| Esperse® Dispersant Containing Resin For Quinacridone Dispersion (Formulation #ETH 72506-1) | Ethox Chemicals | Quinacridone and other types of red pigments are commonly used in the coatings industry as well as in the graphic arts industry for inkjet and high lightfastness applications. Esperse® additives make this difficult-to-disperse pigment easier to process in...view more Quinacridone and other types of red pigments are commonly used in the coatings industry as well as in the graphic arts industry for inkjet and high lightfastness applications. Esperse® additives make this difficult-to-disperse pigment easier to process in aqueous media. Additionally, Esperse® makes increased pigment loadings possible, while reducing pseudoplasticity in the resulting product. view less | |
| Esperse® Dispersant Without Resin For Quinacridone Dispersions (Formulation #ETH 42006-8) | Ethox Chemicals | Quinacridone and other types of red pigments are commonly used in the coatings industry as well as in the graphic arts industry for inkjet and high lightfastness applications. Esperse® additives make this difficult-to-disperse pigment easier to process in...view more Quinacridone and other types of red pigments are commonly used in the coatings industry as well as in the graphic arts industry for inkjet and high lightfastness applications. Esperse® additives make this difficult-to-disperse pigment easier to process in aqueous media. Additionally, Esperse® makes increased pigment loadings possible, while reducing pseudoplasticity in the resulting product. view less | |
| Interior/Exterior Gloss Paint (Formulation #21-10005) | Patcham USA | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...view more Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved- 7+ NS/ <10 μm. view less | |
| Aluminum Silicate, Extender Slurries (Formulation #21-10006) | Patcham USA | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...view more Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. view less | |
| Calcium Carbonate, Extender Slurries (Formulation #21-10006) | Patcham USA | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...view more Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm/ gauge 7+ NS. view less | |
| Interior/Exterior Matt Paint (Formulation #21-10005) | Patcham USA | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...view more Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. 5+ NS/ min. of 20 μm. view less | |
| Interior/Exterior Semi Glossy Paint Waterborne Coatings (Formulation #21-10005) | Patcham USA | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...view more Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. -7 NS/ min. of 15 μm. view less | |
| Talc, Extender Slurries (Formulation #21-10006) | Patcham USA | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...view more Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. view less | |
| Zinc Oxide, Extender Slurries (Formulation #21-10006) | Patcham USA | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...view more Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. view less | |
| Waterborne Alkyd Emulsion Primer (Resydrol) (Formulation #3.1.2) | GRACE | Waterborne Alkyd Emulsion Primer (Resydrol) (Formulation #3.1.2) is a guideline formulation for general industrial applications. Resydrol 4333 is a water-thinnable modified alkyd emulsion neutralised by ammonia and containing a small amount of cosolvent (2.5 wt.-% on total formulation). Borchigel L 75, a diurethane thickening agent, is needed to stabilise the viscosity during storage. The combination of SHIELDEX® anti-corrosive pigments...view more Waterborne Alkyd Emulsion Primer (Resydrol) (Formulation #3.1.2) is a guideline formulation for general industrial applications. Resydrol 4333 is a water-thinnable modified alkyd emulsion neutralised by ammonia and containing a small amount of cosolvent (2.5 wt.-% on total formulation). Borchigel L 75, a diurethane thickening agent, is needed to stabilise the viscosity during storage. The combination of SHIELDEX® anti-corrosive pigments with Alcophor 827 leads to synergistic effects in the corrosion resistance of the primer. view less | |
| Waterborne Styrene-Acrylic Emulsion (Neocryl XK-65) (Formulation #3.4.1) | GRACE | Waterborne Styrene-Acrylic Emulsion (Neocryl XK-65) (Formulation #3.4.1) is guideline formulation for industrial applications. Neocryl XK-65 is a water-borne rheology controlled styrene-acrylic emulsion designed for automotive primer applications. Dynol 604 was the most effective dispersing agent in combination with SHIELDEX® AC 5 anti-corrosive pigments...view more Waterborne Styrene-Acrylic Emulsion (Neocryl XK-65) (Formulation #3.4.1) is guideline formulation for industrial applications. Neocryl XK-65 is a water-borne rheology controlled styrene-acrylic emulsion designed for automotive primer applications. Dynol 604 was the most effective dispersing agent in combination with SHIELDEX® AC 5 anti-corrosive pigments. A small addition of AMP 95 was beneficial for paint stability. Ser-ad FA 379 is a nitrite free flash rust inhibitor which is recommended if problems with flash rust occur. view less | |
| Formulation For Lithol Rubine Dispersion Using Esperse 506 (Formulation #1) | Ethox Chemicals | Formulation For Lithol Rubine Dispersion Using Esperse 506 (Formulation #1). Traditionally, lithol rubine and other metallized azo red aqueous dispersions have a tendency to be unstable due to free metallic cation content of the pigment. Some improvements in formulation have been made with the introduction of HPD 296 dispersing resin from Johnson Polymer. Though the pigments...view more Formulation For Lithol Rubine Dispersion Using Esperse 506 (Formulation #1). Traditionally, lithol rubine and other metallized azo red aqueous dispersions have a tendency to be unstable due to free metallic cation content of the pigment. Some improvements in formulation have been made with the introduction of HPD 296 dispersing resin from Johnson Polymer. Though the pigments have more stability in this grind resin, some degree of pseudoplastic character still exists in the dispersions and inks made from it. The addition of a small amount of Esperse 506 to the formula dramatically reduces the pseudoplastic tendencies while maintaining viscosity and color stability. view less | |
| Formulation For Lithol Rubine Ink Using Esperse 506 (Formulation #1) | Ethox Chemicals | Formulation For Lithol Rubine Ink Using Esperse 506 (Formulation #1). Traditionally, lithol rubine and other metallized azo red aqueous dispersions have a tendency to be unstable due to free metallic cation content of the pigment. Some improvements in formulation have been made with the introduction of HPD 296 dispersing resin from Johnson Polymer. Though the pigments...view more Formulation For Lithol Rubine Ink Using Esperse 506 (Formulation #1). Traditionally, lithol rubine and other metallized azo red aqueous dispersions have a tendency to be unstable due to free metallic cation content of the pigment. Some improvements in formulation have been made with the introduction of HPD 296 dispersing resin from Johnson Polymer. Though the pigments have more stability in this grind resin, some degree of pseudoplastic character still exists in the dispersions and inks made from it. The addition of a small amount of Esperse 506 to the formula dramatically reduces the pseudoplastic tendencies while maintaining viscosity and color stability. view less | |
| Waterborne Styrene-Butadiene Primer (Bayhydrol) (Formulation #3.3) | GRACE | Waterborne Styrene-Butadiene Primer (Bayhydrol) (Formulation #3.3) is a guideline formulation for general industrial applications. Bayhydrol B130 is a water thinnable styrene-butadiene emulsion modified with maleinised oil and neutralised with a mixture of triethylamine and ammonia. Little or no cosolvent is necessary for this resin. The combination with Lipaton SB 5521, styrene-butadiene dispersion leads to improved film properties (higher flexibility and overcoatability) and water resistance. The addition level of zinc oxide is optimum at 1 wt.-%, and is recommended in combination with SHIELDEX® AC 5 anti-corrosive pigments...view more Waterborne Styrene-Butadiene Primer (Bayhydrol) (Formulation #3.3) is a guideline formulation for general industrial applications. Bayhydrol B130 is a water thinnable styrene-butadiene emulsion modified with maleinised oil and neutralised with a mixture of triethylamine and ammonia. Little or no cosolvent is necessary for this resin. The combination with Lipaton SB 5521, styrene-butadiene dispersion leads to improved film properties (higher flexibility and overcoatability) and water resistance. The addition level of zinc oxide is optimum at 1 wt.-%, and is recommended in combination with SHIELDEX® AC 5 anti-corrosive pigments in this case. view less | |
| Pigment Concentrates for Water-Borne Systems - Pigment concentrates for WB systems - Heliogen Blue L6975F PB 15:2 (Formulation #SPF_CTG_029_2203) | Arkema Rheology & Specialty Additives | This pigment concentrates for water-borne systems features Coadis™ 790. | |
| Pigment Concentrates for Water-Borne Systems - Bayferrox (Formulation #130F PR 101) | Arkema Rheology & Specialty Additives | This pigment concentrates for water-borne systems features Coadis™ 790. | |
| Pigment Concentrates for Water-Borne Systems - Raven 5000 PBk 7 (Formulation #SPF_CTG_031_2203) | Arkema Rheology & Specialty Additives | This pigment concentrates for water-borne systems features Coadis™ 790. | |
| Pigment Concentrates for Water Borne Systems - Bayferrox 130F PR 101 (Formulation #SPF_CTG_024_2203_EN) | Arkema Rheology & Specialty Additives | This pigment concentrates for water-borne systems features Coadis™ 790. | |
| Pigment Concentrates for Water-Borne Systems - Heliogen Green L8730 PG 7 (Formulation #SPF_CTG_030_2203) | Arkema Rheology & Specialty Additives | This pigment concentrates for water-borne systems features Coadis™ 790. | |
| Pigment Concentrates for Water-Borne Systems - Irgazin Red L3660HD PR 254 (Formulation #SPF_CTG_027_2203) | Arkema Rheology & Specialty Additives | This pigment concentrates for water-borne systems features Coadis™ 790. | |
| Pigment Concentrates for Water-Borne Systems - Hostaperm Violet RL Special PV 23 (Formulation #SPF_CTG_028_2203) | Arkema Rheology & Specialty Additives | This pigment concentrates for water-borne systems features Coadis™ 790. | |
| Pigment Concentrates for Water Borne Systems - Hansa Brillant Yellow 2GX70 PY 74 (Formulation #SPF_CTG_025_2203_EN) | Arkema Rheology & Specialty Additives | This pigment concentrates for water-borne systems features Coadis™ 790. | |
| Polyester-Melamine Coil Coating Primer (Formulation #2.1) | GRACE | Polyester-Melamine Coil Coating Primer (Formulation #2.1) is a guideline formulation offered to highlight the anti-corrosive and adhesion performance of SHIELDEX® C 303, a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. Dynapol L205 and Dynapol L208 are high molecular weight polyester resins widely used in coil coating primer applications for both building and domestic appliance applications. Cymel 350 is a typical melamine based crosslinker. The cure reponse within this formulation was controlled by the use of Silane A187 (Silane Ester), Epoxy blocked Phosphoric acid (co-catalyst), EDBSA (sulphonic acid co-catalyst) and Halox 650 (Dicarboxylic acid). These components prevent the interaction of SHIELDEX® anti-corrosive pigments...view more Polyester-Melamine Coil Coating Primer (Formulation #2.1) is a guideline formulation offered to highlight the anti-corrosive and adhesion performance of SHIELDEX® C 303, a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. Dynapol L205 and Dynapol L208 are high molecular weight polyester resins widely used in coil coating primer applications for both building and domestic appliance applications. Cymel 350 is a typical melamine based crosslinker. The cure reponse within this formulation was controlled by the use of Silane A187 (Silane Ester), Epoxy blocked Phosphoric acid (co-catalyst), EDBSA (sulphonic acid co-catalyst) and Halox 650 (Dicarboxylic acid). These components prevent the interaction of SHIELDEX® anti-corrosive pigments with the acid catalysts and any acidic functionality on the resins, thus ensuring maximum cure response. view less | |
| Good hiding facade paint, water-based, matte (Formulation #F 10401.1A) | Hoffmann Mineral | This formulation utilizes SILFIT Z 91. | |
| Facade paint, water-based, matte (Formulation #F 10401.1B) | Hoffmann Mineral | This formulation utilizes SILFIT Z 91. | |
| Facade paint, water-based, white, matte (Formulation #FP 2019/1) | Hoffmann Mineral | This formulation utilizes SILLITIN Z 89. | |
| 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) | GRACE | 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) is a guideline formulation offered to illustrate the key features of SHIELDEX® AC 3 Anti-Corrosive Pigment. Beckopox EM 460 together with Phenodur PR 263 is recommended in combination with the standard resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium substrates. The combination of Alcophor 827 with SHIELDEX® anti-corrosive pigments...view more 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) is a guideline formulation offered to illustrate the key features of SHIELDEX® AC 3 Anti-Corrosive Pigment. Beckopox EM 460 together with Phenodur PR 263 is recommended in combination with the standard resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium substrates. The combination of Alcophor 827 with SHIELDEX® anti-corrosive pigments improves hot salt spray resistance over steel substrates. After mixing the two components and letting these prereact for a minimum of 30 minutes, the formulation was tested on solvent degreased cold rolled steel, galvanised steel and aluminium substrates applied to a dry film thickness of 10 –15 μm by bar coater. The formulation was also tested with a 40 micron acrylic/isocyanate top coat. Drying was for 7 days at ambient conditions. view less | |
| Formulation for Lithol Rubine Dispersion Using Esperse 506 (Formulation #2) | Ethox Chemicals | Formulation for Lithol Rubine Dispersion Using Esperse 506 (Formulation #2). | |
| Water-Based Ink Jet Dispersion (Formulation #ETH 21207-1) | Ethox Chemicals | Water-Based Ink Jet Dispersion (Formulation #ETH 21207-1). | |
| Water-Based Ink Jet Dispersion (Formulation #ETH 21207-2) | Ethox Chemicals | Water-Based Ink Jet Dispersion (Formulation #ETH 21207-2). | |
| Formulation For Lithol Rubine Ink Using Esperse 506 (Formulation #2) | Ethox Chemicals | Formulation For Lithol Rubine Ink Using Esperse 506 (Formulation #2). | |
| Interior dispersion paint, dull matte, highly wet-scrub resistant (Formulation #LA006MM31A) | Hoffmann Mineral | This formulation utilizes AKTISIL MAM and AKTIFIT Q. | |
| Interior dispersion paint, dull matte, highly wet-scrub resistant (Formulation #LA006MM30A) | Hoffmann Mineral | This formulation utilizes AKTISIL MAM. | |
| Interior dispersion paint, dull matte, highly wet-scrub resistant (Formulation #LA006MM30AP) | Hoffmann Mineral | This formulation utilizes AKTISIL MAM. | |
| High quality interior dispersion paint, no co-solvent, matte (Formulation #F 10402.3) | Hoffmann Mineral | This formulation utilizes SILFIT Z 91. | |
| Low cost interior dispersion paint, no co-solvent, matte (Formulation #F 10402.2) | Hoffmann Mineral | This formulation utilizes SILFIT Z 91. | |
| Interior dispersion paint, no co-solvent, dull matte (Formulation #F 10402.1) | Hoffmann Mineral | This formulation utilizes SILFIT Z 91. | |
| Easy-to-clean interior dispersion paint, no co-solvent, matte (Formulation #L 00007.2) | Hoffmann Mineral | This formulation utilizes AKTISIL MAM. | |
| 1- Or 2-Component Wash Primer (Formulation #4.1.1) | GRACE | 1- Or 2-Component Wash Primer (Formulation #4.1.1) is a guideline formulation used to exhibit the equivalent performance for SHIELDEX® anti-corrosive pigments compared to a commercial wash primer based on zinc tetroxychromate. The modified epoxy resin Beck...view more 1- Or 2-Component Wash Primer (Formulation #4.1.1) is a guideline formulation used to exhibit the equivalent performance for SHIELDEX® anti-corrosive pigments compared to a commercial wash primer based on zinc tetroxychromate. The modified epoxy resin Beckopox EM 460 is recommended in combination with the standard polyvinylbutyral resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium. The formulation can also be used as a one-component system. In this case, Part B is premixed and subsequently added to part A after dispersion. After mixing the two components and letting these prereact for a minimum of 30 minutes, the formulation was tested on solvent degreased cold rolled steel, galvanised steel and aluminium substrates applied to a dry film thickness of 10 – 15 microns by bar coater. The formulation was also tested with a 40 micron acrylic/isocyanate top coat. view less | |
| Formulation for Phthalo Blue 15:3 Universal (Resin-Free) Dispersion Using Esperse 506/100 Blend | Ethox Chemicals | Formulation for Phthalo Blue 15:3 Universal (Resin-Free) Dispersion Using Esperse 506/100 Blend. | |
| Formulation for Yellow 14 Universal (Resin-Free) Dispersion Using Esperse 506/100 Blend | Ethox Chemicals | Formulation for Yellow 14 Universal (Resin-Free) Dispersion Using Esperse 506/100 Blend. | |
| Formulation for Carbon Black Universal (Resin-Free) Dispersion Using Esperse 100 | Ethox Chemicals | Formulation for carbon black universal (resin free) dispersion using Esperse 100. | |
| Formulation for Lithol Rubine Resin-Free Dispersion using Esperse 100 | Ethox Chemicals | Formulation for Lithol Rubine Resin-Free Dispersion using Esperse 100. | |
| Waterbased Pigmented Acrylic Primer (Formulation #SPF_CTG_003_2203) | Arkema Rheology & Specialty Additives | This waterbased pigmented acrylic primer features Coadis™ 790. | |
| Pigmented Concrete Sealer (Formulation #EPS 2526 BT2) | EPS Materials | Pigmented Concrete Sealer (Formulation #EPS 2526 BT2) formulation information. | |
| White Pigmented Caulk (Formulation #EPS 2224 WPC1) | EPS Materials | White Pigmented Caulk (Formulation #EPS 2224 WPC1) formulation information. | |
| 2K Pigmented Polyurethane Coating (Formulation #API-15) | King Industries, Inc. | This formulation is for a pigmented 2-component acrylic urethane coating with improved flexibility and lower VOC content. | |
| 2K Wood Primer, Pigmented (Formulation #RR 3.20) | Hoffmann Mineral | 2K Wood Primer, Pigmented (Formulation #RR 3.20) featuring SILLITIN V 88. | |
| Interior Flat Paint Formula with 2% Titanium Dioxide Pigment (Formulation #07-1044A) | Ashland | PVC 85% - Acronal* S790 Styrene Acrylic Interior Flat White Paint with 2% pigment. | |
| 2K Pigmented Polyurethane Coating (Formulation #API-16) | King Industries, Inc. | This formulation is for a pigmented 2-component acrylic urethane coating with improved flexibility, lower VOC content, and high hardness. | |
| 2K Pigmented Polyurethane Coating (Formulation #API-17) | King Industries, Inc. | This formulation is for a pigmented 2-component acrylic urethane coating with improved flexibility, lower VOC content, and high hardness. | |
| Sand-Filled Flooring | Huntsman Performance Products | Floors of this type, where an epoxy matrix is used to bind sand and/or other pigment-like fillers into a monolithic floor surface, are very popular, especially for industrial areas. Systems can be formulated to give good abrasion resistance, high impact c...view more Floors of this type, where an epoxy matrix is used to bind sand and/or other pigment-like fillers into a monolithic floor surface, are very popular, especially for industrial areas. Systems can be formulated to give good abrasion resistance, high impact capacity, easy maintenance, and good chemical resistance. view less | |
| Epoxy Coil Coating Primer (Formulation #2.2) | GRACE | Epoxy Coil Coating Primer (Formulation #2.2) is a formulation that utilizes SHIELDEX® C 303, a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. Epikote 1007 and E...view more Epoxy Coil Coating Primer (Formulation #2.2) is a formulation that utilizes SHIELDEX® C 303, a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. Epikote 1007 and Epikote 1009 are standard epoxy resins used in coil coating primer applications. UFR 80 is a typical urea based crosslinker used in these applications. The cure response within this formulation was controlled by the use of Epoxy blocked Phosphoric acid (co-catalyst) and Halox 650 (dicarboxylic-acid co-catalyst). These components prevent the interaction of SHIELDEX® anti-corrosive pigment with the acid catalysts and any acid funtionality on the resin systems, thus ensuring maximum cure response. The SHIELDEX® C 303 anti-corrosive pigment containing epoxy coil primer was applied on Bonder 1303 (ex Chemetall) and Granodine C 108 (ex Henkel) treated galvanised steel test panels. The primer was applied by bar coater to a dry film thickness of 5 – 7 microns. Cure was to a peak metal temperature (PMT) of 216 – 224 °C. A polyester-melamine topcoat was applied to a bar coated dry film thickness of 20 – 25 microns and cured to a PMT of 232 – 241 °C. view less | |
| Metal Wash Primer Made With Busan® 11-M1 | Buckman Laboratories, Inc. | Buckman Laboratories has developed a metal wash primer made with Busan 11-M1, which is a non-lead, non-chromate anticorrosive pigment. This formula is based on the military specification coating MIL-P-15328D entitled “Primer (Wash) Pretreatment Blue.” Thi...view more Buckman Laboratories has developed a metal wash primer made with Busan 11-M1, which is a non-lead, non-chromate anticorrosive pigment. This formula is based on the military specification coating MIL-P-15328D entitled “Primer (Wash) Pretreatment Blue.” This specification is the same as the U.S. Navy formula No. 117-B for metals. The Busan 11-M1 based primer has performed well in tests versus the traditional zinc chromate primer. view less | |
| Seamless Floors - Pigmented Base Coat | Huntsman Performance Products | Epoxies are eminently suitable for seamless, poured-in-place floors. | |
| Waterbased 2K Pigmented Glossy Topcoat (Formulation #SPF_CTG_018_2203) | Arkema Rheology & Specialty Additives | This waterbased top coat features Coapur™ 2025 and Coadis™ 790. | |
| 1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) | GRACE | 1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) is a guideline formulation based on Dynapol L205 (high molecular weight polyester resin) crosslinked with Desmodur BL 3175 (a blocked isocyanate). Dabco T12 (dibutyltindilaurate) was used as the c...view more 1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) is a guideline formulation based on Dynapol L205 (high molecular weight polyester resin) crosslinked with Desmodur BL 3175 (a blocked isocyanate). Dabco T12 (dibutyltindilaurate) was used as the catalyst. SHIELDEX® C 303 is a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. The 1-Pack-Polyurethane primer was tested on Bonder 1303 treated galvanised steel test panels (ex Chemetall) at a bar coated dry film thickness of 5 microns. Cure was to a peak metal temperature (PMT) of 224 °C. A polyester-melamine topcoat was applied to a bar coated dry film thickness of 20 – 25 microns and cured to a PMT of 232 °C. view less | |
| Interior Flat Paint Formula with 2% Titanium Dioxide Pigment (Formulation #07-1043) | Ashland | This formulation is based on PVC 85% and Acronal* 290D. |
