2-Methylimidazole | Jiangsu Cale New Materials Co., Ltd. | 2-Methylimidazole is a white to offwhite crystalline powder. This product has moisture absorbility, is soluble in water and alcohol, hardly soluble in benzene, toxic, pungent, and corrosive to skin and mucous membrane. 2-Methylimidazole is used as a curin...展開 2-Methylimidazole is a white to offwhite crystalline powder. This product has moisture absorbility, is soluble in water and alcohol, hardly soluble in benzene, toxic, pungent, and corrosive to skin and mucous membrane. 2-Methylimidazole is used as a curing agent for epoxy resin and an auxiliary agent for textile dyes. 收起 | |
2-Phenylimidazole | Jiangsu Cale New Materials Co., Ltd. | 2-Phenylimidazole is a off white or faint yellow crystal powder. It has a melting point of 146.0 - 149.0℃. 2-Phenylimidazole is used as a curing agent for epoxy resin and polyurethane, and used as intermediate medicine, pesticide, and dyestuff. | |
99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
Adherant ADK | Elementis 海名斯特殊化学 | Adherant ADK 为增进復合油墨对 PET 材质附着性,以及溶剂型涂料对层间密着和各种塑料、金属底材的密着性的添加剂。 | |
Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
BENATHIX® | Elementis 海名斯特殊化学 | BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mix...展開 BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mixing equipment unlike conventional organoclays. 收起 | |
BENGEL® 434 | Elementis 海名斯特殊化学 | BENGEL® 434 流變助劑是一種通用型有機膨潤土,專門用於低至中極性脂肪烴及芳香烴塗料系統中。 | |
BENGEL® 818 | Elementis 海名斯特殊化学 | 與傳統的有機黏土相比,BENGEL® 818 具有極佳的分散性、良好的搖變性、抗流掛性及防沉降性。它屬於超分散型,在生產過程中具有很大的靈活性。推薦用於氣幹型長油度醇酸瓷漆、聚氨酯打磨型封閉底漆、普通的工業維護系統和脂肪族系統中。 | |
BENGEL® 828 | Elementis 海名斯特殊化学 | BENGEL® 828 流變助劑的超分散性可大大簡化油漆系統的配製及製造。適用於有中至高極性塗料系統,如酮類、酯類、醇酯類、醚酯類、醇類。使用BENGEL® 828給油漆生產商提供了提高生產效率的機會。 | |
BENGEL® 958 | Elementis 海名斯特殊化学 | BENGEL® 958流变助剂是一种易分散型有机膨润土,适用于低到中极性有机溶剂体系。提供良好的抗流挂性和防沉性能。容易分散,在生产过程中可灵活操作。推荐使用在气乾型长油醇酸瓷漆、聚氨酯体系、打印油墨、密封胶和脂肪族体系中。 | |
BENGEL® 988 | Elementis 海名斯特殊化学 | BENGEL® 988 為超分散型有機膨潤土流變助劑,可簡化油漆系統的配製及製造。本產品具有廣泛的應用,可用於中/低至高極性溶劑塗料與油墨系統。 | |
BENTONE® 27 | Elementis 海名斯特殊化学 | BENTONE® 27 為一適用於中至高極性有機溶劑塗料系統與合成黏結劑系統的有機膨潤土添加劑。 | |
BENTONE® 34 | Elementis 海名斯特殊化学 | BENTONE® 34 為一適用於低至中極性有機溶劑塗料系統的有機膨潤土添加劑。 | |
BENTONE SD® -1 | Elementis 海名斯特殊化学 | BENTONE SD® -1 為一適用於脂肪族及非極性到中極性有機溶劑塗料系統的有機膨潤土添加劑。 | |
BENTONE SD® -2 | Elementis 海名斯特殊化学 | BENTONE SD® -2 為一適用於中至高極性有機溶劑塗料系統的有機膨潤土添加劑。 | |
Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
DAPRO® ACP-16W | Elementis 海名斯特殊化学 | DAPRO® ACP-16W 為水性密著增進劑,設計用於用增進水性塗料與油墨在聚丙烯(PP)材質上的密著效果。 | |
DAPRO® AP 1622 | Elementis 海名斯特殊化学 | DAPRO® AP 1622 為溶劑系統使用的矽酮改質液態泡沫抑制劑。在不同系統中,具有顯著的消泡性能。具有易於添加在各式溶劑塗料油墨的方便使用特點。 | |
DAPRO® AP 7015 | Elementis 海名斯特殊化学 | DAPRO® AP 7015 為一具有良好乳化性能的水性消泡劑,具有優異的消泡、抑泡效果。 | |
DAPRO® AP 7072 | Elementis 海名斯特殊化学 | DAPRO® AP 7072 高效適合用於高品質橡膠應用,且提供極佳的泡沫抑制和消泡性能。DAPRO® AP 7072 在水中極易分散。適用於建築塗料、黏合劑、乳液製備和水墨等水性系統。 | |
DAPRO® BEZ 75 | Elementis 海名斯特殊化学 | DAPRO® BEZ 75 是用於非水性塗料的高效能添加劑,具有極佳抗沉降與抗垂流效能,特別適用於不含芳香族的塗料配方。 | |
DAPRO® DF 1760 | Elementis 海名斯特殊化学 | DAPRO® DF 1760 是一高效能且不含有機矽長效型消泡劑。即使塗料長期存放後使用,仍可維持其有效的消泡性能。DAPRO® DF 1760 所含的所有非揮發性成分皆符合美國聯邦法規的藥物暨食品管理(FDA)CFR 21 175.105;175.300;176.170 與 176.180 條款的規定。 | |
DAPRO® DF 677 | Elementis 海名斯特殊化学 | DAPRO® DF 677 is a high performance defoamer. It is recommended for aqueous inks. | |
DAPRO® DF 690 | Elementis 海名斯特殊化学 | DAPRO® DF 690 is an antifoaming agent for a grinding stage or high shear stage with excellent destabilizing effect on foaming and microbubbles. It exhibits excellent durability without affecting system gloss and color rendering. | |
DAPRO® DF 7015 | Elementis 海名斯特殊化学 | DAPRO® DF 7015是一具有良好乳化性能的水性消泡剂。特别推荐用于研磨浆料、乳胶漆和油墨 | |
DAPRO® UW 461 | Elementis 海名斯特殊化学 | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | |
DAPRO® W-77 | Elementis 海名斯特殊化学 | DAPRO® W-77 表面張力調整劑可作為高表面張力與低表面張力介面間的緩衝介質,無論是用於塗層與塗層之間或是塗層與基材之間。其可有效消除或減少塗膜缺陷如:表面塗布不均、魚眼、縮孔等。DAPRO® W-77 亦可促進塗料在難以潤濕或受污染的基材表面上的均勻塗布,並提供極佳的重塗性。DAPRO® W-77 不含烷基酚乙氧基化合物與有機矽,其非揮發性成分符合美國聯邦法規之藥物暨食品管理(FDA)之 CFR 21 175.300 條款的規定。 | |
Defom 5800F | Elementis 海名斯特殊化学 | Defom 5800F 為不含芳香族的溶劑型消泡劑,符合環保規定,廣泛用於溶劑型塗料系統。 | |
Defom 6800 | Elementis 海名斯特殊化学 | Defom 6800 為適用於高固成份、高膜厚環氧地板塗料及絲網油墨抑泡、消泡劑。 | |
Defom W-0506 | Elementis 海名斯特殊化学 | Defom W-0506 为一以乳化聚硅氧烷为主要成份的消泡剂产品。广泛用于水性体系的抑泡、消泡。 | |
Defom W-082 | Elementis 海名斯特殊化学 | Defom W-082 为含疏水性粒子的矿物油系消泡剂。可提供优异的抑泡、消泡效果。 | |
Defom W-086 | Elementis 海名斯特殊化学 | Defom W-086 is a mineral oil-based defoamer which contains hydrophobic particles. It provides excellent foam suppression and anti-foaming effect. | |
DeuAdd MA-95 | Elementis 海名斯特殊化学 | DeuAdd MA-95 为低气味多功能胺中和剂,兼具酸硷值调节和稳定﹑促进漆膜光泽展现﹑提高罐内防腐蚀性能等。 | |
DeuRheo 201 | Elementis 海名斯特殊化学 | DeuRheo 201 為一分散的聚乙烯蠟漿,添加時取用方便且易於分散的防沉劑。 | |
DeuRheo 201P | Elementis 海名斯特殊化学 | DeuRheo 201P 为一分散的聚乙烯蜡浆,添加时取用方便且易于分散的防沉剂。 | |
DeuRheo 229 | Elementis 海名斯特殊化学 | DeuRheo 229 为一预先分散在溶剂中的聚 胺蜡,能够提供颜填料在涂料体系中的防沉性,以及防流挂效果。 | |
DeuRheo WT-102 | Elementis 海名斯特殊化学 | DeuRheo WT-102 為一締合型聚胺酯增稠劑,提供增稠、觸變等效能。 | |
DeuRheo WT-105A | Elementis 海名斯特殊化学 | DeuRheo WT-105A 為一 締合型聚胺酯增稠劑,提供水性系統增稠、流動等效能。 | |
DeuRheo WT-108 | Elementis 海名斯特殊化学 | DeuRheo WT-108 is a non-ionic associative thickener (NiSAT) suitable for use in aqueous systems. It provides medium shear viscosity and is compatible with fluidity. This product is designed to be free of tin, APEO and organic solvents. | |
DeuRheo WT-108F | Elementis 海名斯特殊化学 | DeuRheo WT-108F 為非離子締合型增稠劑(NiSAT)適用於水性系統的應用,可提供中剪切黏度並兼顧流動性,本產品設計不含錫、APEO與有機溶劑。 | |
Disponer 904S | Elementis 海名斯特殊化学 | Disponer 904S 為特殊酸與矽酮混合的潤濕、分散劑,對防止二氧化鈦和其他顏料配用所產生的分色、浮色特具效果;並可避免產生沉積硬結。 | |
Disponer 912 | Elementis 海名斯特殊化学 | Disponer 912 具有优异的颜料润湿分散性,可适用于溶剂型涂料及油墨中无机颜料及膨润土的润湿、分散,特别推荐使用于木器底漆中,以增进对木材导管的润湿性。 | |
Disponer 929 | Elementis 海名斯特殊化学 | Disponer 929 是針對碳黑而發展出來的分散、展色劑,可添加在塗料內研磨;作為研磨展色劑,單獨與碳黑混合研磨分散,作成調色或著色用黑色漿。 | |
Disponer 983 | Elementis 海名斯特殊化学 | Disponer 983 為高分子型分散劑,適用於溶劑型中極性系統碳黑及有機顏料的分散。 | |
Disponer W-920 | Elementis 海名斯特殊化学 | Disponer W-920是一種獨特的分散助劑,可用於有機顏料、鐵氧化物顏料在水性體系中的分散 | |
DMAE | Elementis 海名斯特殊化学 | DMAE 為一高效的胺中和劑。可作為 pH 值調整、穩定及輔助溶劑等效能。 | |
Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
Hypomer FX-2052 | Elementis 海名斯特殊化学 | 乾燥速度快、塑膠密著性佳、耐候性佳、對乙丁纖維素相容性佳、可用於自乾塗料 | |
Levaslip 435 | Elementis 海名斯特殊化学 | Levaslip 435 為適用於溶劑型系統的流平劑。 | |
Levaslip W-461 | Elementis 海名斯特殊化学 | Levaslip W-461 為適用於水性及高極性溶劑系統的平滑、耐摩擦、抗刮傷、防止貼合助劑。 | |
Levelol 839 | Elementis 海名斯特殊化学 | Levelol 839 為不含芳香烴氟改質聚丙烯酸酯可重塗流平劑,可提供優異流平性與底材潤濕性。 | |
Levelol W-469 | Elementis 海名斯特殊化学 | Levelol W-469 为硅酮类底材润湿剂,适用于水性体系。 | |
Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
NUOSPERSE® FA 196 | Elementis 海名斯特殊化学 | NUOSPERSE® FA 196 應用於有機溶劑系統的高度濃縮液體顏料分散劑。特別適用於碳黑的分散劑、熱塑性丙烯酸系統的分散劑及作為促進通用色漿在基礎醇酸塗料中進行分散的助劑。 | |
NUOSPERSE® FX 365 | Elementis 海名斯特殊化学 | NUOSPERSE® FX 365 用於水性系統的非離子型潤濕分散劑。具有優異的顏料潤濕與穩定性能。 | |
NUOSPERSE® FX 600 | Elementis 海名斯特殊化学 | NUOSPERSE® FX 600 為一高效水性顏料分散劑,可用於工業塗料、防護塗料、高光乳膠漆、色漿與印刷油墨。是一種液態多功能聚合物且不含有機溶劑。 | |
NUOSPERSE® FX 7500W | Elementis 海名斯特殊化学 | NUOSPERSE® FX 7500W 為水性塗料及水性墨水用之潤濕分散劑。具有優異的降黏效果,同時能提高有機及無機顏料的展色力。 | |
NUOSPERSE® FX 9200 | Elementis 海名斯特殊化学 | NUOSPERSE® FX 9200 適用於溶劑型與無溶劑型的油墨系統,對於有機顏料與碳黑具有良好的潤濕與分散效果。 | |
NUOSPERSE® FX 9200UV | Elementis 海名斯特殊化学 | NUOSPERSE® FX 9200UV 適用於溶劑型與無溶劑型(UV)的油墨系統,對於有機顏料與碳黑具有良好的潤濕與分散效果。 | |
NUOSPERSE® W-22 | Elementis 海名斯特殊化学 | NUOSPERSE® W-22为一高效水性颜料润湿分散剂,可稳定颜料分散,且避免结块与粘度改变。 | |
NUOSPERSE® W-30 | Elementis 海名斯特殊化学 | NUOSPERSE® W-30为一对环境无害的分散剂(APE - Free),可提供各种颜料的展色性与提高产能,对于水性涂料体系的颜料分散有理想的效果,可稳定分散避免结块。 NUOSPERSE® W-30不会造成气泡生成或降低光泽度,也不影响乾燥时间、阻值或涂模硬度。在高光泽度涂料中,改善分散性的同时,可提高光泽度与鲜映性。 | |
Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
Polurene IR 51 K | S.A.P.I.C.I. SpA | Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product prime...展開 Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product primer or overprint varnishes. 收起 | |
Polurene OK K | S.A.P.I.C.I. SpA | Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties. | |
Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...展開 Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. 收起 | |
Polurene T 70 AE | S.A.P.I.C.I. SpA | Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings w...展開 Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings with good chemical and weather resistance. This product contains less than .5% IPDI isocyanates. 收起 | |
Polurgreen FP75-01 | S.A.P.I.C.I. SpA | Polurgreen FP75-01 is a polyurethane adduct. This product contains less than .1% TDI isocyanates. It may be used in 2K adhesives and inks. Polurgreen FP75-01 is in accord with EU, BFR, and FDA regulations for food packaging. | |
Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起 | |
Refined Fatty Acid | Zouping Tianxing Chemical Industry Co., Ltd. | Refined Fatty Acid, in the form of a clear liquid, is a high-quality raw material that can be used in coatings and printing inks. Its iodine value lies between 50 and 60, and it contains between 210 and 225 mg of potassium hydroxide per gram. | |
Refined Glycerine | Zouping Tianxing Chemical Industry Co., Ltd. | Refined Glycerine, in the form of a transparent liquid without suspended precipitates, is a raw material that can be used in paints, textiles, printing and dyeing. This product's density is greater than 1.2481 g/ml and it contains no more than 0.05% ash. | |
Rexin K 1939 | S.A.P.I.C.I. SpA | Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...展開 Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. 收起 | |
Rexin K 411 | S.A.P.I.C.I. SpA | Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for ...展開 Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for prolonged and continuous use. 收起 | |
Rexin K 6258 | S.A.P.I.C.I. SpA | Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes. | |
Rexin K 6302 | S.A.P.I.C.I. SpA | Rexin K 6302 is a polyester resin. This product is soluble in ethyl acetate. It can be used in the formulation of inks and overprint varnishes. | |
RHEOLATE® 1 | Elementis 海名斯特殊化学 | RHEOLATE® 1 rheological additive is an aqueous alkali swellable acrylic (HASE) thickener with a high thickening efficiency in the medium-shear-rate range and imparts excellent pigment suspension properties. Unlike other acrylic thickeners, RHEOLATE® 1 rhe...展開 RHEOLATE® 1 rheological additive is an aqueous alkali swellable acrylic (HASE) thickener with a high thickening efficiency in the medium-shear-rate range and imparts excellent pigment suspension properties. Unlike other acrylic thickeners, RHEOLATE® 1 rheology modifier does not impair gloss and is suitable for various waterborne paint and coating systems. 收起 | |
RHEOLATE® 212 | Elementis 海名斯特殊化学 | RHEOLATE® 212 是一20%固含量、不含揮發性有機化合物(VOC)的水性系統用聚醚聚氨酯締合型流變助劑。它被設計使用在需要高剪切黏度和改善塗膜平坦性的乳膠漆及其它水性系統,包括油墨、紡織塗料、黏著劑以及密封劑等。RHEOLATE® 212 可以單獨使用於小粒徑的乳液系統。若系統需要較高的中剪切黏度時,它可與 RHEOLATE® 255 或 RHEOLATE® 266 搭配使用。RHEOLATE® 212 在不含 VOC 的亮光及半光系統中提供高剪切黏度、改善流動和平坦性能的效果比其他流變改質 | |
RHEOLATE® 278 | Elementis 海名斯特殊化学 | RHEOLATE® 278 is a 25 % solution designed for use in paints containing small-particle-size emulsions and high-volume-solids systems. RHEOLATE® 278 is an additive with superior thickening efficiency in the high-shear range (ICI viscosity) – beyond that of ...展開 RHEOLATE® 278 is a 25 % solution designed for use in paints containing small-particle-size emulsions and high-volume-solids systems. RHEOLATE® 278 is an additive with superior thickening efficiency in the high-shear range (ICI viscosity) – beyond that of other thickeners. Emulsion paints with various ICI viscosities can be formulated by combining RHEOLATE® 255 and RHEOLATE® 278 or other rheological additives. 收起 | |
RHEOLATE® FX 1010 | Elementis 海名斯特殊化学 | RHEOLATE® FX 1010 為一用於水性塗料的高效能聚醚聚氨酯流變助劑。其以液態形式供應,易於處理,方便使用。 | |
SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起 | |
SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起 | |
Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起 | |
Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起 | |
SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起 | |
SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起 |