| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| H0201 | Long Kou Windstar Chemical Co., Ltd. | H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0301 | Long Kou Windstar Chemical Co., Ltd. | H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0601 | Long Kou Windstar Chemical Co., Ltd. | H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0801 | Long Kou Windstar Chemical Co., Ltd. | H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0806 | Long Kou Windstar Chemical Co., Ltd. | H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0901 | Long Kou Windstar Chemical Co., Ltd. | H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0902 | Long Kou Windstar Chemical Co., Ltd. | H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0903 | Long Kou Windstar Chemical Co., Ltd. | H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0904 | Long Kou Windstar Chemical Co., Ltd. | H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0905 | Long Kou Windstar Chemical Co., Ltd. | H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0906 | Long Kou Windstar Chemical Co., Ltd. | H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起 | |
| R-730 TiO2 | Boom Industry (SH) Co., Ltd. | R-730 TiO2 is a stable universal rutile titanium dioxide used for its versatility, durability, hiding power and gloss. This product can be applied to senior industrial coating that requires high weather resistance, paints and inks. | |
| R-750 TiO2 | Boom Industry (SH) Co., Ltd. | R-750 TiO2 is a general-purpose product created through a sulfuric acid production process. This product has good dispersion, hiding power, weather resistance and other characteristics. It is commonly used in interior and exterior paints and inks. | |
| R-760 TiO2 | Boom Industry (SH) Co., Ltd. | R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, print...展開 R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, printing inks and different kinds of coatings. 收起 | |
| R-98 TiO2 | Boom Industry (SH) Co., Ltd. | R-98 TiO2 is a chlorination rutile pigment derived from chlorination and oxidation of silicon. This product has good weather resistance, excellent stability and high dispersibility. It is commonly used in coatings and printing inks. | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起 | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起 | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起 | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起 | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起 | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起 | |
| UVB2000 Special Tertiary Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...展開 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 收起 | |
| UVB2200 Reactive Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...展開 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. 收起 | |
| UVE3216 Modified Epoxy Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...展開 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. 收起 | |
| UVU 6451 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications. | |
| UVU6219 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...展開 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. 收起 | |
| UVU6305 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...展開 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. 收起 | |
| UVU6609 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications. | |
| UVU6906 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications. | |
| Yipin® Apple Green Y9435 | Yipin Pigments, Inc. | Yipin® Apple Green Y9435 is a green pearlescent pigment in powder form. It has good heat and light resistance and provides a bright green luster. This product can be used in a variety of coating and ink applications. | |
| Yipin® Blackish Green Y9408 | Yipin Pigments, Inc. | Yipin® Blackish Green Y9408 is a very dark green pearlescent pigment in powder form. It has good heat and light resistance and provides a bright silver luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Blue D7079 | Yipin Pigments, Inc. | Yipin® Blue D7079 is a blue beta phthalocyanine pigment in powder form. It has a pH value of 6.5-8, a density of 1.59 g/cm³, and a specific surface area of 62 m²/g. This product can be use in ink applications. | |
| Yipin® Blue FR6840 | Yipin Pigments, Inc. | Yipin® Blue FR6840 is a blue alpha unstable phthalocyanine pigment in powder form. It has a pH value of 5.8-8, a density of 1.6 g/cm³, and a specific surface area of 66 m²/g. This product can be used in water-based ink applications. | |
| Yipin® Blue Pearl Y9225 | Yipin Pigments, Inc. | Yipin® Blue Pearl Y9225 is a blue pearlescent pigment in powder form. It has good heat and light resistance and provides a bright blue luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Bronze Satin Y9520 | Yipin Pigments, Inc. | Yipin® Bronze Satin Y9520 is a bronze, micaceous iron, pearlescent pigment in powder form. It has good heat and light resistance and provides a satin bronze luster. This product can be used in coating and ink applications. | |
| Yipin® Bronze Y9500 | Yipin Pigments, Inc. | Yipin® Bronze Y9500 is a bronze, micaceous iron, pearlescent pigment in powder form. It has good heat and light resistance and provides a bright bronze luster. This product can be used in coating and ink applications. | |
| Yipin® Bronze-Brown Y9410 | Yipin Pigments, Inc. | Yipin® Bronze-Brown Y9410 is a brown-bronze pearlescent pigment in powder form. It has good heat and light resistance and provides a bright bronze-brown luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Brown-Red Y9502 | Yipin Pigments, Inc. | Yipin® Brown-Red Y9502 is a brown-red, micaceous iron, pearlescent pigment in powder form. It has good heat and light resistance and provides a bright brown-red luster. This product can be used in coating and ink applications. | |
| Yipin® Chrome Orange 115N | Yipin Pigments, Inc. | Yipin® Chrome Orange 115N is an orange-yellow lead chromate pigment in powder form. It has a pH value of 4-8 and is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. | |
| Yipin® Deep Chrome Yellow 124 | Yipin Pigments, Inc. | Yipin® Deep Chrome Yellow 124 is a yellow lead chromate pigment in powder form. It is stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. | |
| Yipin® Fine Gold Satin Y9201 | Yipin Pigments, Inc. | Yipin® Fine Gold Satin Y9201 is a gold pearlescent pigment in powder form. It has good heat and light resistance and provides a satin yellow luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Glitter Bronze Y9530 | Yipin Pigments, Inc. | Yipin® Glitter Bronze Y9530 is a bronze, micaceous iron, pearlescent pigment in powder form. It has good heat and light resistance and provides a shimmery, flashing bronze luster. This product can be used in coating and ink applications. | |
| Yipin® Glitter Gold Y9355 | Yipin Pigments, Inc. | Yipin® Glitter Gold Y9355 is a gold pearlescent pigment in powder form. It has good heat and light resistance and provides a sparkling, flashing golden luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Gold Pearl Y9300 | Yipin Pigments, Inc. | Yipin® Gold Pearl Y9300 is a gold pearlescent pigment in powder form. It has good heat and light resistance and provides a bright pearl golden luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Gold Satin Y9302 | Yipin Pigments, Inc. | Yipin® Gold Satin Y9302 is a gold pearlescent pigment in powder form. It has good heat and light resistance and provides a stain satin golden luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Green Chrome SGC | Yipin Pigments, Inc. | Yipin® Green Chrome SGC is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.3%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be u...展開 Yipin® Green Chrome SGC is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.3%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. 收起 | |
| Yipin® Green Chrome SGC-M | Yipin Pigments, Inc. | Yipin® Green Chrome SGC-M is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.3%, sieve residue of no more than 0.1%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be...展開 Yipin® Green Chrome SGC-M is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.3%, sieve residue of no more than 0.1%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. 收起 | |
| Yipin® Green Chrome SGN | Yipin Pigments, Inc. | Yipin® Green Chrome SGN is a green chrome oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.1%, and a pH value of 6-8. It is very stable with strong tinting capabilities. This product can be use...展開 Yipin® Green Chrome SGN is a green chrome oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.1%, and a pH value of 6-8. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. 收起 | |
| Yipin® Green Chrome SGP | Yipin Pigments, Inc. | Yipin® Green Chrome SGP is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.3%, sieve residue of no more than 0.3%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be u...展開 Yipin® Green Chrome SGP is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.3%, sieve residue of no more than 0.3%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. 收起 | |
| Yipin® Green Pearl Y9235 | Yipin Pigments, Inc. | Yipin® Green Pearl Y9235 is a green pearlescent pigment in powder form. It has a particle size range of 10-60 µm, water soluble content of no more than 0.3%, and a pH value of 6-9. It has good heat and light resistance and provides a bright green luster t...展開 Yipin® Green Pearl Y9235 is a green pearlescent pigment in powder form. It has a particle size range of 10-60 µm, water soluble content of no more than 0.3%, and a pH value of 6-9. It has good heat and light resistance and provides a bright green luster to desired formulations. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black 353 | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 353 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is...展開 Yipin® Iron Oxide Black 353 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black 357 | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 357 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 95%. It is very stable with good tinting capabiliti...展開 Yipin® Iron Oxide Black 357 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 95%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black 370 | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 370 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is v...展開 Yipin® Iron Oxide Black 370 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black 723 | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 723 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is v...展開 Yipin® Iron Oxide Black 723 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black 733J | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 733J is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is ...展開 Yipin® Iron Oxide Black 733J is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black S722A | Yipin Pigments, Inc. | Yipin® Iron Oxide Black S722A is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.1%, iron oxide content of at least 92%, and a predominant particle size of 0.2 µm. It ...展開 Yipin® Iron Oxide Black S722A is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.1%, iron oxide content of at least 92%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black S722J | Yipin Pigments, Inc. | Yipin® Iron Oxide Black S722J is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of 0.5%, iron oxide content of at least 92%, and a predominant particle size of 0.2 µm. It is very stable ...展開 Yipin® Iron Oxide Black S722J is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of 0.5%, iron oxide content of at least 92%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black S733-DG | Yipin Pigments, Inc. | Yipin® Iron Oxide Black S733-DG is a granular, synthetic black iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 3-7, and iron ...展開 Yipin® Iron Oxide Black S733-DG is a granular, synthetic black iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 3-7, and iron oxide content of at least 87%. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black S733-WG | Yipin Pigments, Inc. | Yipin® Iron Oxide Black S733-WG is a granular, synthetic black iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 3-7, and iron ...展開 Yipin® Iron Oxide Black S733-WG is a granular, synthetic black iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 3-7, and iron oxide content of at least 87%. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Brown S610 | Yipin Pigments, Inc. | Yipin® Iron Oxide Brown S610 is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 88%. It is very stable with good tinting capabilit...展開 Yipin® Iron Oxide Brown S610 is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 88%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Brown S660(860) | Yipin Pigments, Inc. | Yipin® Iron Oxide Brown S660(860) is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 94%. It is very stable with good tinting capa...展開 Yipin® Iron Oxide Brown S660(860) is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 94%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Brown S686(868) | Yipin Pigments, Inc. | Yipin® Iron Oxide Brown S686(868) is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 94%. It is very stable with good tinting capa...展開 Yipin® Iron Oxide Brown S686(868) is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 94%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Red S110 | Yipin Pigments, Inc. | Yipin® Iron Oxide Red S110 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 94%, and a predominant particle size of about 0.1 µm. It i...展開 Yipin® Iron Oxide Red S110 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 94%, and a predominant particle size of about 0.1 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Red S120 | Yipin Pigments, Inc. | Yipin® Iron Oxide Red S120 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.1 µm. It ...展開 Yipin® Iron Oxide Red S120 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.1 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Red S130-1 | Yipin Pigments, Inc. | Yipin® Iron Oxide Red S130-1 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.2 µm. I...展開 Yipin® Iron Oxide Red S130-1 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Red S130-DG | Yipin Pigments, Inc. | Yipin® Iron Oxide Red S130-DG is a granular, synthetic red iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 3-7, and iron oxid...展開 Yipin® Iron Oxide Red S130-DG is a granular, synthetic red iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 3-7, and iron oxide content of at least 90%. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Red S130-WG | Yipin Pigments, Inc. | Yipin® Iron Oxide Red S130-WG is a granular, synthetic red iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4.0%, a pH value of 3-7, and iron ox...展開 Yipin® Iron Oxide Red S130-WG is a granular, synthetic red iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4.0%, a pH value of 3-7, and iron oxide content of at least 90%. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Red S140 | Yipin Pigments, Inc. | Yipin® Iron Oxide Red S140 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.3 µm. I...展開 Yipin® Iron Oxide Red S140 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.3 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Red S180 | Yipin Pigments, Inc. | Yipin® Iron Oxide Red S180 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.5 µm. I...展開 Yipin® Iron Oxide Red S180 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.5 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Red S190-1 | Yipin Pigments, Inc. | Yipin® Iron Oxide Red S190-1 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.4 µm....展開 Yipin® Iron Oxide Red S190-1 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.4 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Yellow S313-1 | Yipin Pigments, Inc. | Yipin® Iron Oxide Yellow S313-1 is a synthetic yellow iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 86%. It is very stable with good tinting capab...展開 Yipin® Iron Oxide Yellow S313-1 is a synthetic yellow iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 86%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Yellow S920 | Yipin Pigments, Inc. | Yipin® Iron Oxide Yellow S920 is a synthetic yellow iron oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.1%, and iron oxide content of at least 86%. It is very stable with good tinting capab...展開 Yipin® Iron Oxide Yellow S920 is a synthetic yellow iron oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.1%, and iron oxide content of at least 86%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Yellow S930(313) | Yipin Pigments, Inc. | Yipin® Iron Oxide Yellow S930(313) is a synthetic yellow iron oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.1%, and iron oxide content of at least 86%. It is very stable with good tinting ...展開 Yipin® Iron Oxide Yellow S930(313) is a synthetic yellow iron oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.1%, and iron oxide content of at least 86%. It is very stable with good tinting capabilities and an iron oxide content of 86 percent. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Yellow S930(313)-DG | Yipin Pigments, Inc. | Yipin® Iron Oxide Yellow S930(313)-DG is a granular, synthetic yellow iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 4-7, an...展開 Yipin® Iron Oxide Yellow S930(313)-DG is a granular, synthetic yellow iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 4-7, and iron oxide content of at least 83%. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Yellow S930(313)-WG | Yipin Pigments, Inc. | Yipin® Iron Oxide Yellow S930(313)-WG is a granular, synthetic yellow iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4.0%, a pH value of 4-7, ...展開 Yipin® Iron Oxide Yellow S930(313)-WG is a granular, synthetic yellow iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4.0%, a pH value of 4-7, and iron oxide content of at least 83%. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Yellow S960 | Yipin Pigments, Inc. | Yipin® Iron Oxide Orange S960 is a synthetic orange iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, and iron oxide content of at least 88%. It is very stable with good tinting capab...展開 Yipin® Iron Oxide Orange S960 is a synthetic orange iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, and iron oxide content of at least 88%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Lemon Chrome Yellow 501 | Yipin Pigments, Inc. | Yipin® Lemon Chrome Yellow 501 is a yellow lead chromate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product...展開 Yipin® Lemon Chrome Yellow 501 is a yellow lead chromate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. 收起 | |
| Yipin® Lemon Chrome Yellow 502 | Yipin Pigments, Inc. | Yipin® Lemon Chrome Yellow 502 is a yellow lead chromate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product...展開 Yipin® Lemon Chrome Yellow 502 is a yellow lead chromate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. 收起 | |
| Yipin® Lemon Chrome Yellow 561 | Yipin Pigments, Inc. | Yipin® Lemon Chrome Yellow 561 is a yellow lead chromate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product...展開 Yipin® Lemon Chrome Yellow 561 is a yellow lead chromate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. 收起 |
