| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| AquaFLON® 178G (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and polyethylene wax in an aqueous dispersion. AquaFLON® 178G is recommended for water-based inks. | |
| AquaFLON® 50 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for ...展開 AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. 收起 | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® 605 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical polyethylene wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in inks. | |
| AquaFLON® 797 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and polyethylene wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® MG (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. AquaFLON® MG is recommended for thin film water based compositions like printing inks, and overprint varnishes. | |
| Aquapel (Ink Additive) | Shamrock Technologies, Inc. 三叶科技 | 憎水型添加劑，可控制油墨中的水粘附性。可用於平版印刷油墨 | |
| Aquapel Three (Ink Additive) | Shamrock Technologies, Inc. 三叶科技 | 憎水型添加劑，可控制平版印刷油墨中的水粘附性。由於它的高粘度，它對油墨幾乎沒有稀釋效果 | |
| Benzophenone | Eutec Chemical Co., Ltd. | Benzophenone is an additive primarily used as an photoinitiator and sensitizer. Available as a white to off-white flake, with a melting point of 47-49℃, resulting in a clear transparent solution. This additive is suited for use with UV-cured resins in the...展開 Benzophenone is an additive primarily used as an photoinitiator and sensitizer. Available as a white to off-white flake, with a melting point of 47-49℃, resulting in a clear transparent solution. This additive is suited for use with UV-cured resins in the production of inks and coatings. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| CeraSPERSE 171 (Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 171 is polyethylene wax compounded in refined linseed oil (VOC-free). CeraSPERSE 171 is recommeneded for use in sheetfed ink. | |
| CeraSPERSE 174 (Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 174 is PTFE (polytetrafluoroethylene) and polyethylene wax compounded in refined linseed oil. CeraSPERSE 174 is recommended for use in sheetfed ink. | |
| CeraSPERSE 442DV (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 442DV is PTFE (dark colored polytetrafluoroethylene) and wax compounded in ink oil. | |
| CeraSPERSE UV 636 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 25%氧化聚乙烯蠟乳液，分散於TRPGDA中，用於UV固化油墨和涂料。可提供滑爽度和過渡耐磨性能，並維持原有的光澤和透明度 | |
| Chlorinated Rubber TR1-CR-1 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展開 Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-2 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine...展開 Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-3 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marin...展開 Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-4 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展開 Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Cyclohexanone | Yueyang Dongrun Chemical Co., Ltd. 岳阳东润化工有限公司 | Cyclohexanone is an important industrial solvent, capable of dissolving cellulose ethers, cellulose esters, nitrocellulose, alkaline base dyestuff, PVC, polyvinyl acetate, polymethylmethacrylate, polystyrene, coumarone resin, 100% phenol resin, modified p...展開 Cyclohexanone is an important industrial solvent, capable of dissolving cellulose ethers, cellulose esters, nitrocellulose, alkaline base dyestuff, PVC, polyvinyl acetate, polymethylmethacrylate, polystyrene, coumarone resin, 100% phenol resin, modified phenol resin, and various natural resins. Due to its extensive mutual solubility, good dissolvability, low volatility and toxicity, it is extremely suitable for upscale solvent, coating and printing ink fields. This product is compatible with various types of organic solvents. 收起 | |
| EEP (Ethyl 3–Ethoxypropionate) | Yueyang Dongrun Chemical Co., Ltd. 岳阳东润化工有限公司 | EEP (Ethyl 3–Ethoxypropionate) is a type of solvent specially produced for automotive paint industries and silk screen printing ink industries. Benefits of using this product include excellent flow and leveling as well as super fixation when compared with...展開 EEP (Ethyl 3–Ethoxypropionate) is a type of solvent specially produced for automotive paint industries and silk screen printing ink industries. Benefits of using this product include excellent flow and leveling as well as super fixation when compared with similar products. It provides low odor and high purity, and gives novel technology at a low cost. 收起 | |
| Eusorb UV-5033 (BP-5) | Eutec Chemical Co., Ltd. | Eusorb UV-5033 (BP-5) is a white or light yellow powder crystal powdered form of 2-Hydroxy-4-methoxybenzene-5-sulfonic acid sodium salt. It can be used in coatings and printing inks for UV curing and as a UV absorber and light stabilizer for glass product...展開 Eusorb UV-5033 (BP-5) is a white or light yellow powder crystal powdered form of 2-Hydroxy-4-methoxybenzene-5-sulfonic acid sodium salt. It can be used in coatings and printing inks for UV curing and as a UV absorber and light stabilizer for glass products, Plastics, thermoplastics and polyethylene films . 收起 | |
| Eusorb UV-5411 | Eutec Chemical Co., Ltd. | Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sh...展開 Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sheet, glazing materials for window, lighting, sign, marine, and auto applications), coatings, photo products and sealants. 收起 | |
| Eusorb UV-P | Eutec Chemical Co., Ltd. | Eusorb UV-P is a pale yellow crystalline powder with a melting point between 128-132℃. This product is an efficient UV-absorber for styrenic polymers, PVC, unsaturated polyesters, PU, acrylic polymers, polycarbonates, adhesives and coatings. | |
| Eutex 127 | Eutec Chemical Co., Ltd. | Eutex 127 is a slightly green-yellow fine powder with a melting point between 216-222℃. This product is an efficient optical brightener for polymers, lacquers, printing inks and man-made fibers. | |
| Eutex KSN | Eutec Chemical Co., Ltd. | Eutex KSN is a yellow crystalline powder used as an optical brightener that provides white effects with neutral to bluish violet shade and excellent light fastness. It is suited for brightening of synthetic high polymers at any processing stage including ...展開 Eutex KSN is a yellow crystalline powder used as an optical brightener that provides white effects with neutral to bluish violet shade and excellent light fastness. It is suited for brightening of synthetic high polymers at any processing stage including printing inks and paints while requiring relatively small quantities. 收起 | |
| Eutex OB | Eutec Chemical Co., Ltd. | Eutex OB is a pale yellow-green fine powder of 2,2'-(2,5-Thiophenediyl)bis[5-tert-butylbenzoxazole] with a melting point between 197-203℃. This product is used as an optical brightener recommended for a variety clear lacquers, UV coatings and printing ink...展開 Eutex OB is a pale yellow-green fine powder of 2,2'-(2,5-Thiophenediyl)bis[5-tert-butylbenzoxazole] with a melting point between 197-203℃. This product is used as an optical brightener recommended for a variety clear lacquers, UV coatings and printing inks. 收起 | |
| F-100 Polyaldehyde Resin | Yueyang Dongrun Chemical Co., Ltd. 岳阳东润化工有限公司 | F-100 Polyaldehyde resin is a condensation product from aliphatic and urea which is bright and resistant to hydrolysis. Polyaldehyde resins are best suited for ink, coatings, and pigment pastes. It has a Color Number of (ISO 4630-1:2004). | |
| F-80 Polyaldehyde Resin | Yueyang Dongrun Chemical Co., Ltd. 岳阳东润化工有限公司 | F-80 Polyaldehyde resin is a condensation product from aliphatic and urea which is bright and resistant to hydrolysis. Polyaldehyde resins are best suited for ink, coatings, and pigment pastes. It has a Color Number of (ISO 4630-1:2004). | |
| FluoroSLIP® 225 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 低分子量聚乙烯和聚四氟乙烯混合物。用於溶劑型和水性油墨 | |
| FluoroSLIP® 421 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 421 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 421 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 511 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 細粒徑的高分子量聚乙烯和聚四氟乙烯混合物，可為配方提供出色的耐磨性和良好的滑爽度。用於膠印、UV和鐵皮印刷油墨和套印清漆 | |
| FluoroSLIP® 515 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 515 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 515 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 533 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 533 is a hydrophilic polyethylene wax and PTFE blend where the polyethylene wax shows a uniform melting range peaking at 97°C. FluoroSLIP® 533 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 605 (PTFE / Polytheylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 高分子量聚乙烯和聚四氟乙烯混合物，可提供較好的耐摩擦，耐磨和抗磨損性能，不提供滑爽度 | |
| FluoroSLIP® 731MG (PTFE / Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 細微粉化，高熔點蠟合金粉末和聚四氟乙烯混合物。可增加潤滑度、硬度、抗粘連性能和抗磨損以及耐磨性能。應用於溶劑型和水性油墨中 | |
| FluoroSPERSE® 153V (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 穩定的50%微粉化聚四氟乙烯乳液，用於通用型平版印刷油墨體系。用於熱固平版印刷油墨。可結合聚乙烯提高抗磨損性能 | |
| FluoroSPERSE® 6153V (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 6153V is a micronized PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 6153V is recommended for use in offset inks. | |
| FluoroSPERSE® 755 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 755 is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 755 is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 7908 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 7908 is a PTFE (polytetrafluoroethylene) micropowder dispersion in a lithographic varnish. | |
| FluoroSPERSE® 8233 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 8233 is a dispersion of polytetrafluoroethylene (PTFE) micropowder in a soya alkyd vehicle. | |
| FluoroSPERSE® 966 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 966 is a PTFE (polytetrafluoroethylene) dispersion in a petrolatum and soya alkyd drying oil. FluoroSPERSE® 966 is recommended for offset and heat set inks. | |
| FluoroSPERSE® UV 808 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® UV 808 is a 40% dispesion of PTFE (polytetrafluoroethylene) in TRPGDA monomer. | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| H0201 | Long Kou Windstar Chemical Co., Ltd. | H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0301 | Long Kou Windstar Chemical Co., Ltd. | H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0601 | Long Kou Windstar Chemical Co., Ltd. | H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0801 | Long Kou Windstar Chemical Co., Ltd. | H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0806 | Long Kou Windstar Chemical Co., Ltd. | H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0901 | Long Kou Windstar Chemical Co., Ltd. | H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0902 | Long Kou Windstar Chemical Co., Ltd. | H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0903 | Long Kou Windstar Chemical Co., Ltd. | H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0904 | Long Kou Windstar Chemical Co., Ltd. | H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0905 | Long Kou Windstar Chemical Co., Ltd. | H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0906 | Long Kou Windstar Chemical Co., Ltd. | H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| HHR-120 Polyketone Resin | Yueyang Dongrun Chemical Co., Ltd. 岳阳东润化工有限公司 | HHR-120 Polyketone Resin is a kind of hard resin with high photostability. It is soluble in any solvent used in the coating industry, except for fatty alkane and water. This product can be mixed and solved with many resins used in paints and inks. LHR-120...展開 HHR-120 Polyketone Resin is a kind of hard resin with high photostability. It is soluble in any solvent used in the coating industry, except for fatty alkane and water. This product can be mixed and solved with many resins used in paints and inks. LHR-120 Polyketone Resin can greatly increase glossiness, adhesion, pigment wettability, hardness of surface layer, and increase the system's solid content. This product has a hydroxy value of 150 mgKOH/g or more. 收起 | |
| Hydrocer 257 (Polyethylene Wax Disperison) | Shamrock Technologies, Inc. 三叶科技 | 50%水性低分子量聚乙烯蠟乳液。可提供良好的耐摩擦性能和滑爽度 | |
| Hydrocer 357 (Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 50%水性高分子量聚乙烯蠟乳液。可提供良好的耐摩擦性能和滑爽度 | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer 7206 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer DP-69 (Paraffin Wax Microdispersion) | Shamrock Technologies, Inc. 三叶科技 | 水性50%固體石蠟微粒分散乳液。用於水性油墨和涂料中，可提供良好的表面滑爽度和憎水性。 | |
| Hydrocer EE 95 (Polyethylene Wax Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 陰離子，高密度聚乙烯乳液。可改善水性油墨、涂料和套印清漆的耐磨性能和滑爽度。也可大大改善抗劃傷和耐膠印性能，以及滑動角結果 | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 石蠟的水性乳液。用於水性油墨和涂料中，具有出色的耐水性 | |
| Hydrocer ER 77 (Polypropylene Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 非離子型聚丙烯乳液。推薦作為水性油墨和涂料的防滑劑 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Isopropyl Acetate | Yueyang Dongrun Chemical Co., Ltd. 岳阳东润化工有限公司 | Isopropyl Acetate is a kind of liquid which smells like fruit, has no color and easily can be lighted. The speed of its vaporization is fast. It could be dissolved with ethanol, ketone, aether and other solvents, so it is called the “omnipotent solvent.” ...展開 Isopropyl Acetate is a kind of liquid which smells like fruit, has no color and easily can be lighted. The speed of its vaporization is fast. It could be dissolved with ethanol, ketone, aether and other solvents, so it is called the “omnipotent solvent.” It has a wide variety of uses, including as a solvent of coating, a dehydrating agent of acetic acid, in the medical industry, tobacco industry, and for high-end printing ink. 收起 | |
| Leuco Crystal Violet | Eutec Chemical Co., Ltd. | Leuco Crystal Violet or Tris(4-dimethylaminophenyl) methane is a clear solution white crystalline powder. This product is used as an indicator dye for radiation-curable imaging systems. | |
| LHR-120 Polyketone Resin | Yueyang Dongrun Chemical Co., Ltd. 岳阳东润化工有限公司 | LHR-120 Polyketone Resin is a kind of hard resin with high photostability. It is soluble in any solvent used in the coating industry, except for fatty alkane and water. This product can be mixed and solved with many resins used in paints and inks. LHR-120...展開 LHR-120 Polyketone Resin is a kind of hard resin with high photostability. It is soluble in any solvent used in the coating industry, except for fatty alkane and water. This product can be mixed and solved with many resins used in paints and inks. LHR-120 Polyketone Resin can greatly increase glossiness, adhesion, pigment wettability, hardness of surface layer, and increase the system's solid content. This product has a hydroxy value of 60 mgKOH/g or more. 收起 | |
| LLR-80 Polyketone Resin | Yueyang Dongrun Chemical Co., Ltd. 岳阳东润化工有限公司 | LLR-80 Polyketone Resin is a condensation product from cyclohexanone which is bright and resistant to hydrolysis. Polyketone resins are best suited for ink, coatings, and pigment pastes. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Neptune 1-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | Neptune 1 N1是一種中等分子量的聚乙烯蠟。具有出色的滑爽性及良好的耐磨損性和耐指甲劃傷性能。在配方中極其穩定，有助於防止消泡劑析出。 | |
| Neptune 1-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | Neptune 1-N5 is a water dispersible grade of polyethylene wax showing melting peaks ranging from 93 – 106°C. Neptune 1-N5 is recommended for water based inks. | |
| Neptune 5223 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 氧化聚乙烯蠟。易分散於水性體系中，產生最少的泡沫。用於水性油墨 | |
| Photocure 1100 | Eutec Chemical Co., Ltd. | Photocure 1100 is a pale yellow powder and an efficient photoinitiator suitable for imaging applications in color filter resists & resists for production of black matrix, column spacers, overcoats & passivation films of liquid crystal displays. However, ...展開 Photocure 1100 is a pale yellow powder and an efficient photoinitiator suitable for imaging applications in color filter resists & resists for production of black matrix, column spacers, overcoats & passivation films of liquid crystal displays. However, this product also has temperature process characteristics, absorption properties and exhibits curing performance in highly pigmented resist formulations with only a low concentration necessary. 收起 | |
| Photocure 2240 | Eutec Chemical Co., Ltd. | Photocure 2240 is a white to off-white crystalline powder of o-methyl benzoyl benzoate with a melting point between 48-54℃. This product is an odorless photosensitizer for UV-curable systems. | |
| Photocure 251 | Eutec Chemical Co., Ltd. | Photocure 251 is 4-Chlorobenzophenone and a white to off-white crystalline powder used as an odorless photosensitizer for UV-curable systems. This product has a melting point between 75-77℃. | |
| Photocure 2959 | Eutec Chemical Co., Ltd. | Photocure 2959 is a white powder and a non-yellowing photoinitiator for UV-curable systems. This product is commonly used when little odor is required and for water-borne UV-curable systems. In addition, an active hydroxyl group can be reacted with suita...展開 Photocure 2959 is a white powder and a non-yellowing photoinitiator for UV-curable systems. This product is commonly used when little odor is required and for water-borne UV-curable systems. In addition, an active hydroxyl group can be reacted with suitable functionalized unsaturated resins. 收起 | |
| Photocure 304 (BMS) | Eutec Chemical Co., Ltd. | Photocure 304 (BMS) is a white crystalline powder with a 73-85℃ melting point. This product is an efficient photoinitiator used in UV-curable printing inks, wood varnishes, decorative coatings for metal cans, clear lacquers, pigmented coatings. | |
| Photocure 369 | Eutec Chemical Co., Ltd. | Photocure 369 is a clear solution light yellow crystalline powder with a melting point between 110-119℃. This product is used an an efficient photoinitiator for non-white pigmented UV-curable systems. | |
| Photocure 393 | Eutec Chemical Co., Ltd. | Photocure 393 is a white crystalline powder of tribromomethyl phenylsulfone with a melting point of 142℃. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist, photo resist and other functions...展開 Photocure 393 is a white crystalline powder of tribromomethyl phenylsulfone with a melting point of 142℃. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist, photo resist and other functions. 收起 | |
| Photocure 400 | Eutec Chemical Co., Ltd. | Photocure 400 is an orange crystalline powder of 1,3-Bis(p-dimethylaminobenzylidene) acetone. This product is an efficient photosensitizer for a bimolecular visible light photosensitive imaging systems. It has a maximum absorption of 450 nm and can sensit...展開 Photocure 400 is an orange crystalline powder of 1,3-Bis(p-dimethylaminobenzylidene) acetone. This product is an efficient photosensitizer for a bimolecular visible light photosensitive imaging systems. It has a maximum absorption of 450 nm and can sensitize a photoinitiator to shift to 405 nm absorption. 收起 | |
| Photocure 4196 | Eutec Chemical Co., Ltd. | Photocure 4196 is a white to off-white crystalline flake of 4-Methylbenzophenone with a melting point between 55-57℃. This product is used as a photoinitiator for UV-cured coatings, inks & resists. | |
| Photocure 50 | Eutec Chemical Co., Ltd. | Photocure 50 or 2-Hydroxy-2-methyl-phenyl-propane-1-one is a clear solution light yellow and transparent liquid. This product is used as an efficient photoinitiator for UV-curable systems to provide non-yellowing. | |
| Photocure 51 | Eutec Chemical Co., Ltd. | Photocure 51 is benzil dimethylketal and a white crystalline solid. This product is a highly efficient photoinitiator for UV-curable systems. | |
| Photocure 550 | Eutec Chemical Co., Ltd. | Photocure 550 is a slightly yellow liquid of Methyl Benzoylformate. This product is an efficient photo initiator for UV-curable systems that provides non-yellowing durability and longer shelf life for UV-curable systems. | |
| Photocure 784 | Eutec Chemical Co., Ltd. | Photocure 784 is a yellow to orange powder with a melting point of 160-170℃. This product is an efficient photoinitiator for pigmented UV-curable systems, photoresists and printing plates | |
| Photocure 81 | Eutec Chemical Co., Ltd. | Photocure 81 is liquid benzophenone and a low viscosity clear and light yellow oily liquid photoinitiator at room temperature. This product has good efficiency, complete solubility and is easily combined making it useful for UV-curable systems to replace ...展開 Photocure 81 is liquid benzophenone and a low viscosity clear and light yellow oily liquid photoinitiator at room temperature. This product has good efficiency, complete solubility and is easily combined making it useful for UV-curable systems to replace Benzophenone, especially for formulations of UV inks & resists. 收起 | |
| Photocure 819 | Eutec Chemical Co., Ltd. | Photocure 819 is a yellow crystalline powder of Bis(2,4,6-trimethylbenzoyl)-phenylphosphineoxide. This product has a melting point between 127-133℃ and is used as an efficient photoinitiator for UV-curable systems. |
