| Aluminium Ammonium Sulphate FCC | Canton Chem, Inc. | Aluminium Ammonium Sulphate FCC appears as a colorless crystalline to white colored granules or powder. This product has a molecular weight of 453.33, an assay of 99.5 - 100.5%, and is denoted by the CAS number 7784-26-1. This product is soluble in water,...展開 Aluminium Ammonium Sulphate FCC appears as a colorless crystalline to white colored granules or powder. This product has a molecular weight of 453.33, an assay of 99.5 - 100.5%, and is denoted by the CAS number 7784-26-1. This product is soluble in water, insoluble in alcohol, and is freely, but slowly, soluble in glycerin. Aluminium Ammonium Sulphate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Aluminium Potassium Sulphate FCC | Canton Chem, Inc. | Aluminium Potassium Sulphate FCC appears as large, transparent crystals or crystalline fragments. This product has a molecular weight of 474.38, an assay of 99.5 - 100.5%, and is denoted by the CAS number 7784-24-9. This product is soluble in water, and ...展開 Aluminium Potassium Sulphate FCC appears as large, transparent crystals or crystalline fragments. This product has a molecular weight of 474.38, an assay of 99.5 - 100.5%, and is denoted by the CAS number 7784-24-9. This product is soluble in water, and insoluble in alcohol. Aluminium Potassium Sulphate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Aluminium Sulphate FCC | Canton Chem, Inc. | Aluminium Sulphate FCC appears as a white colored powder, shining plates, or crystalline fragments. This product has a molecular weight of 342.10, an assay of 99.5 - 101.7%, and is denoted by the CAS number 17927-65-0. This product is soluble in water. Al...展開 Aluminium Sulphate FCC appears as a white colored powder, shining plates, or crystalline fragments. This product has a molecular weight of 342.10, an assay of 99.5 - 101.7%, and is denoted by the CAS number 17927-65-0. This product is soluble in water. Aluminium Sulphate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Ammonium Bicarbonate FCC | Canton Chem, Inc. | Ammonium Bicarbonate FCC appears as a white crystal or crystalline powder. This product has a molecular weight of 79.06, an assay of 99.0 - 100.5%, and is denoted by the CAS number 1066-33-7. This product is soluble in water, and insoluble in alcohol. Amm...展開 Ammonium Bicarbonate FCC appears as a white crystal or crystalline powder. This product has a molecular weight of 79.06, an assay of 99.0 - 100.5%, and is denoted by the CAS number 1066-33-7. This product is soluble in water, and insoluble in alcohol. Ammonium Bicarbonate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Ammonium Carbonate FCC | Canton Chem, Inc. | Ammonium Carbonate FCC appears as a white powder, or as a hard, white or translucent mass. This product has a molecular weight of 175.14, an assay of 30.0 - 34.0%, and is denoted by the CAS number 506-87-6. This product is freely soluble in water. Ammoniu...展開 Ammonium Carbonate FCC appears as a white powder, or as a hard, white or translucent mass. This product has a molecular weight of 175.14, an assay of 30.0 - 34.0%, and is denoted by the CAS number 506-87-6. This product is freely soluble in water. Ammonium Carbonate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Ammonium Chloride FCC | Canton Chem, Inc. | Ammonium Chloride FCC appears as a colorless crystalline to white colored crystalline powder. This product has a molecular weight of 53.49, an assay of 99.0% minimum, and is denoted by the CAS number 12125-02-9. This product is soluble in water. Ammonium ...展開 Ammonium Chloride FCC appears as a colorless crystalline to white colored crystalline powder. This product has a molecular weight of 53.49, an assay of 99.0% minimum, and is denoted by the CAS number 12125-02-9. This product is soluble in water. Ammonium Chloride FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Ammonium Phosphate Dibasic FCC | Canton Chem, Inc. | Ammonium Phosphate Dibasic FCC appears as white colored crystals, crystalline powder, or granules. This product has a molecular weight of 132.06, an assay of 96.0 - 102.0%, and is denoted by the CAS number 7783-28-0. This product is freely soluble in wate...展開 Ammonium Phosphate Dibasic FCC appears as white colored crystals, crystalline powder, or granules. This product has a molecular weight of 132.06, an assay of 96.0 - 102.0%, and is denoted by the CAS number 7783-28-0. This product is freely soluble in water. Ammonium Phosphate Dibasic FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Ammonium Phosphate Monobasic FCC | Canton Chem, Inc. | Ammonium Phosphate Monobasic FCC appears as white colored crystals, crystalline powder, or granules. This product has a molecular weight of 115.03, an assay of 96.0 - 102.0%, and is denoted by the CAS number 7722-76-1. This product is soluble in water. Am...展開 Ammonium Phosphate Monobasic FCC appears as white colored crystals, crystalline powder, or granules. This product has a molecular weight of 115.03, an assay of 96.0 - 102.0%, and is denoted by the CAS number 7722-76-1. This product is soluble in water. Ammonium Phosphate Monobasic FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Ammonium Sulphate FCC | Canton Chem, Inc. | Ammonium Sulphate FCC appears as a colorless to white colored crystals or granules. This product has a molecular weight of 132.14, an assay of 99.0 - 100.5%, and is denoted by the CAS number 7783-20-2. This product is freely soluble in water, and insolubl...展開 Ammonium Sulphate FCC appears as a colorless to white colored crystals or granules. This product has a molecular weight of 132.14, an assay of 99.0 - 100.5%, and is denoted by the CAS number 7783-20-2. This product is freely soluble in water, and insoluble in alcohol. Ammonium Sulphate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Barley SE MB (#3300408131) | Frutarom Industries Ltd. | Barley SE MB (PC #3300408131) is a brown to dark brown viscous material with a characteristic aromatic odor and flavor. This product is suitable for Kosher. | |
| Benzoic Acid FCC | Canton Chem, Inc. | Benzoic Acid FCC appears as white colored crystals. This product has a molecular weight of 122.12, an assay of 99.5 - 100.5%, and is denoted by the CAS number 65-85-0. This product is soluble in boiling water, freely soluble in alcohol, chloroform, and et...展開 Benzoic Acid FCC appears as white colored crystals. This product has a molecular weight of 122.12, an assay of 99.5 - 100.5%, and is denoted by the CAS number 65-85-0. This product is soluble in boiling water, freely soluble in alcohol, chloroform, and ether. Benzoic Acid FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| BLUESIL RTV 1556 A | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展開 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 1556 FC B | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展開 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 3428 A | Elkem Silicones | BLUESIL RTV 3428 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. | |
| BLUESIL RTV 3536 P A | Elkem Silicones | BLUESIL RTV 3536 P A&B is a two-component silicone elastomer which cures at room temperature by a polyaddition reaction and leads to a flexible and elastic material. | |
| Calcium Acetate FCC | Canton Chem, Inc. | Calcium Acetate FCC appears as a white colored fine, bulky powder. This product has a molecular weight of 158.17, an assay of 99.0 - 100.5%, and is denoted by the CAS number 62-54-4. This product is freely soluble in water, and slightly soluble in alcohol...展開 Calcium Acetate FCC appears as a white colored fine, bulky powder. This product has a molecular weight of 158.17, an assay of 99.0 - 100.5%, and is denoted by the CAS number 62-54-4. This product is freely soluble in water, and slightly soluble in alcohol. Calcium Acetate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Calcium Carbonate FCC | Canton Chem, Inc. | Calcium Carbonate FCC appears as a colorless to white microcrystalline powder. This product has a molecular weight of 100.09, an assay of 98.0 - 100.5%, and is denoted by the CAS number 471-34-1. This product is practically insoluble in water and alcohol....展開 Calcium Carbonate FCC appears as a colorless to white microcrystalline powder. This product has a molecular weight of 100.09, an assay of 98.0 - 100.5%, and is denoted by the CAS number 471-34-1. This product is practically insoluble in water and alcohol. Calcium Carbonate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Calcium Chloride Anhydrous FCC | Canton Chem, Inc. | Calcium Chloride Anhydrous FCC appears as a deliquescent, white colored granules or powder. This product has a molecular weight of 110.98, an assay of 93.0 - 100.5%, and is denoted by the CAS number 10043-52-4. This product is soluble in water, and slight...展開 Calcium Chloride Anhydrous FCC appears as a deliquescent, white colored granules or powder. This product has a molecular weight of 110.98, an assay of 93.0 - 100.5%, and is denoted by the CAS number 10043-52-4. This product is soluble in water, and slightly soluble in alcohol. Calcium Chloride Anhydrous FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Calcium Chloride Dihydrate FCC | Canton Chem, Inc. | Calcium Chloride Dihydrate FCC appears as white colored granules or powder. This product has a molecular weight of 147.01, an assay of 96.0 - 107.0%, and is denoted by the CAS number 10035-04-8. This product is soluble in water, and slightly soluble in al...展開 Calcium Chloride Dihydrate FCC appears as white colored granules or powder. This product has a molecular weight of 147.01, an assay of 96.0 - 107.0%, and is denoted by the CAS number 10035-04-8. This product is soluble in water, and slightly soluble in alcohol. Calcium Chloride Dihydrate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Calcium Hydroxide FCC | Canton Chem, Inc. | Calcium Hydroxide FCC appears as a white colored powder. This product has a molecular weight of 74.10, an assay of 95.0 - 100.5%, and is denoted by the CAS number 1305-62-0. This product is practically insoluble in water. Calcium Hydroxide FCC is used in ...展開 Calcium Hydroxide FCC appears as a white colored powder. This product has a molecular weight of 74.10, an assay of 95.0 - 100.5%, and is denoted by the CAS number 1305-62-0. This product is practically insoluble in water. Calcium Hydroxide FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Calcium Oxide FCC | Canton Chem, Inc. | Calcium Oxide FCC appears as a white or grey colored powder or granules. This product has a molecular weight of 56.08, an assay of 95.0 - 100.5%, and is denoted by the CAS number 1305-78-8. This product is practically insoluble in water and alcohol, and s...展開 Calcium Oxide FCC appears as a white or grey colored powder or granules. This product has a molecular weight of 56.08, an assay of 95.0 - 100.5%, and is denoted by the CAS number 1305-78-8. This product is practically insoluble in water and alcohol, and soluble in glycerin. Calcium Oxide FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Calcium Phosphate Dibasic FCC | Canton Chem, Inc. | Calcium Phosphate Dibasic FCC appears as a white colored powder. This product has a molecular weight of 172.09, an assay of 97.0 - 105.0%, and is denoted by the CAS number 7789-77-7. This product is practically insoluble in water and alcohol. Calcium Phos...展開 Calcium Phosphate Dibasic FCC appears as a white colored powder. This product has a molecular weight of 172.09, an assay of 97.0 - 105.0%, and is denoted by the CAS number 7789-77-7. This product is practically insoluble in water and alcohol. Calcium Phosphate Dibasic FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Calcium Phosphate Tribasic FCC | Canton Chem, Inc. | Calcium Phosphate Tribasic FCC appears as a white colored powder. This product has a molecular weight of 310.18, an assay of 34.0 - 40.0%, and is denoted by the CAS number 7758-87-4. This product is insoluble in water and alcohol. Calcium Phosphate Tribas...展開 Calcium Phosphate Tribasic FCC appears as a white colored powder. This product has a molecular weight of 310.18, an assay of 34.0 - 40.0%, and is denoted by the CAS number 7758-87-4. This product is insoluble in water and alcohol. Calcium Phosphate Tribasic FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Calcium Sulphate Dihydrate FCC | Canton Chem, Inc. | Calcium Sulphate Dihydrate FCC appears as a white or slightly yellow colored powder. This product has a molecular weight of 172.18, an assay of 98.0% minimum, and is denoted by the CAS number 10101-41-4. This product is slightly soluble in water. Calcium ...展開 Calcium Sulphate Dihydrate FCC appears as a white or slightly yellow colored powder. This product has a molecular weight of 172.18, an assay of 98.0% minimum, and is denoted by the CAS number 10101-41-4. This product is slightly soluble in water. Calcium Sulphate Dihydrate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Calcium Sulphate FCC | Canton Chem, Inc. | Calcium Sulphate FCC appears as a white to slightly yellow colored fine powder. This product has a molecular weight of 136.14, an assay of 99% minimum, and is denoted by the CAS number 7778-18-9. This product is slightly soluble in water. Calcium Sulphate...展開 Calcium Sulphate FCC appears as a white to slightly yellow colored fine powder. This product has a molecular weight of 136.14, an assay of 99% minimum, and is denoted by the CAS number 7778-18-9. This product is slightly soluble in water. Calcium Sulphate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Choline Bitartrate FCC | Canton Chem, Inc. | Choline Bitartrate FCC appears as a white colored crystalline powder. This product has a molecular weight of 453.33, an assay of 98% minimum, and is denoted by the CAS number 62-49-7. This product is freely soluble in water, slightly soluble in alcohol. C...展開 Choline Bitartrate FCC appears as a white colored crystalline powder. This product has a molecular weight of 453.33, an assay of 98% minimum, and is denoted by the CAS number 62-49-7. This product is freely soluble in water, slightly soluble in alcohol. Choline Bitartrate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Citric Acid Anhydrous FCC | Canton Chem, Inc. | Citric Acid Anhydrous FCC appears as colorless to translucent crystals, or as white colored granules or crystalline powder. This product has a molecular weight of 192.13, an assay of 99.5 - 100.5%, and is denoted by the CAS number 77-92-9. This product is...展開 Citric Acid Anhydrous FCC appears as colorless to translucent crystals, or as white colored granules or crystalline powder. This product has a molecular weight of 192.13, an assay of 99.5 - 100.5%, and is denoted by the CAS number 77-92-9. This product is very soluble in water, and soluble in alcohol and ether. Citric Acid Anhydrous FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Citric Acid Monohydrate FCC | Canton Chem, Inc. | Citric Acid Monohydrate FCC appears as colorless to translucent crystals, or as white colored granules or crystalline powder. This product has a molecular weight of 210.14, an assay of 99.5 - 100.5%, and is denoted by the CAS number 5949-29-1. This produc...展開 Citric Acid Monohydrate FCC appears as colorless to translucent crystals, or as white colored granules or crystalline powder. This product has a molecular weight of 210.14, an assay of 99.5 - 100.5%, and is denoted by the CAS number 5949-29-1. This product is very soluble in water, and freely soluble in alcohol. Citric Acid Monohydrate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| EDTA Disodium FCC | Canton Chem, Inc. | EDTA Disodium FCC appears as a white colored crystalline powder. This product has a molecular weight of 372.24, an assay of 99.0 - 101.0%, and is denoted by the CAS number 6381-92-6. This product is soluble in water. EDTA Disodium FCC is used in food and ...展開 EDTA Disodium FCC appears as a white colored crystalline powder. This product has a molecular weight of 372.24, an assay of 99.0 - 101.0%, and is denoted by the CAS number 6381-92-6. This product is soluble in water. EDTA Disodium FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Ferric Pyrophosphate Insoluble FCC | Canton Chem, Inc. | Ferric Pyrophosphate Insoluble FCC appears as a tan to a yellowish white powder. This product has a molecular weight of 745.22, an assay of 24.0 - 26.0%, and is denoted by the CAS number 10058-44-3. This product is insoluble in water, and soluble in miner...展開 Ferric Pyrophosphate Insoluble FCC appears as a tan to a yellowish white powder. This product has a molecular weight of 745.22, an assay of 24.0 - 26.0%, and is denoted by the CAS number 10058-44-3. This product is insoluble in water, and soluble in mineral acids. Ferric Pyrophosphate Insoluble FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Ferrous Sulphate Dried FCC | Canton Chem, Inc. | Ferrous Sulphate Dried FCC appears as a grey-white to buff colored powder. This product has a molecular weight of 151.91, an assay of 86.0 - 89.0%, and is denoted by the CAS number 7720-78-7. This product is slowly soluble in water, and insoluble in alcoh...展開 Ferrous Sulphate Dried FCC appears as a grey-white to buff colored powder. This product has a molecular weight of 151.91, an assay of 86.0 - 89.0%, and is denoted by the CAS number 7720-78-7. This product is slowly soluble in water, and insoluble in alcohol. Ferrous Sulphate Dried FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Ferrous Sulphate Heptahydrate FCC | Canton Chem, Inc. | Ferrous Sulphate Heptahydrate FCC appears as pale, blue to green crystals or granules. This product has a molecular weight of 278.02, an assay of 99.5 - 104.5%, and is denoted by the CAS number 7782-63-0. This product is freely soluble in water, and very ...展開 Ferrous Sulphate Heptahydrate FCC appears as pale, blue to green crystals or granules. This product has a molecular weight of 278.02, an assay of 99.5 - 104.5%, and is denoted by the CAS number 7782-63-0. This product is freely soluble in water, and very soluble in boiling water. Ferrous Sulphate Heptahydrate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Fluid Extract Angelica Root 65-70% ALC. (#3327501501) | Frutarom Industries Ltd. | Fluid extract angelica root 65-70% ALC. (#3327501501) is a fluid extract of angelica root. This product is acquired by an alcoholic extraction of the dried root. It is standardized for its flavor value to food applications. | |
| Fluid Extract Dogwood Bark (#3328539801) | Frutarom Industries Ltd. | Fluid extract dogwood bark, 50-60% Alcohol is a hydro-alcoholic extraction of Piscidia Erythrina, more commonly known in the United States as Jamaica Dogwood. It grows in the West India Islands especially in Jamaica and Martinique, and it has been found i...展開 Fluid extract dogwood bark, 50-60% Alcohol is a hydro-alcoholic extraction of Piscidia Erythrina, more commonly known in the United States as Jamaica Dogwood. It grows in the West India Islands especially in Jamaica and Martinique, and it has been found in Florida, Texas, Southern Mexico, and the Northern Regions of South America. Dogwood Bark is imported and the extract manufactured by Meer Corporation at its North Bergen , New Jersey facilities. 收起 | |
| Ginger Extract WONF (#3329545601) | Frutarom Industries Ltd. | Ginger extract WONF (#3329545601) is a fluid extract ginger that is a hydro-alcoholic extract of natural botanicals. | |
| Magnesium Carbonate FCC | Canton Chem, Inc. | Magnesium Carbonate FCC appears as a white colored powder. This product has a molecular weight of 485.65, an assay of 40.0 - 43.5%, and is denoted by the CAS number 39409-82-0. This product is practically insoluble in water and alcohol, and soluble in dil...展開 Magnesium Carbonate FCC appears as a white colored powder. This product has a molecular weight of 485.65, an assay of 40.0 - 43.5%, and is denoted by the CAS number 39409-82-0. This product is practically insoluble in water and alcohol, and soluble in diluteds. Magnesium Carbonate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Magnesium Chloride 6H2O FCC | Canton Chem, Inc. | Magnesium Chloride 6H2O FCC appears as a deliquescent, white colored crystalline powder. This product has a molecular weight of 203.30, an assay of 99.0 - 105.0%, and is denoted by the CAS number 7791-18-6. This product is very soluble in water, and freel...展開 Magnesium Chloride 6H2O FCC appears as a deliquescent, white colored crystalline powder. This product has a molecular weight of 203.30, an assay of 99.0 - 105.0%, and is denoted by the CAS number 7791-18-6. This product is very soluble in water, and freely soluble alcohol. Magnesium Chloride 6H2O FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Magnesium Phosphate Dibasic FCC | Canton Chem, Inc. | Magnesium Phosphate Dibasic FCC appears as a white colored crystalline powder. This product has a molecular weight of 174.33, an assay of 96% minimum, and is denoted by the CAS number 7782-75-4. This product is slightly soluble in water, and insoluble alc...展開 Magnesium Phosphate Dibasic FCC appears as a white colored crystalline powder. This product has a molecular weight of 174.33, an assay of 96% minimum, and is denoted by the CAS number 7782-75-4. This product is slightly soluble in water, and insoluble alcohol. Magnesium Phosphate Dibasic FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Magnesium Phosphate Tribasic FCC | Canton Chem, Inc. | Magnesium Phosphate Tribasic FCC appears as a white colored crystalline powder. This product has a molecular weight of 262.86, an assay of 98.0 - 101.5%, and is denoted by the CAS number 7757-87-1. This product is practically insoluble in water, and readi...展開 Magnesium Phosphate Tribasic FCC appears as a white colored crystalline powder. This product has a molecular weight of 262.86, an assay of 98.0 - 101.5%, and is denoted by the CAS number 7757-87-1. This product is practically insoluble in water, and readily soluble in dilute mineral acids. Magnesium Phosphate Tribasic FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Magnesium Sulphate 7H2O FCC | Canton Chem, Inc. | Magnesium Sulphate 7H2O FCC appears as colorless crystals or a white colored crystalline powder or granules. This product has a molecular weight of 246.47, an assay of 95.5% minimum, and is denoted by the CAS number 10034-99-8. This product is readily sol...展開 Magnesium Sulphate 7H2O FCC appears as colorless crystals or a white colored crystalline powder or granules. This product has a molecular weight of 246.47, an assay of 95.5% minimum, and is denoted by the CAS number 10034-99-8. This product is readily soluble in water, sparingly soluble in alcohol, and slowly soluble in glycerine. Magnesium Sulphate 7H2O FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Manganese Chloride 4H2O FCC | Canton Chem, Inc. | Manganese Chloride 4H2O FCC appears as large, irregular, pink, translucent crystals. This product has a molecular weight of 197.91, an assay of 98.0 - 102.0%, and is denoted by the CAS number 13446-34-9. This product is freely soluble in water. Manganese ...展開 Manganese Chloride 4H2O FCC appears as large, irregular, pink, translucent crystals. This product has a molecular weight of 197.91, an assay of 98.0 - 102.0%, and is denoted by the CAS number 13446-34-9. This product is freely soluble in water. Manganese Chloride 4H2O FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Manganese Sulphate Monohydrate FCC | Canton Chem, Inc. | Manganese Sulphate Monohydrate FCC appears as a pale pink colored, granular, powder. This product has a molecular weight of 169.02, an assay of 98.0 - 102.0%, and is denoted by the CAS number 10034-96-5. This product is freely soluble in water. Manganese ...展開 Manganese Sulphate Monohydrate FCC appears as a pale pink colored, granular, powder. This product has a molecular weight of 169.02, an assay of 98.0 - 102.0%, and is denoted by the CAS number 10034-96-5. This product is freely soluble in water. Manganese Sulphate Monohydrate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Mesquite Smoke Concentrate Type M (#3300408011) | Frutarom Industries Ltd. | Mesquite smoke concentrate type M (#3300408011) is a brown liquid with a characteristic smoke flavor and aroma. All flavor ingredients contained in this product are approved for use in a regulation of the Food and Drug Administration or are listed as Gene...展開 Mesquite smoke concentrate type M (#3300408011) is a brown liquid with a characteristic smoke flavor and aroma. All flavor ingredients contained in this product are approved for use in a regulation of the Food and Drug Administration or are listed as Generally Recognized As Safe (GRAS) on a reliable published industry association list. Ingredients declaration is natural mesquite smoke flavor. *** Does not contain Caramel Color *** 收起 | |
| Potassium Bromate FCC | Canton Chem, Inc. | Potassium Bromate FCC appears as a white colored crystalline or granular powder. This product has a molecular weight of 167.00, an assay of 99.5 - 101.0%, and is denoted by the CAS number 7758-01-02. This product is soluble in water, and slightly soluble ...展開 Potassium Bromate FCC appears as a white colored crystalline or granular powder. This product has a molecular weight of 167.00, an assay of 99.5 - 101.0%, and is denoted by the CAS number 7758-01-02. This product is soluble in water, and slightly soluble in alcohol. Potassium Bromate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Potassium Carbonate FCC | Canton Chem, Inc. | Potassium Carbonate FCC appears as a deliquescent, white colored crystalline or granular powder. This product has a molecular weight of 138.21, an assay of 99.0 - 100.5%, and is denoted by the CAS number 584-08-7. This product is very soluble in water, an...展開 Potassium Carbonate FCC appears as a deliquescent, white colored crystalline or granular powder. This product has a molecular weight of 138.21, an assay of 99.0 - 100.5%, and is denoted by the CAS number 584-08-7. This product is very soluble in water, and insoluble in alcohol. Potassium Carbonate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Potassium Chloride FCC | Canton Chem, Inc. | Potassium Chloride FCC appears as colorless prismatic crystals, or as a white colored granular powder. This product has a molecular weight of 74.55, an assay of 99.0% minimum, and is denoted by the CAS number 7447-40-7. This product is freely soluble in w...展開 Potassium Chloride FCC appears as colorless prismatic crystals, or as a white colored granular powder. This product has a molecular weight of 74.55, an assay of 99.0% minimum, and is denoted by the CAS number 7447-40-7. This product is freely soluble in water, and insoluble in alcohol. Potassium Chloride FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Potassium Citrate Tribasic FCC | Canton Chem, Inc. | Potassium Citrate Tribasic FCC appears as transparent crystals, or as a white colored granular powder. This product has a molecular weight of 324.41, an assay of 99.0 - 100.5%, and is denoted by the CAS number 6100-05-06. This product is freely soluble in...展開 Potassium Citrate Tribasic FCC appears as transparent crystals, or as a white colored granular powder. This product has a molecular weight of 324.41, an assay of 99.0 - 100.5%, and is denoted by the CAS number 6100-05-06. This product is freely soluble in water, and almost insoluble in alcohol. Potassium Citrate Tribasic FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Potassium Hydrogen Carbonate FCC | Canton Chem, Inc. | Potassium Hydrogen Carbonate FCC appears as a colorless, transparent, monoclinic prism, or as a white colored granular powder. This product has a molecular weight of 100.12, an assay of 99.0 - 101.0%, and is denoted by the CAS number 298-14-6. This produc...展開 Potassium Hydrogen Carbonate FCC appears as a colorless, transparent, monoclinic prism, or as a white colored granular powder. This product has a molecular weight of 100.12, an assay of 99.0 - 101.0%, and is denoted by the CAS number 298-14-6. This product is freely soluble in water, and insoluble in alcohol. Potassium Hydrogen Carbonate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Potassium Hydroxide Pellets FCC | Canton Chem, Inc. | Potassium Hydroxide Pellets FCC appears as white colored pellets. This product has a molecular weight of 56.11, an assay of 85.0 - 100.5%, and is denoted by the CAS number 1310-58-3. This product is very soluble in water, alcohol, and glycerin. Potassium ...展開 Potassium Hydroxide Pellets FCC appears as white colored pellets. This product has a molecular weight of 56.11, an assay of 85.0 - 100.5%, and is denoted by the CAS number 1310-58-3. This product is very soluble in water, alcohol, and glycerin. Potassium Hydroxide Pellets FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Potassium Iodate FCC | Canton Chem, Inc. | Potassium Iodate FCC appears as white colored crystalline powder. This product has a molecular weight of 214.00, an assay of 99.0 - 101.0%, and is denoted by the CAS number 7758-05-06. This product is soluble in water, and insoluble in alcohol. Potassium ...展開 Potassium Iodate FCC appears as white colored crystalline powder. This product has a molecular weight of 214.00, an assay of 99.0 - 101.0%, and is denoted by the CAS number 7758-05-06. This product is soluble in water, and insoluble in alcohol. Potassium Iodate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Potassium Iodide FCC | Canton Chem, Inc. | Potassium Iodide FCC appears as transparent, colorless, opaque, or white colored crystals. This product has a molecular weight of 166.00, an assay of 99.0 - 101.5%, and is denoted by the CAS number 7681-11-0. This product is very soluble in water, and fre...展開 Potassium Iodide FCC appears as transparent, colorless, opaque, or white colored crystals. This product has a molecular weight of 166.00, an assay of 99.0 - 101.5%, and is denoted by the CAS number 7681-11-0. This product is very soluble in water, and freely soluble in glycerin. Potassium Iodide FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Potassium Metabisulphite FCC | Canton Chem, Inc. | Potassium Metabisulphite FCC appears as a colorless or white colored crystalline powder or granules. This product has a molecular weight of 222.31, an assay of 90.0% minimum, and is denoted by the CAS number 16731-55-8. This product is soluble in water, a...展開 Potassium Metabisulphite FCC appears as a colorless or white colored crystalline powder or granules. This product has a molecular weight of 222.31, an assay of 90.0% minimum, and is denoted by the CAS number 16731-55-8. This product is soluble in water, and insoluble in alcohol. Potassium Metabisulphite FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Potassium Nitrate FCC | Canton Chem, Inc. | Potassium Nitrate FCC appears as a colorless, transparent prism, or as a white colored crystalline powder or granules. This product has a molecular weight of 101.10, an assay of 99.0 - 100.5%, and is denoted by the CAS number 7757-79-1. This product is fr...展開 Potassium Nitrate FCC appears as a colorless, transparent prism, or as a white colored crystalline powder or granules. This product has a molecular weight of 101.10, an assay of 99.0 - 100.5%, and is denoted by the CAS number 7757-79-1. This product is freely soluble in water, and very soluble in boiling water. Potassium Nitrate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Potassium Nitrite FCC | Canton Chem, Inc. | Potassium Nitrite FCC appears as a white or yellow colored crystalline powder or granules. This product has a molecular weight of 85.10, an assay of 90.0 - 100.5%, and is denoted by the CAS number 7758-09-0. This product is very soluble in water, and spar...展開 Potassium Nitrite FCC appears as a white or yellow colored crystalline powder or granules. This product has a molecular weight of 85.10, an assay of 90.0 - 100.5%, and is denoted by the CAS number 7758-09-0. This product is very soluble in water, and sparingly soluble in alcohol. Potassium Nitrite FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Potassium Phosphate Dibasic FCC | Canton Chem, Inc. | Potassium Phosphate Dibasic FCC appears as a colorless or white colored crystalline granules. This product has a molecular weight of 174.18, an assay of 98.0% minimum, and is denoted by the CAS number 7758-11-04. This product is very soluble in water, and...展開 Potassium Phosphate Dibasic FCC appears as a colorless or white colored crystalline granules. This product has a molecular weight of 174.18, an assay of 98.0% minimum, and is denoted by the CAS number 7758-11-04. This product is very soluble in water, and insoluble in alcohol. Potassium Phosphate Dibasic FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Potassium Phosphate Monobasic FCC | Canton Chem, Inc. | Potassium Phosphate Monobasic FCC appears as a colorless or white colored crystalline powder or granules. This product has a molecular weight of 136.09, an assay of 98.0% minimum, and is denoted by the CAS number 7778-77-0. This product is freely soluble ...展開 Potassium Phosphate Monobasic FCC appears as a colorless or white colored crystalline powder or granules. This product has a molecular weight of 136.09, an assay of 98.0% minimum, and is denoted by the CAS number 7778-77-0. This product is freely soluble in water, and insoluble in alcohol. Potassium Potassium Phosphate Monobasic FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Potassium Phosphate Tribasic FCC | Canton Chem, Inc. | Potassium Phosphate Tribasic FCC appears as white colored crystals or granules. This product has a molecular weight of 212.27, an assay of 97.0% minimum, and is denoted by the CAS number 7778-53-2. This product is freely soluble in water, and insoluble in...展開 Potassium Phosphate Tribasic FCC appears as white colored crystals or granules. This product has a molecular weight of 212.27, an assay of 97.0% minimum, and is denoted by the CAS number 7778-53-2. This product is freely soluble in water, and insoluble in alcohol. Potassium Potassium Phosphate Tribasic FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Potassium Sodium Tartrate FCC | Canton Chem, Inc. | Potassium Sodium Tartrate FCC appears as colorless crystals or as a white colored crystalline powder. This product has a molecular weight of 282.22, an assay of 99.0 - 102.0%, and is denoted by the CAS number 6381-59-5. This product is very soluble in wat...展開 Potassium Sodium Tartrate FCC appears as colorless crystals or as a white colored crystalline powder. This product has a molecular weight of 282.22, an assay of 99.0 - 102.0%, and is denoted by the CAS number 6381-59-5. This product is very soluble in water, and practically insoluble in alcohol. Potassium Sodium Tartrate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Potassium Sulphate FCC | Canton Chem, Inc. | Potassium Sulphate FCC appears as colorless or white colored crystals or crystalline powder. This product has a molecular weight of 174.26, an assay of 99.0 - 100.5%, and is denoted by the CAS number 7778-80-5. This product is soluble in water, and insolu...展開 Potassium Sulphate FCC appears as colorless or white colored crystals or crystalline powder. This product has a molecular weight of 174.26, an assay of 99.0 - 100.5%, and is denoted by the CAS number 7778-80-5. This product is soluble in water, and insoluble in alcohol. Potassium Sulphate FCC is used in food and beverage products as a mineral fortifier. 收起 | |
| Powdered Extract Rose Hips FR (#3320431801) | Frutarom Industries Ltd. | Powdered extract rose hips FR (#3320431801) is the dried, powdered extract of rosa canina L. (family Rosaceae) or other related Rosa species. The plant is native to Europe, North America, North Africa and Western Asia. Powdered extract rose hips FR is a n...展開 Powdered extract rose hips FR (#3320431801) is the dried, powdered extract of rosa canina L. (family Rosaceae) or other related Rosa species. The plant is native to Europe, North America, North Africa and Western Asia. Powdered extract rose hips FR is a natural source of Vitamin C. 收起 | |
| SE Chrysanthemum FR GMO Free (#3327307501) | Frutarom Industries Ltd. | SE Chrysanthemum FR GMO free (#3327307501) is a a brown to dark brown viscous material with a characteristic flavor and aroma and is GMO free. | |
| SILBIONE CAF 72576 RED | Elkem Silicones | SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 a...展開 SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE CAF 72589 | Elkem Silicones | SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxan...展開 SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 70004 | Elkem Silicones | SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based ...展開 SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 71500 GRY | Elkem Silicones | SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS ...展開 SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71528 | Elkem Silicones | SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展開 SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71550 | Elkem Silicones | SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展開 SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE FLD 70047V100 | Elkem Silicones | SILBIONE FLD 70047 V 100, V 200 and V 350 are linear POLYDIMETHYLSILOXANES. | |
| SILBIONE FLD 70047V12 500 | Elkem Silicones | SILBIONE FLD 70047 V 12 500 to V 300 000 are linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE FLD 70047V30 000 | Elkem Silicones | SILBIONE FLD 70047V30 000 is a linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE FLD 70047V300 000 | Elkem Silicones | SILBIONE FLD 70047V300 000 is a linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE PASTE 70428 | Elkem Silicones | SILBIONE PASTE 70428 is a mixture of polydimethylsiloxane oil and inert filler. This paste is recommended for lubricating installations and equipment to process or package foodstuffs. It can therefore, occasionally, be in contact with foodstuffs. The comp...展開 SILBIONE PASTE 70428 is a mixture of polydimethylsiloxane oil and inert filler. This paste is recommended for lubricating installations and equipment to process or package foodstuffs. It can therefore, occasionally, be in contact with foodstuffs. The composition of SILBIONE Paste 70428 meets the regulations in force in the following countries: FRANCE : Brochure n° 1 227 of the Journal Officiel de la République Française. For aqueous contact only. Tolerated provided the user checks that the paste does not penetrate into the foodstuffs and that if the machinery overheats it does not release any substances which might affect the foodstuff. NB: BLUESTAR SILICONES has checked, by heating SILBIONE Paste 70428 at 150°C for 24 hours, that the product does not release any toxic substances. Circular of 26 Mai 1971 on materials in contact with foodstuffs. GERMANY: Bundesgesundheitsamt Recommendations BGA chapter XV A on « Silicones ». Tolerated provided the user checks that the product does not affect either the odour or the taste of foodstuffs with which it might be in contact. USA: FDA Regulations under paragraph 178 3570 of the Code of Federal Regulations, part 21, on « Lubricants with incidental food contact ». For other countries, please consult us. 收起 | |
| SILBIONE PRIM 70073 | Elkem Silicones | SILBIONE PRIMER 70073 is an adhesion promoter for SILBIONE CAF and SILBIONE CAF DISPERSIONS (one component room temperature curing silicone elastomers). | |
| SILBIONE RES 76405 | Elkem Silicones | SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints develo...展開 SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints developed to protect and decorate these materials. The products obtained after crosslinking of SILBIONE RESINE 76405 contain only substances permitted by the Food Contact regulations currently in force. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coatings obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILCOLAPSE 7140 | Elkem Silicones | SILCOLAPSE 7140 is a non-ionic aqueous emulsion containing dimethylpoly- siloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 7140 has many applications in food industry. It can also be used in ind...展開 SILCOLAPSE 7140 is a non-ionic aqueous emulsion containing dimethylpoly- siloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 7140 has many applications in food industry. It can also be used in industrial applications requiring a high level of purity. 收起 | |
| SILCOLEASE ADD 702 | Elkem Silicones | SILCOLEASE ADD 702 is a white, granular powder, freely soluble in water and possessing a slight odour of ammonia. It is used with emulsion SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE EMUL RCA 954 | Elkem Silicones | SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised r...展開 SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised release liner. This RCA emulsion is used as a RCA in polyaddition type emulsions in the SILCOLEASE range. 收起 | |
| SILCOLEASE EMULSION 902 | Elkem Silicones | SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. ...展開 SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 907 | Elkem Silicones | SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence o...展開 SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence of suitable emulsions of crosslinker and an organometallic catalyst, for example (e.g. SILCOLEASE EMULSION XL 969 and SILCOLEASE EMULSION CATA 903) to give an ELASTOMERIC type coating. It may be used to coat substrates that meet “food contact application” requirements. 收起 | |
| SILCOLEASE EMULSION 908 | Elkem Silicones | SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展開 SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 912 | Elkem Silicones | SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展開 SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 913 producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 915 | Elkem Silicones | SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. ...展開 SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 925 | Elkem Silicones | SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYS...展開 SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION CATA 903 | Elkem Silicones | SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substr...展開 SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substrates, for example SILCOLEASE EMULSION 908. It is recommended uniquely for the catalysis of polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION CATA 909 | Elkem Silicones | SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory releas...展開 SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory release coating for flexible substrates such as papers and films. 收起 | |
| SILCOLEASE EMULSION CATA 911 | Elkem Silicones | SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates...展開 SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates, for example SILCOLEASE EMULSION 915. It only catalyses polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION XL 966 | Elkem Silicones | SILCOLEASE EMULSION CROSSLINKER 966 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 968 | Elkem Silicones | SILCOLEASE EMULSION XL 968 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 969 | Elkem Silicones | SILCOLEASE EMULSION XL 969 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE HA 1 | Elkem Silicones | SILCOLEASE HA-1 is a water-based additive. It is used with emulsion. SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE PC-105NXL | Elkem Silicones | SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an e...展開 SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an emulsion of a low vinyl content silicone fluid but without the methyl hydrogen siloxane crosslinker pre-added. As such, SILCOLEASE PC-105NXL offers the flexibility to the formulator of being able to modify the type or the amount of crosslinker to achieve special performance characteristics. A platinum catalyst emulsion is also required. Release modifier emulsions are available which, when blended with SILCOLEASE PC-105NXL in incrementally higher levels, will give correspondingly tighter release force performance. A platinum catalyst emulsion is also required. 收起 | |
| SILCOLEASE PC-107 | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展開 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-107 NXL | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展開 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188 | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展開 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ® PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ® PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ® PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188NXL | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展開 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ®PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ®PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ®PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-191 | Elkem Silicones | SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proporti...展開 SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the level of SILCOLEASE PC-191 is increased in the formulation. Unlike traditional tight release additives which are based on vinyl functional siloxane resins, SILCOLEASE PC-191 is based on hydride functionality. As a result, SILCOLEASE PC-191 may offer greater efficiency in affecting release response than the vinyl functional counterparts. 收起 | |
| SILCOLEASE PC-195NXL | Elkem Silicones | SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values incr...展開 SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values increasing proportionally as the level of SILCOLEASE PC-195NXL is increased. Additionally, when SILCOLEASE PC-195NXL is used at or near 100% of the polymer blend, very high release levels are achievable with both rubber based and acrylic adhesives. 收起 | |
| SILCOLEASE PC-197 | Elkem Silicones | SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing ...展開 SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the amount of SILCOLEASEPC-197 is increased in the formulation. SILCOLEASE PC-197 is based on a vinyl functional siloxane resin. 收起 | |
| SILCOLEASE PC-31 | Elkem Silicones | SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展開 SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-868 | Elkem Silicones | SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copoly...展開 SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 |
