| AddWorks® LXR™ 308 AP | Clariant Plastics & Coatings Ltd. | AddWorks® LXR 308 AP is an optimized mixture of an UV absorber with radical scavenger (HALS), mostly suitable for low color solventborne clearcoats and UV cured coatings applicatons. | |
| Ceridust® 1060 TP | Clariant Plastics & Coatings Ltd. | Ceridust® 1060 TP is a micronized polar modified wax based on renewable resource. | |
| Ceridust® 2051 | Clariant Plastics & Coatings Ltd. | Ceridust® 2051 is a micronized synthetic wax. | |
| Ceridust® 3251 | Clariant Plastics & Coatings Ltd. | Ceridust® 3251 is a micronized, modified polyethylene wax. | |
| Ceridust® 3610 | Clariant Plastics & Coatings Ltd. | Ceridust® 3610 is a micronized high density polyethylene wax. | |
| Ceridust® 3620 | Clariant Plastics & Coatings Ltd. | Ceridust® 3620 is a micronized polyethylene wax. | |
| Ceridust® 3715 | Clariant Plastics & Coatings Ltd. | Ceridust® 3715 is a micronized, polar modified polyethylene wax recommended for solvent and water based coatings and inks. | |
| Ceridust® 3910 | Clariant Plastics & Coatings Ltd. | Ceridust® 3910 is a micronized amide wax. | |
| Ceridust® 3920 F | Clariant Plastics & Coatings Ltd. | Ceridust® 3920 F is a micronized, polytetrafluoroethylene modified polyethylene wax. | |
| Ceridust® 5551 | Clariant Plastics & Coatings Ltd. | Ceridust® 5551 is a micronized, partly saponified ester of montanic acids. | |
| Ceridust® 6721 | Clariant Plastics & Coatings Ltd. | Ceridust® 6721 is a micronized, amide modified polypropylene wax. | |
| Ceridust® 8020 | Clariant Plastics & Coatings Ltd. | Ceridust® 8020 is a micronized, highly modified copolymer wax. | |
| Ceridust® 9202 F | Clariant Plastics & Coatings Ltd. | Ceridust® 9202 F is a micronized polytetrafluoroethylene. | |
| Ceridust® 9205 F | Clariant Plastics & Coatings Ltd. | Ceridust® 9205 F is a micronized polytetrafluorethylene. | |
| Ceridust® 9615 A | Clariant Plastics & Coatings Ltd. | Ceridust® 9615 A is a micronized blend of polyethylene and amide wax. | |
| Ceridust® 9630 F | Clariant Plastics & Coatings Ltd. | Ceridust® 9630 F is a polytetrafluoroethylene modified polyethylene wax. | |
| Exolit® AP 420 | Clariant Plastics & Coatings Ltd. | Exolit® AP 420 is an approx. 45 % clear to cloudy aqueous solution of a short-chain ammonium polyphosphate. | |
| Exolit® AP 422 | Clariant Plastics & Coatings Ltd. | Exolit® AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable. | |
| Exolit® AP 423 | Clariant Plastics & Coatings Ltd. | Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and ...view more Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and non-flammable. view less | |
| Exolit® AP 462 | Clariant Plastics & Coatings Ltd. | Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-parti...view more Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non-hygroscopic and non-flammable. view less | |
| Exolit® AP 740 | Clariant Plastics & Coatings Ltd. | Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlor...view more Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. view less | |
| Exolit® AP 740 F | Clariant Plastics & Coatings Ltd. | Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from c...view more Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. view less | |
| Exolit® AP 750 | Clariant Plastics & Coatings Ltd. | Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability....view more Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat-insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gases, lower formation of toxic smoke gases are of great interest. view less | |
| Exolit® IFR 36 | Clariant Plastics & Coatings Ltd. | Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants...view more Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat insulating effect and reduces further oxygen access. view less | |
| Hordaphos® 124 | Clariant Plastics & Coatings Ltd. | Hordaphos® 124 is a yellowish to brown liquid with an ester-like odour. Solid particles may be precipitated at low temperatures but this process is reversible on warming. Hordaphos® 124 is soluble in common organic solvents such as aliphatic and aromatic ...view more Hordaphos® 124 is a yellowish to brown liquid with an ester-like odour. Solid particles may be precipitated at low temperatures but this process is reversible on warming. Hordaphos® 124 is soluble in common organic solvents such as aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, esters and ketones. It can be emulsified with water. view less | |
| Hordaphos® 222 | Clariant Plastics & Coatings Ltd. | Hordaphos® 222 is a clear, colourless to yellowish liquid with an ester-like odour. It has reacts acidic and can be neutralized with organic and inorganic bases. Hordaphos® 222 is emulsifiable in water and soluble in common organic solvents. | |
| Hordaphos® MDAH | Clariant Plastics & Coatings Ltd. | Hordaphos® MDAH is a clear, colourless to yellowish liquid with an ester-like odour that may darken during storage. The product is soluble in organic solvents. When the ester is neutralized, it is emulsifiable in water. | |
| Hordaphos® MDB | Clariant Plastics & Coatings Ltd. | Hordaphos® MDB is a multi-functional additive which can be used in various applications, especially in printing inks, paints and coatings. It is a clear, colourless to yellowish liquid with an ester-like odour. | |
| Hordaphos® MOB | Clariant Plastics & Coatings Ltd. | Hordaphos® MOB is a multi-functional additive for various applications, especially for printing inks, paints and coatings. It is a clear, colourless to yellowish liquid with an ester-like odour. | |
| Hostaphat® TBEP HQ | Clariant Plastics & Coatings Ltd. | Hostaphat® TBEP HQ is a phosphate ester used as plasticizer for polymer dispersions. | |
| Hostavin® 3051 P | Clariant Plastics & Coatings Ltd. | Hostavin® 3051 is a low molecular weight hindered amine light stabilizer (HALS), characterized by its low volatility and good migration properties and enhanced Tribo effect for powder coating. | |
| Hostavin® 3051-2 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3051-2 disp. is a 52% aqueous dispersion of a low molecular radical scavenger (HALS). It is characterized by its easy incorporation, broad compatibility and low volatility. | |
| Hostavin® 3053 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3053 is the 80% solution of a low molecular weight hindered amine light stabilizer (HALS) in xylene. It is characterized by its excellent solubility, broad compatibility, extremely low volatility and migration stability. | |
| Hostavin® 3055 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3055 is a low molecular weight hindered amine light stabilizer (HALS). It is characterized by its excellent solubility, broad compatibility, extremely low volatility and migration stability. | |
| Hostavin® 3058 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3058 is a non-basic low molecular weight hindered amine light stabilizer (HALS), 100% liquid, characterized by its excellent solubility, broad compatibility in all kind of liquid paints, with low volatility and excellent stabilization efficiency...view more Hostavin® 3058 is a non-basic low molecular weight hindered amine light stabilizer (HALS), 100% liquid, characterized by its excellent solubility, broad compatibility in all kind of liquid paints, with low volatility and excellent stabilization efficiency. view less | |
| Hostavin® 3065 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3065 is a 100% liquid low molecular weight radical scavenger (HALS). It is characterized by its good solubility, broad compatibility and good stabilization efficiency in all kind of coatings. | |
| Hostavin® 3070 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3070 DISP is a 52% aqueous dispersion of a polymeric hindered amine light stabilizer (HALS), designed for UV stabilization of paints and clearcoats. This sustainable HALS is characterized by its broad compatibility, high resistance to migration ...view more Hostavin® 3070 DISP is a 52% aqueous dispersion of a polymeric hindered amine light stabilizer (HALS), designed for UV stabilization of paints and clearcoats. This sustainable HALS is characterized by its broad compatibility, high resistance to migration and low extraction, making it particularly suitable for plastic coatings and architectural façade coatings. Hostavin® 3070 DISP has been awarded with an EcoTain® label resulting from its excellent toxicological profile. view less | |
| Hostavin® 3070 P | Clariant Plastics & Coatings Ltd. | Hostavin® 3070 P is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials, paints and clear coats. This HALS is characterized by its broad compatibility and excellent resistance to migration and unique...view more Hostavin® 3070 P is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials, paints and clear coats. This HALS is characterized by its broad compatibility and excellent resistance to migration and unique solubility in solvent-borne coatings. view less | |
| Hostavin® 3206 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3206 is a highly effective, oxalanilide based, liquid UV-B absorber. It is characterised by its excellent compatibility in all solventborne coatings, with an improved resistance to migration and low volatility, under normal stoving conditions as...view more Hostavin® 3206 is a highly effective, oxalanilide based, liquid UV-B absorber. It is characterised by its excellent compatibility in all solventborne coatings, with an improved resistance to migration and low volatility, under normal stoving conditions as well as low color in wet-paint. view less | |
| Hostavin® 3212 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3212 is a 2:1 synergistic mixture of an oxalanilide based UV absorber with a low molecular weight HALS. | |
| Hostavin® 3225-2 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3225-2 disp. is a 52 % aqueous dispersion of a mixture of a halogenated benzotriazole UV-absorber with a radical scavenger (HALS). | |
| Hostavin® 3315 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3315 DISP is a 52% aqueous dispersion of a benzotriazole UV absorber, designed for UV stabilization of paints and clearcoats. This sustainable UV absorber is characterized by its broad compatibility, high resistance to migration and low extracti...view more Hostavin® 3315 DISP is a 52% aqueous dispersion of a benzotriazole UV absorber, designed for UV stabilization of paints and clearcoats. This sustainable UV absorber is characterized by its broad compatibility, high resistance to migration and low extraction, making it particularly suitable for wood and plastics coatings. Hostavin 3315 DISP has been awarded with an EcoTain label resulting from its excellent toxicological profile. view less | |
| Hostavin® 3326 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3326 disp. is a 52 % aqueous dispersion of a broad apsorption benzotriazole UV-absorber. It is characterized by its excellent compatibility and high efficiency in waterborne paints and varnishes, especially for protection of exterior wood coatin...view more Hostavin® 3326 disp. is a 52 % aqueous dispersion of a broad apsorption benzotriazole UV-absorber. It is characterized by its excellent compatibility and high efficiency in waterborne paints and varnishes, especially for protection of exterior wood coatings. view less | |
| Hostavin® 3326 P | Clariant Plastics & Coatings Ltd. | Hostavin® 3326 is an UV absorber with broad absorption. Besides cooling application it is mainly used as an UV stabilizer for a wide range of plastics. | |
| Hostavin® VSU P | Clariant Plastics & Coatings Ltd. | Hostavin® VSU is an Oxalanilide UV absorber, a low volatile polar substance with good heat stability. It is resistant to discoloration with metal ions, e.g. from polymerisation catalyst residues, fillers or from contact surfaces. Hostavin® VSU absorbs the...view more Hostavin® VSU is an Oxalanilide UV absorber, a low volatile polar substance with good heat stability. It is resistant to discoloration with metal ions, e.g. from polymerisation catalyst residues, fillers or from contact surfaces. Hostavin® VSU absorbs the UV light especially in the UV-B range, and is therefore a stabilizer of choice for combinations with optical brighteners and for UV curing systems. view less | |
| Licocene® PE 4201 powder | Clariant Plastics & Coatings Ltd. | Licocene® PE 4201 powder is a low viscous, non-polar polyethylene wax that is a highly efficient lubricant. | |
| Licocene® PE 5301 granules | Clariant Plastics & Coatings Ltd. | Licocene® PE 5301 granules is a low viscosity, high melting point Metallocene catalyzed Polyethylene wax. | |
| Licocene® PE MS 431 granules | Clariant Plastics & Coatings Ltd. | Licocene® PE MS 431 granules is a stabilized maleic anhydride grafted polyethylene wax. | |
| Licocene® PP MS 641 granules TP | Clariant Plastics & Coatings Ltd. | Licocene® PP MS 641 granules TP is a stabilized maleic anhydride grafted polypropylene wax. | |
| Licowax® 371 FP | Clariant Plastics & Coatings Ltd. | Licowax® 371 FP is an oxidized ethylene vinyl acetate (EVA) wax. | |
| Licowax® E flakes | Clariant Plastics & Coatings Ltd. | Licowax® E flakes is an ester of montanic acids with multifunctional alcohols. The montanic acids contained in raw montan wax are straightchain, unbranched monocarboxylic acids with a chain length in the range of C28-C32. As a result of the long chain the...view more Licowax® E flakes is an ester of montanic acids with multifunctional alcohols. The montanic acids contained in raw montan wax are straightchain, unbranched monocarboxylic acids with a chain length in the range of C28-C32. As a result of the long chain these montanic acids have a high thermostability and a low volatility as well as a low tendency to migration. view less | |
| Licowax® KPS flakes | Clariant Plastics & Coatings Ltd. | Licowax® KPS flakes is an ester of montanic acids with multifunctional alcohols. | |
| Licowax® KSL flakes | Clariant Plastics & Coatings Ltd. | Licowax® KSL flakes is an ester of montanic acids with multifunctional alcohols. | |
| Licowax® LP flakes | Clariant Plastics & Coatings Ltd. | Licowax® LP flakes is a montanic acid wax. | |
| Licowax® NC flakes | Clariant Plastics & Coatings Ltd. | Licowax® NC flakes is a montan-based acid wax. | |
| Licowax® OP flakes | Clariant Plastics & Coatings Ltd. | Licowax® OP flakes is a partly saponified ester wax of montanic acids used for a wide variety of polymers as multifunctional lubricant and dispersing agent. Suitable for PVC, engineering resins, thermosets etc. | |
| Licowax® OP powder | Clariant Plastics & Coatings Ltd. | Licowax® OP powder is a partly saponified ester wax of montanic acids used for a wide variety of polymers as multifunctional lubricant and dispersing agent. Suitable for PVC, engineering resins, thermosets etc. | |
| Licowax® PE 190 powder | Clariant Plastics & Coatings Ltd. | Licowax® PE 190 powder is a non-polar high density polyethylene with low molecular weight. | |
| Licowax® PED 153 | Clariant Plastics & Coatings Ltd. | Licowax® PED 153 is an oxidized, high density polyethylene wax. | |
| Licowax® PED 191 powder | Clariant Plastics & Coatings Ltd. | Licowax® PED 191 powder is an oxidized, high density polyethylene wax with high molecular weight. | |
| Licowax® PED 521 granules | Clariant Plastics & Coatings Ltd. | Licowax® PED 521 granules is an oxidized polyethylene wax. | |
| Licowax® PED 522 granules | Clariant Plastics & Coatings Ltd. | Licowax® PED 522 granules is an oxidized, high density polyethylene wax. | |
| Licowax® S flakes | Clariant Plastics & Coatings Ltd. | Licowax® S flakes is an acid wax used in a wide variety of applications, such as an external release agent (e.g. for thermosets and engineering plastics), emulsifier (e.g. for paraffin) and additives in care products (for its protection and gloss properti...view more Licowax® S flakes is an acid wax used in a wide variety of applications, such as an external release agent (e.g. for thermosets and engineering plastics), emulsifier (e.g. for paraffin) and additives in care products (for its protection and gloss properties). view less | |
| Licowax® SW flakes | Clariant Plastics & Coatings Ltd. | Licowax® SW flakes is a montanic acid wax. | |
| Special-Primer AP 1010 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, an...view more Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. view less | |
| Special-Primer AP 1030 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used ...view more Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used to solve adhesion problems to flexible substrates like thermoplastic elastomers, thermoplastic polyurethane and EPDM (e.g. "Vistalon" from Exxon, "Nordel" from DuPont). After coating with a thin film of Special-Primer AP 1030, these flexible substrates can be painted, printed, glued or labelled. Special-Primer AP 1030 is tinted white for black substrates. view less | |
| Special-Primer PE 6800 | Worlée-Chemie G.m.b.H. | Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Spec...view more Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Special Primer PE 6800 is suitable as an adhesion promoter for polyethylene of high, medium and low density (lowdensity-polyethylene). This product appears as a yellowish to brown, low viscous liquid. view less | |
| Special-Primer PP 3200 W | Worlée-Chemie G.m.b.H. | Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brown...view more Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brownish turbid liquid. Special-Primer PP 3200 W can be used as adhesion promoter by incorporation in adhesives, inks and paints in case of sufficient compatibility or diluted down to 10% solid content as primer. view less | |
| Special-Primer PP 5130 (2.5% I Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled po...view more Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 5130 (5% In Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlo...view more Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlorinated rubber and some vinyl copolymer resins. It is only soluble in aromatics and chlorinated hydrocarbons. There is limited solubility in aliphatic hydrocarbons. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 7550 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in a...view more Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in aromatics and chlorinated hydrocarbons. It is possible to blend with other solvents like esters, ketones etc.. This product appears as a yellowish, low viscous liquid. view less | |
| Special-Primer PP 7560 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Sp...view more Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Special-Primer PP 7560 is superior to Special-Primer PP 5130. This product appears as a yellowish, low viscous liquid. view less | |
| Tonerwax P 110 | Clariant Plastics & Coatings Ltd. | Tonerwax P 110 is a hydrocarbon wax with sharp melting point. | |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems ...view more WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems including NC- and acid curing wood lacquers, yacht varnishes, parquet lacquers, paper coatings and leather finishes. W´Add 311 imparts mar-resistance to paint and lacquer surface, gives a smooth satin feel to the surface, improves flow-out, reduces orange-peel and Benard's cell effect. view less | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surfa...view more WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surface imperfections like Benard's cells, brush marks etc. are avoided. Typical application fields are air drying alkyd resin paints for decorative, DIY and industrial application. view less | |
| WorléeAdd 312 | Worlée-Chemie G.m.b.H. | WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to incr...view more WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to increase the mar resistance of water and solvent based air drying and stoving paint films by reducing surface tension of the coating and imparting a high degree of slip and improving flow out. view less | |
| WorléeAdd 315 | Worlée-Chemie G.m.b.H. | WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a cle...view more WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a clear to slightly yellow liquid. view less | |
| WorléeAdd 327 | Worlée-Chemie G.m.b.H. | WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total fo...view more WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total formulation). view less | |
| WorléeAdd 330 | Worlée-Chemie G.m.b.H. | WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended...view more WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended when in water thinnable materials an additional butyl glycol content is undesirable. view less | |
| WorléeAdd 345 | Worlée-Chemie G.m.b.H. | WorléeAdd 345 is a special additive for improving the substrate wetting of aqueous systems. It is based on dioctylsulfosuccinate and a silicone copolyether. Typical applications are coatings on wood, printing inks, care products etc.. This product appears...view more WorléeAdd 345 is a special additive for improving the substrate wetting of aqueous systems. It is based on dioctylsulfosuccinate and a silicone copolyether. Typical applications are coatings on wood, printing inks, care products etc.. This product appears as a clear to slightly turbid yellowish liquid. view less | |
| WorléeAdd 351 | Worlée-Chemie G.m.b.H. | WorléeAdd 351 is a high molecular silicone additive for improving the surface properties of water thinnable paints and printing inks. W´Add 351 improves scratch resistance and surface smoothness of water thinnable paints and printing inks as well as silk ...view more WorléeAdd 351 is a high molecular silicone additive for improving the surface properties of water thinnable paints and printing inks. W´Add 351 improves scratch resistance and surface smoothness of water thinnable paints and printing inks as well as silk gloss to glossy latex paints. This product can also be used for paints and printing inks based on alcohols. view less | |
| WorléeAdd 352 | Worlée-Chemie G.m.b.H. | WorléeAdd 352 is a high molecular silicone additive for the improvement of surface properties of water thinnable lacquers and printing inks. It appears as a turbid, creamy, still-flowing substance. W´Add 352 improves scratch resistance of water thinnable ...view more WorléeAdd 352 is a high molecular silicone additive for the improvement of surface properties of water thinnable lacquers and printing inks. It appears as a turbid, creamy, still-flowing substance. W´Add 352 improves scratch resistance of water thinnable lacquers and printing inks as well as satin glossy up to glossy latex prints. W´Add 352 can be used for alcohol based lacquers and printing inks. view less | |
| WorléeAdd 356 | Worlée-Chemie G.m.b.H. | WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stovin...view more WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stoving enamels and metallic car paints. W´Add 356 is thermostable. view less | |
| WorléeAdd 371 | Worlée-Chemie G.m.b.H. | WorléeAdd 371 is a silicone based, highly effective antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 371 prevents foam and air bubbles at the production and application of solvent based and high solids coat...view more WorléeAdd 371 is a silicone based, highly effective antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 371 prevents foam and air bubbles at the production and application of solvent based and high solids coating systems and printing inks. It is especially recommended in thixotropic PUR systems. view less | |
| WorléeAdd 372 | Worlée-Chemie G.m.b.H. | WorléeAdd 372 is a silicone based antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 372 is also very well suited for high solids. W´Add 372 is very effective at concentrations of 0.05 - 0.80% and can be adde...view more WorléeAdd 372 is a silicone based antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 372 is also very well suited for high solids. W´Add 372 is very effective at concentrations of 0.05 - 0.80% and can be added at any process stage during manufacture. If lower concentration is desired, it may be diluted with ketone or ester solvents. view less | |
| WorléeAdd 373 N | Worlée-Chemie G.m.b.H. | WorléeAdd 373 N is a silicone containing additive with multifunctional properties. It is used in solvent based coatings mainly to achieve surface smoothness and mar resistance. At the same time W´Add 373 N works as antifoam agent and avoids surface imperf...view more WorléeAdd 373 N is a silicone containing additive with multifunctional properties. It is used in solvent based coatings mainly to achieve surface smoothness and mar resistance. At the same time W´Add 373 N works as antifoam agent and avoids surface imperfections. This product appears as a clourless, low viscous liquid. view less | |
| WorléeAdd 412 | Worlée-Chemie G.m.b.H. | WorléeAdd 412 is a solvent free compatibility agent based on a modified copolymer for easier incorporation of driers into water-borne alkyd paints. It improves the compatibility of driers with alkyd resin emulsions and makes the equal distribution in the ...view more WorléeAdd 412 is a solvent free compatibility agent based on a modified copolymer for easier incorporation of driers into water-borne alkyd paints. It improves the compatibility of driers with alkyd resin emulsions and makes the equal distribution in the system easier. By this, precipitation can be avoided. view less | |
| WorléeAdd 422 | Worlée-Chemie G.m.b.H. | WorléeAdd 422 is a quarternary ammonia salt solution for reducing the electrical resistance of solvent based systems. W´Add 422 does not cause any drying deceleration and has no negative influence on the protection against corrosion. This product is solu...view more WorléeAdd 422 is a quarternary ammonia salt solution for reducing the electrical resistance of solvent based systems. W´Add 422 does not cause any drying deceleration and has no negative influence on the protection against corrosion. This product is soluble in water, alcohols and ketones. It is partially soluble in aliphatic and aromatic hydrocarbons and esters. view less | |
| WorléeAdd 428 | Worlée-Chemie G.m.b.H. | WorléeAdd 428 is a silicone free additive for the manufacture of structured coil coatings. The formation of the orange peel effect is achieved only by adding W´Add 428. No wax addition is necessary. The structure is achieved by adding W´Add 428 to the coi...view more WorléeAdd 428 is a silicone free additive for the manufacture of structured coil coatings. The formation of the orange peel effect is achieved only by adding W´Add 428. No wax addition is necessary. The structure is achieved by adding W´Add 428 to the coil coating primer. Minimum film thickness should be 15 µ. view less | |
| WorléeAdd 456 | Worlée-Chemie G.m.b.H. | WorléeAdd 456 is a nitrite-free organic corrosion inhibitor for aqueous lacquers. W´Add 456 is used in aqueous systems as an anti flash rust agent as well as for improving long term corrosion resistance. Application fields are acrylic dispersions, alkyd e...view more WorléeAdd 456 is a nitrite-free organic corrosion inhibitor for aqueous lacquers. W´Add 456 is used in aqueous systems as an anti flash rust agent as well as for improving long term corrosion resistance. Application fields are acrylic dispersions, alkyd emulsion, one-component and two-component PU systems. This product appears as a colourless to slightly yellowish liquid. view less | |
| WorléeAdd 480 N | Worlée-Chemie G.m.b.H. | WorléeAdd 480 N is a special epoxy ester to improve the adhesion of aqueous baking enamels and polyurethane systems on metallic substrates. It improves the adhesion on metal, e. g. steel, zinc coating, aluminium, tin plate and also on glass. Preferred app...view more WorléeAdd 480 N is a special epoxy ester to improve the adhesion of aqueous baking enamels and polyurethane systems on metallic substrates. It improves the adhesion on metal, e. g. steel, zinc coating, aluminium, tin plate and also on glass. Preferred application fields are aqueous baking enamels for example on basis polyester, alkyd or acrylate in combination with amino resin or blocked polyisocyanate as well as air and oven drying two component polyurethane systems. W´Add 480 N is incorporated in the lacquer by thoroughly stirring. The optimal addition quantity empirically is 1.0 - 5.0% calculated on total formulation and should be determined by a serial trial. view less | |
| WorléeAdd 486 | Worlée-Chemie G.m.b.H. | WorléeAdd 486 is a special polyester resin used to improve the adhesion of solvent based stoving and 2 component PUR systems. The addition of W´Add 486 improves the adhesion on different substrates, like metals, melamine resin coated chipboards, etc. Also...view more WorléeAdd 486 is a special polyester resin used to improve the adhesion of solvent based stoving and 2 component PUR systems. The addition of W´Add 486 improves the adhesion on different substrates, like metals, melamine resin coated chipboards, etc. Also the elasticity of paint systems can be improved by W´Add 486. view less | |
| WorléeAdd 487 | Worlée-Chemie G.m.b.H. | WorléeAdd 487 is a special polyester resin used to improve the adhesion of solvent-based air drying, stoving and 2 component PUR-systems. The addition of W ́Add 487 improves the adhesion on different substrates like metals, melamine resin coated chipboard...view more WorléeAdd 487 is a special polyester resin used to improve the adhesion of solvent-based air drying, stoving and 2 component PUR-systems. The addition of W ́Add 487 improves the adhesion on different substrates like metals, melamine resin coated chipboards, etc. It can also improve the elasticity of paint systems. This product appears as a colourless, light yellow liquid. view less | |
| WorléeAdd 602 | Worlée-Chemie G.m.b.H. | WorléeAdd 602 is an antifoam agent and defoamer mainly for 2 compound PUR and epoxy resin coatings. W´Add 602 should be added to the binder during production before the addition of other additives. | |
| WorléeAdd 603 | Worlée-Chemie G.m.b.H. | WorléeAdd 603 is a polyacrylate modified silicone defoamer for the use in solvent based and solvent free coatings of different compositions. W´Add 603 can be used as antifoam agent and defoamer in very different systems. The well-balanced composition impr...view more WorléeAdd 603 is a polyacrylate modified silicone defoamer for the use in solvent based and solvent free coatings of different compositions. W´Add 603 can be used as antifoam agent and defoamer in very different systems. The well-balanced composition improves normal substrate wetting as well as flow at the same time. The active ingredients correspond to FDA-§ 175.300. Application fields are can coatings, airdrying industrial coatings, wood and furniture coatings, solvent free UV-systems as well as EP-coatings. view less | |
| WorléeAdd 604 N | Worlée-Chemie G.m.b.H. | WorléeAdd 604 N is a silicone containing defoamer and antifoam additive especially for water thinnable wood and parquet lacquers based on acrylic emulsions and/or PUR emulsions. It shows good effectiveness on all surfaces and good compatibility with vario...view more WorléeAdd 604 N is a silicone containing defoamer and antifoam additive especially for water thinnable wood and parquet lacquers based on acrylic emulsions and/or PUR emulsions. It shows good effectiveness on all surfaces and good compatibility with various emulsion polymers. The product can be directly dispersed into aqueous systems and can be used in basic as well as in acidic lacquers. Sufficient shear forces should be used. view less | |
| WorléeAdd 677 | Worlée-Chemie G.m.b.H. | WorléeAdd 677 is a silicone-free and aromatic-free defoamer and anti-foam agent for solvent based and solvent free systems. Typical application fields are wood lacquers (NC, 2 component-PU, acid hardening, incl. curtain coatings), decorative and house pai...view more WorléeAdd 677 is a silicone-free and aromatic-free defoamer and anti-foam agent for solvent based and solvent free systems. Typical application fields are wood lacquers (NC, 2 component-PU, acid hardening, incl. curtain coatings), decorative and house paints, 2 component-EP-systems, industrial coatings, printing inks etc..This product appears as a clear, slightly yellowish liquid. view less | |
| WorléeAdd 678 | Worlée-Chemie G.m.b.H. | WorléeAdd 678 is a silicone free defoamer and anti-foam agent for solvent based and solvent free systems. W´Add 678 is mainly used to avoid foam and as defoaming agent in one- and two component PUR paints and coatings. This product is a clear, low viscous...view more WorléeAdd 678 is a silicone free defoamer and anti-foam agent for solvent based and solvent free systems. W´Add 678 is mainly used to avoid foam and as defoaming agent in one- and two component PUR paints and coatings. This product is a clear, low viscous liquid. view less | |
| WorléeAdd 781 | Worlée-Chemie G.m.b.H. | WorléeAdd 781 is a silicone free leveling additive. It may be used in solved based systems such as isocyanate- and amino resin cross linking top coats to improve the levelling. In two-pack-PU-systems the addition of W´Add 781 enables the application of hi...view more WorléeAdd 781 is a silicone free leveling additive. It may be used in solved based systems such as isocyanate- and amino resin cross linking top coats to improve the levelling. In two-pack-PU-systems the addition of W´Add 781 enables the application of high film thickness with reduced blister building. view less | |
| WorléeCryl® 7107 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7107 is a very hard methacrylic copolymer emulsion supplied as 40% in water. It improves the surface properties in water soluble lacquer systems, and it has excellent compatibility with other polymer emulsion. This product effects improvement ...view more WorléeCryl® 7107 is a very hard methacrylic copolymer emulsion supplied as 40% in water. It improves the surface properties in water soluble lacquer systems, and it has excellent compatibility with other polymer emulsion. This product effects improvement in film hardness, sanding, blocking resistance and stackability. view less |
