| Acetone | TOP Solvent Company Limited | Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent p...展开 Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent properties for vegetable and animal fats, cellulose, natural and synthetic resins and many other organic substances. The primary use for this product is in printing inks, adhesives, paints and coatings. 收起 | |
| Aliphatic 6/15 | Braskem S.A. | Aliphatic 6/15 is an aliphatic solvent. | |
| Butyl Glycol Ether (BGE) | TOP Solvent Company Limited | Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenate...展开 Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenated solvents, as well as with aliphatic and aromatic hydrocarbons and oils. It is solvent for many natural and synthetic resins, nitrocellulose and ethyl cellulose. Butyl Glycol Either (BGE) is primarily used as a solvent in printing inks, paints and coatings. 收起 | |
| Calfax® 10L-45 | Pilot Chemical | Calfax® 10L-45 is a light amber, water soluble surface active agent that contains no halogenated solvents. It is an aqueous surfactant solution that is compatible with a broad range of high electrolyte solutions such as brine, bleach, caustic and inorgani...展开 Calfax® 10L-45 is a light amber, water soluble surface active agent that contains no halogenated solvents. It is an aqueous surfactant solution that is compatible with a broad range of high electrolyte solutions such as brine, bleach, caustic and inorganic acids. The high surface activity and the high electrolyte tolerance of Calfax® 10L-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification system under conditions that would not be usable with conventional surface active agents, permitting greater control over latex molecular weight and particle size. 收起 | |
| Calfax® 10LA-75 | Pilot Chemical | Calfax® 10LA-75 is a amber, viscous soluble surface active agent that contains no halogenated solvents. Calfax® 10LA-75 is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side cha...展开 Calfax® 10LA-75 is a amber, viscous soluble surface active agent that contains no halogenated solvents. Calfax® 10LA-75 is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 10LA-75 promotes emulsification and solubility in organic solvents. It is recommended that Calfax® 10LA-75 be added to water, if a dilution is needed, as high viscosity occurs when water is added to the Calfax® 10LA-75. The high electrolyte tolerance and surface activity of Calfax® 10LA-75 make it the surfactant of choice for making latex emulsions for adhesives and foam rubber. 收起 | |
| Calfax® 16L-35 | Pilot Chemical | Calfax® 16L-35 is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate, which has a clear light amber appearance and contains no halogenated solvents. Calfax® 16L-35 offers superior solubility and stability in electrolyte solutions such as b...展开 Calfax® 16L-35 is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate, which has a clear light amber appearance and contains no halogenated solvents. Calfax® 16L-35 offers superior solubility and stability in electrolyte solutions such as brine, bleach, caustic and inorganic acids. The long, linear side chain promotes lower critical micelle concentration (CMC), higher surface tension and lower foam stability than the other Calfax® products. Calfax® 16L-35 offers substantially less foam than shorter chain disulfonates. It is an efficient emulsifier for ABS resins and styrene-butadiene latex, among others. 收起 | |
| Calfax® 6LA-70 | Pilot Chemical | Calfax® 6LA-70 is a clear amber liquid surface active agent that contains no halogenated solvents. It is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 6LA-...展开 Calfax® 6LA-70 is a clear amber liquid surface active agent that contains no halogenated solvents. It is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 6LA-70 promotes emulsification and solubility in organic solvents. This product is effective as a solubilizer, coupler and hydrotrope for use in acid and alkaline cleaners where conventional surfactants don't have enough solubility. It also finds application in glass cleaners, concentrated laundry detergents, kitchen and bath cleaners, pot and pan, hard surface cleaners and concrete cleaners. 收起 | |
| Calfax® DB-45 | Pilot Chemical | Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sod...展开 Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sodium carbonate and sodium metasilicate. The high surface activity and the high electrolyte tolerance of Calfax® DB-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification process under conditions that would not be usable with conventional surface active agents, permitting greater control over latex’s molecular weight and particle size. Calfax® DB-45 also aids in improving a latex emulsion’s thermal and mechanical stability. 收起 | |
| Cyclohexane | Braskem S.A. | Cyclohexane is a cyclic aliphatic hydrocarbon solvent. | |
| Dicyclopentadiene | Braskem S.A. | Dicyclopentadiene is a colorless hydrocarbon liquid. | |
| ECOPOL LB-64 | Ecopol Tech | ECOPOL LB-64 is a monocomponent hybrid organic-inorganic fluorinated polyurethane dispersed in butyl acetate solvent, which undergoes cross-linking in the presence of moisture and drying. This product stands out for its resistance to abrasion, ink repelle...展开 ECOPOL LB-64 is a monocomponent hybrid organic-inorganic fluorinated polyurethane dispersed in butyl acetate solvent, which undergoes cross-linking in the presence of moisture and drying. This product stands out for its resistance to abrasion, ink repellence, cigarette burns, and stains like coffee, while also exhibiting resistance to steam, high temperatures, and stability against UV radiation. It serves as an excellent hydrophobic and oleophobic coating and it has a high adhesion to inorganic surfaces. ECOPOL LB-64 is particularly recommended as a final coating for materials highly exposed to corrosion or erosion, such as aluminum (and other metals), high-pressure laminates (HPL), wood, and glass, among others. 收起 | |
| ECOPOLBUILD 1 | Ecopol Tech | ECOPOLBUILD 1 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits wate...展开 ECOPOLBUILD 1 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits water repellent properties, thus providing good moisture resistance. It also imparts high abrasion and alkali resistance. This product contains approximately 85% biobased products. 收起 | |
| ECOPOLBUILD 16 | Ecopol Tech | ECOPOLBUILD 16 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polycarbonate-polyurethane, specially designed for protective coatings in the construction and wood industry with excellent hydrolysis and solvent stability. Once app...展开 ECOPOLBUILD 16 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polycarbonate-polyurethane, specially designed for protective coatings in the construction and wood industry with excellent hydrolysis and solvent stability. Once applied and cured, the product exhibits water-repellent properties, providing good moisture resistance. Additionally, it imparts excellent abrasion and alkali resistance. This product contains more than 70% biobased products. 收起 | |
| ECOPOLBUILD 3 | Ecopol Tech | ECOPOLBUILD 3 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits wate...展开 ECOPOLBUILD 3 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits water repellent properties, thus providing good moisture resistance. It also imparts high abrasion resistance. This product contains approximately 85% biobased products. 收起 | |
| ECOPOLCOAT CCR 052-F | Ecopol Tech | ECOPOLCOAT CCR 052-F is an aqueous cationic dispersion of cross-linked organic-inorganic hybrid polyurethane, designed for textile coating with high hydrolytic stability. Once cured, it exhibits water-repellent properties and good moisture resistance, wit...展开 ECOPOLCOAT CCR 052-F is an aqueous cationic dispersion of cross-linked organic-inorganic hybrid polyurethane, designed for textile coating with high hydrolytic stability. Once cured, it exhibits water-repellent properties and good moisture resistance, with approximately 85% biobased content. Tailored for stamping processes, it demonstrates thermal resistance, hardness, low friction and durability. This versatile polymer also provides antiadhesive properties, preventing unwanted material adhesion during stamping. 收起 | |
| ECOPOLCOAT CCR 30-F | Ecopol Tech | ECOPOLCOAT CCR 30-F is an aqueous anionic dispersion of cross-linked organic-inorganic hybrid polyurethane, designed for textile coating with high hydrolytic stability. Once cured, it exhibits water-repellent properties and good moisture resistance, with ...展开 ECOPOLCOAT CCR 30-F is an aqueous anionic dispersion of cross-linked organic-inorganic hybrid polyurethane, designed for textile coating with high hydrolytic stability. Once cured, it exhibits water-repellent properties and good moisture resistance, with approximately 85% biobased content. Tailored for stamping processes, it demonstrates thermal resistance, hardness, low friction, and durability. This versatile polymer also provides antiadhesive properties, preventing unwanted material adhesion during stamping. 收起 | |
| ECOPOLCOAT CSS 052 | Ecopol Tech | ECOPOLCOAT CSS 052 is a unique product in the field of textile coatings as it represents a cationic aqueous organic-inorganic hybrid polyurethane dispersion developed to serve as a top coating. It exhibits superb superhydrophobic characteristics, impartin...展开 ECOPOLCOAT CSS 052 is a unique product in the field of textile coatings as it represents a cationic aqueous organic-inorganic hybrid polyurethane dispersion developed to serve as a top coating. It exhibits superb superhydrophobic characteristics, imparting high water repellency to coated materials. ECOPOLCOAT CSS 052 is environmentally friendly as it is water-based, fluorine-free, and made from 84% natural resources. The dispersion imparts a silky feel to textiles. It is suitable for all types of fabrics, enhancing their performance by improving abrasion resistance. In essence, ECOPOLCOAT CSS 052 emerges as a versatile, high-performance coating solution, combining functionality, aesthetics and ecological principles. 收起 | |
| ECOPOLCOAT FF 052 | Ecopol Tech | ECOPOLCOAT FF 052 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane. Once cured, it has a high resistance to abrasion, water, oil, and dirt. It also shows good resistance to weathering (rain, sun, dirt, particles, etc....展开 ECOPOLCOAT FF 052 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane. Once cured, it has a high resistance to abrasion, water, oil, and dirt. It also shows good resistance to weathering (rain, sun, dirt, particles, etc.). It contains CF2 chains in the polyurethane backbone. This CF2 is biodegradable. 收起 | |
| ECOPOLCOAT FF 30 | Ecopol Tech | ECOPOLCOAT FF 052 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane. Once cured, it has a high resistance to abrasion, water, alkali, oil, and dirt. It also shows good resistance to weathering (rain, sun, dirt, particl...展开 ECOPOLCOAT FF 052 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane. Once cured, it has a high resistance to abrasion, water, alkali, oil, and dirt. It also shows good resistance to weathering (rain, sun, dirt, particles, etc.). It contains CF2 chains in the polyurethane backbone. This CF2 is biodegradable. 收起 | |
| ECOPOLCOAT PC 30 | Ecopol Tech | ECOPOLCOAT PC 30 is an anionic aqueous dispersion of bio-based polycarbonate-polyurethane with a solid content of 35%. This coating has a combination of outstanding properties including water resistance, excellent abrasion resistance, and hydrolysis resis...展开 ECOPOLCOAT PC 30 is an anionic aqueous dispersion of bio-based polycarbonate-polyurethane with a solid content of 35%. This coating has a combination of outstanding properties including water resistance, excellent abrasion resistance, and hydrolysis resistance. Designed for applications in the manufacture of technical and functional textiles, such as sportswear, tents, rainwear, and other products where increased durability and performance are demanded. 收起 | |
| ECOPOLEDER-BASE | Ecopol Tech | ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40%. Specifically designed for impregnation applications it provides adhesive strength, which creates a robust and durable bond to the leather substrate. ECOP...展开 ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40%. Specifically designed for impregnation applications it provides adhesive strength, which creates a robust and durable bond to the leather substrate. ECOPOLEDER-BASE imparts an excellent elasticity to the material, significantly improving its flexibility. This translates into a superior handling experience, making it the ideal choice for applications that demand both strength and ease of handling. ECOPOLEDER-BASE represents a solution, which incorporates a synthesis of advanced polyurethane-polyester technology to offer increased performance and versatility in leather impregnation processes. 收起 | |
| ECOPOLEDER-BT | Ecopol Tech | ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and ...展开 ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and finishing applications, this dispersion significantly increases the abrasion resistance, conferring durability to the material. It has a high hardness, providing solid protection against wear. ECOPOLEDER-BT has specific binding properties with leather, ensuring strong and durable adhesion. In addition, the dispersion offers alkali resistance, extending its suitability for various conditions. With inherent waterproof properties, it further enhances the durability and utility of leather in various environments. In addition, ECOPOLEDER-BT is environmentally friendly, as more than 40% of its dry composition comes from organic sources. 收起 | |
| ECOPOLEDER-D-BASE | Ecopol Tech | ECOPOLEDER-D-BASE is an anionic aqueous polyurethane-polyester dispersion, which stands out for its significant solids content of 50%. Designed with a focus on durability and performance, this dispersion features high hydrolysis resistance, ensuring longe...展开 ECOPOLEDER-D-BASE is an anionic aqueous polyurethane-polyester dispersion, which stands out for its significant solids content of 50%. Designed with a focus on durability and performance, this dispersion features high hydrolysis resistance, ensuring longevity in applications. Adapted to leather impregnation processes, ECOPOLEDER-D-BASE offers exceptional elasticity, contributing to the flexibility and strength of the material. In particular, ECOPOLEDER-D-BASE exhibits exceptional adhesive strength, creating solid bonds with the leather substrate. This dispersion features advanced polymer technology, offering a high solids solution that elevates leather properties in durability, flexibility and handling. 收起 | |
| ECOPOLEDER-PC-TOP | Ecopol Tech | ECOPOLEDER-PC-TOP is an anionic aqueous polycarbonate-polyurethane dispersion of bio-based origin with a solids content of 35%. This coating serves to enhance the strength and durability of leather, providing an additional layer that acts as a protective ...展开 ECOPOLEDER-PC-TOP is an anionic aqueous polycarbonate-polyurethane dispersion of bio-based origin with a solids content of 35%. This coating serves to enhance the strength and durability of leather, providing an additional layer that acts as a protective barrier against scratches, stains and general wear and tear. Its application finds diverse uses, most notably in the manufacture of handbags, belts, footwear and other leather products. 收起 | |
| ECOPOLEDER-S-BASE | Ecopol Tech | ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40% adding groups with specific adhesion to leather. It is designed for impregnation applications, providing increased adhesive strength that creates a strong...展开 ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40% adding groups with specific adhesion to leather. It is designed for impregnation applications, providing increased adhesive strength that creates a strong, robust, and more durable bond to the leather substrate. ECOPOLEDER-BASE imparts good elasticity to the material, significantly improving its flexibility. This translates into a superior handling experience, making it the ideal choice for applications that demand strength and ease of handling. ECOPOLEDER-BASE represents a solution that incorporates a synthesis of advanced polyurethane-polyester technology to offer increased performance and versatility in leather impregnation processes. 收起 | |
| ECOPOLEDER-S-TOP | Ecopol Tech | ECOPOLEDER-S-TOP is a cationic aqueous polyurethane-silicone copolymer dispersion with a solids content of 30%. Its crosslinking mechanism is initiated during the drying process, which significantly increases its performance attributes. Designed primarily...展开 ECOPOLEDER-S-TOP is a cationic aqueous polyurethane-silicone copolymer dispersion with a solids content of 30%. Its crosslinking mechanism is initiated during the drying process, which significantly increases its performance attributes. Designed primarily for leather finishing applications, this dispersion substantially increases abrasion resistance, contributing to improved material durability. The high hardness of the formulation ensures solid wear protection, complemented by specific binding properties that establish a strong and durable adhesion to the leather. ECOPOLEDER-S-TOP goes beyond conventional functionalities by introducing a silky feel to the leather surface. In addition, it exhibits superhydrophobic properties, reinforcing the leather's resistance in various environmental conditions. In addition, more than 40% of its dry composition comes from bio-based materials. ECOPOLEDER-S-TOP is a sophisticated solution that combines the advantages of polyurethane polymers with silicone in the backbone to improve the performance and feel of leather products. 收起 | |
| ECOPOLEDER-TOP | Ecopol Tech | ECOPOLEDER-TOP constitutes an aqueous cationic polyurethane dispersion characterized by a 30% solids content. Significantly, its cross-linking mechanism is activated during the drying phase, culminating in an enhancement of its inherent properties. Tailor...展开 ECOPOLEDER-TOP constitutes an aqueous cationic polyurethane dispersion characterized by a 30% solids content. Significantly, its cross-linking mechanism is activated during the drying phase, culminating in an enhancement of its inherent properties. Tailored for leather finishing applications, this dispersion markedly augments abrasion resistance, thereby conferring a notable degree of durability to the material. The elevated hardness of ECOPOLEDER-TOP ensures robust protection against wear and tear, complemented by specific binding properties that guarantee a resilient and enduring adhesion to the leather substrate. With intrinsic waterproof attributes, it further fortifies the leather's durability and adaptability across diverse environmental conditions. In addition to its functional attributes, ECOPOLEDER-TOP aligns seamlessly with environmental considerations, as more than 40% of its dry composition is derived from organic sources. This renders it a judicious and sustainable choice, harmonizing ecological consciousness with unwavering performance standards. 收起 | |
| ECOPOLEDER-TRANS | Ecopol Tech | ECOPOLEDER-TRANS is an anionic aqueous polyurethane-polyester dispersion, which is distinguished by an impressive 60% solids content with a low viscosity. This dispersion is designed to provide a protective coating and improve various leather properties. ...展开 ECOPOLEDER-TRANS is an anionic aqueous polyurethane-polyester dispersion, which is distinguished by an impressive 60% solids content with a low viscosity. This dispersion is designed to provide a protective coating and improve various leather properties. The high solids content of ECOPOLEDER-TRANS allows for a reduced application rate in transfer processes, optimising coating efficiency. ECOPOLEDER-TRANS provides increased wear resistance, flexibility and durability. 收起 | |
| ECOPOLFIX | Ecopol Tech | ECOPOLFIX is an aqueous anionic dispersion of an acrylic copolymer. It is suitable for application on roads, unpaved paths, parking lots and others. Fixer and stabilizer for ground applications. Main characteristics include good fixation of soil and good ...展开 ECOPOLFIX is an aqueous anionic dispersion of an acrylic copolymer. It is suitable for application on roads, unpaved paths, parking lots and others. Fixer and stabilizer for ground applications. Main characteristics include good fixation of soil and good elasticity, low water absorption and steam proof, dust repellent, abrasion resistant and soil stabilizer. 收起 | |
| ECOPOLSEC | Ecopol Tech | ECOPOLSEC is a white powder of amorphous precipitated silica with a homogeneous particle size and high absorption capacity. It stands out for its absorption capacity without gel formation. It is specifically used in the sludge drying process. | |
| ECOPOLTEXT-40 V | Ecopol Tech | ECOPOLTEXT-40是阴离子脂肪族聚酯 - 聚氨酯分散体，专门设计用于纺织品涂料配方。 | |
| ECOPOLTEXT-60 | Ecopol Tech | ECOPOLTEXT-60 is an anionic aliphatic polyester-polyurethane dispersion with a high solids content, specially designed for use in base coat textile coating formulations. It is suitable for various textile coating processes in the fields of sports, apparel...展开 ECOPOLTEXT-60 is an anionic aliphatic polyester-polyurethane dispersion with a high solids content, specially designed for use in base coat textile coating formulations. It is suitable for various textile coating processes in the fields of sports, apparel, fashion, technical textiles, and outerwear as it improves the mechanical properties of the fabric, making it stronger and more durable. This high solids product has advantages such as increased resistance to wear, abrasion, and weathering. 收起 | |
| ECOPOLTEXT-D | Ecopol Tech | ECOPOLTEXT-D is an anionic high-molecular weight water-based polyurethane dispersion with high elasticity, high elongation at break, and very good hydrolysis resistance. The dispersion is very stable due to its low particle size distribution with a high c...展开 ECOPOLTEXT-D is an anionic high-molecular weight water-based polyurethane dispersion with high elasticity, high elongation at break, and very good hydrolysis resistance. The dispersion is very stable due to its low particle size distribution with a high concentration of polymer, and very low viscosity. This gives a very good performance for digital printing. The product is free of NMP, NEP, and VOCs and organo-TIN free. Due to its unique polymeric structure, ECOPOLTEXT-D is particularly suitable for applications involving different substrates. As with any product, ECOPOLTEXT-D should be tested or formulated for a specific use before an extensive application. Resin dispersions, emulsifiers, and thickening agents, among others, can be added. 收起 | |
| ECOPOLTEXT-S40 V | Ecopol Tech | ECOPOLTEXT-S40 V is an anionic aliphatic polyester-polyurethane dispersion with specific cross-linking in textile drying processes. This product is suitable in areas such as sports, technical articles, and general protective equipment, as it has fabric-re...展开 ECOPOLTEXT-S40 V is an anionic aliphatic polyester-polyurethane dispersion with specific cross-linking in textile drying processes. This product is suitable in areas such as sports, technical articles, and general protective equipment, as it has fabric-reactive groups that provide better adhesion. 收起 | |
| ECOPUD EW-10 | Ecopol Tech | ECOPUD EW-10 is an anionic polyurethane in aqueous dispersion. It can be directly applied to porous materials (wood, paper) using various techniques (brush, roller, spray) without prior drying, with absorption tests recommended. It can also be applied to ...展开 ECOPUD EW-10 is an anionic polyurethane in aqueous dispersion. It can be directly applied to porous materials (wood, paper) using various techniques (brush, roller, spray) without prior drying, with absorption tests recommended. It can also be applied to previously dry surfaces. ECOPUD EW-10 is used in industries such as wood, graphic arts, lamination, footwear, textiles, paper, automotive, and construction. 收起 | |
| ECOPUD-42-45 | Ecopol Tech | ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formula...展开 ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formulation of adhesives for furniture, automotive, footwear, textiles, leather, cork, and the construction industry. ECOPUD 42-45 is particularly well-suited for wet bonding of textile substrates due to the softness of the polymer film and its resistance to high temperatures. The product is free of NMP, NEP, and VOC’s and organo-TIN free. 收起 | |
| ECOPUD-54 | Ecopol Tech | ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction ...展开 ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction industry. Due to its polymeric structure, ECOPUD-54 is particularly well-suited for applications involving plasticized PVC substrates. 收起 | |
| Ethyl Acetate (EA) | TOP Solvent Company Limited | Ethyl acetate (EA) is a neutral colorless liquid with a pleasantly fruity odor. Ethyl acetate is primarily used in the production of nitrocellulose and cellulose acetate lacquers and as a solvent in adhesives and coatings. | |
| Ezolem 6/13 | Braskem S.A. | Ezolem 6/13 is a solvent for rubber. | |
| Ezolem 6/17 | Braskem S.A. | Ezolem 6/17 is an aliphatic hydrocarbon solvent. | |
| Ezolem 6/7 | Braskem S.A. | Ezolem 6/7 is an aliphatic solvent. | |
| Ezolem 7/9 | Braskem S.A. | Ezolem 7/9 is a light aliphatic solvent. | |
| HS-100 | Braskem S.A. | HS-100 is an aromatic hydrocarbon solvent. | |
| Isopropanol (IPA) | TOP Solvent Company Limited | Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropi...展开 Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropic mixtures with water and many organic liquids. It is used in printing inks, adhesives, paints and coatings. 收起 | |
| Masurf® UV-350 | Pilot Chemical | Masurf® UV-350 is an Ultraviolet Light Absorber for non-polar, hydrocarbon solvent systems, designed to impart UV protection to fabrics and hard surfaces. Utilizing proven and accepted benzotriazole UV absorber chemistry, this product is easy to use and h...展开 Masurf® UV-350 is an Ultraviolet Light Absorber for non-polar, hydrocarbon solvent systems, designed to impart UV protection to fabrics and hard surfaces. Utilizing proven and accepted benzotriazole UV absorber chemistry, this product is easy to use and highly efficient, because it is applied from a solution. Masurf® UV-350 is readily dissolvable in hydrocarbon solvents which provides a uniform coverage compared to other UV absorbers that form unstable, large particle size dispersions and yield non-uniform surface coverage. Unlike aqueous based UV absorbers, this product is not water soluble, so it will not readily wash off exterior surfaces. 收起 | |
| Methanol | TOP Solvent Company Limited | Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is...展开 Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is in printing inks, paints and coatings as solvents, thinners, denaturant for ethanol and producing biodiesel. 收起 | |
| Methyl Ethyl Ketone (MEK) | TOP Solvent Company Limited | Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces sol...展开 Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces solutions with low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起 | |
| Methyl Isobutyl Ketone (MIBK) | TOP Solvent Company Limited | Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic...展开 Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic resins and can produce solutions of low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起 | |
| Methylene Chloride | TOP Solvent Company Limited | Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with...展开 Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with water. It has solvent properties with most organic chemicals and materials. This product is primarily used as a solvent in paints and coatings. 收起 | |
| Mixed Xylene | Braskem S.A. | Mixed Xylene is an aromatic hydrocarbon solvent. | |
| N-Butyl Acetate (BA) | TOP Solvent Company Limited | N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is prim...展开 N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is primarily used as a solvent in printing inks, adhesives, paints and coatings. 收起 | |
| Noneno | Braskem S.A. | Noneno is a clear hydrocarbon liquid. | |
| PIB 10 | Braskem S.A. | PIB 10 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 10 is a non-toxic polymer. | |
| PIB 122 | Braskem S.A. | PIB 122 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 122 is a non-toxic polymer. | |
| PIB 128 | Braskem S.A. | PIB 128 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 128 is a non-toxic polymer. | |
| PIB 16 | Braskem S.A. | PIB 16 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. | |
| PIB 24 | Braskem S.A. | PIB 24 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 24 is a non-toxic polymer. | |
| PIB 240 | Braskem S.A. | PIB 240 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 240 is a non-toxic polymer. | |
| PIB 30 | Braskem S.A. | PIB 30 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 30 is a non-toxic polymer. | |
| PIB 32 | Braskem S.A. | PIB 32 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 32 is a non-toxic polymer. | |
| PIB 4 | Braskem S.A. | PIB 4 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 4 is a non-toxic polymer. | |
| PIB 6 | Braskem S.A. | PIB 6 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 6 is a non-toxic polymer. | |
| PIB 8 | Braskem S.A. | PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer. | |
| Pluract 10+ | Braskem S.A. | Pluract 10+ is an aromatic hydrocarbon solvent. | |
| Pluract 12+ | Braskem S.A. | Pluract 12+ is a hydrocarbon solvent. | |
| Pluract 9 | Braskem S.A. | Pluract 9 is an aromatic hydrocarbon solvent. | |
| S-Butyl Acetate (SBA) | TOP Solvent Company Limited | S-Butyl acetate (SBA) is a transparent volatile liquid with a distinguishing ester odor. It is miscible in various solvents such as alcohols, ketones, glycol ethers, aromatic hydrocarbons and aliphatic hydrocarbons. It is primarily used in the producing a...展开 S-Butyl acetate (SBA) is a transparent volatile liquid with a distinguishing ester odor. It is miscible in various solvents such as alcohols, ketones, glycol ethers, aromatic hydrocarbons and aliphatic hydrocarbons. It is primarily used in the producing and the processing of paints, coatings, printing inks, adhesives.. 收起 | |
| Sensitis 13/15 | Braskem S.A. | Sensitis 13/15 is a hydrocarbon solvent. | |
| Sensitis 17/21 | Braskem S.A. | Sensitis 17/21 is a hydrocarbon solvent. | |
| Sensitis 22/25 | Braskem S.A. | Sensitis 22/25 is a hydrocarbon solvent. | |
| Tetrâmero | Braskem S.A. | Tetrâmero is used in the formulation of industrial detergents and additives for lubricating oils. | |
| Toluene | Braskem S.A. | Toluene is an aromatic hydrocarbon solvent. | |
| Toluene | TOP Solvent Company Limited | Toluene is a clear fast evaporating, highly refined aromatic solvent on a technical grade. This product meets many specifications such as that of Nitration grade Toluene (ASTM D841). The boiling range of this flexible solvent is not broader than 1.0°C. I...展开 Toluene is a clear fast evaporating, highly refined aromatic solvent on a technical grade. This product meets many specifications such as that of Nitration grade Toluene (ASTM D841). The boiling range of this flexible solvent is not broader than 1.0°C. In some areas this solvent is hard to come by. The primary use of this product is in printing inks, adhesives, paints and coatings. 收起 | |
| TOPSol 60/145 | TOP Solvent Company Limited | TOPSol 60/145 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is widely used in the rubber and related industry. It is solvent with naphtha (petroleum) and light aliphatic and is built up of n-Hexane and Toluene...展开 TOPSol 60/145 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is widely used in the rubber and related industry. It is solvent with naphtha (petroleum) and light aliphatic and is built up of n-Hexane and Toluene making it a highly flammable liquid. TOPSol 60/145 is primarily used as a solvent in adhesives and sealants. 收起 | |
| TOPSol A100 | TOP Solvent Company Limited | TOPSol A100 Solvent is a clear transparent liquid with an aromatic odor. It has a wide boiling range and is a mixture of predominantly C9 hydrocarbons with 98% aromatic. It has good solvent properties and is low in sulfur content. This product is primaril...展开 TOPSol A100 Solvent is a clear transparent liquid with an aromatic odor. It has a wide boiling range and is a mixture of predominantly C9 hydrocarbons with 98% aromatic. It has good solvent properties and is low in sulfur content. This product is primarily used as a solvent in paints and coatings. 收起 | |
| TOPSol A150 | TOP Solvent Company Limited | TOPSol A150 Solvent is a clear transparent liquid with an aromatic odor. It has a high boiling point and is a mixture of predominantly C9-11 hydrocarbons with >98% aromatic. It has good solvent properties and is low in sulfur content and has a high flash ...展开 TOPSol A150 Solvent is a clear transparent liquid with an aromatic odor. It has a high boiling point and is a mixture of predominantly C9-11 hydrocarbons with >98% aromatic. It has good solvent properties and is low in sulfur content and has a high flash point. This product is primarily used as a solvent in paints and coatings. 收起 | |
| TOPSol A150ND | TOP Solvent Company Limited | TOPSol A150ND Solvent is a clear transparent liquid with an aromatic odor. This product is a mixture of predominantly C9-10 with aromatic hydrocarbons and it has less that 1% naphthalene content. It has good solvent properties and is low in sulfur content...展开 TOPSol A150ND Solvent is a clear transparent liquid with an aromatic odor. This product is a mixture of predominantly C9-10 with aromatic hydrocarbons and it has less that 1% naphthalene content. It has good solvent properties and is low in sulfur content and has a high flash point. This product is primarily used as a solvent in paints and coatings. 收起 | |
| TOPSol BF | TOP Solvent Company Limited | TOPSol BF is a transparent liquid that is a quick evaporating hydrocarbon solvent. This product is a solvent that has undergone a great degree of general refining that result in a low level of impurities such as sulfur, olefins, benzene and all aromatics....展开 TOPSol BF is a transparent liquid that is a quick evaporating hydrocarbon solvent. This product is a solvent that has undergone a great degree of general refining that result in a low level of impurities such as sulfur, olefins, benzene and all aromatics. TOPSol BF is primarily used as a solvent in adhesives and sealants. 收起 | |
| TOPSol PM | TOP Solvent Company Limited | TOPSol PM also sometimes known as Propylene glycol methyl ether (PGME), is a colorless, hygroscopic solvent with a similar properties to ethylene oxide-based glycol ethers such as the volatility, viscosity and solvent strength. TOPSol PM is primarily used...展开 TOPSol PM also sometimes known as Propylene glycol methyl ether (PGME), is a colorless, hygroscopic solvent with a similar properties to ethylene oxide-based glycol ethers such as the volatility, viscosity and solvent strength. TOPSol PM is primarily used as a solvent in printing inks, adhesives, paints and coatings. 收起 | |
| TOPSol PMA | TOP Solvent Company Limited | TOPSol PMA is also known as Propylene glycol methyl ether acetate (PGMEA). This product is a colorless, neutral propylene oxide-based glycol ether acetate and has a slight odor and a volatility. It has a viscosity and solvent power that is similar to ethy...展开 TOPSol PMA is also known as Propylene glycol methyl ether acetate (PGMEA). This product is a colorless, neutral propylene oxide-based glycol ether acetate and has a slight odor and a volatility. It has a viscosity and solvent power that is similar to ethylene glycol-based and glycol ether acetates. TOPSol PMA is primarily used as a solvent in printing inks, paints and coatings. 收起 | |
| TOPSol X2000 | TOP Solvent Company Limited | TOPSol X2000 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is broadly used in the rubber and related industry. TOPSol X2000 is primarily used as a solvent in adhesives and sealants. | |
| UNILENE® A100 | Braskem S.A. | UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® A80 | Braskem S.A. | UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...展开 UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® A90 | Braskem S.A. | UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...展开 UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B100 | Braskem S.A. | UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B110 | Braskem S.A. | UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B120 | Braskem S.A. | UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® BS130 | Braskem S.A. | UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...展开 UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® BS140 | Braskem S.A. | UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...展开 UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| White Spirit | Braskem S.A. | White Spirit is a white mineral spirit. | |
| WS 200 | TOP Solvent Company Limited | WS 200 is a clear colored mineral liquid that is derived from petroleum. The White spirit range consists of products that are water-white and typically boil between 150 and 200°C. WS 200 is a combination of natural gases like paraffins, cycloparaffins and...展开 WS 200 is a clear colored mineral liquid that is derived from petroleum. The White spirit range consists of products that are water-white and typically boil between 150 and 200°C. WS 200 is a combination of natural gases like paraffins, cycloparaffins and aromatics.The primary use of this product is in printing inks, paints and coatings. 收起 | |
| Xylene | TOP Solvent Company Limited | Xylene is a clear is a quick evaporating hydrocarbon solvent that has a flash point >21°C. It consists essentially of the three different isomers which are ortho, meta and para xylene. This product also contains the organic compound ethylbenzene which is ...展开 Xylene is a clear is a quick evaporating hydrocarbon solvent that has a flash point >21°C. It consists essentially of the three different isomers which are ortho, meta and para xylene. This product also contains the organic compound ethylbenzene which is highly flammable and has a similar odor to gasoline. Xylene is primarily used in printing inks, adhesives, paints and coatings. 收起 | |
| YGA100-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGA100-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGA110-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA110-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGA110-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA110-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGB100-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGB100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in hot melt road marking paints to increase toughness, hardness, and adhesion. | |
| YGB100-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGB100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in hot melt road marking paints to increase toughness, hardness, and adhesion. |
