| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| AquaFLON® 178G (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and polyethylene wax in an aqueous dispersion. AquaFLON® 178G is recommended for water-based inks. | |
| AquaFLON® 50 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for ...展開 AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. 收起 | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® 605 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical polyethylene wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in inks. | |
| AquaFLON® 797 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and polyethylene wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® MG (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. AquaFLON® MG is recommended for thin film water based compositions like printing inks, and overprint varnishes. | |
| Aquapel (Ink Additive) | Shamrock Technologies, Inc. 三叶科技 | 憎水型添加劑，可控制油墨中的水粘附性。可用於平版印刷油墨 | |
| Aquapel Three (Ink Additive) | Shamrock Technologies, Inc. 三叶科技 | 憎水型添加劑，可控制平版印刷油墨中的水粘附性。由於它的高粘度，它對油墨幾乎沒有稀釋效果 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| CeraSPERSE 171 (Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 171 is polyethylene wax compounded in refined linseed oil (VOC-free). CeraSPERSE 171 is recommeneded for use in sheetfed ink. | |
| CeraSPERSE 174 (Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 174 is PTFE (polytetrafluoroethylene) and polyethylene wax compounded in refined linseed oil. CeraSPERSE 174 is recommended for use in sheetfed ink. | |
| CeraSPERSE 442DV (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 442DV is PTFE (dark colored polytetrafluoroethylene) and wax compounded in ink oil. | |
| CeraSPERSE UV 636 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 25%氧化聚乙烯蠟乳液，分散於TRPGDA中，用於UV固化油墨和涂料。可提供滑爽度和過渡耐磨性能，並維持原有的光澤和透明度 | |
| Chlorinated Rubber TR1-CR-1 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展開 Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-2 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine...展開 Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-3 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marin...展開 Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-4 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展開 Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Cyclohexanone | Yueyang Dongrun Chemical Co., Ltd. 岳阳东润化工有限公司 | Cyclohexanone is an important industrial solvent, capable of dissolving cellulose ethers, cellulose esters, nitrocellulose, alkaline base dyestuff, PVC, polyvinyl acetate, polymethylmethacrylate, polystyrene, coumarone resin, 100% phenol resin, modified p...展開 Cyclohexanone is an important industrial solvent, capable of dissolving cellulose ethers, cellulose esters, nitrocellulose, alkaline base dyestuff, PVC, polyvinyl acetate, polymethylmethacrylate, polystyrene, coumarone resin, 100% phenol resin, modified phenol resin, and various natural resins. Due to its extensive mutual solubility, good dissolvability, low volatility and toxicity, it is extremely suitable for upscale solvent, coating and printing ink fields. This product is compatible with various types of organic solvents. 收起 | |
| EEP (Ethyl 3–Ethoxypropionate) | Yueyang Dongrun Chemical Co., Ltd. 岳阳东润化工有限公司 | EEP (Ethyl 3–Ethoxypropionate) is a type of solvent specially produced for automotive paint industries and silk screen printing ink industries. Benefits of using this product include excellent flow and leveling as well as super fixation when compared with...展開 EEP (Ethyl 3–Ethoxypropionate) is a type of solvent specially produced for automotive paint industries and silk screen printing ink industries. Benefits of using this product include excellent flow and leveling as well as super fixation when compared with similar products. It provides low odor and high purity, and gives novel technology at a low cost. 收起 | |
| F-100 Polyaldehyde Resin | Yueyang Dongrun Chemical Co., Ltd. 岳阳东润化工有限公司 | F-100 Polyaldehyde resin is a condensation product from aliphatic and urea which is bright and resistant to hydrolysis. Polyaldehyde resins are best suited for ink, coatings, and pigment pastes. It has a Color Number of (ISO 4630-1:2004). | |
| F-80 Polyaldehyde Resin | Yueyang Dongrun Chemical Co., Ltd. 岳阳东润化工有限公司 | F-80 Polyaldehyde resin is a condensation product from aliphatic and urea which is bright and resistant to hydrolysis. Polyaldehyde resins are best suited for ink, coatings, and pigment pastes. It has a Color Number of (ISO 4630-1:2004). | |
| FluoroSLIP® 225 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 低分子量聚乙烯和聚四氟乙烯混合物。用於溶劑型和水性油墨 | |
| FluoroSLIP® 421 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 421 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 421 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 511 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 細粒徑的高分子量聚乙烯和聚四氟乙烯混合物，可為配方提供出色的耐磨性和良好的滑爽度。用於膠印、UV和鐵皮印刷油墨和套印清漆 | |
| FluoroSLIP® 515 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 515 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 515 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 533 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 533 is a hydrophilic polyethylene wax and PTFE blend where the polyethylene wax shows a uniform melting range peaking at 97°C. FluoroSLIP® 533 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 605 (PTFE / Polytheylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 高分子量聚乙烯和聚四氟乙烯混合物，可提供較好的耐摩擦，耐磨和抗磨損性能，不提供滑爽度 | |
| FluoroSLIP® 731MG (PTFE / Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 細微粉化，高熔點蠟合金粉末和聚四氟乙烯混合物。可增加潤滑度、硬度、抗粘連性能和抗磨損以及耐磨性能。應用於溶劑型和水性油墨中 | |
| FluoroSPERSE® 153V (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 穩定的50%微粉化聚四氟乙烯乳液，用於通用型平版印刷油墨體系。用於熱固平版印刷油墨。可結合聚乙烯提高抗磨損性能 | |
| FluoroSPERSE® 6153V (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 6153V is a micronized PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 6153V is recommended for use in offset inks. | |
| FluoroSPERSE® 755 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 755 is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 755 is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 7908 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 7908 is a PTFE (polytetrafluoroethylene) micropowder dispersion in a lithographic varnish. | |
| FluoroSPERSE® 8233 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 8233 is a dispersion of polytetrafluoroethylene (PTFE) micropowder in a soya alkyd vehicle. | |
| FluoroSPERSE® 966 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 966 is a PTFE (polytetrafluoroethylene) dispersion in a petrolatum and soya alkyd drying oil. FluoroSPERSE® 966 is recommended for offset and heat set inks. | |
| FluoroSPERSE® UV 808 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® UV 808 is a 40% dispesion of PTFE (polytetrafluoroethylene) in TRPGDA monomer. | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| H0201 | Long Kou Windstar Chemical Co., Ltd. | H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0301 | Long Kou Windstar Chemical Co., Ltd. | H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0601 | Long Kou Windstar Chemical Co., Ltd. | H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0801 | Long Kou Windstar Chemical Co., Ltd. | H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0806 | Long Kou Windstar Chemical Co., Ltd. | H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0901 | Long Kou Windstar Chemical Co., Ltd. | H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0902 | Long Kou Windstar Chemical Co., Ltd. | H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0903 | Long Kou Windstar Chemical Co., Ltd. | H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0904 | Long Kou Windstar Chemical Co., Ltd. | H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0905 | Long Kou Windstar Chemical Co., Ltd. | H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0906 | Long Kou Windstar Chemical Co., Ltd. | H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| HHR-120 Polyketone Resin | Yueyang Dongrun Chemical Co., Ltd. 岳阳东润化工有限公司 | HHR-120 Polyketone Resin is a kind of hard resin with high photostability. It is soluble in any solvent used in the coating industry, except for fatty alkane and water. This product can be mixed and solved with many resins used in paints and inks. LHR-120...展開 HHR-120 Polyketone Resin is a kind of hard resin with high photostability. It is soluble in any solvent used in the coating industry, except for fatty alkane and water. This product can be mixed and solved with many resins used in paints and inks. LHR-120 Polyketone Resin can greatly increase glossiness, adhesion, pigment wettability, hardness of surface layer, and increase the system's solid content. This product has a hydroxy value of 150 mgKOH/g or more. 收起 | |
| Hydrocer 257 (Polyethylene Wax Disperison) | Shamrock Technologies, Inc. 三叶科技 | 50%水性低分子量聚乙烯蠟乳液。可提供良好的耐摩擦性能和滑爽度 | |
| Hydrocer 357 (Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 50%水性高分子量聚乙烯蠟乳液。可提供良好的耐摩擦性能和滑爽度 | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer 7206 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer DP-69 (Paraffin Wax Microdispersion) | Shamrock Technologies, Inc. 三叶科技 | 水性50%固體石蠟微粒分散乳液。用於水性油墨和涂料中，可提供良好的表面滑爽度和憎水性。 | |
| Hydrocer EE 95 (Polyethylene Wax Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 陰離子，高密度聚乙烯乳液。可改善水性油墨、涂料和套印清漆的耐磨性能和滑爽度。也可大大改善抗劃傷和耐膠印性能，以及滑動角結果 | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 石蠟的水性乳液。用於水性油墨和涂料中，具有出色的耐水性 | |
| Hydrocer ER 77 (Polypropylene Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 非離子型聚丙烯乳液。推薦作為水性油墨和涂料的防滑劑 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Isopropyl Acetate | Yueyang Dongrun Chemical Co., Ltd. 岳阳东润化工有限公司 | Isopropyl Acetate is a kind of liquid which smells like fruit, has no color and easily can be lighted. The speed of its vaporization is fast. It could be dissolved with ethanol, ketone, aether and other solvents, so it is called the “omnipotent solvent.” ...展開 Isopropyl Acetate is a kind of liquid which smells like fruit, has no color and easily can be lighted. The speed of its vaporization is fast. It could be dissolved with ethanol, ketone, aether and other solvents, so it is called the “omnipotent solvent.” It has a wide variety of uses, including as a solvent of coating, a dehydrating agent of acetic acid, in the medical industry, tobacco industry, and for high-end printing ink. 收起 | |
| KOMERATE A0010 | Green Chemical Co., Ltd. | KOMERATE A0010 is an aliphatic monofunctional acrylate monomer. It is characterized by good adhesion, low shrinkage, and low viscosity. | |
| KOMERATE A0010M | Green Chemical Co., Ltd. | KOMERATE A0010M is an aliphatic monofunctional monomer. It is characterized by low viscosity, low odor, and excellent solvency. | |
| KOMERATE A0016 | Green Chemical Co., Ltd. | KOMERATE A0016 is an aliphatic monofunctional monomer. It is characterized by low viscosity, low odor, and good compatibility. | |
| KOMERATE A0016M | Green Chemical Co., Ltd. | KOMERATE A0016M is a monofunctional monomer. It is characterized by good adhesion and high Tg. | |
| KOMERATE A0017 | Green Chemical Co., Ltd. | KOMERATE A0017 is an aliphatic, monofunctional tertiobutyl cyclohexanol acrylate. Fast reactivity, low viscosity and improved adhesion to plastics, metals, and other difficult substrates. | |
| KOMERATE A0017M | Green Chemical Co., Ltd. | KOMERATE A0017M is an aliphatic, monofunctional tertiobutyl cyclohexanol methacrylate. Low viscosity and improved adhesion to plastics, metals, and other difficult substrates. | |
| KOMERATE A002 | Green Chemical Co., Ltd. | KOMERATE A002 is a monofunctional monomer. It is characterized by good solvency and good adhesion on metal and plastics. | |
| KOMERATE A003 | Green Chemical Co., Ltd. | KOMERATE A003 is a monofunctional monomer. It has high refractive index and low volatility. | |
| KOMERATE A003M | Green Chemical Co., Ltd. | KOMERATE A003M is a monofunctional monomer. It is used to make polymers of high refractive index. | |
| KOMERATE A005 | Green Chemical Co., Ltd. | KOMERATE A005 is tetrahydrofurfuryl acrylate. It is a low viscosity polar mono-functional monomer that offers good adhesion properties. | |
| KOMERATE A005M | Green Chemical Co., Ltd. | KOMERATE A005M is a monofunctional monomer. It is characterized by excellent adhesion and good chemical resistance. | |
| KOMERATE A007 | Green Chemical Co., Ltd. | KOMERATE A007 is ethoxy ethoxy ethyl acrylate. It is a low viscosity monomer that offers good adhesion, flexibility, and low shrinkage properties. | |
| KOMERATE A008 | Green Chemical Co., Ltd. | KOMERATE A008 is a monofunctional monomer. It is characterized by high refractive index and good adhesion. | |
| KOMERATE A011 | Green Chemical Co., Ltd. | KOMERATE A011 is an ethoxylated o-phenylphenol acrylate monomer. It has high refractive index, low shrinkage, and good adhesion product. | |
| KOMERATE A014 | Green Chemical Co., Ltd. | KOMERATE A014 is phenol (EO) acrylate. It is a low volatility mono-functional, aromatic monomer that offers good adhesion properties. | |
| KOMERATE A014M | Green Chemical Co., Ltd. | KOMERATE A014M is a monofunctional methacrylate monomer. It is a low volatility mono-functional, aromatic monomer that offers good adhesion properties. | |
| KOMERATE A015 | Green Chemical Co., Ltd. | KOMERATE A015 is tetrahydrofurfuryl acrylate. It is a low viscosity and low toxicity polar mono-functional monomer that offers good adhesion properties. | |
| KOMERATE A015M | Green Chemical Co., Ltd. | KOMERATE A015M is mono-functional methacrylate. It is a low viscosity and low toxicity polar mono-functional monomer that offers good adhesion properties. | |
| KOMERATE A015P | Green Chemical Co., Ltd. | KOMERATE A015P is a monofunctional monomer. It is characterized by low skin irritation, and good adhesion. | |
| KOMERATE A021 | Green Chemical Co., Ltd. | KOMERATE A021 is a low volatility mono-functional monomer which can be polymerized in the presence of free radicals. Exhibits high refractive index. | |
| KOMERATE A024 | Green Chemical Co., Ltd. | KOMERATE A024 is phenol (EO)2 acrylate. It is a low volatility mono-functional, aromatic monomer that is good viscosity reducer. | |
| KOMERATE A026 | Green Chemical Co., Ltd. | KOMERATE A026 is a monofunctional monomer. It is characterized by low odor, low shrinkage, and low skin irritation. | |
| KOMERATE A030 | Green Chemical Co., Ltd. | KOMERATE A030 is mono-functional monomer. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A030M | Green Chemical Co., Ltd. | KOMERATE A030M is mono-functional monomer. It features water solubility, excellent wetting, and low Tg. It is recommended as a versatile intermediate for coatings and polymer modification. | |
| KOMERATE A031 | Green Chemical Co., Ltd. | KOMERATE A031 is a low volatility mono-functional monomer which can be polymerized in the presence of free radicals. Exhibits high refractive index. | |
| KOMERATE A040 | Green Chemical Co., Ltd. | KOMERATE A040 is a methoxy PEG400 acrylate monomer. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A040M | Green Chemical Co., Ltd. | KOMERATE A040M is a monofunctional methaacrylate. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A040TT | Green Chemical Co., Ltd. | KOMERATE A040TT is a methoxy PEG400 acrylate. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A044 | Green Chemical Co., Ltd. | KOMERATE A044 is mono-functional acrylate monomer. Offers low volatility, low shrinkage and good adhesion. | |
| KOMERATE A046 | Green Chemical Co., Ltd. | KOMERATE A046 is a monofunctional monomer. It is characterized by low skin irritation, good adhesion, and flexibility. | |
| KOMERATE A050 | Green Chemical Co., Ltd. | KOMERATE A050 is a methoxy PEG500 acrylate. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A050M | Green Chemical Co., Ltd. | KOMERATE A050M is a monofunctional monomer. It is characterized by good water solubility, low shrinkage, and excellent wetting. | |
| KOMERATE A060 | Green Chemical Co., Ltd. | KOMERATE A060 is a mono-functional acrylate monomer. It features water solubility, excellent wetting, and low Tg. | |
| KOMERATE A060M | Green Chemical Co., Ltd. | KOMERATE A060M is a mono-functional monomer. It features water solubility, excellent wetting, and low Tg. It is recommended as a versatile intermediate for coatings and polymer modification. | |
| KOMERATE A086 | Green Chemical Co., Ltd. | KOMERATE A086 is a monofunctional acrylate monomer. It is characterized by low skin irritation, good adhesion, and flexibility. | |
| KOMERATE A089 | Green Chemical Co., Ltd. | KOMERATE A089 is a monofunctional monomer. It is characterized by good adhesion, low shrinkage, and low viscosity. |
