| Ammonium Chloride | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Ammonium Chloride, in the form of a white powder, is an acid salt of ammonia. This product can be used in adhesives and as a constituent of dyeing processes. It contains no more than 0.70% water, and its pH lies between 4.0 and 5.8. | |
| Antioxidant SN-1 | Tiarco Chemical | Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds...展开 Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds, and the maximum benefits are best noticed when used in combination with a primary antioxidant in natural and synthetic polymers. It is used in light colored or black compounds such as carpet backing foams, scrim adhesives, SBR latex stabilization, rubber based adhesives, footwear compounds and mechanical goods, and more. 收起 | |
| Caustic Soda | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Caustic Soda, in the form of a glossy white granule or flake, is a dried form of lye. This product can be used in paper dyeing. It contains no more than 0.008% iron and no more than 0.05% sodium chloride. | |
| Chrome Oxide Green, Low Cr6+ Grade | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Chrome Oxide Green, Low Cr6+ Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. This product can be used as a colorant in enamels and porcelain ware, as well as in sun-proof coatings and currency printing ap...展开 Chrome Oxide Green, Low Cr6+ Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. This product can be used as a colorant in enamels and porcelain ware, as well as in sun-proof coatings and currency printing applications. Its pH lies between 5 and 8. 收起 | |
| Chrome Oxide Green, Metallurgical Grade | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Chrome Oxide Green, Metallurgical Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. It can be used as a colorant in enamels and porcelain ware, as well as in sun-proof coatings and currency printing applica...展开 Chrome Oxide Green, Metallurgical Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. It can be used as a colorant in enamels and porcelain ware, as well as in sun-proof coatings and currency printing applications. It contains no more than 0.01% sulfur and no more than .1% iron oxide. 收起 | |
| Chrome Oxide Green, Pigment Grade | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Chrome Oxide Green, Pigment Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. This product can be used as a colorant for enamels and porcelain ware, as well as in sun-proof coatings and currency printing ap...展开 Chrome Oxide Green, Pigment Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. This product can be used as a colorant for enamels and porcelain ware, as well as in sun-proof coatings and currency printing applications. Its pH lies between 6 and 8. 收起 | |
| Chrome Oxide Green, Refractory Grade | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Chrome Oxide Green, Refractory Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. This product can be used as a colorant for enamels and porcelain ware, as well as in sun-proof coatings and currency printing...展开 Chrome Oxide Green, Refractory Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. This product can be used as a colorant for enamels and porcelain ware, as well as in sun-proof coatings and currency printing applications. It contains no more than .15% water. 收起 | |
| Chrome Oxide Green, Standard Grade | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Chrome Oxide Green, Standard Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. This product can be used as a colorant in enamels and porcelain ware, as well as for sun-proof coatings and currency printing a...展开 Chrome Oxide Green, Standard Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. This product can be used as a colorant in enamels and porcelain ware, as well as for sun-proof coatings and currency printing applications. Its pH lies between 5 and 8. 收起 | |
| Chromic Acid | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Chromic Acid, in the form of a dark purplish red-flake, is a metallic acid. This product can be used in sealing phosphate coatings applied to iron or steel. Its melting point is 197 degrees Celsius, and is soluble in water. This product is both poisono...展开 Chromic Acid, in the form of a dark purplish red-flake, is a metallic acid. This product can be used in sealing phosphate coatings applied to iron or steel. Its melting point is 197 degrees Celsius, and is soluble in water. This product is both poisonous and corrosive. 收起 | |
| DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...展开 DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...展开 DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® A5M30 | AlzChem AG | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...展开 DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. 收起 | |
| DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...展开 DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. 收起 | |
| DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem AG | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem AG | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...展开 DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. 收起 | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem AG | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem AG | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem AG | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem AG | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem AG | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem AG | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...展开 DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR500 | AlzChem AG | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...展开 DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. 收起 | |
| DYHARD® UR800 | AlzChem AG | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem AG | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® URAcc57 | AlzChem AG | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| Fluorescent Yellow 8g | Nanjing Longxi Chemical Co., Ltd. | Fluorescent Yellow 8g, in the form of a yellow powder, has a molecular weight of 452.55. This product has main applications in coating and paint. | |
| Maleic Anhydride | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Maleic Anhydride, in the form of a white flake or briquette, is a solidified acid. This product sublimates easily and can be used in paints. Its solidification point is 52.4 degrees Celsius, and its relative density is 1.48 at 20 degrees Celsius if soli...展开 Maleic Anhydride, in the form of a white flake or briquette, is a solidified acid. This product sublimates easily and can be used in paints. Its solidification point is 52.4 degrees Celsius, and its relative density is 1.48 at 20 degrees Celsius if solid and 1.30 at 70 degrees Celsius if liquid. 收起 | |
| Octocure 462 | Tiarco Chemical | Octocure 462 is an aqueous zinc oxide dispersion readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing SBR and natural latex rubber. | |
| Octocure 487 | Tiarco Chemical | Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product m...展开 Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product may also be used at lower concentrations as a slow precure accelerator in natural latex. 收起 | |
| Octocure 530 | Tiarco Chemical | Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accel...展开 Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accelerator in SBR, neoprene, and nitrile latices. This product is typically used as an activator for MBT and other thiazole accelerators, or in conjunction with dithiocarbamates or thiocarbanilides. 收起 | |
| Octocure 551 | Tiarco Chemical | Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usu...展开 Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usually used in conjunction with diphenyl guanidine. 收起 | |
| Octocure 573 | Tiarco Chemical | Octocure 573 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber. | |
| Octocure 803 | Tiarco Chemical | Octocure 803 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber. | |
| Octocure ZBZ-42 | Tiarco Chemical | Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary acc...展开 Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary accelerators such as ZMBT. Octocure ZBZ-42 is ideal for vulcanization processes where the formation of volatile nitrosoamines needs to be reduced. 收起 | |
| Octocure ZDB-100 | Tiarco Chemical | Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This prod...展开 Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This product can also be applied in low doses in non-curing natural and SBR adhesive compounds as a non-discoloring antioxidant. 收起 | |
| Octocure ZDB-50 | Tiarco Chemical | Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus...展开 Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus. 收起 | |
| Octocure ZDB-50 CF | Tiarco Chemical | Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and h...展开 Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and high modulus. This product can also be used at low doses in noncuring natural and SBR latex compounds as a non-discoloring antioxidant. 收起 | |
| Octocure ZDE-50 | Tiarco Chemical | Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts z...展开 Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts zinc mercaptobenzothiazole. 收起 | |
| Octocure ZDIB-50 | Tiarco Chemical | Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high mo...展开 Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high modulus. As a secondary accelerator, this product works well with thiurams, thiazoles, and guanidines. Octocure ZDIB-50 may be used at low levels to increase cure rates of slower curing systems. It also serves as an effective free-radical emulsion polymerization shortstop in styrene-butadiene rubber (SBR) and acrylonitrile butadiene rubber (NBR) elastomer production. 收起 | |
| Octocure ZDM-50 | Tiarco Chemical | Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suit...展开 Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suited for use as an additive in the production of latex and latex based products. 收起 | |
| Octocure ZMBT-50 | Tiarco Chemical | Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This...展开 Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. 收起 | |
| Octocure ZMBT-50 CF | Tiarco Chemical | Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithioca...展开 Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. 收起 | |
| Octoguard FR-11 DF | Tiarco Chemical | Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...展开 Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 收起 | |
| Octoguard FR-13 DF | Tiarco Chemical | Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...展开 Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 收起 | |
| Octolite 424-50 | Tiarco Chemical | Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant pro...展开 Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in synthetic and natural latex polymers. This product is recommended for use in carboxylated SBR latex compounds and adhesives. 收起 | |
| Octolite 497 | Tiarco Chemical | Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat...展开 Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat, ultraviolet light, and oxidation. This dispersion is milled to a fine particle size for maximum activity. Octolite 497 is well suited for use in the production of food packaging adhesives and with repeated use rubber products. 收起 | |
| Octolite 544 CF | Tiarco Chemical | Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, a...展开 Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, and other latex systems. It is also particularly beneficial in protecting against degradation by trace metals such as copper and manganese. 收起 | |
| Octolite 640 | Tiarco Chemical | Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protectio...展开 Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protection in SBR, natural, and neoprene latex polymers. Octolite 640 is particularly useful for providing superior protection against high-temperature degradation in certain latex polymer compounds. 收起 | |
| Octolite 647 | Tiarco Chemical | Octolite 647 is a yellow to tan aqueous dispersion of polymeric quinoline derivative. This general-purpose semi-staining antioxidant is frequently used in latex compounding to impart high temperature resistance. It also improves ozone resistance of many p...展开 Octolite 647 is a yellow to tan aqueous dispersion of polymeric quinoline derivative. This general-purpose semi-staining antioxidant is frequently used in latex compounding to impart high temperature resistance. It also improves ozone resistance of many polymers. It is non-blooming and of high durability. This product is typically used as a rubber antioxidant stabilizer for natural, butadiene, chloroprene, and nitile latex. Octolite 647 is also used as a corrosion inhibitor and preservative (it retards oxidation, deterioration, and rancidity). 收起 | |
| Octolite 668 | Tiarco Chemical | Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH ran...展开 Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH range for direct addition to latex. It exhibits low volatility and excellent frothability. Octolite 668 is also highly effective in polychloroprene polymers, providing protection against degradation due to heat, light, and oxygen. 收起 | |
| Octolite 806 | Tiarco Chemical | Octolite 806 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (dilaurylthiodipropionate). It provides highly efficient stabilization and antioxidant protection. Octolite 806 is recommended for u...展开 Octolite 806 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (dilaurylthiodipropionate). It provides highly efficient stabilization and antioxidant protection. Octolite 806 is recommended for use in butadiene/styrene and synthetic latex compounds as well as SBR and natural rubber compounds. 收起 | |
| Octolite 809 | Tiarco Chemical | Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-...展开 Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-milled to a fine particle size for maximum activity. Octolite 809 is essentially non-staining but can cause some slight pink discoloration in certain applications. 收起 | |
| Octolite AO-50 | Tiarco Chemical | Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protectio...展开 Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protection to synthetic and natural latex polymers. Octolite AO-50 is ideally suited for use in carboxylated SBR latex compounds and adhesives. 收起 | |
| Octolite WL | Tiarco Chemical | Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against ...展开 Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against the effects of heat, ultraviolet light, and oxidation. Octolite WL is well suited for use in the production of food packaging adhesives and with repeated use rubber products. 收起 | |
| Octopol NB-47 | Tiarco Chemical | Octopol NB-47 is an ultra-fast accelerator composed of sodium dibutyldithiocarbamate. It is ideal for use in natural latex, SBR, and CR latex compounds, where it activates thiazoles in the latex cure system. This product is of particular interest in latex...展开 Octopol NB-47 is an ultra-fast accelerator composed of sodium dibutyldithiocarbamate. It is ideal for use in natural latex, SBR, and CR latex compounds, where it activates thiazoles in the latex cure system. This product is of particular interest in latex compounds where the zinc level from zinc dithiocarbamates can be reduced. 收起 | |
| Octosol 449 | Tiarco Chemical | Octosol 449 is a potassium oleate soap in the form of a yellow to amber liquid. It is prepared from fine oleic acid (red oil) reacted with a minimum excess of potassium hydroxide (KOH, potash). This fatty acid soap plays an important role in latex compoun...展开 Octosol 449 is a potassium oleate soap in the form of a yellow to amber liquid. It is prepared from fine oleic acid (red oil) reacted with a minimum excess of potassium hydroxide (KOH, potash). This fatty acid soap plays an important role in latex compounds by contributing to mechanical and chemical stability. Octosol 449 may be used as a primary frothing aid in gelled latex foam compounds. It may also used as a dispersant for fillers, dry chemicals, and pigments. 收起 | |
| Octosol 571 | Tiarco Chemical | Octosol 571 is a cationic surfactant consisting of lauryl trimethyl ammonium chloride in a solution of water and isopropyl alcohol. It is recommended as an emulsifier in cationic or blended ionic emulsion systems. Its use in latex compounds as a "sensitiz...展开 Octosol 571 is a cationic surfactant consisting of lauryl trimethyl ammonium chloride in a solution of water and isopropyl alcohol. It is recommended as an emulsifier in cationic or blended ionic emulsion systems. Its use in latex compounds as a "sensitizer" is due to the fact that quaternary ammonium surfactants are not compatible with the anionic latex stabilizers. Some latex foams must be gelled before curing in order to mold or emboss while wet, or to prevent loss of gauge due to cell collapse during the cure interval. 收起 | |
| Octosol 687 | Tiarco Chemical | Octosol 687 is a fatty acid soap prepared from ricinoleic acid reacted with a minimum excess of potassium hydroxide (KOH, potash). Potassium ricinoleate plays an important role in latex compounds by contributing to the mechanical and chemical stability. O...展开 Octosol 687 is a fatty acid soap prepared from ricinoleic acid reacted with a minimum excess of potassium hydroxide (KOH, potash). Potassium ricinoleate plays an important role in latex compounds by contributing to the mechanical and chemical stability. Octosol 687 is suggested for use as a primary frothing aid in gelled latex foam compounds. It is may also be used as a dispersant for fillers, dry chemicals, and pigments. 收起 | |
| Octosol 730 | Tiarco Chemical | Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce q...展开 Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce quality-frothed adhesives and latex foams. 收起 | |
| Octosol 731 | Tiarco Chemical | Octosol 731 is an anionic, light yellow liquid solution of sodium salt of a carboxylated polyelectrolyte. It serves as an excellent dispersing aid in wide variety of formulations - including carpet back-coatings, dyes, pigments, and clays, as well as with...展开 Octosol 731 is an anionic, light yellow liquid solution of sodium salt of a carboxylated polyelectrolyte. It serves as an excellent dispersing aid in wide variety of formulations - including carpet back-coatings, dyes, pigments, and clays, as well as with inorganic compounds. 收起 | |
| Octosol 828 | Tiarco Chemical | Octosol 828 is a 12-mole sodium lauryl ether sulfate used in emulsion polymerization. It is generally used with high molecular weight polymers, as well as in high acid systems as an emulsifier. This product minimizes the potential for coagulation and is f...展开 Octosol 828 is a 12-mole sodium lauryl ether sulfate used in emulsion polymerization. It is generally used with high molecular weight polymers, as well as in high acid systems as an emulsifier. This product minimizes the potential for coagulation and is formaldehyde free. 收起 | |
| Octosol 853 | Tiarco Chemical | Octosol 853 is an anionic surfactant, in the form of a dark reddish-brown aqueous solution of sulfated fatty acids. It aids in the mechanical and chemical stability of both natural and synthetic latices during compounding, storage, and application. This p...展开 Octosol 853 is an anionic surfactant, in the form of a dark reddish-brown aqueous solution of sulfated fatty acids. It aids in the mechanical and chemical stability of both natural and synthetic latices during compounding, storage, and application. This product is formulated to prevent premature coagulation of the latex under such conditions as high-speed agitation, acidification, or pigmentation. Octosol 853 may also be used for gelation-control. Used as a dipping aid, it ensures uniform film deposits and good penetration. 收起 | |
| Octosol A-18 | Tiarco Chemical | Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, a...展开 Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, and foaming. It is used as a textile-softening agent, as a suspending agent in emulsion polymerization, as a foaming agent in latex compounds, and in cleaning and penetrating formulations. 收起 | |
| Octosol A-18A | Tiarco Chemical | Octosol A-18A is a dispersion of diammonium-n-octadecylsulfosuccinamate in the form of a clear amber to creamy white liquid or paste, depending on storage temperature. It is considered an ideal foaming agent for use in acrylic latex frothed compounds. Bei...展开 Octosol A-18A is a dispersion of diammonium-n-octadecylsulfosuccinamate in the form of a clear amber to creamy white liquid or paste, depending on storage temperature. It is considered an ideal foaming agent for use in acrylic latex frothed compounds. Being an ammonium neutralized surfactant, Octosol A-18A allows for reduced sodium ion content in formulations where such fixed alkali ions are believed to retard the cross-linking cure systems. 收起 | |
| Octosol ALS | Tiarco Chemical | Octosol ALS is an aqueous solution of a ammonium lauryl sulfate, in the form of a pale clear liquid which readily mixes in water. It is an excellent stabilizer, emulsifier, and dispersant for many industrial aqueous systems. | |
| Octosol SLS | Tiarco Chemical | Octosol SLS is a clear aqueous solution of sodium lauryl sulfate, characterized by light color, low odor, a low cloud point, and low salt content. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a ...展开 Octosol SLS is a clear aqueous solution of sodium lauryl sulfate, characterized by light color, low odor, a low cloud point, and low salt content. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and dispersing agent. Octosol SLS is recommended for use as a biodegradable wetting agent, detergent, and emulsion stabilizer. 收起 | |
| Octosol SLS-30K | Tiarco Chemical | Octosol SLS-30K is a clear, water white to pale yellow, aqueous solution of sodium lauryl sulfate preserved with Kathon CG™. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and d...展开 Octosol SLS-30K is a clear, water white to pale yellow, aqueous solution of sodium lauryl sulfate preserved with Kathon CG™. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and dispersing agent. Octosol SLS-30K is recommended for use as a biodegradable wetting agent, detergent, and emulsion stabilizer. 收起 | |
| Octosperse 425 | Tiarco Chemical | Octosperse 425 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concent...展开 Octosperse 425 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concentration suitable for use in a specific formulation. It is suggested that lab testing information be used for acceptable performance levels. 收起 | |
| Octosperse 428 | Tiarco Chemical | Octosperse 428 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concent...展开 Octosperse 428 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concentration suitable for use in a specific formulation. 收起 | |
| Octosperse TS-10 | Tiarco Chemical | Octosperse TS-10 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the f...展开 Octosperse TS-10 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the foaming system. The eventual concentration can be established which is the most economical and efficient for a given system. 收起 | |
| Octosperse TS-30 | Tiarco Chemical | Octosperse TS-30 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the f...展开 Octosperse TS-30 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the foaming system. For starting, it is suggested that in dye becks and wash operations that 1/2 ounce of the defoamer be used per 100 gallons of the process volume. The concentration can then be adjusted to establish the most economical and efficient concentration. 收起 | |
| Octotint 120 | Tiarco Chemical | Octotint 120 is an aqueous dispersion of ultramarine blue, an inorganic pigment having good alkali and heat resistance. This bright hue is opaque in water-based systems and not recommended for acidic systems. Octotint 120 blue is recommended for use in th...展开 Octotint 120 is an aqueous dispersion of ultramarine blue, an inorganic pigment having good alkali and heat resistance. This bright hue is opaque in water-based systems and not recommended for acidic systems. Octotint 120 blue is recommended for use in the rubber latex industry as a bluing agent, applied in very low percentages to intensify whiteness by offsetting yellowish undertones. 收起 | |
| Octotint 435 | Tiarco Chemical | Octotint 435 is an aqueous dispersion of highly refined chroma blue pigments of extremely fine particle size and purity. It can be used with good compatibility in aqueous formulations where its characteristic color is desired. Octotint 435 has pleasing an...展开 Octotint 435 is an aqueous dispersion of highly refined chroma blue pigments of extremely fine particle size and purity. It can be used with good compatibility in aqueous formulations where its characteristic color is desired. Octotint 435 has pleasing and useful color characteristics both in masstone and tint. Its pigment sources display high tinting strength and hiding power. Because it is water-based, dispersibility into a latex system is greatly enhanced while demonstrating excellent handling properties. 收起 | |
| Octotint 725 | Tiarco Chemical | Octotint 725 is a finely divided aqueous dispersion of rutile titanium dioxide pigment, at 60% activity. Titanium dioxide has the greatest hiding power, or opacifying power, of all pigments. It is also inert and noncombustible. Octotint 725 is formulated ...展开 Octotint 725 is a finely divided aqueous dispersion of rutile titanium dioxide pigment, at 60% activity. Titanium dioxide has the greatest hiding power, or opacifying power, of all pigments. It is also inert and noncombustible. Octotint 725 is formulated for direct addition into most latex-based compounds, thus providing the compounder with a ready-to-use, pourable form of TiO2 with improved dispersion properties. 收起 | |
| Octotint 790 | Tiarco Chemical | Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aq...展开 Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aqueous formulations where its characteristic color would be desired. 收起 | |
| Octowax 1500 | Tiarco Chemical | Octowax 1500 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining a...展开 Octowax 1500 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining antioxidants. The wax "blooms" during the cure process from the emulsion to the rubber surface, providing a barrier against ozone attack. Octowax 1500 is designed to be added directly to latex compounds. 收起 | |
| Octowax 17 | Tiarco Chemical | Octowax 17 is a homogenized emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-s...展开 Octowax 17 is a homogenized emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining antioxidants. The wax "blooms" during the cure process from the emulsion to the rubber surface, providing a barrier against ozone attack. Octowax 17 is designed to be added directly to latex compounds. 收起 | |
| Octowax 321 | Tiarco Chemical | Octowax 321 is a paraffin wax emulsion that is typically very stable to shear and heat-stable during drying. Suggested uses include physical modification of cured latex compounds, water resistance improvement, and improved aging characteristics brought ab...展开 Octowax 321 is a paraffin wax emulsion that is typically very stable to shear and heat-stable during drying. Suggested uses include physical modification of cured latex compounds, water resistance improvement, and improved aging characteristics brought about by the addition of this type of wax emulsion to latex. Octowax 321 is designed to be added directly to latex compounds. 收起 | |
| Octowax 5 | Tiarco Chemical | Octowax 5 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining anti...展开 Octowax 5 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining antioxidants. The wax "blooms" during the cure process from the emulsion to the rubber surface, providing a barrier against ozone attack. Octowax 5 is designed to be added directly to latex compounds. 收起 | |
| Octowax MR-40 | Tiarco Chemical | Octowax MR-40 is a light amber-cream colored emulsion of an oxidized, modified hydrocarbon wax. The emulsion is based primarily on a nonionic surfactant, but is a mixture with anionic because of the amine-neutralized reactive components of the wax. Octowa...展开 Octowax MR-40 is a light amber-cream colored emulsion of an oxidized, modified hydrocarbon wax. The emulsion is based primarily on a nonionic surfactant, but is a mixture with anionic because of the amine-neutralized reactive components of the wax. Octowax MR-40 is suggested for use as a mold-release and lubricant. 收起 | |
| Octowet 70 | Tiarco Chemical | Octowet 70 is an anionic surfactant (70% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 70 is an anionic surfactant (70% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 | |
| Octowet 70D | Tiarco Chemical | Octowet 70D is an anionic surfactant solution (DOSS) in water, and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely use...展开 Octowet 70D is an anionic surfactant solution (DOSS) in water, and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 | |
| Octowet 70MS | Tiarco Chemical | Octowet 70MS is an anionic surfactant, 70% DOSS in mineral spirits. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 70MS is an anionic surfactant, 70% DOSS in mineral spirits. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 |
