PIGMENT RED 254. It shows excellent hiding power, lightfastness, and weatherfastness. This product is recommended for high grade lead-free industrial finishes, especially automotive O.E.M. finishes. It is also of interest for the use in tinting systems for decorative paints. Within the plastics area it can be used in rigid and plasticized PVC. The list of applications also includes packaging and decorative printing inks. 收起 | |
| PIGMENT RED 269 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 269的C.I.号码为PR269。它提供蓝色色调。这款颜料推荐用于打印油墨。 | |
| PIGMENT RED 272(C.I.NO.:PR272,PIGMENT RED 272) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PR272,PIGMENT RED 272 is a medium red shade pigment and exhibits high color strength. It is said to be designed for use in PE, PP and PVC plastics applications, such as injection molding, sheet and cable extrusion and calendering as well as PP fib...展开 C.I.NO.:PR272,PIGMENT RED 272 is a medium red shade pigment and exhibits high color strength. It is said to be designed for use in PE, PP and PVC plastics applications, such as injection molding, sheet and cable extrusion and calendering as well as PP fibers application. The heat stability in these plastic materials reaches 300°C in the mass tone and 260°C in white reductions with a very low influence on shrinkage in HDPE. The pigment demonstrates good lightfastness and weatherfastness, but mass tone colorations tend to darken. Due to its good opacity, the pigment is recommended in general industrial paint applications for lead- and cadmium-free formulations. 收起 | |
| PIGMENT RED 3 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 3也叫做C.I.NO.:PR3或甲苯胺红。它主要用于风干涂料。其色相随着粒径改变有很大变化，因此颜料制造商通常可以提供一系列品牌。较粗粒径的产品通常是蓝色的。甲苯胺红的全色彩非常耐光和耐候，但是随着添加白色颜料而迅速变差。该颜料推荐在全色或相似的深色调使用。推荐在室内应用或短期广告和标记等应用中使用。C.I.NO.:PR3, PIGMENT RED 3在打印油墨中的应用受到限制。在塑料行业，Toluidine Red仅限用于PVC。 | |
| PIGMENT RED 31 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 31 呈现出红中带蓝色调，波尔多红（枣红色）。它主要应用在橡胶中，它具有良好的耐光性。此产品据观察不会渗透到自然橡胶或织物背面。该颜料能抗冷、抗热开水、肥皂类脂肪酸盐，洗涤剂溶剂，5%个水乙酸，和50%乙醇水。在聚苯乙烯、聚甲基丙烯酸酯、不饱和聚酯树脂等类似的中介物，C.I.NO.:PR31，PIGMENT RED 31高度透明的中等红色，这可被用作汽车尾灯及其它信号灯目的。它在PS和PMA挤压制品中的热稳定性好（5分钟），可在最高约280°C仍然稳定。C.I.NO.:PR31, ...展开 PIGMENT RED 31 呈现出红中带蓝色调，波尔多红（枣红色）。它主要应用在橡胶中，它具有良好的耐光性。此产品据观察不会渗透到自然橡胶或织物背面。该颜料能抗冷、抗热开水、肥皂类脂肪酸盐，洗涤剂溶剂，5%个水乙酸，和50%乙醇水。在聚苯乙烯、聚甲基丙烯酸酯、不饱和聚酯树脂等类似的中介物，C.I.NO.:PR31，PIGMENT RED 31高度透明的中等红色，这可被用作汽车尾灯及其它信号灯目的。它在PS和PMA挤压制品中的热稳定性好（5分钟），可在最高约280°C仍然稳定。C.I.NO.:PR31, PIGMENT RED 31对常见的过氧化物催化剂很稳定。此颜料有很好耐光性(0.025%在PMA制剂中，1.5mm毫米厚度层:位于蓝色色标第七等)。C.I.NO.:PR31, PIGMENT RED 31也常被用于纺织印染。 收起 | |
| PIGMENT RED 48:1 (C.I.NO.:PR48:1, PIGMENT RED 48:1) | Shanghai Honor Industrial Co., LTD | PIGMENT RED 48:1是一种通用的钡盐颜料。根据产品的表面情况提供淡黄色到中等红色色调。在多种常见有机溶剂中的牢度良好，如酯，酮，脂肪族和芳香烃等。P.R.48:1的主要应用领域是在打印油墨和塑料行业中。为了在印刷中增加透明性和减少印刷变成青铜色的强烈倾向，设计用于打印油墨的颜料常常以树脂化形式供应。这款产品常用于廉价的工业涂料中，展现出良好的重涂色牢度。 | |
| PIGMENT RED 48:2 (C.I.NO.:PR48:2, PIGMENT RED 48:2) | Shanghai Honor Industrial Co., LTD | PIGMENT RED 48:2是一种钙盐颜料，赋予蓝红色或红宝石般的色调。它常用于凹版包装油墨，以及印刷油墨中，特别是以NC为基础的包装油墨中。这款产品推荐用于三和四色印刷区域，如杂志封面等。这款产品通常用于塑料，提供良好的着色强度。 | |
| PIGMENT RED 49:1 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 49:1是一种孔雀蓝，C.I. No.为PR49:1。它与Lake Red C颜料（P.R.53:1）在有机溶剂、酸碱和应用中的色牢度方面类似，热稳定性较差。应用方面，特别是在美国，包括弹性体，工业涂料，风干和硝基涂料。主要市场是印刷油墨。 | |
| PIGMENT RED 4(C.I.NO.:PR4,PIGMENT RED 4) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PR4, PIGMENT RED 4 is also known as chlorinated Para Red. The pigment affords a yellowish red shade. Full shades exhibits good lightfastness, but darken somewhat upon exposure. Addition of even small amounts of TiO2 reduces the lightfastness consi...展开 C.I.NO.:PR4, PIGMENT RED 4 is also known as chlorinated Para Red. The pigment affords a yellowish red shade. Full shades exhibits good lightfastness, but darken somewhat upon exposure. Addition of even small amounts of TiO2 reduces the lightfastness considerably. Only full and similarly deep shades tolerate weather. This product is recommended for printing inks (especially for offset printing, packaging gravure, and flexo printing), and specialized applications. 收起 | |
| PIGMENT RED 53:1 (C.I.NO.:PR53:1, PIGMENT RED 53:1) | Shanghai Honor Industrial Co., LTD | PIGMENT RED 53:1是在印刷油墨中使用的最重要的红色颜料之一。它在一次性印刷产品中使用，特别是单张和卷筒纸胶印，凹版印刷和柔版印刷油墨。这款产品在其色调范围内是相对强烈和明亮的颜料。PR53:1在一系列有机溶剂中有良好的牢度，作为塑料的着色剂有出色的热稳定性，还显示出中等着色强度。这款产品还可以在涂料中使用，可以满足对牢度特别是光牢度的要求。 | |
| PIGMENT RED 57:1 (C.I.NO.:PR57:1,PIGMENT RED 57:1) | Shanghai Honor Industrial Co., LTD | PIGMENT RED 57:1是一种在有机颜料中就产品量和使用率都排名较高的钙盐颜料。它有较高的着色强度，主要用于打印油墨中。塑料行业在应用性能要求不高的情况下使用这种颜料，特别是对耐光性要求不高时。这款颜料偶尔也会用于工业涂料中。 | |
| PIGMENT RED 81(C.I.NO.:PR81,PIGMENT RED 81) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PR81,PIGMENT RED 81 affords a very clean bluish red shade, which matches the purple-red on the DIN 16 508 color scale for letterpress application and also on the DIN 16 509 offset scale. It lacks fastness to polar solvents, such as alcohols, keton...展开 C.I.NO.:PR81,PIGMENT RED 81 affords a very clean bluish red shade, which matches the purple-red on the DIN 16 508 color scale for letterpress application and also on the DIN 16 509 offset scale. It lacks fastness to polar solvents, such as alcohols, ketones, and esters, as well as to the DIN 16 524 solvent mixture. However, C.I.NO.:PR81,PIGMENT RED 81 prints are very fast to aliphatic and aromatic hydrocarbons, paraffin, butter, and many other fats, although they are not entirely stable to sterilization. This product is used especially in three and four color printing and lends itself to various printing processes, therefore pigments of this type are referred to as “Process Red” in the USA. 收起 | |
| PIGMENT RED 8(C.I.NO:PR8,PIGMENT RED 8) | Shanghai Honor Industrial Co., LTD | C.I.NO:PR8, PIGMENT RED 8 affords clean, bluish shades of red. It is primarily used in the printing ink industry. It exhibits high tinctorial strength and produces brilliant prints. This product is used in prints which require no particular solvent resist...展开 C.I.NO:PR8, PIGMENT RED 8 affords clean, bluish shades of red. It is primarily used in the printing ink industry. It exhibits high tinctorial strength and produces brilliant prints. This product is used in prints which require no particular solvent resistance. The prints are fast to soap but not entirely stable to butter and paraffin. C.I.NO:PR8, PIGMENT RED 8 is used in a variety of special media outside the paints, printing inks, and plastics field, which is also true for other members of this class of pigments. One such application is in the paper industry, where the pigment is used for mass coloration and surface coating formulations. It also lends itself to application in artists’ colors and office articles. 收起 | |
| PIGMENT RED PR170 F3RK, C.I.NO.: PR170 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 170, C.I.NO.: PR170 F3RK70,HP Red 2130 is an AZO pigments with middium red shade, C.I.NO.: PR170,it is an opaque, high solvent stability, mainly used for industrial coatings, powder coatings, and also for PP, PVC colorants. | |
| PIGMENT VIOLET 23, C.I.NO.: PV23 | Shanghai Honor Industrial Co., LTD | PIGMENT VIOLET 23, C.I.NO.: PV23, HP Violet 6172, is a dioxazine violet with excellent weather fastness, solvent fastness, light fastness and high temperature stability organic pigments, high color strength with bluish shade violet, is recommended used f...展开 PIGMENT VIOLET 23, C.I.NO.: PV23, HP Violet 6172, is a dioxazine violet with excellent weather fastness, solvent fastness, light fastness and high temperature stability organic pigments, high color strength with bluish shade violet, is recommended used for industrial paints, coatings, and solvent inks, and high grade plastics calls. 收起 | |
| PIGMENT VIOLET 3(C.I.NO.:PV3,PIGMENT VIOLET 3) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PV3,PIGMENT VIOLET 3 provides a very bluish violet shade, which is considerably bluer than that of its counterparts C.I.NO.:PV1,PIGMENT VIOLET 1 and C.I.NO.:PV2,PIGMENT VIOLET 2. This product exhibits higher fastness properties than C.I.NO.:PV27,P...展开 C.I.NO.:PV3,PIGMENT VIOLET 3 provides a very bluish violet shade, which is considerably bluer than that of its counterparts C.I.NO.:PV1,PIGMENT VIOLET 1 and C.I.NO.:PV2,PIGMENT VIOLET 2. This product exhibits higher fastness properties than C.I.NO.:PV27,PIGMENT VIOLET 27. This is particularly true with respect to the lightfastness: This pigment is used primarily in printing inks, especially in flexographic and packaging gravure printing inks. The list of suitable media also includes oil-based vehicle systems. 收起 | |
| Pigment Yellow 110 1346 CI No. PY110, Used for Paints | Shanghai Honor Industrial Co., LTD | Pigment Yellow 110, C.I. No.110 is an Isoindol pigment with C.I. 56280, with strong reddish shade. There are two different codes for paints and plastics applications. It has excellent light, weather, heat, and migration resistance. This product is widely ...展开 Pigment Yellow 110, C.I. No.110 is an Isoindol pigment with C.I. 56280, with strong reddish shade. There are two different codes for paints and plastics applications. It has excellent light, weather, heat, and migration resistance. This product is widely used for metal deco paints, auto paints, and latex paints, plastics color concentrates for polypropylene, polyacrylonitrile and polyamide resins. It can also be used for different kinds of printing inks with good heat and solvent resistance properties. 收起 | |
| PIGMENT YELLOW 110 1387 CI NO. PY110 | Shanghai Honor Industrial Co., LTD | Pigment Yellow 110, C.I.NO.110 is an Isoindol pigment with C.I.56280. It has a strong reddish shade. There are two different codes for paint and plastic applications. This product has perfect light fastness, as well as weather, heat, and migration resista...展开 Pigment Yellow 110, C.I.NO.110 is an Isoindol pigment with C.I.56280. It has a strong reddish shade. There are two different codes for paint and plastic applications. This product has perfect light fastness, as well as weather, heat, and migration resistant properties. It is widely used for metal deco paints, auto paints and latex, as well as for plastic color concentrates for polypropylene, polyacrylonitrile and polyamide resins. This product is also recommended for different kinds of printing inks with good solvent and heat resistance. 收起 | |
| PIGMENT YELLOW 138, C.I.NO.PY138 | Shanghai Honor Industrial Co., LTD | PIGMENT YELLOW 138, C.I.NO.PY138 is a quinophthalone yellow pigment, with structure C.I.NO.56300. It is a greenish shade yellow pigment with perfect light fastness, weather fastness, and heat resistance stability. L0961HD offset is an opaque type used for...展开 PIGMENT YELLOW 138, C.I.NO.PY138 is a quinophthalone yellow pigment, with structure C.I.NO.56300. It is a greenish shade yellow pigment with perfect light fastness, weather fastness, and heat resistance stability. L0961HD offset is an opaque type used for paints and OEM applications, with good resistance to acid and alky. K0962 is used for PS ABS, polyurethane foams, and architectural paints. 收起 | |
| PIGMENT YELLOW 139 | Shanghai Honor Industrial Co., LTD | 颜料黄139，C.I.NO.: PY139是一种略带红色的黄色，适用于涂料，塑料和打印油墨。不同的粒径分布效果显示不同颜色的特点。比如不透明类具有偏红的色调和良好的光泽度，耐光性和耐候性。这款颜料与无机颜料相结合以代替铭黄。它有三种不同的颗粒尺寸，可以应用于各种应用中。 | |
| PIGMENT YELLOW 150, C.I.NO.: PY150 | Shanghai Honor Industrial Co., LTD | 颜料黄150, C.I.NO.: PY150是一种具有绿色调的偶氮络合物颜料，它有良好的耐光性和总体的牢固度，并具有出色的耐热性。颜料黄150是已经建立的绿色调黄色的标准颜色索引，用于喷墨打印油墨，水基装饰凹版印刷油墨。 | |
| PIGMENT YELLOW 151, C.I.NO.: PY151 | Shanghai Honor Industrial Co., LTD | PIGMENT YELLOW 151, C.I.PY151, HP Yellow 13110 is a Benzimidazolone pigments with color index number PIGMENT YELLOW 151 (PY151), this pigments is a Benzimidazolone yellow, more greenish shade yellow than PY154, with outstanding lightfastness, excellent he...展开 PIGMENT YELLOW 151, C.I.PY151, HP Yellow 13110 is a Benzimidazolone pigments with color index number PIGMENT YELLOW 151 (PY151), this pigments is a Benzimidazolone yellow, more greenish shade yellow than PY154, with outstanding lightfastness, excellent heat stability, opaque, no wraping pigments. Yellow 13110 is recommended for use in Various plasics such for PP, PE, Rubber, PET, PVC etc. 收起 | |
| PIGMENT YELLOW 154, C.I.NO.: PY154 | Shanghai Honor Industrial Co., LTD | 颜料黄154, C.I.NO.: PY154, HP Yellow 1619 是一种苯并咪唑颜料，其颜色索引编号为颜料黄 (PY154)。这款颜料是苯并咪唑颜料黄，具有出色的耐光性，极好的溶剂稳定性，不透明。颜料黄1619推荐用于各种涂料，如汽车涂料，工业涂料，溶剂涂料等。 | |
| PIGMENT YELLOW 168 | Shanghai Honor Industrial Co., LTD | PIGMENT YELLOW 168是一种在油漆和塑料中使用的钙颜料。它对脂肪族和芳香烃显示出良好的牢度。但是对酒精，酯和酮类只显示出了有限的抵抗性。它有较好的耐酸碱性。P.Y.168在增塑PVC上有良好的耐迁移性，但是其着色强度相对较差。在HDPE，这种颜料影响挤出产品的收缩，这是这种类型颜料的典型特点。P.Y.168推荐用于LDPE。 | |
| PIGMENT YELLOW 17 | Shanghai Honor Industrial Co., LTD | PIGMENT YELLOW 17可被用于印刷油墨和塑料领域，并且此颜料呈绿色状。大多市售P.Y.17类型是高度透明的。P.Y.17适合用于所有的印刷技术。它比标准黄色更绿在胶印与凸版印刷中。P.Y.17也应用在各种包装和印刷油墨中。P.Y.17在包装印刷业有很大的用处，其应用作为颜料制剂的形式。塑料行业已广泛的使用了P.Y.17。 | |
| PIGMENT YELLOW 181(C.I.NO.:PY181,PIGMENT YELLOW 181) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PY181,PIGMENT YELLOW 181 is a reddish yellow pigment. Its main area of application is in plastics, especially in polyolefins. In these media, it is heat stable up to 300°C and very lightfast. The pigment does not affect the shrinkage of the partia...展开 C.I.NO.:PY181,PIGMENT YELLOW 181 is a reddish yellow pigment. Its main area of application is in plastics, especially in polyolefins. In these media, it is heat stable up to 300°C and very lightfast. The pigment does not affect the shrinkage of the partially crystalline polymer. Its tinctorial strength is poor. C.I.NO.:PY181,PIGMENT YELLOW 181 shows excellent lightfastness in plasticized PVC, and does not migrate. This product is extremely heat stable, which makes it a suitable pigment for other polymers which are processed at high or very high temperature. The list includes PS, ABS, polyester, polyacetal, and various other technical plastics. 收起 |
