| Saccharin | Bornnet Corporation Company Ltd | Saccharin is a synthetic sweetener that is 300 to 400 times sweeter than sucrose. It has a bitter after taste and is non-hygroscopic. Saccharin is used in low-calorie foods such as jam, beverages, and desserts. | |
| Salt | Bornnet Corporation Company Ltd | Salt is a mineral substance composed primarily of sodium chloride. It is used as a carrier for dry or sedimentary ingredients or as an ingredient in a wide variety of foods and beverages. | |
| SILBIONE CAF 72576 RED | Elkem Silicones | SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 a...展開 SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE CAF 72589 | Elkem Silicones | SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxan...展開 SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 70004 | Elkem Silicones | SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based ...展開 SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 71500 GRY | Elkem Silicones | SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS ...展開 SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71528 | Elkem Silicones | SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展開 SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71550 | Elkem Silicones | SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展開 SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE FLD 70047V100 | Elkem Silicones | SILBIONE FLD 70047 V 100, V 200 and V 350 are linear POLYDIMETHYLSILOXANES. | |
| SILBIONE FLD 70047V12 500 | Elkem Silicones | SILBIONE FLD 70047 V 12 500 to V 300 000 are linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE FLD 70047V30 000 | Elkem Silicones | SILBIONE FLD 70047V30 000 is a linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE FLD 70047V300 000 | Elkem Silicones | SILBIONE FLD 70047V300 000 is a linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE PASTE 70428 | Elkem Silicones | SILBIONE PASTE 70428 is a mixture of polydimethylsiloxane oil and inert filler. This paste is recommended for lubricating installations and equipment to process or package foodstuffs. It can therefore, occasionally, be in contact with foodstuffs. The comp...展開 SILBIONE PASTE 70428 is a mixture of polydimethylsiloxane oil and inert filler. This paste is recommended for lubricating installations and equipment to process or package foodstuffs. It can therefore, occasionally, be in contact with foodstuffs. The composition of SILBIONE Paste 70428 meets the regulations in force in the following countries: FRANCE : Brochure n° 1 227 of the Journal Officiel de la République Française. For aqueous contact only. Tolerated provided the user checks that the paste does not penetrate into the foodstuffs and that if the machinery overheats it does not release any substances which might affect the foodstuff. NB: BLUESTAR SILICONES has checked, by heating SILBIONE Paste 70428 at 150°C for 24 hours, that the product does not release any toxic substances. Circular of 26 Mai 1971 on materials in contact with foodstuffs. GERMANY: Bundesgesundheitsamt Recommendations BGA chapter XV A on « Silicones ». Tolerated provided the user checks that the product does not affect either the odour or the taste of foodstuffs with which it might be in contact. USA: FDA Regulations under paragraph 178 3570 of the Code of Federal Regulations, part 21, on « Lubricants with incidental food contact ». For other countries, please consult us. 收起 | |
| SILBIONE PRIM 70073 | Elkem Silicones | SILBIONE PRIMER 70073 is an adhesion promoter for SILBIONE CAF and SILBIONE CAF DISPERSIONS (one component room temperature curing silicone elastomers). | |
| SILBIONE RES 76405 | Elkem Silicones | SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints develo...展開 SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints developed to protect and decorate these materials. The products obtained after crosslinking of SILBIONE RESINE 76405 contain only substances permitted by the Food Contact regulations currently in force. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coatings obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILCOLAPSE 7140 | Elkem Silicones | SILCOLAPSE 7140 is a non-ionic aqueous emulsion containing dimethylpoly- siloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 7140 has many applications in food industry. It can also be used in ind...展開 SILCOLAPSE 7140 is a non-ionic aqueous emulsion containing dimethylpoly- siloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 7140 has many applications in food industry. It can also be used in industrial applications requiring a high level of purity. 收起 | |
| SILCOLEASE ADD 702 | Elkem Silicones | SILCOLEASE ADD 702 is a white, granular powder, freely soluble in water and possessing a slight odour of ammonia. It is used with emulsion SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE EMUL RCA 954 | Elkem Silicones | SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised r...展開 SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised release liner. This RCA emulsion is used as a RCA in polyaddition type emulsions in the SILCOLEASE range. 收起 | |
| SILCOLEASE EMULSION 902 | Elkem Silicones | SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. ...展開 SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 907 | Elkem Silicones | SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence o...展開 SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence of suitable emulsions of crosslinker and an organometallic catalyst, for example (e.g. SILCOLEASE EMULSION XL 969 and SILCOLEASE EMULSION CATA 903) to give an ELASTOMERIC type coating. It may be used to coat substrates that meet “food contact application” requirements. 收起 | |
| SILCOLEASE EMULSION 908 | Elkem Silicones | SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展開 SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 912 | Elkem Silicones | SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展開 SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 913 producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 915 | Elkem Silicones | SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. ...展開 SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 925 | Elkem Silicones | SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYS...展開 SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION CATA 903 | Elkem Silicones | SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substr...展開 SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substrates, for example SILCOLEASE EMULSION 908. It is recommended uniquely for the catalysis of polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION CATA 909 | Elkem Silicones | SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory releas...展開 SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory release coating for flexible substrates such as papers and films. 收起 | |
| SILCOLEASE EMULSION CATA 911 | Elkem Silicones | SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates...展開 SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates, for example SILCOLEASE EMULSION 915. It only catalyses polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION XL 966 | Elkem Silicones | SILCOLEASE EMULSION CROSSLINKER 966 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 968 | Elkem Silicones | SILCOLEASE EMULSION XL 968 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 969 | Elkem Silicones | SILCOLEASE EMULSION XL 969 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE HA 1 | Elkem Silicones | SILCOLEASE HA-1 is a water-based additive. It is used with emulsion. SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE PC-105NXL | Elkem Silicones | SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an e...展開 SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an emulsion of a low vinyl content silicone fluid but without the methyl hydrogen siloxane crosslinker pre-added. As such, SILCOLEASE PC-105NXL offers the flexibility to the formulator of being able to modify the type or the amount of crosslinker to achieve special performance characteristics. A platinum catalyst emulsion is also required. Release modifier emulsions are available which, when blended with SILCOLEASE PC-105NXL in incrementally higher levels, will give correspondingly tighter release force performance. A platinum catalyst emulsion is also required. 收起 | |
| SILCOLEASE PC-107 | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展開 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-107 NXL | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展開 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188 | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展開 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ® PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ® PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ® PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188NXL | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展開 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ®PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ®PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ®PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-191 | Elkem Silicones | SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proporti...展開 SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the level of SILCOLEASE PC-191 is increased in the formulation. Unlike traditional tight release additives which are based on vinyl functional siloxane resins, SILCOLEASE PC-191 is based on hydride functionality. As a result, SILCOLEASE PC-191 may offer greater efficiency in affecting release response than the vinyl functional counterparts. 收起 | |
| SILCOLEASE PC-195NXL | Elkem Silicones | SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values incr...展開 SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values increasing proportionally as the level of SILCOLEASE PC-195NXL is increased. Additionally, when SILCOLEASE PC-195NXL is used at or near 100% of the polymer blend, very high release levels are achievable with both rubber based and acrylic adhesives. 收起 | |
| SILCOLEASE PC-197 | Elkem Silicones | SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing ...展開 SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the amount of SILCOLEASEPC-197 is increased in the formulation. SILCOLEASE PC-197 is based on a vinyl functional siloxane resin. 收起 | |
| SILCOLEASE PC-31 | Elkem Silicones | SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展開 SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-868 | Elkem Silicones | SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copoly...展開 SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-95 | Elkem Silicones | SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promot...展開 SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promotes polymerization through a polyaddition reaction. When properly formulated with a release polymer emulsion, SILCOLEASE PC-95 provides a thermally curable release coating for paper substrates. 收起 | |
| SILCOLEASE XL PC-50 | Elkem Silicones | SILCOLEASE PC-50 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展開 SILCOLEASE PC-50 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| Silicon Dioxide | Bornnet Corporation Company Ltd | Silicon Dioxide is a chemical compound that is a dioxide of silicon with the chemical formula SiO2. It is used as a anti-caking agent, carrier, and dispersant that can absorb 120% of its weight and remain a free flowing substance. It is used in a wide var...展開 Silicon Dioxide is a chemical compound that is a dioxide of silicon with the chemical formula SiO2. It is used as a anti-caking agent, carrier, and dispersant that can absorb 120% of its weight and remain a free flowing substance. It is used in a wide variety of products such as salt, flour, powdered soups, coffee, vanilla powder, baking powder, dried egg yolk, and tortilla chips. 收起 | |
| Sodium Benzoate | Anhui BBCA International Co., Ltd. | Sodium Benzoate appears as a white powder. This product is most commonly used as a preservative in applications such as salad dressings, carbonated drinks, jams and fruit juices. | |
| Sodium Citrate | Anhui BBCA International Co., Ltd. | Sodium Citrate appears as a colorless crystal that is odorless with a slightly acidic taste. This product is used as a flavor enhancer in dairy products and carbonated drinks. | |
| Sodium Citrate | Dongting Citric Acid Chemicals Co., Ltd. | Sodium Citrate is the sodium salt of citric acid. This product appears as a white crystal or crystalline powder with an odorless, sour flavor, and it is highly soluble in water and insoluble in alcohol. It is used as a food additive in order to make food ...展開 Sodium Citrate is the sodium salt of citric acid. This product appears as a white crystal or crystalline powder with an odorless, sour flavor, and it is highly soluble in water and insoluble in alcohol. It is used as a food additive in order to make food products taste sour, and is often used in soft drinks, cheese, jams, ice creams, candy, condensed milk, etc. 收起 | |
| Sodium Metabisulphite | Anhui BBCA International Co., Ltd. | Sodium Metabisulphite is an inorganic compound composed of sodium, sulfur and oxygen. It typically comes in a white, or yellowish-white crystalline powder. This product is commonly used as a food preservative for dried foods, like potato chips, raisins an...展開 Sodium Metabisulphite is an inorganic compound composed of sodium, sulfur and oxygen. It typically comes in a white, or yellowish-white crystalline powder. This product is commonly used as a food preservative for dried foods, like potato chips, raisins and apples, as well as fruit concentrate juices. 收起 | |
| Sodium Sulphate Anhydrous Food Grade | Anhui BBCA International Co., Ltd. | Sodium Sulphate Anhydrous Food Grade appears as a white, crystal powder. This product is used as an acidity regulator in the food industry, and it can be used in caramel production. | |
| Sorbitol | Bornnet Corporation Company Ltd | Sorbitol is a crystalline powder produced by the hydrogenation of glucose. It is low in calories while still maintaining about 60% the sweetness of sugar. Sorbital is used in confectionery, candy, shredded coconut, frozen desserts, and low-calorie beverag...展開 Sorbitol is a crystalline powder produced by the hydrogenation of glucose. It is low in calories while still maintaining about 60% the sweetness of sugar. Sorbital is used in confectionery, candy, shredded coconut, frozen desserts, and low-calorie beverages. 收起 | |
| Sour Cherries in Jelly | PRPH KANDY | Sour Cherries in Jelly has a fruity taste characteristic to cherries and a dark red color. This product contains sour cherries 60%, sugar, aronia juice, water, modified starch E1422, thickening agent: E407, acidity regulator: citric acid E300, aroma, col...展開 Sour Cherries in Jelly has a fruity taste characteristic to cherries and a dark red color. This product contains sour cherries 60%, sugar, aronia juice, water, modified starch E1422, thickening agent: E407, acidity regulator: citric acid E300, aroma, colour: carmine E120 and the preservatives: E202, E211. Sour Cherries in Jelly has a PH of 3,2 +/- 0,2. This product should be stored at a temperature of 5 to 20°C and used within 3 months of production. 收起 | |
| Sour Cherry Flavoured Filling-Thermostable | PRPH KANDY | Sour Cherry Flavoured Filling-Thermostable is used in the confectionery industry for a wide variety of cooking and baking applications. This product contains sugar, water, apple purre, sour cherry juice 6%, glucose-fructose syrup, modified starch 1442, t...展開 Sour Cherry Flavoured Filling-Thermostable is used in the confectionery industry for a wide variety of cooking and baking applications. This product contains sugar, water, apple purre, sour cherry juice 6%, glucose-fructose syrup, modified starch 1442, thickening agents (E466, E 460), acidity regulator: E330, aroma, colour: E120 and the preservative E202. Sour Cherry Flavoured Filling-Thermostable has a PH of 3,4 +/- 0,2. This product should be stored at a temperature of 5 to 18°C and used within 6 months of production. Sour Cherry Flavoured Filling-Thermostable contains no GMO ingredients. 收起 | |
| Sour Cherry Flavoured Gel | PRPH KANDY | Sour Cherry Flavoured Gel contains glucose-fructose syrup, sugar, aronia juice, sour cherry juice 1%, water, gelling agent: pectin E440, acidity regulator: E330 and E331, aroma, colour: carmine E120 and the preservative E202. This product has a PH of...展開 Sour Cherry Flavoured Gel contains glucose-fructose syrup, sugar, aronia juice, sour cherry juice 1%, water, gelling agent: pectin E440, acidity regulator: E330 and E331, aroma, colour: carmine E120 and the preservative E202. This product has a PH of 4,5 +/- 0,2. Sour Cherry Flavoured Gel should be stored at a temperature of 5 to 25°C and used within 6 months of production. 收起 | |
| Sour Cherry Gel (Cold Dosage) | PRPH KANDY | Sour Cherry Gel (Cold Dosage) is used in the confectionery and bakery industries for a wide range of baking and cooking applications. This product contains glucose-fructose syrup, sugar, water, sour cherry concentrate(6:1) 5%, gelling agent: E 440(i), a...展開 Sour Cherry Gel (Cold Dosage) is used in the confectionery and bakery industries for a wide range of baking and cooking applications. This product contains glucose-fructose syrup, sugar, water, sour cherry concentrate(6:1) 5%, gelling agent: E 440(i), acidity regulators: E 330, E 331, aroma, colour E 120 and the preservative: E202. Sour Cherry Gel (Cold Dosage) has a PH of 4,4 +/- 0,2. This product should be stored at a temperature of 0 to 25°C and used within 6 months of production. Sour Cherry Gel (Cold Dosage) does not contain GMO ingredients. 收起 | |
| Sour Cherry Preparation | PRPH KANDY | Sour Cherry Preparation is used in the milk industry. This product contains sugar, sour cherries 45%, water, modified starch E 1422, thickening agent pectin E440 E, acidity modulators: citric acid E 330, sodium citrate E 331, aroma and colour E 120. Sou...展開 Sour Cherry Preparation is used in the milk industry. This product contains sugar, sour cherries 45%, water, modified starch E 1422, thickening agent pectin E440 E, acidity modulators: citric acid E 330, sodium citrate E 331, aroma and colour E 120. Sour cherry Preparation code: 7002 has a PH of 3,8 +/- 0,2. This product should be stored at a temperature of 5 to 18°C and used within 8 weeks of production. Sour Cherry Preparation does not contain any GMO ingredients. 收起 | |
| Sour Cherry Topping 20% | PRPH KANDY | Sour Cherry Topping has a fruity smell and taste characteristic of sour cherries and has a dark red color. This product contains sugar, sour cherry juice 20%, glucose-fructose sirup, aronia juice, water, modified starch E1422, thickening agent: xanthan ...展開 Sour Cherry Topping has a fruity smell and taste characteristic of sour cherries and has a dark red color. This product contains sugar, sour cherry juice 20%, glucose-fructose sirup, aronia juice, water, modified starch E1422, thickening agent: xanthan gum E415, acidity regulator: citric acid E300, aroma, colour: carmine E120 and the preservative E202. Sour Cherry Topping has a PH of 3,0 +/- 0,2. This product should be stored at a temperature of 5 to 15°C and should be used within 3 months of production. Sour Cherry Topping does not contain any GMO ingredients. 收起 | |
| Sour Cherry Topping 25% | PRPH KANDY | Sour Cherry Topping has a fruity smell and taste characteristic of sour cherries and is dark red in color. This product contains Sugar, sour cherries 25%, glucose-fructose sirup, aronia juice, water, modified starch E1422, thickening agent: xanthan gum E...展開 Sour Cherry Topping has a fruity smell and taste characteristic of sour cherries and is dark red in color. This product contains Sugar, sour cherries 25%, glucose-fructose sirup, aronia juice, water, modified starch E1422, thickening agent: xanthan gum E415, acidity regulator: citric acid E300, aroma,colour: carmine E120 and the preservative E202. Sour Cherry Topping code:9001 has a PH of 3,0 +/- 0,2. This product should be stored at a temperature of 5 to 15°C and used within 3 months of production. Sour Cherry Topping does not contain any GMO ingredients. 收起 | |
| Sta-Fresh 360HS | Bornnet Corporation Company Ltd | Sta-Fresh 360HS is a high gloss wax protective coating for fresh citrus fruit. It is custom formulated to give a highly attractive and durable shine to the fruit surface while reducing moisture loss, which preserves the freshness of the fruit. Sta-Fresh 3...展開 Sta-Fresh 360HS is a high gloss wax protective coating for fresh citrus fruit. It is custom formulated to give a highly attractive and durable shine to the fruit surface while reducing moisture loss, which preserves the freshness of the fruit. Sta-Fresh 360HS is commonly used on grapefruit, oranges, tangerines, lemons, and various other citrus fruits. 收起 | |
| Sta-Fresh 7055 | Bornnet Corporation Company Ltd | Sta-Fresh 7055 is a wax coating designed to control internal browning and improve shell appearance. It is specifically designed to maintain the freshness of the fruit during the market period. Sta-Fresh 7055 is used specifically on pineapples. | |
| Strawberry Flavoured Filling-Thermostable | PRPH KANDY | Strawberry Flavoured Filling-Thermostable is used in the confectionery industry for a wide variety of baking and cooking applications. This product contains sugar, water, apple purre, strawberry juice 9%, glucose-fructose syrup, modified starch 1442, th...展開 Strawberry Flavoured Filling-Thermostable is used in the confectionery industry for a wide variety of baking and cooking applications. This product contains sugar, water, apple purre, strawberry juice 9%, glucose-fructose syrup, modified starch 1442, thickening agents (E466, E 460), acidity regulator: E330, aroma, colours: E120 and E160a and the preservative E202. Strawberry Flavoured Filling-Thermostable has a PH of 3,4 +/- 0,2. This product should be stored at a temperature of 5 to 18°C and used within 6 months of production. 收起 | |
| Strawberry Flavoured Gel | PRPH KANDY | Strawberry Flavoured Gel contains glucose-fructose syrup, sugar, strawberry juice 1%, water, gelling agent: pectin E440, acidity regulator: E330 and E331, aroma, colours: E120 and E160a and the preservative E202. This product has a PH of 4,5 +/- 0,2....展開 Strawberry Flavoured Gel contains glucose-fructose syrup, sugar, strawberry juice 1%, water, gelling agent: pectin E440, acidity regulator: E330 and E331, aroma, colours: E120 and E160a and the preservative E202. This product has a PH of 4,5 +/- 0,2. Strawberry Flavoured Gel should be stored at a temperature of 5 to 25°C and used within 6 months of production. This product contains no GMO ingredients. 收起 | |
| Strawberry Preparation | PRPH KANDY | Strawberry Preparation is used in the milk industry. This product contains sugar, strawberries 35%, glucose-fructose syrup, water, modified starch E 1422, thickening agents: karagene E 407, xanthan gum E 415, acidity modulators: citric acid E 330, sodium...展開 Strawberry Preparation is used in the milk industry. This product contains sugar, strawberries 35%, glucose-fructose syrup, water, modified starch E 1422, thickening agents: karagene E 407, xanthan gum E 415, acidity modulators: citric acid E 330, sodium citrate E 331, aroma and colour E 120. Strawberry Preparation has a PH of 3,8 +/- 0,2. This product should be stored at a temperature of 5 to 18°C and used within 8 weeks of production. Strawberry Preparation does not contain any GMO ingredients. 收起 | |
| Strawberry Preparation | PRPH KANDY | Strawberry Preparation is used in the milk industry. This product contains sugar, glucose-fructose syrup, strawberries 10%, water, modified starch E 1422, thickening agents: pectin E440, xanthan gum E 415, acidity modulators: citric acid E 330, sodium ci...展開 Strawberry Preparation is used in the milk industry. This product contains sugar, glucose-fructose syrup, strawberries 10%, water, modified starch E 1422, thickening agents: pectin E440, xanthan gum E 415, acidity modulators: citric acid E 330, sodium citrate E 331, aroma and colour E 120. Strawberry Preparation has a PH of 3,8 +/- 0,2. This product should be stored at a temperature of 5 to 18°C and used within 8 weeks of production. Strawberry Preparation does not contain any GMO ingredients. 收起 | |
| Strawberry Preparation Mix | PRPH KANDY | Strawberry Preparation Mix is used in the milk industry. This product contains sugar, strawberry purre 35%, water, modified starch E 1422, acidity modulators: citric acid E 330, sodium citrate E 331, aroma and colour E 120. Strawberry Preparation Mix ha...展開 Strawberry Preparation Mix is used in the milk industry. This product contains sugar, strawberry purre 35%, water, modified starch E 1422, acidity modulators: citric acid E 330, sodium citrate E 331, aroma and colour E 120. Strawberry Preparation Mix has a PH of 3,8 +/- 0,2. This product should be stored at a temperature of 5 to 18°C and used within 8 weeks of production. Strawberry Preparation Mix does not contain any GMO ingredients. 收起 | |
| Strawberry Topping | PRPH KANDY | Strawberry Topping has a fruity smell and taste characteristic of strawberries and a red color. This product sugar, strawberry purre 20%, glucose-fructose sirup, water, modified starch E1422, thickening agent: xanthan gum E415, acidity regulator: citric ...展開 Strawberry Topping has a fruity smell and taste characteristic of strawberries and a red color. This product sugar, strawberry purre 20%, glucose-fructose sirup, water, modified starch E1422, thickening agent: xanthan gum E415, acidity regulator: citric acid E300, aroma,colour: carmine E120 and the preservative E202. Strawberry Topping has a PH of 3,0 +/- 0,2. This product should be stored at a temperature of 5 to 15°C and used within 3 months of production. Strawberry Topping does not contain any GMO ingredients. 收起 | |
| Tapioca Starch | Bornnet Corporation Company Ltd | Tapioca Starch it is a modified pearl or granulated form of starch which has been treated to be less stringy. It is used in puddings and pie fillings. | |
| Tetrasodium Pyrophosphate | Bornnet Corporation Company Ltd | Tetrasodium Pyrophosphate is a crystalline chemical compound with the formula Na4P2O7 It acts as a coagulant in instant pudding and in cheese it reduces the meltability and fat separation. Tetrasodium Pyrophosphate is used in dairy products, pudding, tuna...展開 Tetrasodium Pyrophosphate is a crystalline chemical compound with the formula Na4P2O7 It acts as a coagulant in instant pudding and in cheese it reduces the meltability and fat separation. Tetrasodium Pyrophosphate is used in dairy products, pudding, tuna fish, malted milk and chocolate drink powders. 收起 | |
| Vanilla Flavoured Preparation | PRPH KANDY | Vanilla Flavoured Preparation is used in the milk industry. This product contains glucose-fructose syrup, sugar, water, modified starch E 1422, thickening agents: guar gum E412, acidity modulators: citric acid E 330, sodium citrate E 331, aroma and col...展開 Vanilla Flavoured Preparation is used in the milk industry. This product contains glucose-fructose syrup, sugar, water, modified starch E 1422, thickening agents: guar gum E412, acidity modulators: citric acid E 330, sodium citrate E 331, aroma and colour E 160a. Vanilla Flavoured Preparation has a PH of 3,8 +/- 0,2. This product should be stored at a temperature of 5 to 18°C and used within 8 weeks of production. Vanilla Flavoured Preparation does not contain any GMO ingredients. 收起 | |
| Vanilla–Thermostable Filling | PRPH KANDY | Vanilla–Thermostable Filling contains water, sugar, glucose-fructose syrup, modified starch, palm fat, thickeners (carboxyl-cellulose(E466), cellulose (E 460)), acidity regulator (citric acid (E330)), flavour, colours (titanum dioxide (E471), carotenes (E...展開 Vanilla–Thermostable Filling contains water, sugar, glucose-fructose syrup, modified starch, palm fat, thickeners (carboxyl-cellulose(E466), cellulose (E 460)), acidity regulator (citric acid (E330)), flavour, colours (titanum dioxide (E471), carotenes (E160a),salt, and preservative (potassium sorbate (E202)). This product is used in a wide variety of cooking and baking applications for flavoring. Vanilla–Thermostable Filling has a PH of 4,5 +/- 0,2. It should be stored at a temperature of 5 to 18°C. This product does not contain any GMO ingredients. 收起 | |
| VC Coated Vitamin C | Anhui BBCA International Co., Ltd. | VC Coated Vitamin C is used in food products to add nutrition. This product has good condensability, so can be made into smaller and higher content ascorbic tablet with adding less shaping agents. | |
| Vitamin C | Anhui BBCA International Co., Ltd. | Vitamin C appears as white crystals in a crystalline powder. This product is used as an antioxidant and to help boost the immune system. It has a melting point around 190ºC and a specific rotation of +20.5 º - +21.5 º. It can be used as a nutritional supp...展開 Vitamin C appears as white crystals in a crystalline powder. This product is used as an antioxidant and to help boost the immune system. It has a melting point around 190ºC and a specific rotation of +20.5 º - +21.5 º. It can be used as a nutritional supplement or in drink mixes. 收起 | |
| Vitamin E | Anhui BBCA International Co., Ltd. | Vitamin E appears as an off-white, free flowing powder. This product is used to add nutrition to foods and as a dietary supplement. | |
| Vitamin H | Anhui BBCA International Co., Ltd. | Vitamin H appears as a white crystalline powder. This product is used as a dietary supplement to assist in the krebs cycle, through which the body converts food into energy and in the transfer of carbon dioxide within the body. | |
| Xanthan Gum | Bornnet Corporation Company Ltd | Xanthan Gum is produced by microbial fermentation from the Xanthomonas campestris organism. It is used in salad dressings, sauces, desserts, baked goods, and beverages. | |
| Xylitol | Anhui BBCA International Co., Ltd. | Xylitol appears as white crystals and can be used as a sugar substitute or artificial sweetener. This product is a common additive for chewing gum and hard candy. |
