UL Prospector

Success!

Successfully saved your search
#1 Castor Oil Acme Hardesty Co. #1 Castor Oil is a versatile product used for a wide variety of applications. It is a natural product, made from the beans of the castor plant which can be grown in any tropical region. This product is used as a viscosity modifier for adhesives and sealan...view more #1 Castor Oil is a versatile product used for a wide variety of applications. It is a natural product, made from the beans of the castor plant which can be grown in any tropical region. This product is used as a viscosity modifier for adhesives and sealants. view less
(3,3,3 Tri FluoroPropyl) Methyl Di-Methoxy Silane FD-1001 Zhejiang Feidian Chemical Co., Ltd. FD-1001 is a (3,3,3 tri fluoro propyl) methyl di-methoxy silane. It is supplied as a colorless liquid.
1,3,5-Tris[(3,3,3-trifluoropropyl)methyl] cyclotrisiloxane FD-1000 Zhejiang Feidian Chemical Co., Ltd. FD-1000 is a 1,3,5-Trimethyl-1,3,5-tris(3,3,3-trifluoropropyl)cyclotrisiloxane. It is supplied in white crystal form.
2,2-Dibromo-3-Nitrilopropionamide (DBNPA) ChemFine International Co., Ltd. 2,2-Dibromo-3-Nitrilopropionamide (DBNPA) is a kind of wide spectrum, high efficiency, industrial germicide that can be used in paint and as an adhesive.
2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD BASF SE, Intermediates Division 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks.
Request Sample 2-(3,4-Epoxycyclohexyl) Ethyltriethoxysilane Dalian Onichem Co., Ltd. 2-(3,4-Epoxycyclohexyl) Ethyltriethoxysilane is a coupling and crosslinking agent for waterborne systems. 2-(3,4-Epoxycyclohexyl) Ethyltriethoxysilane is used in latexes and PUD.
Request Sample 2-(3,4-Epoxycyclohexyl) Ethyltrimethoxysilane Dalian Onichem Co., Ltd. 2-(3,4-Epoxycyclohexyl) Ethyltrimethoxysilane is a coupling agent for epoxy composites. 2-(3,4-Epoxycyclohexyl) Ethyltrimethoxysilane is compatible with cationic cure chemistries.
2-(Morpholinothio)benzothiazole Hainan Zhongxin Chemical Co., Ltd. 2-(Morpholinothio)benzothiazole, synonymous with NOBS (MBS) is faint yellow or orange granules that are at least 95% pure. It is an after-effect quick accelerator which can increase scorching time and improve processing safety. It is primarily used as an ...view more 2-(Morpholinothio)benzothiazole, synonymous with NOBS (MBS) is faint yellow or orange granules that are at least 95% pure. It is an after-effect quick accelerator which can increase scorching time and improve processing safety. It is primarily used as an accelerator in the production rubbers and adhesives. view less
2-ETHYL-1,3-HEXANEDIOL (OCTANEDIOL) KH Neochem Americas, Inc. A Chelating agent.
Request Sample 2-HEMA-Phosphate Kowa American Corp/ San Esters Corp. 2-HEMA-Phosphate is a monomer with a functional phosphate group. It offers improved corrosion resistance, better adhesion to metal substrates as well as other difficult substrates, and requires less surface preparation. Besides polymer systems, 2-HEMA-Pho...view more 2-HEMA-Phosphate is a monomer with a functional phosphate group. It offers improved corrosion resistance, better adhesion to metal substrates as well as other difficult substrates, and requires less surface preparation. Besides polymer systems, 2-HEMA-Phosphate can be used in pigment systems to promote adhesion. view less
2-Mercaptobenzothiazole Hainan Zhongxin Chemical Co., Ltd. 2-Mercaptobenzothiazole MBT(M) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either a light yellow powder or granule and can achieve good cold vulcanization when used together with a secondary accelerator such as...view more 2-Mercaptobenzothiazole MBT(M) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either a light yellow powder or granule and can achieve good cold vulcanization when used together with a secondary accelerator such as TMTD, TETD or DPG. It can impart anti-aging properties to vulcanized rubbers and is mainly used in the manufacturing of tires, adhesive tapes, rubber overshoes and other rubber products. view less
2-Mercaptobenzothiazole (Refined) Hainan Zhongxin Chemical Co., Ltd. 2-Mercaptobenzothiazole MBT(M) (Refined) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either as a light yellow powder or granule and can achieve good cold vulcanization when used together with secondary accelera...view more 2-Mercaptobenzothiazole MBT(M) (Refined) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either as a light yellow powder or granule and can achieve good cold vulcanization when used together with secondary accelerator such as TMTD, TETD or DPG. It can impart anti-aging properties to vulcanized rubbers and is mainly used in the manufacturing of tires, adhesive tapes, rubber overshoes and other rubber products. 2-Mercaptobenzothiazole is a refined version of 2-Mercaptobenzothiazole with a slightly higher initial M.P. count of 172.0 minimum oC. view less
Request Sample 200W™ Univar Solutions (formerly Nexeo Solutions) 200W™ is a coarse particle size, dry ground marble with a white color and low binder demand. The low binder demand permits very high loading levels in applications such as carpet backing and textured paints. This corase product finds applications in grout...view more 200W™ is a coarse particle size, dry ground marble with a white color and low binder demand. The low binder demand permits very high loading levels in applications such as carpet backing and textured paints. This corase product finds applications in grouts, ceramics, and coatings. view less
205 U.S. Zinc 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is a...view more 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is available in a pelleted form (205P) and with surface treatment (205S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. view less
205H U.S. Zinc 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate...view more 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate purity and greater reactivity are required. Grade 205H is available in a pelleted form (205HS) and with surface treatment (205HS). 205H has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. view less
205HSA U.S. Zinc 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applica...view more 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applications where great reactivity is required. 205HSA is obtainable with surface treatment (205HSA-S). It has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (pounds/ft3). view less
205L U.S. Zinc 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger...view more 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger than average particles. Grade 205L is available in a pelleted form (205LP) and with surface treatment (205LS). 205L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. view less
205XL U.S. Zinc 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles....view more 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles. It has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. view less
210 U.S. Zinc 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake li...view more 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake lining, and agriculture industries and in applications where General purpose zinc oxide could be used. 210 is available in a pelleted form (210P) and with surface treatment (210S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. view less
210E U.S. Zinc 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industrie...view more 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industries. 210E is available in pelleted form (210E-P) and with surface treatment (210ES). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. view less
210H U.S. Zinc 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is availab...view more 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is available in a pelleted form (210HP) and with surface treatment (210HS). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. view less
210HSA U.S. Zinc 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries an...view more 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries and in applications where high reactivity is required. 210HSA is available with surface treatment (210HSA-S). It has a surface area range of 8 to 10 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40. view less
210L U.S. Zinc 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with ...view more 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with surface treatment (210LS). It has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. view less
Request Sample 3-Glycidoxypropylmethyldiethoxysilane Dalian Onichem Co., Ltd. 3-Glycidoxypropylmethyldiethoxysilane is a coupling and crosslinking agent for waterborne systems. 3-Glycidoxypropylmethyldiethoxysilane is used in acrylic SBR and polyurethane adhesives.
Request Sample 3-Glycidoxypropyltriethoxysilane Dalian Onichem Co., Ltd. 3-Glycidoxypropyltriethoxysilane is an adhesion promoter in polysulfide, urethane, epoxy and acrylic caulks, sealants, adhesives and coatings.
Request Sample 3-Isocyanatopropyltriethoxysilane Dalian Onichem Co., Ltd. 3-Isocyanatopropyltriethoxysilane is a bonding additive and used for polymer endcapping.
Request Sample 3-Isocyanatopropyltrimethoxysilane Dalian Onichem Co., Ltd. 3-Isocyanatopropyltrimethoxysilane is a crosslinking agent used in silylated polyurethanes.
Request Sample 3-Mercaptopropyltriethoxysilane Dalian Onichem Co., Ltd. 3-Mercaptopropyltriethoxysilane is a coupling agent for sulfur, cured rubber, and polyurethanes.
Request Sample 3-Mercaptopropyltrimethoxysilane Dalian Onichem Co., Ltd. 3-Mercaptopropyltrimethoxysilane is a coupling agent for sulfur, cured rubber and polyurethanes.
Request Sample 3-Thiocyanatopropyltriethoxysilane Dalian Onichem Co., Ltd. 3-Thiocyanatopropyltriethoxysilane is a coupling agent for mechanical rubber goods, and shoe soles.
Request Sample 3-Ureidopropyltriethoxysilane (50% in Methanol) Dalian Onichem Co., Ltd. 3-Ureidopropyltriethoxysilane (50% in Methanol) is a colorless to light brown liquid which boils at 64.5°C. It is an ureido silane used as a coupling agent in a wide range of applications for adhesives, sealants, coatings, foundry and fiber glass.
Request Sample 3-Ureidopropyltrimethoxysilane Dalian Onichem Co., Ltd. 3-Ureidopropyltrimethoxysilane is a bonding additive suited for contaminated surfaces.
4,4'-dithiodimorpholine Hainan Zhongxin Chemical Co., Ltd. 4,4'-dithiodimorpholine, synonymous with DTDM and Vulcanizing Agent DTDM, is a sulphur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure systems. It is a white crystline powder or granule that is primarily used in t...view more 4,4'-dithiodimorpholine, synonymous with DTDM and Vulcanizing Agent DTDM, is a sulphur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure systems. It is a white crystline powder or granule that is primarily used in the production of synthetic rubbers and adhesives. view less
Request Sample 40-200™ Univar Solutions (formerly Nexeo Solutions) 40-200™ is a dry ground marble with a coarse particle size controlled between 40 and 200 mesh screens. It is widely used in applications with high loading levels such as cement finishes, textured coatings, and abrasives.
4892-SD-50 Epoxy Ester Gabriel Performance Products 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enam...view more 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enamels. view less
501-E Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc 501-E is an adhesive activator that rapidly and completely cures high-strength adhesives. It is used by pre-applying to metallic, plated, ceramic, or glass substrates including PCBs. 501-E is also used with Dymax industrial 600 series and 800 series struc...view more 501-E is an adhesive activator that rapidly and completely cures high-strength adhesives. It is used by pre-applying to metallic, plated, ceramic, or glass substrates including PCBs. 501-E is also used with Dymax industrial 600 series and 800 series structural adhesives, and 9- series thermal interface adhesives in gaps from less than 1 mil to 20 mils. view less
535-A Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc 535-A is an adhesive activator that rapidly and completely cures high-strength adhesives. It does this when pre-applied to metal, painted/coated metal, plated and surface treated metal, ferrite, ceramic, glass, wood, and thermoset plastic substrates. 535-...view more 535-A is an adhesive activator that rapidly and completely cures high-strength adhesives. It does this when pre-applied to metal, painted/coated metal, plated and surface treated metal, ferrite, ceramic, glass, wood, and thermoset plastic substrates. 535-A can also be used in Dymax industrial 600 and 800 series structural adhesives. view less
99.99% Conductive Shining Flake Silver Powder Beijing Entrepreneur Science &Trading Co., Ltd. 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...view more 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. view less
99.99% Conductive Silver Powder (Spherical) Beijing Entrepreneur Science &Trading Co., Ltd. 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications.
A-6 Polyamine Epoxy Chemicals, Inc. A-6 Polyamine is a straw colored amine curing agent compatible with most aliphatic and cycloaliphatic amine curing agents.This product is intended for use with liquid epoxy resins at room temperature, has virtually no odor, high strength, and has damp adh...view more A-6 Polyamine is a straw colored amine curing agent compatible with most aliphatic and cycloaliphatic amine curing agents.This product is intended for use with liquid epoxy resins at room temperature, has virtually no odor, high strength, and has damp adhesion properties. It finds application in construction adhesives, hardened concrete adhesives, injection resin, and ASTM 881 resin systems. view less
A-6165 Designer Molecules A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications.
A-675-100% Designer Molecules A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...view more A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. view less
Request Sample A-C® 1660 Univar Solutions (formerly Nexeo Solutions) A-C® 1660 is high melt temperature, hard polypropylene (PP) homopolymer for use in solvent borne coatings and hot melt adhesives to improve surface properties (drag) and heat resistance.
Request Sample A-C® 1702 Univar Solutions (formerly Nexeo Solutions) A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings; heat set, sheet fed solvent borne inks; and specialty digital and UV/EB inks to provide mar and rub resistance by...view more A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings; heat set, sheet fed solvent borne inks; and specialty digital and UV/EB inks to provide mar and rub resistance by lowering the coefficient of friction. view less
Request Sample A-C® 1754 Univar Solutions (formerly Nexeo Solutions) A-C® 1754 is a polypropylene homopolymer.
Request Sample A-C® 316A Univar Solutions (formerly Nexeo Solutions) A-C® 316A is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion re...view more A-C® 316A is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. view less
Request Sample A-C® 325 Univar Solutions (formerly Nexeo Solutions) A-C® 325 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion res...view more A-C® 325 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. view less
Request Sample A-C® 330 Univar Solutions (formerly Nexeo Solutions) A-C® 330 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion res...view more A-C® 330 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. view less
Request Sample A-C® 392 Univar Solutions (formerly Nexeo Solutions) A-C® 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion res...view more A-C® 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. view less
Request Sample A-C® 3A Univar Solutions (formerly Nexeo Solutions) A-C® 3A is low density polyethylene (LDPE) homopolymer powder for use in solvent borne coatings and heat set, sheet fed and liquid inks to improve surface properties. It accomplishes this by lowering the coefficient of friction (improving slip) of the sur...view more A-C® 3A is low density polyethylene (LDPE) homopolymer powder for use in solvent borne coatings and heat set, sheet fed and liquid inks to improve surface properties. It accomplishes this by lowering the coefficient of friction (improving slip) of the surface and therefore improving mar and abrasion resistance. . view less
Request Sample A-C® 400 Univar Solutions (formerly Nexeo Solutions) A-C® 400 is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing appli...view more A-C® 400 is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which increases thermal and breakage resistance, adhesion to glass, and fragrance retention. view less
Request Sample A-C® 405M Univar Solutions (formerly Nexeo Solutions) A-C® 405M is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats.
Request Sample A-C® 405T Univar Solutions (formerly Nexeo Solutions) A-C® 405T is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats.
Request Sample A-C® 415 Univar Solutions (formerly Nexeo Solutions) A-C® 415 is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 15%, developed specifically to be used as an adhesive flooding compound between the cable bundle and extruded outer jacket in the manufacturing of cables. .
Request Sample A-C® 5120 Univar Solutions (formerly Nexeo Solutions) A-C® 5120 is ethylene acrylic acid copolymer in a prill form, with an acrylic acid content of 15%, promotes adhesion to various substrates, and rheology control for solventborne coatings.
Request Sample A-C® 540 Univar Solutions (formerly Nexeo Solutions) A-C® 540 is ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid content of 5%, improves adhesion, provides rheology control and provides metallic flake orientation.
Request Sample A-C® 540A Univar Solutions (formerly Nexeo Solutions) A-C® 540A is ethylene acrylic acid (EAA) copolymer in a powder form, with an acrylic acid content of 5%, improves adhesion, provides rheology control and provides metallic flake orientation.
Request Sample A-C® 573P Univar Solutions (formerly Nexeo Solutions) A-C® 573P is ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid content of 10%, improves adhesion to various substrates, provides rheology control for solvent borne coatings along with providing metallic flake orientation.
Request Sample A-C® 596P Univar Solutions (formerly Nexeo Solutions) A-C® 596P is Propylene Maleic Anhydride Copolymer, with a SAP # of 50, in pastille form, provides non polar and polar characteristics which boost adhesion while maintaining oxadative stability.
Request Sample A-C® 6 Univar Solutions (formerly Nexeo Solutions) A-C® 6 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as ...view more A-C® 6 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. view less
Request Sample A-C® 617 Univar Solutions (formerly Nexeo Solutions) A-C® 617 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
Request Sample A-C® 617A Univar Solutions (formerly Nexeo Solutions) A-C® 617A is low density polyethylene (LDPE) homopolymer in a powder form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
Request Sample A-C® 629 Univar Solutions (formerly Nexeo Solutions) A-C® 629 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lowe...view more A-C® 629 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. view less
Request Sample A-C® 629A Univar Solutions (formerly Nexeo Solutions) A-C® 629A is low density Oxidized Polyethylene homopolymer in powder form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lo...view more A-C® 629A is low density Oxidized Polyethylene homopolymer in powder form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. view less
Request Sample A-C® 656 Univar Solutions (formerly Nexeo Solutions) A-C® 656 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lowe...view more A-C® 656 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. view less
Request Sample A-C® 6702 Univar Solutions (formerly Nexeo Solutions) A-C® 6702 is grease like, low temperature, completely amorphous, Low density Oxidized Polyethylene Homopolymer which can be emulsified for use in aqueous systems, for applications such as mold release and lubricants.
Request Sample A-C® 680 Univar Solutions (formerly Nexeo Solutions) A-C® 680 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lowe...view more A-C® 680 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. view less
Request Sample A-C® 6A Univar Solutions (formerly Nexeo Solutions) A-C® 6A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
Request Sample A-C® 725 Univar Solutions (formerly Nexeo Solutions) A-C® 725 is low density polyethylene (LDPE) Homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. .
Request Sample A-C® 725P Univar Solutions (formerly Nexeo Solutions) A-C® 725P is low density polyethylene (LDPE) Homopolymer in a pastille form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. .
Request Sample A-C® 8 Univar Solutions (formerly Nexeo Solutions) A-C® 8 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
Request Sample A-C® 820A Univar Solutions (formerly Nexeo Solutions) A-C® 820A is very low viscosity, medium density polyethylene (PE) homopolymer for use in solvent borne coatings, in heatset and liquid solvent borne inks to improve mar & abrasion (rub resistance) by lowering COF(Increasing slip).
Request Sample A-C® 8A Univar Solutions (formerly Nexeo Solutions) A-C® 8A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
Request Sample A-C® 9 Univar Solutions (formerly Nexeo Solutions) A-C® 9 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
Request Sample A-C® 9A Univar Solutions (formerly Nexeo Solutions) A-C® 9A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
AC-21 Ark (Fogang) Chemicals Industry Co., Ltd. AC-21 is a modified amino saline primarily used as an adhesion promoter and comes as a light yellowish liquid. It can be used to enhance polymeric coatings, and as a binder to glass and metallic substrate. It can also be used as a coating material for epo...view more AC-21 is a modified amino saline primarily used as an adhesion promoter and comes as a light yellowish liquid. It can be used to enhance polymeric coatings, and as a binder to glass and metallic substrate. It can also be used as a coating material for epoxy, silicone, acrylic and polyurethane. view less
AC-62 Ark (Fogang) Chemicals Industry Co., Ltd. AC-62 is a N-β-aminoethylaminopropyl trimethoxysilane with the chemical formula of H2NC2H4NHC3H6Si(OCH3)3 and comes as a clear to slightly yellowish liquid. Primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62 can be used...view more AC-62 is a N-β-aminoethylaminopropyl trimethoxysilane with the chemical formula of H2NC2H4NHC3H6Si(OCH3)3 and comes as a clear to slightly yellowish liquid. Primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62 can be used as an additive in foundry and abrasive thermosetting resin. view less
AC-626 Ark (Fogang) Chemicals Industry Co., Ltd. AC-626 is an N,N Bis{3-(trimethoxysilyl)propyl} ethylene diamine with the chemical formula CH2NH(CH2)3Si(OCH3)3 and comes as a clear to slightly yellowish liquid. It is primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62...view more AC-626 is an N,N Bis{3-(trimethoxysilyl)propyl} ethylene diamine with the chemical formula CH2NH(CH2)3Si(OCH3)3 and comes as a clear to slightly yellowish liquid. It is primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-626 can also be used as an additive in foundry and abrasive thermosetting resin. view less
AC-63 Ark (Fogang) Chemicals Industry Co., Ltd. AC-63 is a γ-Methacryloxypropyl trimethoxysilane and comes as a clear, colorless liquid. Primarily used as an additive in mineral reinforced PET, AC-63 can be used to improve adhesion and coupling in free radical cured resin to inorganic glass fibers, cla...view more AC-63 is a γ-Methacryloxypropyl trimethoxysilane and comes as a clear, colorless liquid. Primarily used as an additive in mineral reinforced PET, AC-63 can be used to improve adhesion and coupling in free radical cured resin to inorganic glass fibers, clay and silicas. view less
AC-65 Ark (Fogang) Chemicals Industry Co., Ltd. AC-65 is a γ-Aminopropyl triethoxysilane with the chemical formula H2NC3H6Si(OC2H5)3 and comes as a clear to slightly yellowish liquid. Primarily used as a primer or additive in phenolic resin. It can be used as a pre-treatment in filler and pigments for ...view more AC-65 is a γ-Aminopropyl triethoxysilane with the chemical formula H2NC3H6Si(OC2H5)3 and comes as a clear to slightly yellowish liquid. Primarily used as a primer or additive in phenolic resin. It can be used as a pre-treatment in filler and pigments for adhesive and sealant production. view less
AC-66 Ark (Fogang) Chemicals Industry Co., Ltd. AC-66 is a γ-Glycidopropyl trimethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-66 can be used as an adhesion promotor in polymer ...view more AC-66 is a γ-Glycidopropyl trimethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-66 can be used as an adhesion promotor in polymer to glass and metallic substrates. view less
AC-66(E) Ark (Fogang) Chemicals Industry Co., Ltd. AC-66(E) is a γ-Glycidoxypropyl triethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH5)3 and comes as a clear, colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-66(E) can be used as an adhesion pro...view more AC-66(E) is a γ-Glycidoxypropyl triethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH5)3 and comes as a clear, colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-66(E) can be used as an adhesion promotor to enhance polymer coating and as a binder to glass and metal substrates. view less
AC-661 Ark (Fogang) Chemicals Industry Co., Ltd. AC-661 is a γ-Glycidopropyl methyl dimethoxysilane with the chemical formula CH2OCHCH2OC3H6SiCH3(OCH3)2 and comes as a clear colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-661 can be used as an adhesion promotor i...view more AC-661 is a γ-Glycidopropyl methyl dimethoxysilane with the chemical formula CH2OCHCH2OC3H6SiCH3(OCH3)2 and comes as a clear colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-661 can be used as an adhesion promotor in polymer to glass as well as in metallic substrates. view less
AC-662 Ark (Fogang) Chemicals Industry Co., Ltd. AC-662 is a γ-Glycidopropyl methyl diethoxysilane with the chemical formula of CH2OCHCH2OC3H6SiCH3(OC2H5)2 and comes as clear colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-662 can be used as an adhesion...view more AC-662 is a γ-Glycidopropyl methyl diethoxysilane with the chemical formula of CH2OCHCH2OC3H6SiCH3(OC2H5)2 and comes as clear colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-662 can be used as an adhesion promoter to enhance polymer coating as well as a binder to glass and metal substrates. view less
AC-67 Ark (Fogang) Chemicals Industry Co., Ltd. AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic e...view more AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic emulsions as well as used for filler in glass fiber surface treatments. view less
AC-68 Ark (Fogang) Chemicals Industry Co., Ltd. AC-68 is a β-(3,4-Epoxycyclohexyl)ethyltriethoxysilane with the chemical structure CH2CH2Si(OC2H5)3 and comes as a clear, transparent liquid. Primarily used in the production of adhesives and sealants, AC-68 can be used as an additive to improve acrylic e...view more AC-68 is a β-(3,4-Epoxycyclohexyl)ethyltriethoxysilane with the chemical structure CH2CH2Si(OC2H5)3 and comes as a clear, transparent liquid. Primarily used in the production of adhesives and sealants, AC-68 can be used as an additive to improve acrylic emulsion in adhesives as well as a filler in glass fiber surface treatments. view less
AC-703 Anionic Fluorocarbon Surfactant Ark (Fogang) Chemicals Industry Co., Ltd. AC-703 Anionic Fluorocarbon Surfactant is an anionic surfactant that is primarily used as a wetting, dispersing and leveling agent in paints, inks, dyes and leather production. This product has a high temperature and alkali resistance and can be used in s...view more AC-703 Anionic Fluorocarbon Surfactant is an anionic surfactant that is primarily used as a wetting, dispersing and leveling agent in paints, inks, dyes and leather production. This product has a high temperature and alkali resistance and can be used in strong base or strong oxidant media. It is a brownish, clear liquid in appearance. view less
AC-76 Ark (Fogang) Chemicals Industry Co., Ltd. AC-76 is a Vinyltriisopropoxysilane with the chemical formula C11H24O3Si and comes as a clear and colorless liquid. It is primarily used as a monomer in acrylic emulsions in the production of paints and coatings.
AC-77 Ark (Fogang) Chemicals Industry Co., Ltd. AC-77 is a Vinyltris-(2-methoxyethoxysilane) with the chemical formula H2C=CHSi(OCH2CH2OCH3)3 and comes as a clear liquid. Primarily used as a cross-linker in vinyl-acrylic emulsion systems, AC-77 can be used as an additive mineral filled polymers and oth...view more AC-77 is a Vinyltris-(2-methoxyethoxysilane) with the chemical formula H2C=CHSi(OCH2CH2OCH3)3 and comes as a clear liquid. Primarily used as a cross-linker in vinyl-acrylic emulsion systems, AC-77 can be used as an additive mineral filled polymers and other rubber chemicals as an adhesion promoter for paints and coatings. view less
Request Sample ACLYN 295-A Univar Solutions (formerly Nexeo Solutions) ACLYN 295-A is a zinc ionomer of an EAA copolymer, in powdered form, is neutralized to 98%. Zinc can provide corrosion resistance. Used as a pigment dispersing agent for masterbatch in polar resin systems due to enhanced compatability with the resin carri...view more ACLYN 295-A is a zinc ionomer of an EAA copolymer, in powdered form, is neutralized to 98%. Zinc can provide corrosion resistance. Used as a pigment dispersing agent for masterbatch in polar resin systems due to enhanced compatability with the resin carrier. view less
Request Sample ACTFLOW® 1-A Kowa American Corp/ San Esters Corp. ACTFLOW® 1-A is apart of a liquid type acrylic polymer range. ACTFLOW® 1-A has an approximate molecular weight of 10000, and a viscosity of 1000 to 2000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal...view more ACTFLOW® 1-A is apart of a liquid type acrylic polymer range. ACTFLOW® 1-A has an approximate molecular weight of 10000, and a viscosity of 1000 to 2000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW® grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW® grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less
Request Sample ACTFLOW® CB-3060 Kowa American Corp/ San Esters Corp. ACTFLOW® CB-3060 is apart of a liquid type acrylic polymer grade range. ACTFLOW® CB-3060 has an approximate molecular weight of 3000, and a viscosity of 800 to 1200. Due to its environmentally sound characteristics as a non-solvent liquid polymer and exce...view more ACTFLOW® CB-3060 is apart of a liquid type acrylic polymer grade range. ACTFLOW® CB-3060 has an approximate molecular weight of 3000, and a viscosity of 800 to 1200. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW® grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW® grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less
Request Sample ACTFLOW® CB-3098 Kowa American Corp/ San Esters Corp. ACTFLOW® CB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW® CB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 20000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and e...view more ACTFLOW® CB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW® CB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 20000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW® grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW® grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less
Request Sample ACTFLOW® CBB-3098 Kowa American Corp/ San Esters Corp. ACTFLOW® CBB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW® CBB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 25000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and...view more ACTFLOW® CBB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW® CBB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 25000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW® grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW® grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less
Request Sample ACTFLOW® NE-1000 Kowa American Corp/ San Esters Corp. ACTFLOW® NE-1000 is apart of a liquid type acrylic polymer grade range. ACTFLOW® NE-1000 has an approximate molecular weight of 3000, and a viscosity of 1000 to 1500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and exc...view more ACTFLOW® NE-1000 is apart of a liquid type acrylic polymer grade range. ACTFLOW® NE-1000 has an approximate molecular weight of 3000, and a viscosity of 1000 to 1500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW® grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW® grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less
Request Sample ACTFLOW® NE-3000 Kowa American Corp/ San Esters Corp. ACTFLOW® NE-3000 is apart of a liquid type acrylic polymer grade range. ACTFLOW® NE-3000 has an approximate molecular weight of 5000, and a viscosity of 1500 to 2500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and exc...view more ACTFLOW® NE-3000 is apart of a liquid type acrylic polymer grade range. ACTFLOW® NE-3000 has an approximate molecular weight of 5000, and a viscosity of 1500 to 2500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW® grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW® grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less
Request Sample ACTFLOW® UMM-1001 Kowa American Corp/ San Esters Corp. ACTFLOW® UMM-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW® UMM-1001 has an approximate molecular weight of 1000, and a viscosity of 6500 to 9500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and e...view more ACTFLOW® UMM-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW® UMM-1001 has an approximate molecular weight of 1000, and a viscosity of 6500 to 9500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW® grades are recommended as a plasticizer replacements, modifying agents and additive agents. view less
Request Sample ACTFLOW® UT-1001 Kowa American Corp/ San Esters Corp. ACTFLOW® UT-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW® UT-1001 has an approximate molecular weight of 3500, and a viscosity of 2000 to 4000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and exc...view more ACTFLOW® UT-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW® UT-1001 has an approximate molecular weight of 3500, and a viscosity of 2000 to 4000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW® grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW® grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less
Request Sample ACUMIST A-12 Univar Solutions (formerly Nexeo Solutions) ACUMIST A-12 is Micronized Oxidized Polyethylene Homopolymer for use in water based coatings, flexographic and gravure inks and overprint varnishes. It also can be used as a processing aid, matting and antissetling agent in paints.
Request Sample ACUMIST A-6 Univar Solutions (formerly Nexeo Solutions) ACUMIST A-6 is Small particle size Oxidized high density Polyethylene available for water or solvent based thin film applications. Excellent slip, and abrasion resistance., Used in flexographic inks, wood and industrial coatings applications.