| ANTIGEL® | Bernd Schwegmann GmbH & Co. KG | Antigel®主要用于基于醇酸、醇酸/三聚氰胺、硝化纤维化合物和聚酯的含溶剂体系。Antigel®应用于基于醇酸或醇酸/丙烯酸的水稀释体系中，也具有上述性能 | |
| ANTIGEL® HS | Bernd Schwegmann GmbH & Co. KG | 具有良好润湿性和分散性的粘度稳定剂，尤其适合高固体份涂料体系，不含酮肟和芳香族化合物，可生物降解 | |
| ANTIGEL® KF | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF是一种多功能助剂，适合溶剂型和水性涂料体系。它不含酮肟和芳香族化合物，可生物降解。ANTIGEL® KF-D的多功能性源于各组分的协同增效作用。其稳定作用基于抗氧化剂的氧结合特性。ANTIGEL® KF-D改善了流平性和全干性。ANTIGEL® KF-D降低常用亲水颜料和憎水基料之间的界面张力。颜料颗粒分布均匀，因而色度深。可减少分散时间、絮凝和沉降现象，提升光泽度。大大避免了沉降发生。由于它具有出色的润湿性，可获得最佳的颜色深度 | |
| ANTIGEL® KF-D | Bernd Schwegmann GmbH & Co. KG | Antigel® KF/KF-D可用于几乎所有常规水性和溶剂型油漆体系中 | |
| BLISTER FREE 3 | Bernd Schwegmann GmbH & Co. KG | Blister Free 3可用于含溶剂和水稀释体系。在含溶剂体系中，Blister Free 3作为消泡剂尤为有效，也可部分作为流平剂。它适用于以下基料：醇酸、醇酸/聚酯-、不饱和聚酯-、NC-、AC-、PU和丙烯酸体系。Blister Free 3在水稀释涂料体系中也非常有效，尤其是基于醇酸/丙烯酸、饱和聚酯和环氧体系 | |
| BLISTER FREE 45 | Bernd Schwegmann GmbH & Co. KG | Blister Free 45在以下溶剂型体系中具有良好的消泡效果，基于硝基纤维素、酸催化、通用聚氨酯。Blister Free 45对于水稀释涂料也具有非常好的消泡效果，基于以下基料：聚酯、酸性树脂、丙烯酸 | |
| BLISTER FREE 54 | Bernd Schwegmann GmbH & Co. KG | Blister Free 54可有效应用于几乎所有含溶剂单或多组分油漆和涂料体系，包括自干和烘烤醇酸、环氧体系、PU体系、丙烯酸，特殊的应用领域是印刷油墨和卷材涂料体系 | |
| BLISTER FREE 55 | Bernd Schwegmann GmbH & Co. KG | Blister Free 55在各种水性醇酸体系中具有出色的消泡效果，例如那些中和后变水溶性，以及在醇酸乳液中，含或不含助溶剂的。在很多改性醇酸和醇酸/丙烯酸混合体系中也具有非常好的消泡效果 | |
| BLISTER FREE 56 | Bernd Schwegmann GmbH & Co. KG | Blister Free 56 可用于UV固化体系。它可用于下面提到的水稀释体系。Blister Free 56具有良好的消泡效果，它在这些体系：醇酸/丙烯酸油漆、饱和聚酯、环氧中有部分流平功能 | |
| BLISTER FREE 66 | Bernd Schwegmann GmbH & Co. KG | Blister Free 66可作为消泡剂应用于所有常规涂料体系中。Blister Free 66 在基于聚酯、聚氨酯和丙烯酸酯的体系中尤为有效 | |
| BLISTER FREE 75 | Bernd Schwegmann GmbH & Co. KG | Blister Free 75在常规NC体系和NC混合体系、AC和环氧体系、PU和自干丙烯酸体系中具有良好的消泡效果。Blister Free 75在基于以下基料：长油度醇酸、中油度醇酸、丙烯酸酯/中油度醇酸、丙烯酸酯/长油度醇酸、环氧的水稀释涂料体系中具有非常好的消泡效果 | |
| BLISTER FREE 77 | Bernd Schwegmann GmbH & Co. KG | 完全消泡是形成一个出色涂膜的必要条件。吸附的空气、针孔会导致灰尘粘附并造成喷涂面漆和抛光操作困难。除了导致这些表面缺陷，它也经常会降低光泽和耐水性。Blister Free 77可相当大程度上减少气泡形成，造成强烈消泡，并均一地形成不饱和聚酯蜡层 | |
| BLISTER FREE 88 | Bernd Schwegmann GmbH & Co. KG | Blister Free 88是一种表面活性添加剂，会影响表面张力。该性能可减少在油漆的生产或施工过程中气泡的形成。任何形成的气泡都可被快速摧毁。通常Blister Free 88对涂膜流平具有良好的效果 | |
| DHA-101 | ANHUI DONGHUI INTERNATIONAL | DHA-101 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98%. This product offers covering power, exceptional whiteness, good dispersion, and heating stability in paint applications. It has a specific gravity of 3.8 g/cm3, a refr...展开 DHA-101 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98%. This product offers covering power, exceptional whiteness, good dispersion, and heating stability in paint applications. It has a specific gravity of 3.8 g/cm3, a refractive index of 2.5, an oil absorption of ≤26g/100g, and a pH of 6.5 to 8.5. 收起 | |
| DHA-102 | ANHUI DONGHUI INTERNATIONAL | DHA-102 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98.5%. This product has a coating layer that can be thin and even, with high impacting and mechanical resistance in enamel applications. It has a specific gravity of 3.8 g/...展开 DHA-102 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98.5%. This product has a coating layer that can be thin and even, with high impacting and mechanical resistance in enamel applications. It has a specific gravity of 3.8 g/cm3 and a refractive index of 2.5. 收起 | |
| Forton® VF 774 | CCA | FORTON® VF 774 is an all acrylic, co-polymer dispersion specifically formulated for the Glass Fiber Reinforced Concrete (GFRC) production process as well as for concrete and concrete repair products. VF-774 is UV stable and is further formulated to be sta...展开 FORTON® VF 774 is an all acrylic, co-polymer dispersion specifically formulated for the Glass Fiber Reinforced Concrete (GFRC) production process as well as for concrete and concrete repair products. VF-774 is UV stable and is further formulated to be stable and durable in the high pH Portland cement-based GFRC composite. 收起 | |
| Hauthane HD-2101 | Hauthaway | Hauthane HD-2101 is a soft, aliphatic, polyester-based, aqueous polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. HD-2101 can be used as a sole vehicle or blended with harder polyuretha...展开 Hauthane HD-2101 is a soft, aliphatic, polyester-based, aqueous polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. HD-2101 can be used as a sole vehicle or blended with harder polyurethane dispersions or acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-2107 | Hauthaway | Hauthane HD-2107 is an aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-2107 ca...展开 Hauthane HD-2107 is an aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-2107 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-2113 | Hauthaway | Hauthane HD-2113 is a very hard, aliphatic, polyester-based, aqueous polyurethane dispersion specifically developed for factory coated PVC flooring. It is ideally suited for PVC roll or sheet goods requiring maximum stain and abrasion resistance without t...展开 Hauthane HD-2113 is a very hard, aliphatic, polyester-based, aqueous polyurethane dispersion specifically developed for factory coated PVC flooring. It is ideally suited for PVC roll or sheet goods requiring maximum stain and abrasion resistance without the requirement for 180 degree reverse bend. HD-2113 may be used as supplied or blended with acrylic emulsions for application by spray, rotogravure, reverse roll, flexible blade, or wire wound rod. 收起 | |
| Hauthane HD-2117 | Hauthaway | Hauthane HD-2117 is an extremely hard, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, including concret...展开 Hauthane HD-2117 is an extremely hard, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-2117 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance. HD-2117 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-2120 | Hauthaway | Hauthane HD-2120 is a very hard, aliphatic, polyester polyurethane dispersion. It was developed for use on flexible and rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-compon...展开 Hauthane HD-2120 is a very hard, aliphatic, polyester polyurethane dispersion. It was developed for use on flexible and rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-component polyurethane performance levels. Superior adhesion to PVC makes it the ideal candidate for automotive interior parts, vinyl furniture and components. HD-2120 can be used as a sole vehicle or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-2125 | Hauthaway | Hauthane HD-2125 is a hard, chemical-resistant, polyester-based, aliphatic, polyurethane dispersion. It was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementatious, meta...展开 Hauthane HD-2125 is a hard, chemical-resistant, polyester-based, aliphatic, polyurethane dispersion. It was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementatious, metal and wood substrates. This product exhibits superior chemical resistance properties, while maintaining excellent flexibility and gloss retention characteristics. HD-2125 may be used as a sole vehicle or blended with acrylic emulsions for spray or brush applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-2139 | Hauthaway | Hauthane HD-2139 is an aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring. It was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating du...展开 Hauthane HD-2139 is an aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring. It was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating during PVC expansion. HD-2139 is ideally suited for PVC roll or sheet goods requiring a 180 degree reverse bend. HD-2139 can be used as a sole vehicle or blended with acrylic emulsions and applied by rotogravure, reverse roll, flexible blade, or wire wound rod. It may be thickened for alternative application methods. 收起 | |
| Hauthane HD-2142 | Hauthaway | Hauthane HD-2142 is an aliphatic, polyester-based, water-borne polyurethane dispersion. It was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, chemical- and stain-resistant fi...展开 Hauthane HD-2142 is an aliphatic, polyester-based, water-borne polyurethane dispersion. It was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, chemical- and stain-resistant films. Superior adhesion to PVC makes it the ideal candidate for vinyl sheet goods, automotive interior parts, vinyl furniture and components. HD-2142 may be used as a sole vehicle or blended with acrylic emulsions. Viscosity modification can be made with associative thickeners for application via spray, knife-over-roll, or other methods. 收起 | |
| Hauthane HD-2209 | Hauthaway | Hauthane HD-2209 is an aliphatic, polyester-based, aqueous polyurethane dispersion designed to produce unequaled clarity and gloss. It was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates...展开 Hauthane HD-2209 is an aliphatic, polyester-based, aqueous polyurethane dispersion designed to produce unequaled clarity and gloss. It was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates. Use wherever gloss and clarity are of paramount importance. HD-2209 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. It may be thickened with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-2334 | Hauthaway | Hauthane HD-2334 is a co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 w...展开 Hauthane HD-2334 is a co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 will enable synthetic fabrics to pass various FR tests including NFPA-701, MVSS-302 and others. The film properties of HD-2334 also provide a stiff hand and excellent molding/pleating properties. Due to its aliphatic composition, excellent UV resistance is also exhibited. 收起 | |
| Hauthane HD-2501 | Hauthaway | Hauthane HD-2501 is a soft, aliphatic, polycarbonate-based, polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. HD-2501 can be used as a sole vehicle or blended with acrylic emulsions for...展开 Hauthane HD-2501 is a soft, aliphatic, polycarbonate-based, polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. HD-2501 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. It may be thickened with associative thickeners for knife-over-roll or similar methods. 收起 | |
| Hauthane HD-2503 | Hauthaway | Hauthane HD-2503 is a polycarbonate-based, aliphatic, water-borne polyurethane dispersion. It was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradati...展开 Hauthane HD-2503 is a polycarbonate-based, aliphatic, water-borne polyurethane dispersion. It was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradation. HD-2503 is ideally suited for exterior applications where film durability and longevity are important considerations. HD-2503 may be formulated into coatings applied by spray, brush or pad applicator. It can be used as a sole vehicle or blended with acrylic emulsions. The rheology may be modified with associative thickeners. 收起 | |
| Hauthane HD-2504 | Hauthaway | Hauthane HD-2504 is a very hard, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. It was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. HD-2504 is ideally suited ...展开 Hauthane HD-2504 is a very hard, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. It was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. HD-2504 is ideally suited for exterior applications where film durability and longevity are important considerations. HD-2504 may be used as a sole vehicle or blended with acrylic emulsions for application by conventional or air-assisted spray equipment. It may be thickened with associative thickeners to attain desired application viscosity. 收起 | |
| Hauthane HD-2602 | Hauthaway | Hauthane HD-2602 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602 contains a non-fugitive silic...展开 Hauthane HD-2602 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles. HD-2602 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-3011 | Hauthaway | Hauthane HD-3011 is a low cost, aromatic, polyether-based, aqueous polyurethane dispersion. It is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prev...展开 Hauthane HD-3011 is a low cost, aromatic, polyether-based, aqueous polyurethane dispersion. It is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prevent blocking problems. Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications. Compatible with acrylic and other aqueous polymers for optimum cost/performance balance. HD-3011 can be used as a sole vehicle or blended with acrylic emulsions for spray, dip, or rotogravure applications. It can be thickened with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-4664 | Hauthaway | Hauthane HD-4664 is a medium soft, high solids, co-solvent free, aliphatic, polyurethane dispersion. It was designed as a high solids, multi-purpose textile binder polymer. It may be used as a blending resin for harder polyurethane polymers to impart grea...展开 Hauthane HD-4664 is a medium soft, high solids, co-solvent free, aliphatic, polyurethane dispersion. It was designed as a high solids, multi-purpose textile binder polymer. It may be used as a blending resin for harder polyurethane polymers to impart greater film flexibility. A balanced composition provides good stability with acrylic latices and confers superior strength, abrasion resistance and low temperature flexibility properties. HD-4664 can be used as a sole vehicle or blended with acrylic emulsions for spray or pad bath applications. Solids can be reduced with water to optimize dry coating weight. This product may also be thickened with associative thickeners for knife-over-roll or similar methods. 收起 | |
| Hauthane HD-4669 | Hauthaway | Hauthane HD-4669 is a hard, co-solvent free, aliphatic, aqueous polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-4669 can be used as a sole vehicle or blende...展开 Hauthane HD-4669 is a hard, co-solvent free, aliphatic, aqueous polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-4669 can be used as a sole vehicle or blended with acrylic emulsions for spray, dip or rotogravure applications. It may be thickened with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-4675 | Hauthaway | Hauthane HD-4675 is a hard, co-solvent free, aliphatic, polyester polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-4675 can be used as supplied or blended wi...展开 Hauthane HD-4675 is a hard, co-solvent free, aliphatic, polyester polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-4675 can be used as supplied or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for knife-over-roll or similar methods. 收起 | |
| Hauthane HD-5002 | Hauthaway | Hauthane HD-5002 is a cost effective, aliphatic polyurethane/acrylic hybrid dispersion with an exceptional balance of properties. It was designed for coatings applications on a wide variety of plastic substrates, including ABS, Lexan, Noryl and polystyren...展开 Hauthane HD-5002 is a cost effective, aliphatic polyurethane/acrylic hybrid dispersion with an exceptional balance of properties. It was designed for coatings applications on a wide variety of plastic substrates, including ABS, Lexan, Noryl and polystyrene where abrasion and chemical resistance properties are required. HD-5002 can be used as a sole vehicle for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-6000 | Hauthaway | Hauthane HD-6000 is a polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstrop’s Easaqua X D 401 / M 501. The pr...展开 Hauthane HD-6000 is a polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstrop’s Easaqua X D 401 / M 501. The product, when crosslinked provides tough, chemical resistant, glossy coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. This product exhibits superior chemical resistance, while maintaining excellent flexibility and gloss retention characteristics. HD-6000 crosslinked with water-dispersible isocyanates may be spray applied using single-component equipment. 收起 | |
| Hauthane HD-6002 | Hauthaway | Hauthane HD-6002 is a polycarbonate-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer's Bayhydur 302 or Perstorp's Easaqua D 401/501. The prod...展开 Hauthane HD-6002 is a polycarbonate-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer's Bayhydur 302 or Perstorp's Easaqua D 401/501. The product, when crosslinked provides tough, chemical resistant, glossy coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. This product exhibits superior chemical resistance, while maintaining excellent flexibility and gloss retention characteristics. HD-6002 crosslinked with water-dispersible isocyanates may be spray applied using single-component equipment. 收起 | |
| Hauthane L-2020 | Hauthaway | Hauthane L-2020 is a low cost, co-solvent free, aromatic, polyether-based, polyurethane dispersion. It is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point propert...展开 Hauthane L-2020 is a low cost, co-solvent free, aromatic, polyether-based, polyurethane dispersion. It is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prevent blocking problems. Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications. Compatible with acrylic and other aqueous polymers for optimum cost/performance balance. L-2020 may be spray or pad bathed as supplied. It may be thickened for knife- over-roll or similar methods. 收起 | |
| Hauthane L-2357 | Hauthaway | Hauthane L-2357 is a branched, aliphatic, co-solvent free, polyether-based, polyurethane dispersion. It was designed for a variety of coating and adhesive applications where the chemical- and thermal-resistance of a crosslinked system are required, but t...展开 Hauthane L-2357 is a branched, aliphatic, co-solvent free, polyether-based, polyurethane dispersion. It was designed for a variety of coating and adhesive applications where the chemical- and thermal-resistance of a crosslinked system are required, but the use of a multiple component system is neither feasible nor desirable. L-2357 can be used as supplied or blended with acrylic emulsions for spray or rotogravure applications. It can be thickened with associative thickeners for knife-over-roll or similar methods. 收起 | |
| Hauthane L-2728 | Hauthaway | Hauthane L-2728 is an experimental, non-halogenated, aliphatic, water-borne polyurethane dispersion. It was developed for use on un-primed, un-treated flexible TPO. Coatings containing this polymer form tough, flexible films. Excellent adhesion to TPO mak...展开 Hauthane L-2728 is an experimental, non-halogenated, aliphatic, water-borne polyurethane dispersion. It was developed for use on un-primed, un-treated flexible TPO. Coatings containing this polymer form tough, flexible films. Excellent adhesion to TPO makes it the ideal candidate for sheet goods used in upholstered furniture, canopies, signs and other fabricated articles. L-2728 may be formulated for spray or rotogravure applications. Viscosity modifications may be made with associative thickeners for knife-over-roll or similar methods. 收起 | |
| Hauthane L-2857 | Hauthaway | Hauthane L-2857 is an NMP-free, APEO-free, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-2857 contains a non-fugiti...展开 Hauthane L-2857 is an NMP-free, APEO-free, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-2857 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles. L-2857 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-2875 | Hauthaway | Hauthane L-2875 is a hard, NMP-free, aliphatic, polyester polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-2875 can be used as supplied or blended with acryli...展开 Hauthane L-2875 is a hard, NMP-free, aliphatic, polyester polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-2875 can be used as supplied or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for knife-over-roll or similar methods. 收起 | |
| Hauthane L-2877 | Hauthaway | Hauthane L-2877 is a hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, pla...展开 Hauthane L-2877 is a hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-2877 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-2882 | Hauthaway | Hauthane L-2882 is a very hard, NMP-free, APEO-free, aliphatic, polyester polyurethane dispersion. It was developed for use on rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2...展开 Hauthane L-2882 is a very hard, NMP-free, APEO-free, aliphatic, polyester polyurethane dispersion. It was developed for use on rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-component polyurethane performance levels. Superior adhesion to PVC makes it the ideal candidate for automotive interior parts, vinyl furniture and components. L-2882 can be used as a sole vehicle or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-2883 | Hauthaway | Hauthane L-2883 is an NMP-free, APEO-free, polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstorp’s Easaqua X ...展开 Hauthane L-2883 is an NMP-free, APEO-free, polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstorp’s Easaqua X D 401. The product, when crosslinked provides tough, chemical-resistant, semi-gloss coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. L-2883 crosslinked with water-dispersible isocyanates may be spray applied using single-component equipment. 收起 | |
| Hauthane L-2892 | Hauthaway | Hauthane L-2892 is extremely hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, ...展开 Hauthane L-2892 is extremely hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-2892 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance. L-2892 can be used as a sole resin vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-2896 | Hauthaway | Hauthane L-2896 is a polycarbonate-based, aliphatic, water-borne polyurethane dispersion. It was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradatio...展开 Hauthane L-2896 is a polycarbonate-based, aliphatic, water-borne polyurethane dispersion. It was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradation. L-2896 is ideally suited for exterior applications where film durability and longevity are important considerations. L-2896 may be formulated into coatings applied by spray, brush or pad applicator. It can be used as a sole vehicle or blended with acrylic emulsions. The rheology may be modified with associative thickeners. 收起 | |
| Hauthane L-2897 | Hauthaway | Hauthane L-2897 is a hard, NMP-free, APEO-free, alcohol-resistant, aliphatic, polyester, water-borne polyurethane dispersion. It was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topco...展开 Hauthane L-2897 is a hard, NMP-free, APEO-free, alcohol-resistant, aliphatic, polyester, water-borne polyurethane dispersion. It was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementatious, metal and wood substrates. This product exhibits superior chemical resistance properties, while maintaining excellent flexibility and gloss retention characteristics. L-2897 may be used as a sole vehicle or blended with acrylic emulsions for spray or brush applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-2942 | Hauthaway | Hauthane L-2942 is an NMP-free, APEO-free, aliphatic, polyester-based, water-borne polyurethane dispersion. It was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, hydrolysis-,...展开 Hauthane L-2942 is an NMP-free, APEO-free, aliphatic, polyester-based, water-borne polyurethane dispersion. It was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films. Superior adhesion to PVC makes it the ideal candidate for vinyl sheet goods, automotive interior parts, vinyl furniture and components. L-2942 may be used as a sole vehicle or blended with acrylic emulsions. Viscosity modification can be made with associative thickeners for application via spray, knife-over-roll, or other methods. 收起 | |
| Hauthane L-2969 | Hauthaway | Hauthane L-2969 is a soft, aliphatic, polyester-based, aqueous polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. L-2969 may also be used as a blending resin with harder polyurethane dis...展开 Hauthane L-2969 is a soft, aliphatic, polyester-based, aqueous polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. L-2969 may also be used as a blending resin with harder polyurethane dispersions to impart flexibility without adversely effecting chemical resistance. L-2969 can be used as a sole vehicle or blended with harder polyurethane dispersions or acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-2996 | Hauthaway | Hauthane L-2996 is an NMP-free, APEO-free, polycarbonate-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers. The product, when crosslinked provides tough, ch...展开 Hauthane L-2996 is an NMP-free, APEO-free, polycarbonate-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers. The product, when crosslinked provides tough, chemical resistant, glossy coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. This product exhibits superior chemical resistance, while maintaining excellent flexibility and gloss retention characteristics. L-2996 crosslinked with water-dispersible isocyanates may be spray applied using single-component equipment. 收起 | |
| Hauthane L-3033 | Hauthaway | Hauthane L-3033 is a formulated polyurethane topcoat which gives a soft, silky feel at low gloss levels (2-4 gloss at 60 degree geometry). It is designed primarily for use on synthetic leather-like surfaces such as PVC, urethane, and various TPO's, as wel...展开 Hauthane L-3033 is a formulated polyurethane topcoat which gives a soft, silky feel at low gloss levels (2-4 gloss at 60 degree geometry). It is designed primarily for use on synthetic leather-like surfaces such as PVC, urethane, and various TPO's, as well as plastic films and other smooth surfaces. L-3033 does not have defoamer or wetting agent, allowing the formulator flexibility of selection for his specific application. May be applied by rotogravure, wire wound rod and spray. 收起 | |
| Hauthane L-3040 | Hauthaway | Hauthane L-3040 is an NMP-free/APEO-free aliphatic, polyester-based, polyurethane dispersion designed to produce unequaled clarity and gloss. It was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible ...展开 Hauthane L-3040 is an NMP-free/APEO-free aliphatic, polyester-based, polyurethane dispersion designed to produce unequaled clarity and gloss. It was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates. Use wherever gloss and clarity are of paramount importance. L-3040 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. It may be thickened with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-3101 | Hauthaway | Hauthane L-3101 is a very hard, NMP-free/APEO-free, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. It was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. L-3101 ...展开 Hauthane L-3101 is a very hard, NMP-free/APEO-free, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. It was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. L-3101 is ideally suited for exterior applications where film durability and longevity are important considerations. L-3101 may be used as a sole vehicle or blended with acrylic emulsions for application by conventional or air-assisted spray equipment. It may be thickened with associative thickeners to attain desired application rheology. 收起 | |
| Hauthane L-3121 | Hauthaway | Hauthane L-3121 is a soft, NMP-free, aliphatic, polycarbonate-based, polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. L-3121 can be used as a sole vehicle or blended with acrylic emuls...展开 Hauthane L-3121 is a soft, NMP-free, aliphatic, polycarbonate-based, polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. L-3121 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. It may be thickened with associative thickeners for knife-over-roll or similar methods. 收起 | |
| Hauthane L-3155 | Hauthaway | Hauthane L-3155 is a self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use in high performance concrete and wood floor coatings. It employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-...展开 Hauthane L-3155 is a self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use in high performance concrete and wood floor coatings. It employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-resistance and mar-resistance properties which equal or exceed those of two-component, water-based floor coating systems currently used in the market. L-3155 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-3225 | Hauthaway | Hauthane L-3225 is a hard, co-solvent free, aliphatic, polyester polyurethane dispersion. This is a self-coalescing version of HD-4675. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. ...展开 Hauthane L-3225 is a hard, co-solvent free, aliphatic, polyester polyurethane dispersion. This is a self-coalescing version of HD-4675. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-3225 can be used as supplied or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for knife-over-roll or similar methods. 收起 | |
| Hauthane L-3310 | Hauthaway | Hauthane L-3310 is a hard, self-coalescing, aliphatic, polyester-based, polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for low VOC (<100 g/l) topcoat formulations used on a wide variety of substrat...展开 Hauthane L-3310 is a hard, self-coalescing, aliphatic, polyester-based, polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for low VOC (<100 g/l) topcoat formulations used on a wide variety of substrates, including concrete, metal, plastic and wood. L-3310 is ideal for use in applications where excellent flow and leveling properties, and high levels of water- and chemical-resistance are required. L-3310 can be used as a sole vehicle or blended with acrylic emulsions for spray, brush or roller applications. Rheology modifications can be made with associative thickeners. 收起 | |
| Hauthane L-3369 | Hauthaway | Hauthane L-3369 is a partially, renewable resource-based, hard, aliphatic, polyester-based, aqueous polyurethane dispersion with good chemical and water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, inclu...展开 Hauthane L-3369 is a partially, renewable resource-based, hard, aliphatic, polyester-based, aqueous polyurethane dispersion with good chemical and water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-3369 produces glossy films with excellent leveling properties and good stain- and chemical-resistance to a variety of household food and cleaning products. L-3369 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-3385 | Hauthaway | Hauthane L-3385 is a self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use in high performance concrete and wood floor coatings. It employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-...展开 Hauthane L-3385 is a self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use in high performance concrete and wood floor coatings. It employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-resistance and mar-resistance properties which equal or exceed those of two-component, water-based floor coating systems currently used in the market. L-3385 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-3415 | Hauthaway | Hauthane L-3415 is a VOC-free, water-borne, UV-curable polyurethane dispersion. It is designed for UV-cured wood and plastic topcoat applications where highly chemical- and abrasion-resistant films are required. Potential end-use applications include auto...展开 Hauthane L-3415 is a VOC-free, water-borne, UV-curable polyurethane dispersion. It is designed for UV-cured wood and plastic topcoat applications where highly chemical- and abrasion-resistant films are required. Potential end-use applications include automotive plastics, kitchen cabinets and wood flooring. L-3415 may be applied by spray or gravure methods. Films must be dried completely before UV energy cure. 收起 | |
| Hauthane L-3466 | Hauthaway | Hauthane L-3466 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466 contains a non-fugitive silicon...展开 Hauthane L-3466 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including leather, plastics, metals and textiles. It also demonstrates exceptional dye transfer resistance in automotive leather seating and dry-erase, white board applications when crosslinked. L-3466 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| KLX 7997 | Nokxeller Quimica Ltda | KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for mo...展开 KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. 收起 | |
| KORRODUR | Bernd Schwegmann GmbH & Co. KG | Korrodur主要作为一种锈转化助剂应用于常规醇酸树脂涂料中。然而，Korrodur在基于环氧、氯化橡胶或丙烯酸基料的含溶剂油漆中也有良好效果。典型应用：防锈底漆、单层防腐蚀体系、修补面漆 | |
| KORRODUR AL 2 | Bernd Schwegmann GmbH & Co. KG | Korrodur AL 2用于底漆中消除差的基材和差强人意的喷涂条件的影响。Korrodur AL 2可将残留的锈转换成非腐蚀性丹宁酸铁，并提供长期腐蚀保护。如果存在湿气，它会在喷涂过程中乳化进入膜中，干燥时会蒸发。润湿剂可确保对残留锈颗粒、灰尘的良好渗透以及对除油很差的表面的润湿 | |
| LA THIX FB | Bernd Schwegmann GmbH & Co. KG | 可增稠所有常规带极性基团基料的含溶剂体系。尤其适用于高膜厚体系、纹理烤漆、墙面和DIY油漆。主要优势为：液态，因此易添加、耐温、对光泽无负面影响、可防止沉降和流挂 | |
| MITTEL S | Bernd Schwegmann GmbH & Co. KG | Mittel S适用于几乎所有非水性体系，可高效应用于醇酸（自干）、醇酸/聚酯（热固化）、氯化橡胶、环氧、聚氨酯、热塑性丙烯酸和反应性丙烯酸体系 | |
| NKX 144 | Nokxeller Quimica Ltda | NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents e...展开 NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents excellent weatherability. It is ideal for use as a topcoat for leather finish and PVC, indoor paints formulation, etc. 收起 | |
| NKX 176 | Nokxeller Quimica Ltda | NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied ...展开 NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied possibility of uses. NKX 176 has a flexible and soft but non-tacky handle. It has varied applications especially in textile finishes where body handle, durability are required. It is ideal for use as a print binder and as an universal coating resin in textile applications, garment leather finish, and coatings for digital printing in fabrics. 收起 | |
| NKX 183 | Nokxeller Quimica Ltda | NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high cr...展开 NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high crystalline segment concentration the polymer presents itself tough, yet flexible and resistant. 收起 | |
| NKX 201 NMP-Free | Nokxeller Quimica Ltda | NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as hi...展开 NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as high gloss topcoats in leather finish, wood flooring or print screen putties, metallic applications. 收起 | |
| NKX 240 | Nokxeller Quimica Ltda | NKX 240 is a multipurpose resin of exceptional properties was developed to serve a wide range of applications for flexible and rigid substrates. NKX 240 shows up a clear film with good gloss retention and presents high adhesion and heat resistance. | |
| NKX 245 | Nokxeller Quimica Ltda | NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigm...展开 NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigment dispersions, fillers, thickeners, etc. 收起 | |
| NKX 250 | Nokxeller Quimica Ltda | NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion an...展开 NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion and gloss. 收起 | |
| NKX 274 | Nokxeller Quimica Ltda | NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic subs...展开 NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic substrate paint compositions wherever high gloss, good adhesions and chemical resistance are necessary. 收起 | |
| NKX 279 | Nokxeller Quimica Ltda | NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface...展开 NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface , plastics and especially PVC and other synthetic laminates.NKX 279 is high performance water based coating and can replace traditional solvent based coatings in wide applications possibilities. 收起 | |
| NO SED | Bernd Schwegmann GmbH & Co. KG | 防沉降助剂，适合溶剂型涂料 | |
| NovoColor® HP II | CCA | NovoColor® HP II is the next generation of waterborne pigment dispersions specifically engineered for use in decorative and waterborne industrial coatings systems to help formulators meet stringent VOC restrictions. Designed for point of sale applications...展开 NovoColor® HP II is the next generation of waterborne pigment dispersions specifically engineered for use in decorative and waterborne industrial coatings systems to help formulators meet stringent VOC restrictions. Designed for point of sale applications. 收起 | |
| NovoColor® II | CCA | NovoColor® II is a low VOC universal colorant designed for point of sales usage in decorative and light industrial coatings. Formulated without APEO or ethylene and propylene glycols. | |
| NovoColor® IP | CCA | NovoColor® IP is a broadly compatibile, in-plant colorant for waterborne decorative and industrial coating applications. Non-VOC and formulated without APEO or ethylene and propylene glycols. | |
| NovoColor® SF | CCA | NovoColor® SF waterborne dispersions are designed for in-plant tinting of coatings and stains where a high degree of color transparency is desired. Composed of high quality, lightfast pigments, it offers excellent color stability and uniformity. These col...展开 NovoColor® SF waterborne dispersions are designed for in-plant tinting of coatings and stains where a high degree of color transparency is desired. Composed of high quality, lightfast pigments, it offers excellent color stability and uniformity. These colorants are controlled to very stringent color and opacity standards, and give the user batch to batch appearance uniformity. 收起 | |
| OptiColor® XP | CCA | OptiColor® XP are high performance, industrial colorants for point of sales and in-plant solventborne coating systems. | |
| R-1200 | ANHUI DONGHUI INTERNATIONAL | R-1200 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥98.2%. This product has a specific gravity of 4.0 g/cm3, an oil absorption of ≤14.5g/100g, and a pH of 7.0 to 8.0. It is commonly used in base paints and road mark paints. | |
| R-1201 | ANHUI DONGHUI INTERNATIONAL | R-1201 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92%. This product offers exceptional whiteness, good dispersibility, and high weatherability in paint and printing ink applications. It has a specific gravity of 4.0 g/cm3, an...展开 R-1201 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92%. This product offers exceptional whiteness, good dispersibility, and high weatherability in paint and printing ink applications. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤17g/100g, and a pH of 6.5 to 8.0. 收起 | |
| R-1202 | ANHUI DONGHUI INTERNATIONAL | R-1202 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers covering power, exceptional whiteness, high gloss, good dispersibility, and high weatherability in printing inks. It has a specific gravity of 4.0 g/c...展开 R-1202 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers covering power, exceptional whiteness, high gloss, good dispersibility, and high weatherability in printing inks. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤19g/100g, and a pH of 6.5 to 8.0. 收起 | |
| R-1203 | ANHUI DONGHUI INTERNATIONAL | R-1203 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers exceptional whiteness, good dispersibility, high gloss, and super covering power in wall paints, industrial paints, road mark paints, wall-paper coati...展开 R-1203 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers exceptional whiteness, good dispersibility, high gloss, and super covering power in wall paints, industrial paints, road mark paints, wall-paper coatings, and solvent-based coatings. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤20g/100g, and a pH of 6.5 to 8.0. 收起 | |
| R-215 | ANHUI DONGHUI INTERNATIONAL | R-215 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92.5%. This product offers exceptional whiteness and super covering power in solvent-based coatings, latex paints for indoor and outdoor walls, and printing inks. It has a spec...展开 R-215 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92.5%. This product offers exceptional whiteness and super covering power in solvent-based coatings, latex paints for indoor and outdoor walls, and printing inks. It has a specific gravity of 3.9 g/cm3, an oil absorption of ≤21g/100g, and a pH of 6.0 to 8.5. 收起 | |
| R-216 | ANHUI DONGHUI INTERNATIONAL | R-216 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93.5%. This product offers exceptional whiteness, high gloss, and high weatherability in wall paints, industrial paints, and surface printing inks. It has a specific gravity of...展开 R-216 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93.5%. This product offers exceptional whiteness, high gloss, and high weatherability in wall paints, industrial paints, and surface printing inks. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤20g/100g, and a pH of 6.5 to 8.0. 收起 | |
| R-219 | ANHUI DONGHUI INTERNATIONAL | R-219 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥90%. This product offers exceptional whiteness, high gloss, super covering powder, good dispersibility, and high weatherability in printing ink applications. It has a specific ...展开 R-219 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥90%. This product offers exceptional whiteness, high gloss, super covering powder, good dispersibility, and high weatherability in printing ink applications. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤21g/100g, and a pH of 6.0 to 9.0. 收起 | |
| SCHWEGO ® Pur 8051 | Bernd Schwegmann GmbH & Co. KG | Schwego® Pur 8051是一种非离子型增稠剂，能有效改善水性涂料和清漆的流变性能。同时，Schwego®Pur 8051也可以与其它增稠剂配合使用而达到某种特别的效果。这种特别效果也取决于基料的种类。 | |
| SCHWEGO® Antimec | Bernd Schwegmann GmbH & Co. KG | Schwego® Antimec可用于几乎所有常规油漆体系，水性和溶剂型。而防结皮效果只对长油度醇酸树脂体系有效 | |
| SCHWEGO® corrit | Bernd Schwegmann GmbH & Co. KG | Schwego® Corrit主要作为一种锈转化助剂应用于水性油漆。典型应用：防锈底漆、单层防腐蚀体系、修补面漆 | |
| SCHWEGO® Everlast | Bernd Schwegmann GmbH & Co. KG | 基于螯合物的铁锈净化系统。轻微浆状的液体，可与中和的铁锈层形成金属有机离子复合物。该逐步形成的、黑色的、非常小巧的保护层可提供长期腐蚀耐久性，由于它含有成膜助剂，同时也是一个完美的底漆 | |
| SCHWEGO® Flow 8057 | Bernd Schwegmann GmbH & Co. KG | Schwego® Flow 8057可用于几乎所有水稀释涂料体系。不存在不相容性问题。 | |
| SCHWEGO® Flow 8058 | Bernd Schwegmann GmbH & Co. KG | Schwego® Flow 8058可用于几乎所有水稀释涂料体系。不存在不相容性问题。Schwego® Flow 8058仅含有水一种挥发性组分，使其特别适合用于无溶剂水稀释体系 | |
| SCHWEGO® Flow 8060 | Bernd Schwegmann GmbH & Co. KG | Schwego® Flow 8060可用于常规含溶剂或无溶剂涂料体系。一般来说，Schwego® Flow 8060对所有基料体系均有效，但它不适合用于水性涂料材料 | |
| SCHWEGO® Fluor 6523 | Bernd Schwegmann GmbH & Co. KG | 高效润湿助剂，用于溶剂型和水性涂料体系，可生物降解，不含PFOS和PFOA，基于C4技术 | |
| SCHWEGO® Fluor 6536 | Bernd Schwegmann GmbH & Co. KG | 高效润湿助剂，用于溶剂型和水性涂料体系，不含PFOS和PFOA，基于环保型C4、C6技术 | |
| SCHWEGO® Fluor 6543 | Bernd Schwegmann GmbH & Co. KG | 高效润湿助剂，用于溶剂型和水性涂料体系，不含PFOS和PFOA，基于环保型C4、C6技术 | |
| SCHWEGO® Foam 6303 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6303可用于含溶剂和水稀释体系。在含溶剂体系中，Schwego® Foam 6303作为消泡脱气剂尤为有效，也可部分作为流平剂。适合以下基料：醇酸、醇酸/聚酯、不饱和聚酯、NC-、AC-、PU和聚丙烯酸体系 |
