99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
Akuabrid HS 019 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HS 019 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics. | |
Akuabrid HS 070 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HS 070 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics. | |
Akuarane CRP 3300 | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP 3300 is a liquid, waterborne polyurethane dispersion that displays good corrosion, alkali, and hydrolysis resistance. This product is ideal for use in plastic, metal, and textile coating applications. | |
Akuarane CRP 3500A | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP 3500A is a liquid, waterborne polyurethane dispersion that displays good corrosion, alkali, and hydrolysis resistance. This product is ideal for use in plastic, metal, and textile coating applications. | |
Akuarane CRP 7005B | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP 7005B is a liquid, waterborne polyurethane dispersion that displays good corrosion, alkali, and hydrolysis resistance. This product is ideal for use in plastic, metal, and textile coating applications. | |
Akuarane CRP SR 1310 | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP SR 1310 is a liquid, waterborne polyurethane dispersion that displays good corrosion and alkali resistance. This product is ideal for use in fluorine-based PUD (plastic, metal, and textile) coating applications. | |
Akuarane CRP SR 1330 | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP SR 1330 is a liquid, waterborne polyurethane dispersion that displays good corrosion and alkali resistance. This product is ideal for use in fluorine-based PUD (plastic, metal, and textile) coating applications. | |
Akuarane DTP 1322 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1322 is a milky white, liquid, waterborne polyurethane dispersion that displays good adhesion and rubbery feel. This product is ideal for use in textile coatings and adhesives. | |
Akuarane DTP 1330 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives...展開 Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives. 收起 | |
Aldehyde Resin KY-A81 | Yueyang Keyuan Innovative Materials Co., Ltd. | Aldehyde Resin KY-A81 can be used in various solvent-based paints, solvent-based inks, solvent-free coatings, water-based coatings, powder coatings and has compatibility with some resins. Examples of the resin's use are in car mending paints. It can also...展開 Aldehyde Resin KY-A81 can be used in various solvent-based paints, solvent-based inks, solvent-free coatings, water-based coatings, powder coatings and has compatibility with some resins. Examples of the resin's use are in car mending paints. It can also be used as a carrier for pigment paste. 收起 | |
Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
Antifoam V12 | Basildon Chemical Company Ltd. | Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in p...展開 Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in printing inks, paints, glues, paint resins, and adhesives. 收起 | |
BC 403 | Basildon Chemical Company Ltd. | BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...展開 BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.03. 收起 | |
BC 404 | Basildon Chemical Company Ltd. | BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...展開 BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.06, and an INCI name of PEG-8 Dimethicone. 收起 | |
BC Antifoam 2226 | Basildon Chemical Company Ltd. | BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100,...展開 BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100, and a specific gravity of 1.0. 收起 | |
BIT | ChemFine International Co., Ltd. | BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, pri...展開 BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, printing ink and more. 收起 | |
Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
Ekosol ES 1000 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synth...展開 Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synthetic leather coatings. 收起 | |
Ekosol ES 1500T | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 1500T is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and high transparency. This product is ideal for use in direct screen printing ink applications. | |
Ekosol ES 2500 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applicat...展開 Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applications. 收起 | |
Ekosol ES 2600 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications...展開 Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications. 收起 | |
Ekosol ES 3450A | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printi...展開 Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printing, and hot foil stamping applications. 收起 | |
Ekosol ES 5300W | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal f...展開 Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal for use in hot-peel transfer printing and digitally printed white backing applications. 收起 | |
Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
Hycure BDK | ChemFine International Co., Ltd. | Hycure BDK, also known as 2,2-Dimethoxy- 2-Phenylacetophenone, is a photoinitiator that is mainly used as the light curing agent for ultraviolet curing systems, metal paints, paper paints, and is applied to printing ink. | |
Hycure Benzophenone | ChemFine International Co., Ltd. | Hycure Benzophenone is an ultraviolet radiation absorber and intermediate for organic pigments. | |
Hycure ITX | ChemFine International Co., Ltd. | Hycure ITX, also known as Isopropyl thioxanthone, has applications in color or transparent UV-photocurable ink, binder, and paint. | |
Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
KY-120 Ketone Resin | Yueyang Keyuan Innovative Materials Co., Ltd. | KY-120 Ketone Resin is a condensation from cyclohexanone that is bright and resistant to hydrolysis. It can be used in many types of inks, paints and coating formulations and can also be used in the manufacturing of pigment pastes. | |
KY-A81 Aldehyde Resin | Yueyang Keyuan Innovative Materials Co., Ltd. | KY-A81 Aldehyde Resin is a suitable resin for many solvent-based paints and inks including car mending paints. It can also be used in various coatings and as a pigment carrier in a paste form. | |
Manganese Octoate (EGEDry 152201) | EGE Kimya San ve Tic A.S. | Manganese Octoate (EGEDry 152201) is a clear liquid that consists of manganese octoate. This product is often used as an active drier in pigmented systems, conventional architectural paints, wood coatings, and printing inks. It is soluble in organic solve...展開 Manganese Octoate (EGEDry 152201) is a clear liquid that consists of manganese octoate. This product is often used as an active drier in pigmented systems, conventional architectural paints, wood coatings, and printing inks. It is soluble in organic solvent and oils, and has a manganese metal content of 10% and a total solids content of 75%. 收起 | |
Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起 | |
SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起 | |
SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起 | |
Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起 | |
Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起 | |
SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起 | |
SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起 | |
THEIC | ChemFine International Co., Ltd. | THEIC, also known as Tris (2-Hydroxyethyl) Isocyanurate, has applications in modified polyimide insulating varnish, paint for the base plate of automobiles, the manufacture of high-quality heat-resisting alcohol acid and plasticizer, and in the printing, ...展開 THEIC, also known as Tris (2-Hydroxyethyl) Isocyanurate, has applications in modified polyimide insulating varnish, paint for the base plate of automobiles, the manufacture of high-quality heat-resisting alcohol acid and plasticizer, and in the printing, textile, plastics, and photo industries. 收起 | |
UVB2000 Special Tertiary Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...展開 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 收起 | |
UVB2200 Reactive Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...展開 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. 收起 | |
UVE3216 Modified Epoxy Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...展開 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. 收起 | |
UVU 6451 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications. | |
UVU6219 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...展開 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. 收起 | |
UVU6305 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...展開 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. 收起 | |
UVU6609 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications. | |
UVU6906 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications. | |
Was A-81 Aldehyde Resin | Yueyang Keyuan Innovative Materials Co., Ltd. | Was A-81 Aldehyde Resin is a colorless or yellowish aldehyde polycondensation resin that is insoluble in water, but can dissolve in most organic solvents and paint/ink formulations. This product is commonly used for general paste grinding resin and in co...展開 Was A-81 Aldehyde Resin is a colorless or yellowish aldehyde polycondensation resin that is insoluble in water, but can dissolve in most organic solvents and paint/ink formulations. This product is commonly used for general paste grinding resin and in coating formulation. 收起 | |
Cenomic™ 1 | Bühler AG | Cenomic™ 1 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...展開 Cenomic™ 1 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 收起 | |
Cenomic™ 15 | Bühler AG | Cenomic™ 15 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler ...展開 Cenomic™ 15 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 收起 | |
Cenomic™ 3 | Bühler AG | Cenomic™ 3 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...展開 Cenomic™ 3 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 收起 | |
Cenomic™ 6 | Bühler AG | Cenomic™ 6 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...展開 Cenomic™ 6 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 收起 | |
MacroMedia™ | Bühler AG | MacroMedia™ is unique to the market because of its combination of a high-performance pump and small-volume grinding unit. Thanks to improved process control in the pre-grinding stage, fluctuating raw-material qualities can be balanced out and uniform prop...展開 MacroMedia™ is unique to the market because of its combination of a high-performance pump and small-volume grinding unit. Thanks to improved process control in the pre-grinding stage, fluctuating raw-material qualities can be balanced out and uniform properties achieved for the pre-ground intermediate products. This produces optimum results in fine grinding and consequently increases the quality of the end product. At the same time, the system reduces production costs due to an improved material yield and optimized energy efficiency compared with other pre-grinding solutions. 收起 | |
MicroMedia™ L | Bühler AG | MicroMedia™ L is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMe...展開 MicroMedia™ L is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 | |
MicroMedia™ L-C | Bühler AG | MicroMedia™ L-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micro...展開 MicroMedia™ L-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 | |
MicroMedia™ P1-C | Bühler AG | MicroMedia™ P1-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micr...展開 MicroMedia™ P1-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 | |
MicroMedia™ P2-C | Bühler AG | MicroMedia™ P2-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micr...展開 MicroMedia™ P2-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 | |
MicroMedia™ X1 | Bühler AG | MicroMedia™ X1 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...展開 MicroMedia™ X1 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 | |
MicroMedia™ X2 | Bühler AG | MicroMedia™ X2 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...展開 MicroMedia™ X2 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 | |
MicroMedia™ X3 | Bühler AG | MicroMedia™ X3 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...展開 MicroMedia™ X3 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 | |
MicroMedia™ X4 | Bühler AG | MicroMedia™ X4 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...展開 MicroMedia™ X4 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 | |
Performix™ HSD-15 | Bühler AG | Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...展開 Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa 收起 | |
Performix™ HSD-20 | Bühler AG | Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...展開 Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa 收起 | |
Performix™ HSD-30 | Bühler AG | Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...展開 Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa 收起 | |
Performix™ HSD-40 | Bühler AG | Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...展開 Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa 收起 | |
PML 2 | Bühler AG | The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true gr...展開 The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true grinding applications, metal-free dispersion of electronic materials or nano applications – the PML 2 is the right solution. 收起 | |
PML easy | Bühler AG | PML easy is a universal bead mill platform for lab-scaled process development has a modular design and offers unmatched flexibility. Its core piece is a resistant and powerful drive which can be combined with two different process units tailored to specif...展開 PML easy is a universal bead mill platform for lab-scaled process development has a modular design and offers unmatched flexibility. Its core piece is a resistant and powerful drive which can be combined with two different process units tailored to specific applications. *Available in the regions Latin America, Asia, Middle East and Africa 收起 | |
Trias™ 300 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...展開 Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. 收起 | |
Trias™ 600 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...展開 Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. 收起 | |
Trias™ 800 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...展開 Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. 收起 | |
Trinomic™ 1300 | Bühler AG | Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative...展開 Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative paints, toners, coatings and lubricants, but also for materials for the cosmetics industries. The three-roll mill is designed for meeting high quality demands and at the same time enables convenient, easy operation and quick cleaning 收起 | |
Trinomic™ 600 | Bühler AG | Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative...展開 Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative paints, toners, coatings and lubricants, but also for materials for the cosmetics industries. The three-roll mill is designed for meeting high quality demands and at the same time enables convenient, easy operation and quick cleaning 收起 |