| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| AFCONA - 2020 | AFCONA Additives Sdn Bhd | AFCONA – 2020 is a silicone-free modified polyvinyl polymer in a SBP spirit solvent. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, and finds application in solvent-based coatings, printing inks, and th...展開 AFCONA – 2020 is a silicone-free modified polyvinyl polymer in a SBP spirit solvent. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, and finds application in solvent-based coatings, printing inks, and thermosetting resin systems. 收起 | |
| AFCONA - 2040 | AFCONA Additives Sdn Bhd | AFCONA – 2040 is a silicone-containing defoamer with fluorocarbon in a diisobutyl ketone solvent. This clear liquid is compatible with most resin systems and prevents the formation of foam and blisters during manufacture and application with minimal side ...展開 AFCONA – 2040 is a silicone-containing defoamer with fluorocarbon in a diisobutyl ketone solvent. This clear liquid is compatible with most resin systems and prevents the formation of foam and blisters during manufacture and application with minimal side effects. AFCONA – 2040 finds application in low to high polar paint systems, physical drying systems based on acrylic, vinyl, or chlorinated polymers, in polyurethane wood, plastic, and car refinishes, in airless spraying coats, in NC lacquers and acid curing wood and general industrial coatings, in stoving paints, in solvent-based epoxy systems, and in printing inks. 收起 | |
| AFCONA - 2503 | AFCONA Additives Sdn Bhd | AFCONA – 2503 is an organically modified polysiloxane appeating as a transparent to slightly yellow liquid. This product functions as a water-based defoamer and anti-foaming agent which provides levelling and crater-resistant properties in water-based coa...展開 AFCONA – 2503 is an organically modified polysiloxane appeating as a transparent to slightly yellow liquid. This product functions as a water-based defoamer and anti-foaming agent which provides levelling and crater-resistant properties in water-based coatings and high shear applications such as pigment concentrate preparations. AFCONA – 2503 finds application in high speed flexo printing processes, polyurethane dispersions, acrylic-based decorative paints, and printing inks. 收起 | |
| AFCONA - 2524 | AFCONA Additives Sdn Bhd | AFCONA – 2524 is a silicone-containing defoamer in a water and hydrocarbon solvent. This white to slightly yellow emulsion functions as a defoamer in water-based polyurethane and acrylic-based emulsions. AFCONA – 2524 can be used as a levelling agent and ...展開 AFCONA – 2524 is a silicone-containing defoamer in a water and hydrocarbon solvent. This white to slightly yellow emulsion functions as a defoamer in water-based polyurethane and acrylic-based emulsions. AFCONA – 2524 can be used as a levelling agent and is easy to incorporate under low shear forces, finding application in coatings and printing inks. 收起 | |
| AFCONA - 2720 | AFCONA Additives Sdn Bhd | AFCONA – 2720 is a silicone-free polymer in an alkylbenzene and SBP spirit solvent. This slightly yellow liquid functions as an anti-foam and de-aeration additive for use in unsaturated polyesters, coil and can coatings, two-pack epoxies, polyester/melami...展開 AFCONA – 2720 is a silicone-free polymer in an alkylbenzene and SBP spirit solvent. This slightly yellow liquid functions as an anti-foam and de-aeration additive for use in unsaturated polyesters, coil and can coatings, two-pack epoxies, polyester/melamine stoving systems, PVC compounds, and printing inks. 收起 | |
| AFCONA - 2721 | AFCONA Additives Sdn Bhd | AFCONA – 2721 is a silicone-based defoamer in a 2-ethylhexylacrylate solvent. This clear to slightly yellow liquid functions as an anti-foam, de-aerating, cross-linking agent that does not provide haziness and has wide compatibility. AFCONA – 2721 finds a...展開 AFCONA – 2721 is a silicone-based defoamer in a 2-ethylhexylacrylate solvent. This clear to slightly yellow liquid functions as an anti-foam, de-aerating, cross-linking agent that does not provide haziness and has wide compatibility. AFCONA – 2721 finds application in ultraviolet coatings, in pigmented or non-pigmented resin systems, and in printing inks. 收起 | |
| AFCONA - 3033 | AFCONA Additives Sdn Bhd | AFCONA – 3033 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3033 finds applica...展開 AFCONA – 3033 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3033 finds application in wood and clear coatings, thermoplastic resins, NC, acid curing, polyurethanes, and in printing inks. 收起 | |
| AFCONA - 3231 | AFCONA Additives Sdn Bhd | AFCONA – 3231 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive mainly used in metal and ultraviolet coatings while visually enhancing film thickness. AFCONA – 3231 finds appl...展開 AFCONA – 3231 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive mainly used in metal and ultraviolet coatings while visually enhancing film thickness. AFCONA – 3231 finds application in metal coatings such as industrial baking systems, car refinish polyurethane top clear coats, and in printing inks. 收起 | |
| AFCONA - 3250 | AFCONA Additives Sdn Bhd | AFCONA – 3250 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, has transparency, and can be used in all solvent-based systems where slip is desired and foam sta...展開 AFCONA – 3250 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, has transparency, and can be used in all solvent-based systems where slip is desired and foam stabilization is not. AFCONA – 3250 finds application in wood coating systems including NC, acid curing, polyurethane and ultraviolet, top coats in plastic coatings application, refinish topcoats based on polyurethane, ultraviolet coatings, and printing inks. 收起 | |
| AFCONA - 3280 | AFCONA Additives Sdn Bhd | AFCONA – 3280 is a special organically modified polysiloxane. This clear to slightly yellow liquid is soluble in aliphatic and aromatic hydrocarbons, esters, and ketones, and insoluble in water. It functions as a moderate slip, anti-foam, and de-aeration ...展開 AFCONA – 3280 is a special organically modified polysiloxane. This clear to slightly yellow liquid is soluble in aliphatic and aromatic hydrocarbons, esters, and ketones, and insoluble in water. It functions as a moderate slip, anti-foam, and de-aeration additive with an anti-floating effect, while improving surface leveling and smoothness without causing intercoat adhesion. AFCONA – 3280 provides hot water resistance, and finds application in stoving enamels based on alkyd- , acrylic-, or polyester resins, in acid curing and polyurethane wood coatings, in self-leveling epoxy flooring compounds, and in ultraviolet-curing inks and coatings. 收起 | |
| AFCONA - 3670 | AFCONA Additives Sdn Bhd | AFCONA – 3670 is a fluorocarbon modified polyacrylic. This clear to slightly yellow liquid functions as a leveling, anti-crater, and substrate wetting agent that manages surface control and lowers surface tension. AFCONA – 3670 acts as an anti-foam and de...展開 AFCONA – 3670 is a fluorocarbon modified polyacrylic. This clear to slightly yellow liquid functions as a leveling, anti-crater, and substrate wetting agent that manages surface control and lowers surface tension. AFCONA – 3670 acts as an anti-foam and de-aeration aid, does not interfere with intercoat adhesion, and finds application in solvent-based coatings such as baking paints, polyurethane coatings, epoxies, and printing inks. 收起 | |
| AFCONA - 3770 | AFCONA Additives Sdn Bhd | AFCONA – 3770 is a fluorocarbon modified acrylic polymer. This clear to slightly yellow liquid functions as a leveling agent with anti-foam, anti-crater, and de-aeration properties while improving substrate wetting, and without interfering with intercoat ...展開 AFCONA – 3770 is a fluorocarbon modified acrylic polymer. This clear to slightly yellow liquid functions as a leveling agent with anti-foam, anti-crater, and de-aeration properties while improving substrate wetting, and without interfering with intercoat adhesion. AFCONA – 3770 finds application in two-pack polyurethane and epoxy coatings, air-drying alkyd paints, baking enamels such as coil and can coatings, matt finish wood coatings, and in printing inks. 收起 | |
| AFCONA - 3772 | AFCONA Additives Sdn Bhd | AFCONA – 3772 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid functions as a leveling and surface tension reduction agent that increases the polarity of the polymer, making it compatible with common resins used in coatings. I...展開 AFCONA – 3772 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid functions as a leveling and surface tension reduction agent that increases the polarity of the polymer, making it compatible with common resins used in coatings. It provides no in-can haziness, anti-flooding and floating properties, prevents craters and orange peel, and helps improve substrate wetting performance. AFCONA – 3772 finds application in aqueous and non-aqueous coatings, solvent-based coatings, high gloss clear coatings, pigmented and matted primers, and in printing inks. 收起 | |
| AFCONA - 4047 | AFCONA Additives Sdn Bhd | AFCONA – 4047 is a modified polyurethane polymer in a butylacetate, methoxy propyl acetate, and sec-butanol solution. This product is a high molecular weight polymeric dispersant for the deflocculation of pigments, and provides improved gloss and DOI, red...展開 AFCONA – 4047 is a modified polyurethane polymer in a butylacetate, methoxy propyl acetate, and sec-butanol solution. This product is a high molecular weight polymeric dispersant for the deflocculation of pigments, and provides improved gloss and DOI, reduced flooding, color strength, and low viscosity. AFCONA – 4047 finds application in high quality coatings such as OEM’s, refinishes, can coating, and coil coatings, and in printing inks. 收起 | |
| AFCONA - 4071 | AFCONA Additives Sdn Bhd | AFCONA – 4071 is a modified polyurethane polymer in a butylacetate, methoxy propyl acetate, sec-butanol, and xylene solution. This product functions as a high molecular weight polymeric dispersant for pigments to increase the stability and performance of ...展開 AFCONA – 4071 is a modified polyurethane polymer in a butylacetate, methoxy propyl acetate, sec-butanol, and xylene solution. This product functions as a high molecular weight polymeric dispersant for pigments to increase the stability and performance of tinting strength and color brightness, and in carbon blacks to provide blue undertones with high jetness. AFCONA – 4071 finds application in paints, coatings, and printing inks. 收起 | |
| AFCONA - 4201 | AFCONA Additives Sdn Bhd | AFCONA – 4201 is a modified polyurethane polymer that functions as a high molecular weight polymeric dispersant for the deflocculation of pigments. This product provides improved steric hindrance, pigment stability, color, gloss, and is almost 100% solven...展開 AFCONA – 4201 is a modified polyurethane polymer that functions as a high molecular weight polymeric dispersant for the deflocculation of pigments. This product provides improved steric hindrance, pigment stability, color, gloss, and is almost 100% solvent free. AFCONA – 4201 is suitable for use in polyurethane, epoxy, polyester/melanine, alkyd/melanine, acid curing, NC, and ultraviolet systems, finding application in high solid coatings, and ink formulations. 收起 | |
| AFCONA - 4530 | AFCONA Additives Sdn Bhd | AFCONA – 4530 is a modified polyurethane polymer in a solution of water. This product functions as a high molecular weight, pH independent polymeric dispersant for the deflocculation and stabilization of organic and inorganic pigments. AFCONA – 4530 is VO...展開 AFCONA – 4530 is a modified polyurethane polymer in a solution of water. This product functions as a high molecular weight, pH independent polymeric dispersant for the deflocculation and stabilization of organic and inorganic pigments. AFCONA – 4530 is VOC free and provides increased color strength, pigment stability, color development, and less foam formation, finding application in water-based coatings, decorative and industrial paints, and printing inks. 收起 | |
| AFCONA - 4570 | AFCONA Additives Sdn Bhd | AFCONA – 4570 is a modified polyacrylate polymer in a tripropylene glycol methyl ether (TPM) solution. This product functions as a high molecular weight dispersing agent for color acceptance and resin free pigment concentrate preparations. It stabilizes c...展開 AFCONA – 4570 is a modified polyacrylate polymer in a tripropylene glycol methyl ether (TPM) solution. This product functions as a high molecular weight dispersing agent for color acceptance and resin free pigment concentrate preparations. It stabilizes carbon blacks and inorganic and organic pigments while providing stability performance, gloss, color strength, and improved color acceptance. AFCONA – 4570 finds application in water and solvent-based decorative and industrial coatings, and in printing inks. 收起 | |
| AFCONA - 5207 | AFCONA Additives Sdn Bhd | AFCONA – 5207 is a hydroxyl functional unsaturated modified carboxylic acid with pigment affinity groups appearing as a transparent yellow to brown liquid. AFCONA – 5207 functions as a wetting and dispersing additive for solvent -based architectural and d...展開 AFCONA – 5207 is a hydroxyl functional unsaturated modified carboxylic acid with pigment affinity groups appearing as a transparent yellow to brown liquid. AFCONA – 5207 functions as a wetting and dispersing additive for solvent -based architectural and decorative paints, as a dispersant for printing inks, and in thermoplastic acrylics, NC combinations, acid curing systems, and baking paints. 收起 | |
| AFCONA - 5280 | AFCONA Additives Sdn Bhd | AFCONA – 5280 is a cationic and anionic co-polymer with pigment affinity groups. This dark brown liquid functions as a wetting and dispersing additive for solvent-based paints, and as an economic pigment stabilizer. AFCONA – 5280 finds application in alky...展開 AFCONA – 5280 is a cationic and anionic co-polymer with pigment affinity groups. This dark brown liquid functions as a wetting and dispersing additive for solvent-based paints, and as an economic pigment stabilizer. AFCONA – 5280 finds application in alkyd based systems such as NC, stoving paints, and air-drying alkyds, and in oil and solvent-based printing inks. 收起 | |
| AFCONA - 5285 | AFCONA Additives Sdn Bhd | AFCONA – 5285 is an anionic co-polymer with acidic groups. This yellow to dark brown liquid functions as a wetting and dispersing additive for solvent-based paints. AFCONA – 5285 provides anchoring in base pigments for inorganic pigments and matting agent...展開 AFCONA – 5285 is an anionic co-polymer with acidic groups. This yellow to dark brown liquid functions as a wetting and dispersing additive for solvent-based paints. AFCONA – 5285 provides anchoring in base pigments for inorganic pigments and matting agents, and reduces viscosity in filler and extender dispersions, finding application in oil and solvent-based printing inks in alcohol rich systems. 收起 | |
| AFCONA - 5290 | AFCONA Additives Sdn Bhd | AFCONA – 5290 is a polymer with pigment affinity groups. This product consists of high molecular weight dispersants and is used for high solid systems and formulations and provides pigment stability, performance, and color strength. AFONCA – 5290 finds ap...展開 AFCONA – 5290 is a polymer with pigment affinity groups. This product consists of high molecular weight dispersants and is used for high solid systems and formulations and provides pigment stability, performance, and color strength. AFONCA – 5290 finds application in solvent-based systems from low to high polarity including air dry alkyds, in high solid coatings such as polyurethane, epoxy, and ultraviolet coatings, and as a dispersant for ink formulations. 收起 | |
| AFCONA - 6225 | AFCONA Additives Sdn Bhd | AFCONA – 6225 is a fatty acid modified polyester that functions as a dispersant and emulsifier for universal colorants while performing as a color acceptance additive. This dark brown liquid functions as a dispersing agent in decorative paints, finding ap...展開 AFCONA – 6225 is a fatty acid modified polyester that functions as a dispersant and emulsifier for universal colorants while performing as a color acceptance additive. This dark brown liquid functions as a dispersing agent in decorative paints, finding application as an emulsifier of water into solvent-based coatings, as an activator for bentonites and acrylic thickeners, and in printing inks. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Chlorinated Rubber TR1-CR-1 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展開 Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-2 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine...展開 Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-3 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marin...展開 Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-4 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展開 Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| H0201 | Long Kou Windstar Chemical Co., Ltd. | H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0301 | Long Kou Windstar Chemical Co., Ltd. | H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0601 | Long Kou Windstar Chemical Co., Ltd. | H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0801 | Long Kou Windstar Chemical Co., Ltd. | H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0806 | Long Kou Windstar Chemical Co., Ltd. | H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0901 | Long Kou Windstar Chemical Co., Ltd. | H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0902 | Long Kou Windstar Chemical Co., Ltd. | H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0903 | Long Kou Windstar Chemical Co., Ltd. | H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0904 | Long Kou Windstar Chemical Co., Ltd. | H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0905 | Long Kou Windstar Chemical Co., Ltd. | H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0906 | Long Kou Windstar Chemical Co., Ltd. | H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Lemon Chrome | Unilex Colours & Chemicals Ltd. | Lemon Chrome is a yellow chrome pigment. This product has high color strength and highly soluble properties. It has a specific gravity of 5 and a pH of 5-7, and is suitable for dispersions, printing inks, protective coatings, and liquid inks. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Middle Chrome | Unilex Colours & Chemicals Ltd. | Middle Chrome is a yellow chrome pigment. This product has high color strength and highly soluble properties, and it has a specific gravity of 5 and a pH of 5-7. It is often used in printing inks, liquid ink, and protective coatings. | |
| Milecell 60 HPMC | MPI Chemie B.V. | Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water ...展開 Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 65 HPMC | MPI Chemie B.V. | Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water ...展開 Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 75 HPMC | MPI Chemie B.V. | Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water ...展開 Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell EC Standard | MPI Chemie B.V. | Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and c...展開 Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| MPI Bright 100 | MPI Chemie B.V. | MPI Bright 100 is an optical brightener in the form of a yellowish powder. It is used as a whitening agent in paints and inks. MPI Bright 100 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 200 | MPI Chemie B.V. | MPI Bright 200 is an optical brightener in the form of a bright yellow crystal powder. It is used as a whitening agent in paints and inks. MPI Bright 200 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 300 | MPI Chemie B.V. | MPI Bright 300 is an optical brightener in the form of a yellowish-green powder. It is used as a whitening agent in paints and inks. MPI Bright 300 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 420 | MPI Chemie B.V. | MPI Bright 420 is an optical brightener in the form of a yellowish green crystalline powder. It is used as a whitening agent in paints and inks. MPI Bright 420 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 450 | MPI Chemie B.V. | MPI Bright 450 is an optical brightener in the form of a yellowish green crystalline powder. It is used as a whitening agent in paints and inks. MPI Bright 450 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright CBS-X | MPI Chemie B.V. | MPI Bright CBS-X is an optical brightener in the form of a yellowish crystal powder. It is used as a whitening agent in paints and inks. MPI Bright CBS-X is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright ER-1 | MPI Chemie B.V. | MPI Bright ER-1 is an optical brightener in the form of a yellowish crystal powder. It is used as a whitening agent in paints and inks. MPI Bright ER-1 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright ER-2 | MPI Chemie B.V. | MPI Bright ER-2 is an optical brightener in the form of a pale yellow powder. It is used as a whitening agent in paints and inks. MPI Bright ER-2 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright ER-3 | MPI Chemie B.V. | MPI Bright ER-3 is an optical brightener in the form of a yellowish green crystal powder. It is used as a whitening agent in paints and inks. MPI Bright ER-3 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright FP 127 | MPI Chemie B.V. | MPI Bright FP 127 is an optical brightener in the form of a light yellow powder. It is used as a whitening agent in paints and inks. MPI Bright FP 127 is designed to brighten colors and mask yellowing in desired applications. | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurene IR 51 K | S.A.P.I.C.I. SpA | Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product prime...展開 Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product primer or overprint varnishes. 收起 | |
| Polurene OK K | S.A.P.I.C.I. SpA | Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties. | |
| Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...展開 Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. 收起 | |
| Polurene T 70 AE | S.A.P.I.C.I. SpA | Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings w...展開 Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings with good chemical and weather resistance. This product contains less than .5% IPDI isocyanates. 收起 | |
| Polurgreen FP75-01 | S.A.P.I.C.I. SpA | Polurgreen FP75-01 is a polyurethane adduct. This product contains less than .1% TDI isocyanates. It may be used in 2K adhesives and inks. Polurgreen FP75-01 is in accord with EU, BFR, and FDA regulations for food packaging. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| Prime Rose Chrome | Unilex Colours & Chemicals Ltd. | Prime Rose Chrome is a yellow chrome pigment. This product has high color strength and highly soluble properties, and it has a specific gravity of 5 and a pH of 5-7. It is often used in printing inks, liquid ink, and protective coatings. | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起 | |
| Rexin K 1939 | S.A.P.I.C.I. SpA | Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...展開 Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. 收起 | |
| Rexin K 411 | S.A.P.I.C.I. SpA | Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for ...展開 Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for prolonged and continuous use. 收起 | |
| Rexin K 6258 | S.A.P.I.C.I. SpA | Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes. | |
| Rexin K 6302 | S.A.P.I.C.I. SpA | Rexin K 6302 is a polyester resin. This product is soluble in ethyl acetate. It can be used in the formulation of inks and overprint varnishes. | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起 | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起 | |
| Scarlet Chrome | Unilex Colours & Chemicals Ltd. | Scarlet Chrome is a red chrome pigment. This product has high color strength and highly soluble properties, and it has a specific gravity of 6 and a pH of 5-7. It is often used in printing inks, liquid ink, and protective coatings. | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起 | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起 | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起 | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起 | |
| Synthetic Black Oxide | Unilex Colours & Chemicals Ltd. | Synthetic Black Oxide is a black inorganic pigment. This product has a specific gravity of 3.5-5.5 and a pH of 5-8. It is non-toxic and durable, and is suitable for inks, paints, and coatings. | |
| Synthetic Orange Oxide | Unilex Colours & Chemicals Ltd. | Synthetic Orange Oxide is an orange inorganic pigment. This product has a specific gravity of 3.5-5.5 and a pH of 3-7. It is non-toxic and durable, and is suitable for paints, coatings, and inks. | |
| Synthetic Red Oxide | Unilex Colours & Chemicals Ltd. | Synthetic Red Oxide is a red inorganic pigment. This product has a specific gravity of 4 and a pH of 5-7. It is non-toxic and durable, and is suitable for paints, coatings, and inks. | |
| Synthetic Yellow Oxide | Unilex Colours & Chemicals Ltd. | Synthetic Yellow Oxide is a yellow inorganic pigment. This product has a specific gravity of 4 and a pH of 4-7. It is non-toxic and durable, and is suitable for paints, coatings, and inks. | |
| Ucopol M 33/65 K | S.A.P.I.C.I. SpA | Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overpr...展開 Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overprint varnishes and flexographic processes. 收起 | |
| Ucopol OL 100 | S.A.P.I.C.I. SpA | Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing ink...展開 Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing inks and pigmented pastes. This product has been obtained from renewable raw materials. 收起 |
