| 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) | Beijing RBL Chemicals Co., Ltd. | 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) is an acrylate monomer. This product appears as a clear liquid and has good flexibility and dilution properties. It can be used in UV-coatings for metal, wood, and in ink applications. | |
| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetyl Tributyl Citrate (ATBC) | Chemceed | Acetyl Tributyl Citrate (ATBC) is a used as a biodegradable plasticizer for PVC and cellulose derivates, and it is approved for food contact materials and can even been used as a food additive. ATBC is also used as an emollient for personal care/cosmetics...展開 Acetyl Tributyl Citrate (ATBC) is a used as a biodegradable plasticizer for PVC and cellulose derivates, and it is approved for food contact materials and can even been used as a food additive. ATBC is also used as an emollient for personal care/cosmetics products such as aerosol hair sprays and nail polishes. In addition, ATBC can be used for pharmaceutical coatings (USP grade available), lubricants, and inks. 收起 | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Acryloyl Morpholine (ACMO) | Beijing RBL Chemicals Co., Ltd. | Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and so...展開 Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and solvents, and be used in adhesives, UV printing inks, and industrial coatings. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Benzotriazole | Chemceed | Benzotriazole is a corrosion inhibitor for copper and copper alloys, and is commonly used in water cooling systems. Additional benzotriazole applications include use as a silver polishing agent in dishwasher detergent, automotive antifreeze, antirust for ...展開 Benzotriazole is a corrosion inhibitor for copper and copper alloys, and is commonly used in water cooling systems. Additional benzotriazole applications include use as a silver polishing agent in dishwasher detergent, automotive antifreeze, antirust for photography, and use as a lubricant additive. 收起 | |
| Benzyl Alcohol USP | Chemceed | Benzyl Alcohol is used as a solvent for paints, inks, coatings. In personal care products, Benzyl Alcohol serves as a precursor in the production of esters used for soaps, perfurme, and flavor. For medical use, Benzyl Alcohol is used as a preservative due...展開 Benzyl Alcohol is used as a solvent for paints, inks, coatings. In personal care products, Benzyl Alcohol serves as a precursor in the production of esters used for soaps, perfurme, and flavor. For medical use, Benzyl Alcohol is used as a preservative due to its bacteriostatic and antipruritic properties. 收起 | |
| Benzyl Benzoate, USP | Chemceed | Benzyl Benzoate is a high solvating benzoate ester plasticizer that can be used in applications such as adhesives, caulks, and sealants. In inks and coatings, Benzyl Benzoate can soften binders to improve flexibility. | |
| Butyl Benzyl Phthalate (BBP) | Chemceed | Butyl Benzyl Phthalate (BBP) is a is high solvating, fast fusing plasticizer with high efficiency which can be used with a variety of resins. BBP is used for many PVC calendaring and extrusion operations and is an industry standard for vinyl flooring. BBP...展開 Butyl Benzyl Phthalate (BBP) is a is high solvating, fast fusing plasticizer with high efficiency which can be used with a variety of resins. BBP is used for many PVC calendaring and extrusion operations and is an industry standard for vinyl flooring. BBP also finds use in many coatings, inks, adhesives, and caulks. 收起 | |
| C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Decabromodiphenyl Oxide | Chemceed | Decabromodiphenyl Oxide is used as a flame retardant for elastomers, wire & cable, textile coatings, electrical & electronic equipment, automotive parts, and construction materials. | |
| Denatonium Benzoate, 20% in EG | Chemceed | Denatonium Benzoate is a bittering agent which is used to give a bitter taste to toxic products in order to make the product more difficult to ingest. Examples of products which contain denatonium benzoate are antifreeze, detergents, floor cleaner, paint ...展開 Denatonium Benzoate is a bittering agent which is used to give a bitter taste to toxic products in order to make the product more difficult to ingest. Examples of products which contain denatonium benzoate are antifreeze, detergents, floor cleaner, paint stripper and toilet cleaner. 收起 | |
| Dibutyl Maleate (DBM) | Chemceed | Dibutyl Maleate (DBM) is a plasticizer for vinyl resins, and is used for copolymers applications involving PVC and vinyl acetates. Dibutyl Maleate is an unsaturated ester which is used for creating sulfosuccinate surfactants in detergents and paints. Othe...展開 Dibutyl Maleate (DBM) is a plasticizer for vinyl resins, and is used for copolymers applications involving PVC and vinyl acetates. Dibutyl Maleate is an unsaturated ester which is used for creating sulfosuccinate surfactants in detergents and paints. Other applications of DBM include use in plastisols, dispersions, coatings, adhesives, and synthetic lubricants. 收起 | |
| Dibutyl Phthalate (DBP) | Chemceed | 鄰苯二甲酸二丁酯是一種增塑劑，通常應用於PVC和涂料中。ChemCeed以桶裝、手提袋裝和散裝供應。包裝需定制的請來電查問 | |
| Dibutyl Sebacate (DBS) | Chemceed | Dibutyl Sebacate (DBS) is used as a plasticizer suited for low temperature and is compatible with PVC, acrylic, nitrile rubber, and celluloses. Due to its non-toxicity and low temp performance DBS is ideal for vinyl food contact films. In addition, Dibuty...展開 Dibutyl Sebacate (DBS) is used as a plasticizer suited for low temperature and is compatible with PVC, acrylic, nitrile rubber, and celluloses. Due to its non-toxicity and low temp performance DBS is ideal for vinyl food contact films. In addition, Dibutyl Sebacate finds use in coatings, cosmetics, lubricants, and pharmaceuticals. 收起 | |
| Diisodecyl Adipate (DIDA) | Chemceed | Diisodecyl Adipate (DIDA) is a plasticizer with excellent low-temperature properties. DIDA works well as a part of a plasticizer blend, and is compatible with PVC, Cellulose acetate butyrate, Ethyl cellulose, Nitrocellulose, Polychloroprene,and Polyvinyl ...展開 Diisodecyl Adipate (DIDA) is a plasticizer with excellent low-temperature properties. DIDA works well as a part of a plasticizer blend, and is compatible with PVC, Cellulose acetate butyrate, Ethyl cellulose, Nitrocellulose, Polychloroprene,and Polyvinyl butyral. In inks and coatings, DIDA can soften binders to improve flexibility. DIDA can also be used in used in adhesives, caulk, sealants, and paint to improve properties. 收起 | |
| Diisodecyl Phthalate (DIDP) | Chemceed | Diisodecyl Phthalate (DIDP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DIDP is used in formualtions of screen printing inks. Additionally, DIDP can be used in applications such latex coatings, printing inks, textile coat...展開 Diisodecyl Phthalate (DIDP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DIDP is used in formualtions of screen printing inks. Additionally, DIDP can be used in applications such latex coatings, printing inks, textile coatings, paper coatings, and leather coatings, inks, adhesives, and sealants. 收起 | |
| Diisononyl Phthalate (DINP) | Chemceed | Diisononyl Phthalate (DINP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DINP is used in formualtions of screen printing inks. Additionally, DINP can be used in applications such as anti-corrosion paints, anti-fouling pain...展開 Diisononyl Phthalate (DINP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DINP is used in formualtions of screen printing inks. Additionally, DINP can be used in applications such as anti-corrosion paints, anti-fouling paints, lacquers, inks, adhesives, and sealants. 收起 | |
| Dimethyl Sebacate (DMS) | Chemceed | Dimethyl Sebacate (DMS) is a plasticizer for both nitrocellulose, rubber, vinyl resins. Dimethyl sebacate is used in the production of light stabilizers which are used in coatings to protect surfaces and pigments against photo degradation by deactivation ...展開 Dimethyl Sebacate (DMS) is a plasticizer for both nitrocellulose, rubber, vinyl resins. Dimethyl sebacate is used in the production of light stabilizers which are used in coatings to protect surfaces and pigments against photo degradation by deactivation of free radicals. Dimethyl sebacate can also be used as a solvent for resins and rubbers. In inks and coatings, DMS can soften binders to improve flexibility. 收起 | |
| Dioctyl Adipate (DOA) | Chemceed | Dioctyl adipate (DOA) is a PVC plasticizer that is also commonly used with primary plasticizers, like DOP, to create lubricant basetocks. Dioctyl adipate is also used in paints as a way to disperse pigments. For applications involving food, dioctyl adipat...展開 Dioctyl adipate (DOA) is a PVC plasticizer that is also commonly used with primary plasticizers, like DOP, to create lubricant basetocks. Dioctyl adipate is also used in paints as a way to disperse pigments. For applications involving food, dioctyl adipate can be used as a plasticizer in food contact polymers and rubbers. 收起 | |
| Dioctyl Phthalate (DOP) | Chemceed | Dioctyl Phthalate (DOP) is a general use Plasticizer. As a PVC plasticizer, DOP is used in formualtions of screen printing inks. Known for its good stability to heat and ultraviolet light, DOP can be used in applications such as paints, lacquers, inks, ad...展開 Dioctyl Phthalate (DOP) is a general use Plasticizer. As a PVC plasticizer, DOP is used in formualtions of screen printing inks. Known for its good stability to heat and ultraviolet light, DOP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. 收起 | |
| Dioctyl Sebacate (DOS) | Chemceed | Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and o...展開 Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and other organic solvents. DOS is recommended for use in adhesives and sealants. 收起 | |
| Dioctyl Terephthalate (DOTP) | Chemceed | Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacque...展開 Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. 收起 | |
| Dipropylene Glycol Diacrylate (DPGDA) | Beijing RBL Chemicals Co., Ltd. | Dipropylene Glycol Diacrylate (DPGDA) is an acrylate monomer that has low viscosity, low volatility, fast curing, and good dilution. This product appears as a clear liquid, and it can be used in adhesives, inks, and coatings. | |
| Disodium Sebacate (DSS) | Chemceed | Disodium Sebacate is a castor oil derivative which can be used in cosmetics, detergents, and as a corrosion inhibitor lubricants. | |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Epoxidized Soybean Oil (ESO) | Chemceed | 環氧化大豆油，是一種增塑劑，通常用於PVC和涂料應用。ChemCeed以桶裝、手提袋裝和散裝供應。包裝需定制的請來電查問 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| H0201 | Long Kou Windstar Chemical Co., Ltd. | H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0301 | Long Kou Windstar Chemical Co., Ltd. | H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0601 | Long Kou Windstar Chemical Co., Ltd. | H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0801 | Long Kou Windstar Chemical Co., Ltd. | H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0806 | Long Kou Windstar Chemical Co., Ltd. | H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0901 | Long Kou Windstar Chemical Co., Ltd. | H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0902 | Long Kou Windstar Chemical Co., Ltd. | H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0903 | Long Kou Windstar Chemical Co., Ltd. | H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0904 | Long Kou Windstar Chemical Co., Ltd. | H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0905 | Long Kou Windstar Chemical Co., Ltd. | H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0906 | Long Kou Windstar Chemical Co., Ltd. | H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| L911P Plasticizer | Chemceed | Linear 911P is a plasticizer used when low-temperature flexibility is required or for specific end-use applications that require unique processing where the performance requirements cannot be met with branched plasticizers. 911P is especially useful in a...展開 Linear 911P is a plasticizer used when low-temperature flexibility is required or for specific end-use applications that require unique processing where the performance requirements cannot be met with branched plasticizers. 911P is especially useful in anti- fogging coatings, automotive sealants, and shoe polish. 收起 | |
| LA Glass Flake GF001LA | Glassflake Ltd | LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100LA | Glassflake Ltd | LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100MLA | Glassflake Ltd | LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique subst...展開 LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Moonshine® AgFlake 100-100 (GFEAGF-1100) | Glassflake Ltd | Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings...展開 Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-20 (GFEAGF-1020) | Glassflake Ltd | Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-40 (GFEAGF-1040) | Glassflake Ltd | Moonshine® AgFlake 100-40 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 40 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-40 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 40 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-60 (GFEAGF-1060) | Glassflake Ltd | Moonshine® AgFlake 100-60 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 60 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-60 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 60 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-80 (GFEAGF-1080) | Glassflake Ltd | Moonshine® AgFlake 100-80 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 80 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-80 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 80 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AuFlake 500-90 (GFEAUF-5090) | Glassflake Ltd | Moonshine® AuFlake 500-90 are thin borosilicate glass flakes encapsulated in silver, gold, and tin oxide. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 90 μm. High conductivity can be achie...展開 Moonshine® AuFlake 500-90 are thin borosilicate glass flakes encapsulated in silver, gold, and tin oxide. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 90 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® Blue Shimmer (GFEB) | Glassflake Ltd | Moonshine® Blue Shimmer (GFEB) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high t...展開 Moonshine® Blue Shimmer (GFEB) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Blue Sparkle (GFEBS) | Glassflake Ltd | Moonshine® Blue Sparkle (GFEBS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high ...展開 Moonshine® Blue Sparkle (GFEBS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Bronze Ultra Shimmer (GFEBRSU) | Glassflake Ltd | Moonshine® Bronze Ultra Shimmer (GFEBRSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined ...展開 Moonshine® Bronze Ultra Shimmer (GFEBRSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) | Glassflake Ltd | Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display...展開 Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Blue-Green-Gold Sparkle (GFE-BGGS) | Glassflake Ltd | Moonshine® Colour Travel Blue-Green-Gold Sparkle (GFE-BGGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display st...展開 Moonshine® Colour Travel Blue-Green-Gold Sparkle (GFE-BGGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) | Glassflake Ltd | Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...展開 Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Gold-Red-Violet Shimmer (GFE-GRV) | Glassflake Ltd | Moonshine® Colour Travel Gold-Red-Violet Shimmer (GFE-GRV) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display...展開 Moonshine® Colour Travel Gold-Red-Violet Shimmer (GFE-GRV) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Gold-Red-Violet Sparkle (GFE-GRVS) | Glassflake Ltd | Moonshine® Colour Travel Gold-Red-Violet Sparkle (GFE-GRVS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that displa...展開 Moonshine® Colour Travel Gold-Red-Violet Sparkle (GFE-GRVS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) | Glassflake Ltd | Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...展開 Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Red-Violet-Blue Shimmer (GFE-RVB) | Glassflake Ltd | Moonshine® Colour Travel Red-Violet-Blue Shimmer (GFE-RVB) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display...展開 Moonshine® Colour Travel Red-Violet-Blue Shimmer (GFE-RVB) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Red-Violet-Blue Sparkle (GFE-RVBS) | Glassflake Ltd | Moonshine® Colour Travel Red-Violet-Blue Sparkle (GFE-RVBS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that displa...展開 Moonshine® Colour Travel Red-Violet-Blue Sparkle (GFE-RVBS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) | Glassflake Ltd | Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...展開 Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Violet-Blue-Green Shimmer (GFE-VBG) | Glassflake Ltd | Moonshine® Colour Travel Violet-Blue-Green Shimmer (GFE-VBG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that displ...展開 Moonshine® Colour Travel Violet-Blue-Green Shimmer (GFE-VBG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Violet-Blue-Green Sparkle (GFE-VBGS) | Glassflake Ltd | Moonshine® Colour Travel Violet-Blue-Green Sparkle (GFE-VBGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that disp...展開 Moonshine® Colour Travel Violet-Blue-Green Sparkle (GFE-VBGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) | Glassflake Ltd | Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments th...展開 Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Copper Ultra Shimmer (GFECOSU) | Glassflake Ltd | Moonshine® Copper Ultra Shimmer (GFECOSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined w...展開 Moonshine® Copper Ultra Shimmer (GFECOSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Gold Shimmer (GFEG) | Glassflake Ltd | Moonshine® Gold Shimmer (GFEG) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high tr...展開 Moonshine® Gold Shimmer (GFEG) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Gold Sparkle (GFEGS) | Glassflake Ltd | Moonshine® Gold Sparkle (GFEGS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high t...展開 Moonshine® Gold Sparkle (GFEGS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Green Shimmer (GFEGR) | Glassflake Ltd | Moonshine® Green Shimmer (GFEGR) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high ...展開 Moonshine® Green Shimmer (GFEGR) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Green Sparkle (GFEGRS) | Glassflake Ltd | Moonshine® Green Sparkle (GFEGRS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high...展開 Moonshine® Green Sparkle (GFEGRS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Metallic Gold Ultra Shimmer (GFEMGSU) | Glassflake Ltd | Moonshine® Metallic Gold Ultra Shimmer (GFEMGSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors com...展開 Moonshine® Metallic Gold Ultra Shimmer (GFEMGSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 |
