| 2-Methylimidazole | Hangzhou Right Chemical Co., Ltd. | 2-Methylimidazole has the chemical structure of C4H6N2. This product appears as white or light yellow granules. It can be used as a curing accelerator for powder coating applications. | |
| Antioxidant SN-1 | Tiarco Chemical | Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds...展开 Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds, and the maximum benefits are best noticed when used in combination with a primary antioxidant in natural and synthetic polymers. It is used in light colored or black compounds such as carpet backing foams, scrim adhesives, SBR latex stabilization, rubber based adhesives, footwear compounds and mechanical goods, and more. 收起 | |
| Benzoin | Hangzhou Right Chemical Co., Ltd. | Benzoin is otherwise known as 2-Hydroxy-2-phenylacetophenone. This product appears as a light yellow or white crystalline powder. It can be used as a raw material to produce benzil or organically-synthesized polyester powder coatings. | |
| Bismuth Octoate | Hangzhou Right Chemical Co., Ltd. | Bismuth Octoate is otherwise known as bismuth tris(2-ethylhexanoate). This product appears as a clear, pale yellow liquid. It can be used in one- and two-component polyurethane systems, e.g., automotive refinish coatings, industrial coatings, or coil co...展开 Bismuth Octoate is otherwise known as bismuth tris(2-ethylhexanoate). This product appears as a clear, pale yellow liquid. It can be used in one- and two-component polyurethane systems, e.g., automotive refinish coatings, industrial coatings, or coil coatings formulated with blocked isocyanates. 收起 | |
| BTPPBR | Hangzhou Right Chemical Co., Ltd. | BTPPBR, or butyltriphenylphosphonium bromide, is a phase transfer catalyst. This product appears as off-white to white crystals. It can be used as a catalyst in the production of powder coatings. It can also be used as a catalyst for the production of ...展开 BTPPBR, or butyltriphenylphosphonium bromide, is a phase transfer catalyst. This product appears as off-white to white crystals. It can be used as a catalyst in the production of powder coatings. It can also be used as a catalyst for the production of polyester resins used in powder coatings. 收起 | |
| CAB-151-0.7 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in p...展开 CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-0.1 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in ...展开 CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-0.5 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing ...展开 CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-20 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in pr...展开 CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-551-0.01 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printi...展开 CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-551-0.2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| Catalyst RC32-18A | Hangzhou Right Chemical Co., Ltd. | Catalyst RC32-18A is a powdered catalyst. This product appears as a free-flowing white powder. It can be used in polyester resin-based powder coating formulations in combination with cross-linker RC1174. Catalyst RC32-18A will provide a "wrinkled" text...展开 Catalyst RC32-18A is a powdered catalyst. This product appears as a free-flowing white powder. It can be used in polyester resin-based powder coating formulations in combination with cross-linker RC1174. Catalyst RC32-18A will provide a "wrinkled" texture and is designed to affect the pre-cure rheology and the cross-linking reaction of RC1174. 收起 | |
| Cerium Octoate | Hangzhou Right Chemical Co., Ltd. | Cerium Octoate is otherwise known as cerium tri(2-ethylhexanoate). This product appears as a clear, yellow liquid. It can be used as a drier for printing inks and coatings. | |
| Cobalt Octoate | Hangzhou Right Chemical Co., Ltd. | Cobalt Octoate is otherwise known as Cobalt bis (2-ethylhexanoate). This product appears as a purplish liquid. It can be used as a drier in paints and varnishes. It can also be used as a drier in inks, resins, and lacquers. | |
| Copper Octoate | Hangzhou Right Chemical Co., Ltd. | Copper Octoate is otherwise known as copper 2-ethylhexanoate. This product appears as a clear, green liquid. It can be used as an anti-fouling agent, bactericide and as a catalyst in marine paints. It can also be used in casting resins, surfacers and c...展开 Copper Octoate is otherwise known as copper 2-ethylhexanoate. This product appears as a clear, green liquid. It can be used as an anti-fouling agent, bactericide and as a catalyst in marine paints. It can also be used in casting resins, surfacers and coatings in unsaturated polyesters. 收起 | |
| Cross-Linking Agent RC1174 | Hangzhou Right Chemical Co., Ltd. | Cross-Linking Agent RC1174 appears as white crystals. This product can be formulated with amine-blocked sulfonic acid salts, in order to obtain durable wrinkle finishes. It is designed for use in powder coatings, and will provide weatherability and good...展开 Cross-Linking Agent RC1174 appears as white crystals. This product can be formulated with amine-blocked sulfonic acid salts, in order to obtain durable wrinkle finishes. It is designed for use in powder coatings, and will provide weatherability and good exterior properties. 收起 | |
| Cross-Linking Agent RC4030 | Hangzhou Right Chemical Co., Ltd. | Cross-Linking Agent RC4030 is a polyurethane adduct to be used in combination with different hydroxyl functional resins. This product appears as pale granules. It can be used in coatings in order to provide weather resistance, good flow properties, good...展开 Cross-Linking Agent RC4030 is a polyurethane adduct to be used in combination with different hydroxyl functional resins. This product appears as pale granules. It can be used in coatings in order to provide weather resistance, good flow properties, good storage stability and good mechanical properties. The end product will have a glossy surface. 收起 | |
| Curing Accelerator RC3126 | Hangzhou Right Chemical Co., Ltd. | Curing Accelerator RC3126 is a master batch with 8% active substances. This product appears as a white, granular solid. It can be used in epoxy/carboxy and epoxy/anhydride reaction functional polyester powder coatings, in order to reduce the curing tem...展开 Curing Accelerator RC3126 is a master batch with 8% active substances. This product appears as a white, granular solid. It can be used in epoxy/carboxy and epoxy/anhydride reaction functional polyester powder coatings, in order to reduce the curing temperature and accelerate the curing speed. It can also reduce curing temperatures in polyester/TGIC systems. 收起 | |
| Diethylene Glycol Ethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Diethylene Glycol Ethyl Ether Acetate appears as a colorless and transparent liquid. It can be used as a coalescing aid for emulsion paints. It is also ideal for use to slow drying in nitrocellulose lacquers, natural paints, or spray paint. | |
| Dipropylene Glycol Monomethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Dipropylene Glycol Monomethyl Ether is a colorless and transparent liquid. It can be used as a solvent in water-based paints and screen-printing inks. It can also be used as the coupling agent (often mix) of dilute aqueous coatings. | |
| Ethylene Glycol Ethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Ethyl Ether Acetate is a colorless and transparent liquid. It can be used as a solvent in protective coatings and inks, as well as a solvent for painting metal and furniture. | |
| Ethylene Glycol Monobutyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monobutyl Ether is a colorless and transparent liquid. It can be used as a solvent in paint and as a solvent in enamel paint remover. | |
| Ethylene Glycol Monobutyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monobutyl Ether Acetate is a colorless and transparent liquid. It can be used as a coalescing aid in emulsion paints. It can also be used in emulsion coatings. | |
| Ethylene Glycol Monoethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monoethyl Ether is a colorless and transparent liquid. It can be used as a solvent in paints and printing inks. It is also used in the preparation of paint thinner and as a raw material for paint. | |
| ETPPBR | Hangzhou Right Chemical Co., Ltd. | ETPPBR, or ethyltriphenylphosphonium bromide, is a phase transfer catalyst. This product appears as off-white to white crystals. It can be used as a catalyst in the production of powder coatings. It can also be used as a catalyst in the production of ...展开 ETPPBR, or ethyltriphenylphosphonium bromide, is a phase transfer catalyst. This product appears as off-white to white crystals. It can be used as a catalyst in the production of powder coatings. It can also be used as a catalyst in the production of polyester resins for powder coatings. 收起 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| HAA Hardener RC552 | Hangzhou Right Chemical Co., Ltd. | HAA Hardener RC552 is a tetra-functional group containing β-hydroxyalkylamide. This product appears as a white powder. It is designed to be a substitute for TGIC and can be used to provide exterior-durable powder coatings free from TGIC. | |
| HAA Hardener RC559 | Hangzhou Right Chemical Co., Ltd. | HAA Hardener RC559 is a hydroxyalkyl amide hardener. This product appears as a white granular solid. It can be used to cure carboxyl-functional polyester for powder coating applications. | |
| Hardener RC-31 | Hangzhou Right Chemical Co., Ltd. | Hardener RC-31 is an epoxy resin having the chemical structure of a cyclic amidine. This product appears as a white or light yellow powder or flake. It can be used in epoxy powder coatings and to modify surface gloss. It can also be used as an accelera...展开 Hardener RC-31 is an epoxy resin having the chemical structure of a cyclic amidine. This product appears as a white or light yellow powder or flake. It can be used in epoxy powder coatings and to modify surface gloss. It can also be used as an accelerator for dicyandiamide and epoxy polyester powder coatings. 收起 | |
| Hardener RC2844 | Hangzhou Right Chemical Co., Ltd. | Hardener RC2844 is either substituted or modified dicyandiamide. This product appears as an off-white powder. It can be used in high gloss pure epoxy powder coatings. It can also be an ingredient in electro-insulation coatings and anti-corrosion coatin...展开 Hardener RC2844 is either substituted or modified dicyandiamide. This product appears as an off-white powder. It can be used in high gloss pure epoxy powder coatings. It can also be an ingredient in electro-insulation coatings and anti-corrosion coatings. 收起 | |
| Isobutyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isobutyl Acetate is a clear liquid without precipitates. It can be used in coatings and as a solvent in polymer paints, adhesives, and isocyanate lacquers. | |
| Isooctyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isooctyl Acetate is a clear liquid with a pleasant, fruity fragrance. It is used to promote flow and retard blushing in formulations such as lacquers, lacquers emulsions in screen inks, parking enamels and air-dry enamels. | |
| Isopropyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isopropyl Acetate is a colorless liquid with a strong, fruity odor. This product is a fast-evaporating solvent. It is used in gravure printing inks for plastic films such as bread wrap. The rest finds many uses in coatings and adhesives. | |
| Matting Agent Rimatt RC7205 | Hangzhou Right Chemical Co., Ltd. | Matting Agent Rimatt RC7205 is based on polyacrylate for hybrid systems. This product appears as a white or yellowish powder. It can be used as a matting agent for powder coatings. The end product will have color stability and low gloss. | |
| Matting Agent Rimatt RC7309 | Hangzhou Right Chemical Co., Ltd. | Matting Agent Rimatt RC7309 is a matting agent that contains wax. This product appears as white or yellowish granules. It can be used in polyester or hybrid powder coating systems. The end product will have weather-resistance, color stability, and low ...展开 Matting Agent Rimatt RC7309 is a matting agent that contains wax. This product appears as white or yellowish granules. It can be used in polyester or hybrid powder coating systems. The end product will have weather-resistance, color stability, and low gloss. Matting Agent Rimatt RC7309 is exclusively recommended for light and pastel shades. 收起 | |
| Matting Agent Rimatt RC7319 | Hangzhou Right Chemical Co., Ltd. | Matting Agent Rimatt RC7319 is a matting agent for polyester systems. This product contains less wax than other products, and appears as a white to yellowish powder. It can be used in powder coatings. Matting Agent Rimatt RC7319 is exclusively recommen...展开 Matting Agent Rimatt RC7319 is a matting agent for polyester systems. This product contains less wax than other products, and appears as a white to yellowish powder. It can be used in powder coatings. Matting Agent Rimatt RC7319 is exclusively recommended for dark and pastel shades. 收起 | |
| Matting Agent Rimatt RC7329 | Hangzhou Right Chemical Co., Ltd. | Matting Agent Rimatt RC7329 is a matting agent for outdoor polyester systems. This product appears as a white to yellowish powder with low wax content. It can be used in polyester powder coatings. The end product will have a smooth surface and good flo...展开 Matting Agent Rimatt RC7329 is a matting agent for outdoor polyester systems. This product appears as a white to yellowish powder with low wax content. It can be used in polyester powder coatings. The end product will have a smooth surface and good flow properties. 收起 | |
| Matting Hardener Rimatt RC68 | Hangzhou Right Chemical Co., Ltd. | Matting Hardener Rimatt RC60 is the salt of polycarboxylic acid with cyclic amidine. This product appears as a white powder. It can be used in both pure epoxy and epoxy-polyester resin powder coatings. The end product will provide either a matte or a s...展开 Matting Hardener Rimatt RC60 is the salt of polycarboxylic acid with cyclic amidine. This product appears as a white powder. It can be used in both pure epoxy and epoxy-polyester resin powder coatings. The end product will provide either a matte or a semi-matte gloss with good flow properties. 收起 | |
| Matting Hardener Rimatt RC7208 | Hangzhou Right Chemical Co., Ltd. | Matting Hardener Rimatt RC7208 is a wax-free, PMA-free, synthetic resin-based matting hardener. This product appears as a white or yellowish powder. It can be used in hybrid powder coating systems. | |
| Micronized Degassing Agent RC3910 | Hangzhou Right Chemical Co., Ltd. | Micronized Degassing Agent RC3910 is a micronized amide wax. This product appears as a very fine, white powder. It can be used to degas powder coatings. It will also improve the end product's flowability. | |
| N-Propyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | N-Propyl Acetate is a colorless and volatile solvent with a mild and fruity odor. It can be used in automotive and plastic coatings and as a solvent in flexographic and screen printing inks. | |
| Neodymium Octoate | Hangzhou Right Chemical Co., Ltd. | Neodymium Octoate is otherwise known as neodymium 2-ethylhexanoate. This product appears as a clear, pale, bluish-purple liquid. It can be used as a catalyst in high-grade printing inks. It can also be used as a grinding dispersant in coating applicati...展开 Neodymium Octoate is otherwise known as neodymium 2-ethylhexanoate. This product appears as a clear, pale, bluish-purple liquid. It can be used as a catalyst in high-grade printing inks. It can also be used as a grinding dispersant in coating applications. 收起 | |
| Nickel Octoate | Hangzhou Right Chemical Co., Ltd. | Nickel Octoate is otherwise known as nickel 2-ethylhexanoate. This product appears as a clear, green liquid. It can be used as a catalyst in high-grade printing inks and as a grinding dispersant for coating applications. | |
| Octocure 462 | Tiarco Chemical | Octocure 462 is an aqueous zinc oxide dispersion readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing SBR and natural latex rubber. | |
| Octocure 487 | Tiarco Chemical | Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product m...展开 Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product may also be used at lower concentrations as a slow precure accelerator in natural latex. 收起 | |
| Octocure 530 | Tiarco Chemical | Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accel...展开 Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accelerator in SBR, neoprene, and nitrile latices. This product is typically used as an activator for MBT and other thiazole accelerators, or in conjunction with dithiocarbamates or thiocarbanilides. 收起 | |
| Octocure 551 | Tiarco Chemical | Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usu...展开 Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usually used in conjunction with diphenyl guanidine. 收起 | |
| Octocure 573 | Tiarco Chemical | Octocure 573 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber. | |
| Octocure 803 | Tiarco Chemical | Octocure 803 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber. | |
| Octocure ZBZ-42 | Tiarco Chemical | Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary acc...展开 Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary accelerators such as ZMBT. Octocure ZBZ-42 is ideal for vulcanization processes where the formation of volatile nitrosoamines needs to be reduced. 收起 | |
| Octocure ZDB-100 | Tiarco Chemical | Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This prod...展开 Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This product can also be applied in low doses in non-curing natural and SBR adhesive compounds as a non-discoloring antioxidant. 收起 | |
| Octocure ZDB-50 | Tiarco Chemical | Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus...展开 Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus. 收起 | |
| Octocure ZDB-50 CF | Tiarco Chemical | Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and h...展开 Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and high modulus. This product can also be used at low doses in noncuring natural and SBR latex compounds as a non-discoloring antioxidant. 收起 | |
| Octocure ZDE-50 | Tiarco Chemical | Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts z...展开 Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts zinc mercaptobenzothiazole. 收起 | |
| Octocure ZDIB-50 | Tiarco Chemical | Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high mo...展开 Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high modulus. As a secondary accelerator, this product works well with thiurams, thiazoles, and guanidines. Octocure ZDIB-50 may be used at low levels to increase cure rates of slower curing systems. It also serves as an effective free-radical emulsion polymerization shortstop in styrene-butadiene rubber (SBR) and acrylonitrile butadiene rubber (NBR) elastomer production. 收起 | |
| Octocure ZDM-50 | Tiarco Chemical | Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suit...展开 Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suited for use as an additive in the production of latex and latex based products. 收起 | |
| Octocure ZMBT-50 | Tiarco Chemical | Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This...展开 Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. 收起 | |
| Octocure ZMBT-50 CF | Tiarco Chemical | Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithioca...展开 Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. 收起 | |
| Octoguard FR-11 DF | Tiarco Chemical | Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...展开 Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 收起 | |
| Octoguard FR-13 DF | Tiarco Chemical | Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...展开 Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 收起 | |
| Octolite 424-50 | Tiarco Chemical | Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant pro...展开 Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in synthetic and natural latex polymers. This product is recommended for use in carboxylated SBR latex compounds and adhesives. 收起 | |
| Octolite 497 | Tiarco Chemical | Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat...展开 Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat, ultraviolet light, and oxidation. This dispersion is milled to a fine particle size for maximum activity. Octolite 497 is well suited for use in the production of food packaging adhesives and with repeated use rubber products. 收起 | |
| Octolite 544 CF | Tiarco Chemical | Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, a...展开 Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, and other latex systems. It is also particularly beneficial in protecting against degradation by trace metals such as copper and manganese. 收起 | |
| Octolite 640 | Tiarco Chemical | Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protectio...展开 Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protection in SBR, natural, and neoprene latex polymers. Octolite 640 is particularly useful for providing superior protection against high-temperature degradation in certain latex polymer compounds. 收起 | |
| Octolite 647 | Tiarco Chemical | Octolite 647 is a yellow to tan aqueous dispersion of polymeric quinoline derivative. This general-purpose semi-staining antioxidant is frequently used in latex compounding to impart high temperature resistance. It also improves ozone resistance of many p...展开 Octolite 647 is a yellow to tan aqueous dispersion of polymeric quinoline derivative. This general-purpose semi-staining antioxidant is frequently used in latex compounding to impart high temperature resistance. It also improves ozone resistance of many polymers. It is non-blooming and of high durability. This product is typically used as a rubber antioxidant stabilizer for natural, butadiene, chloroprene, and nitile latex. Octolite 647 is also used as a corrosion inhibitor and preservative (it retards oxidation, deterioration, and rancidity). 收起 | |
| Octolite 668 | Tiarco Chemical | Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH ran...展开 Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH range for direct addition to latex. It exhibits low volatility and excellent frothability. Octolite 668 is also highly effective in polychloroprene polymers, providing protection against degradation due to heat, light, and oxygen. 收起 | |
| Octolite 806 | Tiarco Chemical | Octolite 806 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (dilaurylthiodipropionate). It provides highly efficient stabilization and antioxidant protection. Octolite 806 is recommended for u...展开 Octolite 806 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (dilaurylthiodipropionate). It provides highly efficient stabilization and antioxidant protection. Octolite 806 is recommended for use in butadiene/styrene and synthetic latex compounds as well as SBR and natural rubber compounds. 收起 | |
| Octolite 809 | Tiarco Chemical | Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-...展开 Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-milled to a fine particle size for maximum activity. Octolite 809 is essentially non-staining but can cause some slight pink discoloration in certain applications. 收起 | |
| Octolite AO-50 | Tiarco Chemical | Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protectio...展开 Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protection to synthetic and natural latex polymers. Octolite AO-50 is ideally suited for use in carboxylated SBR latex compounds and adhesives. 收起 | |
| Octolite WL | Tiarco Chemical | Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against ...展开 Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against the effects of heat, ultraviolet light, and oxidation. Octolite WL is well suited for use in the production of food packaging adhesives and with repeated use rubber products. 收起 | |
| Octopol NB-47 | Tiarco Chemical | Octopol NB-47 is an ultra-fast accelerator composed of sodium dibutyldithiocarbamate. It is ideal for use in natural latex, SBR, and CR latex compounds, where it activates thiazoles in the latex cure system. This product is of particular interest in latex...展开 Octopol NB-47 is an ultra-fast accelerator composed of sodium dibutyldithiocarbamate. It is ideal for use in natural latex, SBR, and CR latex compounds, where it activates thiazoles in the latex cure system. This product is of particular interest in latex compounds where the zinc level from zinc dithiocarbamates can be reduced. 收起 | |
| Octosol 449 | Tiarco Chemical | Octosol 449 is a potassium oleate soap in the form of a yellow to amber liquid. It is prepared from fine oleic acid (red oil) reacted with a minimum excess of potassium hydroxide (KOH, potash). This fatty acid soap plays an important role in latex compoun...展开 Octosol 449 is a potassium oleate soap in the form of a yellow to amber liquid. It is prepared from fine oleic acid (red oil) reacted with a minimum excess of potassium hydroxide (KOH, potash). This fatty acid soap plays an important role in latex compounds by contributing to mechanical and chemical stability. Octosol 449 may be used as a primary frothing aid in gelled latex foam compounds. It may also used as a dispersant for fillers, dry chemicals, and pigments. 收起 | |
| Octosol 571 | Tiarco Chemical | Octosol 571 is a cationic surfactant consisting of lauryl trimethyl ammonium chloride in a solution of water and isopropyl alcohol. It is recommended as an emulsifier in cationic or blended ionic emulsion systems. Its use in latex compounds as a "sensitiz...展开 Octosol 571 is a cationic surfactant consisting of lauryl trimethyl ammonium chloride in a solution of water and isopropyl alcohol. It is recommended as an emulsifier in cationic or blended ionic emulsion systems. Its use in latex compounds as a "sensitizer" is due to the fact that quaternary ammonium surfactants are not compatible with the anionic latex stabilizers. Some latex foams must be gelled before curing in order to mold or emboss while wet, or to prevent loss of gauge due to cell collapse during the cure interval. 收起 | |
| Octosol 687 | Tiarco Chemical | Octosol 687 is a fatty acid soap prepared from ricinoleic acid reacted with a minimum excess of potassium hydroxide (KOH, potash). Potassium ricinoleate plays an important role in latex compounds by contributing to the mechanical and chemical stability. O...展开 Octosol 687 is a fatty acid soap prepared from ricinoleic acid reacted with a minimum excess of potassium hydroxide (KOH, potash). Potassium ricinoleate plays an important role in latex compounds by contributing to the mechanical and chemical stability. Octosol 687 is suggested for use as a primary frothing aid in gelled latex foam compounds. It is may also be used as a dispersant for fillers, dry chemicals, and pigments. 收起 | |
| Octosol 730 | Tiarco Chemical | Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce q...展开 Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce quality-frothed adhesives and latex foams. 收起 | |
| Octosol 731 | Tiarco Chemical | Octosol 731 is an anionic, light yellow liquid solution of sodium salt of a carboxylated polyelectrolyte. It serves as an excellent dispersing aid in wide variety of formulations - including carpet back-coatings, dyes, pigments, and clays, as well as with...展开 Octosol 731 is an anionic, light yellow liquid solution of sodium salt of a carboxylated polyelectrolyte. It serves as an excellent dispersing aid in wide variety of formulations - including carpet back-coatings, dyes, pigments, and clays, as well as with inorganic compounds. 收起 | |
| Octosol 828 | Tiarco Chemical | Octosol 828 is a 12-mole sodium lauryl ether sulfate used in emulsion polymerization. It is generally used with high molecular weight polymers, as well as in high acid systems as an emulsifier. This product minimizes the potential for coagulation and is f...展开 Octosol 828 is a 12-mole sodium lauryl ether sulfate used in emulsion polymerization. It is generally used with high molecular weight polymers, as well as in high acid systems as an emulsifier. This product minimizes the potential for coagulation and is formaldehyde free. 收起 | |
| Octosol 853 | Tiarco Chemical | Octosol 853 is an anionic surfactant, in the form of a dark reddish-brown aqueous solution of sulfated fatty acids. It aids in the mechanical and chemical stability of both natural and synthetic latices during compounding, storage, and application. This p...展开 Octosol 853 is an anionic surfactant, in the form of a dark reddish-brown aqueous solution of sulfated fatty acids. It aids in the mechanical and chemical stability of both natural and synthetic latices during compounding, storage, and application. This product is formulated to prevent premature coagulation of the latex under such conditions as high-speed agitation, acidification, or pigmentation. Octosol 853 may also be used for gelation-control. Used as a dipping aid, it ensures uniform film deposits and good penetration. 收起 | |
| Octosol A-18 | Tiarco Chemical | Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, a...展开 Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, and foaming. It is used as a textile-softening agent, as a suspending agent in emulsion polymerization, as a foaming agent in latex compounds, and in cleaning and penetrating formulations. 收起 | |
| Octosol A-18A | Tiarco Chemical | Octosol A-18A is a dispersion of diammonium-n-octadecylsulfosuccinamate in the form of a clear amber to creamy white liquid or paste, depending on storage temperature. It is considered an ideal foaming agent for use in acrylic latex frothed compounds. Bei...展开 Octosol A-18A is a dispersion of diammonium-n-octadecylsulfosuccinamate in the form of a clear amber to creamy white liquid or paste, depending on storage temperature. It is considered an ideal foaming agent for use in acrylic latex frothed compounds. Being an ammonium neutralized surfactant, Octosol A-18A allows for reduced sodium ion content in formulations where such fixed alkali ions are believed to retard the cross-linking cure systems. 收起 | |
| Octosol ALS | Tiarco Chemical | Octosol ALS is an aqueous solution of a ammonium lauryl sulfate, in the form of a pale clear liquid which readily mixes in water. It is an excellent stabilizer, emulsifier, and dispersant for many industrial aqueous systems. | |
| Octosol SLS | Tiarco Chemical | Octosol SLS is a clear aqueous solution of sodium lauryl sulfate, characterized by light color, low odor, a low cloud point, and low salt content. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a ...展开 Octosol SLS is a clear aqueous solution of sodium lauryl sulfate, characterized by light color, low odor, a low cloud point, and low salt content. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and dispersing agent. Octosol SLS is recommended for use as a biodegradable wetting agent, detergent, and emulsion stabilizer. 收起 | |
| Octosol SLS-30K | Tiarco Chemical | Octosol SLS-30K is a clear, water white to pale yellow, aqueous solution of sodium lauryl sulfate preserved with Kathon CG™. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and d...展开 Octosol SLS-30K is a clear, water white to pale yellow, aqueous solution of sodium lauryl sulfate preserved with Kathon CG™. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and dispersing agent. Octosol SLS-30K is recommended for use as a biodegradable wetting agent, detergent, and emulsion stabilizer. 收起 | |
| Octosperse 425 | Tiarco Chemical | Octosperse 425 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concent...展开 Octosperse 425 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concentration suitable for use in a specific formulation. It is suggested that lab testing information be used for acceptable performance levels. 收起 |
