| Interior/Exterior Semi Glossy Paint Waterborne Coatings (Formulation #21-10005) | Patcham USA | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...view more Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. -7 NS/ min. of 15 μm. view less | |
| Reducing Leachable Components in Waterborne Architectural Paints | BASF Dispersions & Resins | The composition of waterborne paints and coatings rely on several surface active or water soluble components for their production, stability and performance. Unfortunately these ingredients can migrate to the paint surface leaving visible streaks referred...view more The composition of waterborne paints and coatings rely on several surface active or water soluble components for their production, stability and performance. Unfortunately these ingredients can migrate to the paint surface leaving visible streaks referred to as “Surfactant Leaching/Staining” or “Snail Trails”. Staining typically occurs after the paint has been exposed to specific conditions such as high humidity and water condensation. The presence of water on a paint surface can concentrate leachable materials into a non-uniform pattern of visible glossy streaks. A careful selection of formulation ingredients can help reduce the extent of staining. view less | |
| Waterborne Clear-Coating (Formulation #WBPU821) | ASCOTEC | Waterborne Polyurethane Clear Coating based on Esacote® PU77, ASCONIUM® 114 and ASCOTRAN® H10. | |
| Waterborne Clear-Coating (Formulation #WBPU1004T) | ASCOTEC | Waterborne Polyurethane Clear Coating based on Esacote® PU61, ASCONIUM® 114 and ASCOTRAN® H10. | |
| Rubber Paint, Water-Based (Formulation #A10102.2 [11]) | Hoffmann Mineral | Rubber Paint, Water-Based (Formulation #A10102.2 [11]) featuring SILLITIN Z 86. | |
| Silicate Paint, Water-Based (Formulation #F14401.0 [1]) | Hoffmann Mineral | Silicate Paint, Water-Based (Formulation #F14401.0 [1]) featuring SILLITIN N 85. | |
| 2K PU Waterborne Paint (Formulation #SPF_CTG_002_2203) | Arkema Rheology & Specialty Additives | This waterborne paint features Coadis™ 790 & Coapur™ XS 71. | |
| 2K Waterborne PUR (Formulation #A-145) | ICL Phosphate Specialty | 2K Water-based PUR based on BAYHYDROL A-145/ DESMODUR XP 2410 using HALOX® 430 & 550 | |
| 2K Waterborne Polyurethane (Formulation #VP 2235 1) | ICL Phosphate Specialty | 2K Water-based Polyurethane using HALOX® SZP-391 | |
| Rust Converter, Water-Based (Formulation #R10102.2 [23]) | Hoffmann Mineral | Rust Converter, Water-Based (Formulation #R10102.2 [23]) featuring SILLITIN Z 86. | |
| Waterborne Epoxy Primer (Formulation #21- 10001) | Patcham USA | This waterborne epoxy primer features Pat-Add DA 817. It is suitable for general industrial coatings. | |
| Waterborne White Primer (Formulation #WBACRY2229) | ASCOTEC | White Waterborne Styrene Acrylic Primer based on Maincote® 100, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne White Primer (Formulation #WBACRY3726) | ASCOTEC | White Waterborne Styrene Acrylic Primer based on Maincote® PR71K, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne Grey Primer (Formulation #WBACRY8728) | ASCOTEC | Grey Waterborne Styrene Acrylic Primer based on Neocryl® XK801, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Waterborne Red Primer (Formulation #WBACRY8730) | ASCOTEC | Red Waterborne Styrene Acrylic Primer based on Neocryl® XK801, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBACRY445) | ASCOTEC | White Waterborne Acrylic DTM Paint based on Maincote® 1100, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBACRY6999) | ASCOTEC | White Waterborne Acrylic DTM Paint based on EPS 595, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBALKY404) | ASCOTEC | White Waterborne Alkyd DTM Paint based on Inokem® 3301, ASCONIUM® 114 and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBALKY802) | ASCOTEC | White Waterborne Alkyd DTM Paint based on Inokem® 3304, ASCONIUM® 114 and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBACRY2033) | ASCOTEC | White Waterborne Styrene Acrylic DTM Paint based on Carboset® CR765, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBACRY8111) | ASCOTEC | White Waterborne Styrene Acrylic DTM Paint based on Maincote® HG100, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne White Primer (Formulation #WBEPOX048) | ASCOTEC | White Waterborne 2K EPOXY DTM Paint based on Epirez® 6520, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Rust Inhibitive Primer, Water-Based (Formulation #R10103.2 [2]) | Hoffmann Mineral | Rust Inhibitive Primer, Water-Based (Formulation #R10103.2 [2]) featuring SILLITIN Z 86. | |
| Standard 2K Waterborne Polyurethane (Formulation #VP 2235 1) | ICL Phosphate Specialty | Standard 2K Water-based Polyurethane using HALOX® SZP-391 | |
| Rust Inhibitive Primer, Water-Based (Formulation #R11403.0 [1]) | Hoffmann Mineral | Rust Inhibitive Primer, Water-Based (Formulation #R11403.0 [1]) featuring SILLITIN Z 86. | |
| Waterborne Red Iron Oxide Acrylic Dispersion (Formulation #54D) | ICL Phosphate Specialty | Water-based Red Iron Oxide Acrylic Dispersion using HALOX® 570 | |
| High Quality Facade Paint, Water-Based (Formulation #F10105.2A) | Hoffmann Mineral | High Quality Facade Paint, Water-Based (Formulation #F10105.2A) featuring SILLITIN V 88 and SILLITIN Z 89. | |
| Dispersion-Silicate Facade Paint, Water-Based Only Silicate Fillers (Formulation #F14403.2A) | Hoffmann Mineral | Dispersion-Silicate Facade Paint, Water-Based Only Silicate Fillers (Formulation #F14403.2A) featuring SILLITIN V 88 and SILLITIN Z 89. | |
| Waterborne White DTM (Formulation #WBACRY799-389W) | ASCOTEC | White Waterborne Acrylic DTM Paint based on ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Dip Impregnation For Wood, Water-Based (Formulation #R11401.0 [1]) | Hoffmann Mineral | Dip Impregnation For Wood, Water-Based (Formulation #R11401.0 [1]) featuring SILLITIN Z 86. | |
| Nubirox 106 in a Waterborne Alkyd System (Formulation #AA 13606) | Ferro Pigments | Formulation AA 13606 is an anticorrosive formulation based on a waterborne alkyd system and Nubirox 106. | |
| Nubirox 302 in a Waterborne Alkyd System (Formulation #AA 13610) | Ferro Pigments | Formulation AA 13610 is an anticorrosive formulation based on a waterborne alkyd system and Nubirox 302. | |
| Nubirox 106 in a Waterborne Epoxy System (Formulation #EPPAA 12463) | Ferro Pigments | Formulation EPPAA 12463 is an anticorrosive formulation based on a waterborne epoxy system and Nubirox 106. | |
| Waterborne Red Iron Oxide Epoxy Primer (Formulation #WY-55) | ICL Phosphate Specialty | Water-based Red Iron Oxide Epoxy Primer using HALOX® SW-111 | |
| White Waterborne Alkyd DTM (Formulation #WBALKYDUY330W) | ASCOTEC | White Waterborne Alkyd DTM Paint based on Worleesol E330W®, ASCONIUM® 111® & ASCOTRAN® H10. | |
| WATERBORNE WHITE DTM (Formulation #WBEPOX601-141S1) | ASCOTEC | This waterborne white DTM features ACQUAPOX 110 with ASCONIUM-141S1. | |
| Red Waterborne Anti - Corrosive Paint, PVC 22% (Formulation #RSD20) | ICL Phosphate Specialty | Red Water-based Anti-Corrosive Paint using HALOX® SW-111 and HEUCOPHOS® ZMP Synergy | |
| Dispersion-Silicate Facade Paint, Water Based (Formulation #F14402.0 [1]) | Hoffmann Mineral | Dispersion-Silicate Facade Paint, Water Based (Formulation #F14402.0 [1]) featuring SILLITIN N 85. | |
| Nubirox 106 in Water Based DTM Alkyd System (Formulation #AA 19668) | Ferro Pigments | This water based DTM alkyd system features Nubirox 106 & Nubirox FR-10. | |
| Light Grey Waterborne Acrylic Primer using HALOX 430 (Formulation #86ER) | ICL Phosphate Specialty | Light Grey Water-based Acrylic Primer using HALOX® 430 | |
| Nubirox 302 in Water Based DTM Alkyd System (Formulation #AA 19670) | Ferro Pigments | This water based DTM alkyd system features Nubirox 302. | |
| Dispersion-Silicate Facade Paint, Water-Based Neuburg Siliceous Earth Only (Formulation #F14403.2C) | Hoffmann Mineral | Dispersion-Silicate Facade Paint, Water-Based Neuburg Siliceous Earth Only (Formulation #F14403.2C) featuring SILLITIN V 88 and SILLITIN Z 89. | |
| Nubirox 106 in a Waterborne Styrene Acrylic System (Formulation #EAA 12672) | Ferro Pigments | Formulation EAA 12672 is an anticorrosive formulation based on a waterborne styrene acrylic system and Nubirox 106. | |
| Nubirox 301 in a Waterborne Styrene Acrylic System (Formulation #EAA 12674) | Ferro Pigments | Formulation EAA 12674 is an anticorrosive formulation based on a waterborne styrene acrylic system and Nubirox 301. | |
| Nubirox 106 in a Waterborne Pure Acrylic System (Formulation #AA 13265) | Ferro Pigments | Formulation AA 13265 is an anticorrosive formulation based on a waterborne pure acrylic system and Nubirox 106. | |
| Nubirox 302 in a Waterborne Pure Acrylic System (Formulation #AA 13269) | Ferro Pigments | Formulation AA 13269 is an anticorrosive formulation based on a waterborne pure acrylic system and Nubirox 302. | |
| Light Green Waterborne Anti - Corrosive Primer, PVC 22% (Formulation #RSD20) | ICL Phosphate Specialty | Light Green Water-based Anti-Corrosive Primer using HALOX® SW-111 | |
| Waterborne 2K High Performance Anti-Corrosion Primer (Formulation #VEP 2382) | ICL Phosphate Specialty | Water-based 2K High Performance Anti-Corrosion Primer using HALOX® CW-491 | |
| Waterborne Acrylic Primer using HALOX 430 and HALOX 515 (Formulation #86ER) | ICL Phosphate Specialty | Water-based Acrylic Primer using HALOX® 430 & HALOX® 515 | |
| Waterborne White DTM (Formulation #ORGAL F6560 – 01-24) | ASCOTEC | White waterborne Acrylic DTM based on ORGAL F 6560, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Dispersion-Silicate Facade Paint, Water-Based with Calcium Carbonate as Main Filler (Formulation #F14403.2B) | Hoffmann Mineral | Dispersion-Silicate Facade Paint, Water-Based with Calcium Carbonate as Main Filler (Formulation #F14403.2B) featuring SILLITIN V 88 and SILLITIN Z 89. | |
| Automotive Refinish: Quick Dry Water-based Primer Surfacer | BASF Dispersions & Resins | This is a water-based 1K automotive refinish primer surfacer formulation featuring JONCRYL® PRO 1525. | |
| Heavy Metal Free 2K Waterborne Epoxy Dispersion Marine Primer (Formulation #WH-53) | ICL Phosphate Specialty | Heavy Metal Free 2K Water-based Epoxy Dispersion Marine Primer using HALOX® CW-491 | |
| New! Waterborne White DTM Paint (Formulation #TEXCRYL M59 -01-24) | ASCOTEC | White waterborne Acrylic DTM based on TEXCRYL M59, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne Anticorrosion Alkyd PU Emulsion Paint (Formulation #SPF_CTG_014_2203) | Arkema Rheology & Specialty Additives | This waterborne anticorrosion alkyd PU emulsion paint features Coadis™ 790 and Coapure™ 830 W. | |
| 1K Water-Based Primer Surfacer for Automotive Refinish | BASF Dispersions & Resins | This water-based primer surfacer is for automotive refinishing. It features low VOC content, quick sanding times, and good direct-to-metal performance. | |
| Waterbased Pigmented Acrylic Primer (Formulation #SPF_CTG_003_2203) | Arkema Rheology & Specialty Additives | This waterbased pigmented acrylic primer features Coadis™ 790. | |
| Water-Based Ink Jet Dispersion (Formulation #ETH 21207-1) | Ethox Chemicals | Water-Based Ink Jet Dispersion (Formulation #ETH 21207-1). | |
| Water-Based Ink Jet Dispersion (Formulation #ETH 21207-2) | Ethox Chemicals | Water-Based Ink Jet Dispersion (Formulation #ETH 21207-2). | |
| Heavy Metal Free 2K Waterborne Epoxy Dispersion Industrial Maintenance Primer (Formulation #WH-53) | ICL Phosphate Specialty | Heavy Metal Free 2K Water-based Epoxy Dispersion Industrial Maintenance Primer using HALOX® CW-491 | |
| Nubirox 106 in Water Based Acrylic System (Formulation #AA 13265) | Ferro Pigments | This water based acrylic system features Nubirox FR-10 & Nubirox 106. | |
| 2K Waterborne Primer - Clear (Formulation #148/010 - 016) | Incorez Ltd. | This formulation is a clear concrete primer for two pack waterborne epoxy systems. It features excellent adhesion, high gloss, a long pot life, and utilizes the product Amirez 148/010. | |
| 2K Waterborne Primer - Clear (Formulation #148/024 - 017) | Incorez Ltd. | This formulation is a clear concrete primer for two pack waterborne epoxy systems. It features excellent adhesion, high gloss, good hardness, faster drying and utilizes the product Amirez 148/024. | |
| 2K Waterborne Wall Paint - White (Formulation #142/148-024 - 022) | Incorez Ltd. | This white waterborne wall paint features Amirez 142 and Amirez 148/024. | |
| Water-based 1K High Gloss Acrylic DTM (Formulation #33430-56) | BASF Dispersions & Resins | This is a water-based 1K high gloss acrylic DTM featuring JONCRYL® PRO 1522. | |
| Waterbased 2K Pigmented Glossy Topcoat (Formulation #SPF_CTG_018_2203) | Arkema Rheology & Specialty Additives | This waterbased top coat features Coapur™ 2025 and Coadis™ 790. | |
| Waterbased UV-Curable Satin Topcoat (Formulation #SPF_CTG_017_2203) | Arkema Rheology & Specialty Additives | This waterbased top coat features Coapur™ 2025 and Coadis™ 790. | |
| Waterborne Alkyd Emulsion Primer (Resydrol) (Formulation #3.1.2) | GRACE | Waterborne Alkyd Emulsion Primer (Resydrol) (Formulation #3.1.2) is a guideline formulation for general industrial applications. Resydrol 4333 is a water-thinnable modified alkyd emulsion neutralised by ammonia and containing a small amount of cosolvent (2...view more Waterborne Alkyd Emulsion Primer (Resydrol) (Formulation #3.1.2) is a guideline formulation for general industrial applications. Resydrol 4333 is a water-thinnable modified alkyd emulsion neutralised by ammonia and containing a small amount of cosolvent (2.5 wt.-% on total formulation). Borchigel L 75, a diurethane thickening agent, is needed to stabilise the viscosity during storage. The combination of SHIELDEX® anti-corrosive pigments with Alcophor 827 leads to synergistic effects in the corrosion resistance of the primer. view less | |
| Waterborne Styrene-Butadiene Primer (Bayhydrol) (Formulation #3.3) | GRACE | Waterborne Styrene-Butadiene Primer (Bayhydrol) (Formulation #3.3) is a guideline formulation for general industrial applications. Bayhydrol B130 is a water thinnable styrene-butadiene emulsion modified with maleinised oil and neutralised with a mixture of...view more Waterborne Styrene-Butadiene Primer (Bayhydrol) (Formulation #3.3) is a guideline formulation for general industrial applications. Bayhydrol B130 is a water thinnable styrene-butadiene emulsion modified with maleinised oil and neutralised with a mixture of triethylamine and ammonia. Little or no cosolvent is necessary for this resin. The combination with Lipaton SB 5521, styrene-butadiene dispersion leads to improved film properties (higher flexibility and overcoatability) and water resistance. The addition level of zinc oxide is optimum at 1 wt.-%, and is recommended in combination with SHIELDEX® AC 5 anti-corrosive pigments in this case. view less | |
| DP25 Waterbased Concentrate at 60% (Formulation #W6210) | Ferro Pigments | Pigment concentrate of ultramarine blue suitable for waterborne paints. | |
| Waterborne Styrene-Acrylic Emulsion (Neocryl XK-65) (Formulation #3.4.1) | GRACE | Waterborne Styrene-Acrylic Emulsion (Neocryl XK-65) (Formulation #3.4.1) is guideline formulation for industrial applications. Neocryl XK-65 is a water-borne rheology controlled styrene-acrylic emulsion designed for automotive primer applications. Dynol 6...view more Waterborne Styrene-Acrylic Emulsion (Neocryl XK-65) (Formulation #3.4.1) is guideline formulation for industrial applications. Neocryl XK-65 is a water-borne rheology controlled styrene-acrylic emulsion designed for automotive primer applications. Dynol 604 was the most effective dispersing agent in combination with SHIELDEX® AC 5 anti-corrosive pigments. A small addition of AMP 95 was beneficial for paint stability. Ser-ad FA 379 is a nitrite free flash rust inhibitor which is recommended if problems with flash rust occur. view less | |
| Water-borne Styrene-Acrylic Primer (Acronal) (Formulation #3.4) | GRACE | Water-borne Styrene-Acrylic Primer (Acronal) (Formulation #3.4) is a guideline formulation for general industrial applications. Acronal S760 is a self cross-linking styrene-acrylic dispersion which can be cured at room temperature by the addition of acid ...view more Water-borne Styrene-Acrylic Primer (Acronal) (Formulation #3.4) is a guideline formulation for general industrial applications. Acronal S760 is a self cross-linking styrene-acrylic dispersion which can be cured at room temperature by the addition of acid catalysts. Pre-neutralisation of Cycat 500 and phosphoric acid with AMP 95 and ammonia is necessary to ensure paint stability. The addition of AMP 95 also helps to heat stabilise the paint during milling. Higher PVC-values reduce the salt spray performance, and values around 20 to 30 vol.-% are suggested. Alternative fillers such as talcs, calcium carbonates (Millicarb B from Omya) or dolomites (Microdol extra from Norwegian Talcs) or combinations thereof can be used satisfactorily. view less | |
| Water-borne Alkyd Emulsion Red Iron Oxide Primer (Formulation #111413) | Vanderbilt Minerals, LLC | A formulation for a water-borne alkyd emulsion red iron oxide primer which utilizes VAN GEL® SX, DARVAN® CN, VANSIL® W-30, and ACTIV-8®. | |
| Alkali Resistant Waterbased Primer (Formulation #4641-010) | BASF Dispersions & Resins | This alkali resistant waterbased primer to meet MPI #3 and features ACRONAL PLUS® 4641. | |
| Waterborne White DTM Based on WORLEESOL VP E 320W With ASCONIUM® 111 (Formulation #WBALKYDUY1302W) | ASCOTEC | White waterborne Alkyd-Urethane DTM based on Worleesol® VP E 320W, ASCONIUM® 111 and ASCOTRAN® H10. | |
| Nubifer NB-5970 Waterbased Concentration at 60% (Formulation #W6467) | Ferro Pigments | Water based pigment preparation of Black Iron Oxide. | |
| Nubifer Y-5028 Waterbased Concentrate at 55% (Formulation #W6387) | Ferro Pigments | Water based pigment concentrate of Yellow Iron Oxide. | |
| Water-Based Single Component High Gloss Acrylic for DTM and Topcoat Applications | BASF Dispersions & Resins | High performance coatings with low VOC content are needed to meet the market demand and government regulation. BASF has developed a low VOC, high performance, water-based coating system for direct to metal and topcoat applications. | |
| Nubicoat HWR Waterbased Concentrate at 50% (Formulation #W6387) | Ferro Pigments | Waterborne pigment dispersion of acid resistant ultramarine blue. | |
| Nubicoat HTS Waterbased Caoncentrate at 60% (Formulation #W2953) | Ferro Pigments | Pigment concentrate of ultramarine blue suitable for waterborne paints. | |
| Nubicoat HWR Waterbased Concentrate at 57% (Formulation #W2995) | Ferro Pigments | Pigment concentrate of ultramarine blue suitable for waterborne paints. | |
| Nubix V60 Waterbased Concentrate at 55% (Formulation #W2557) | Ferro Pigments | Pigment concentrate of Ultramarine violet suitable for waterborne paints. | |
| 2K Waterborne Sealer - Clear (Formulation #142 - 019) | Incorez Ltd. | This formulation is a clear concrete sealer for waterborne epoxy systems. It features high gloss, excellent hardness, good chemical and water resistance that utilizes the product Amirez 142. | |
| Water-borne Vinyl Acrylic Dispersion Primer (Formulation #3.2) | GRACE | Water-borne Vinyl Acrylic Dispersion Primer (Formulation #3.2) is a guideline formulation offered to show reduced blistering and wet dispersion loss at the scribe compared to a control bank. Haloflex 202 is a water thinnable vinyl-acrylic dispersion with a...view more Water-borne Vinyl Acrylic Dispersion Primer (Formulation #3.2) is a guideline formulation offered to show reduced blistering and wet dispersion loss at the scribe compared to a control bank. Haloflex 202 is a water thinnable vinyl-acrylic dispersion with an acidic pH. The addition of Alcophor 827 is beneficial in two respects: the pH is stabilised at 6.5 which would otherwise be buffered by SHIELDEX® anti-corrosive pigments, and it also improves the corrosion resistanceafter hot salt spray and humidity exposure. The addition level of SHIELDEX® anti-corrosive pigments should not exceed 3 wt.-% to ensure that the pH of the final formulation does not exceed 7. view less | |
| Nubifer Y-5028 Waterbased Concentrate at 60% (Formulation #W5578) | Ferro Pigments | Pigment concentrate of Nubifer Y-5028 for waterborne paints. | |
| Nubicoat HRD Waterbased Pigment Concentrate at 55% (Formulation #W6785) | Ferro Pigments | Pigment concentrate of Highly Reddish Ultramarine Blue for waterborne paints. | |
| Nubicoat HWR Waterbased Pigment Concentrate at 55% (Formulation #W5578) | Ferro Pigments | Pigment concentrate of Highly Reddish Ultramarine Blue for waterborne paints. | |
| Nubifer R-5530 Waterbased Concentrate at 66% (Formulation #W5578) | Ferro Pigments | Pigment concentrate of Nubifer R-5530 suitable for waterborne paints. | |
| Nubifer Y-5028 Waterbased Concentrate at 65% (Formulation #W6588) | Ferro Pigments | Pigment concentrate of yellow iron oxide suitable for waterborne paints. | |
| Nubivan Y-902 Waterbased Concentrate at 70% (Formulation #W6616) | Ferro Pigments | Pigment concentrate of bismuth vanadate for waterborne paints, low VOC content. | |
| Clear coat [multilayer], water-based, matte, preferably for wood (Formulation #L00006.1) | Hoffmann Mineral | This formulation utilizes GLOXIL WW SL. | |
| Nubivan Y-901 Waterbased Concentrate at 70% (Formulation #W6616) | Ferro Pigments | Pigment concentrate of Nubivan Y-901 for waterborne paints, low VOC content. | |
| Nubicoat HWR Waterbased Concentrate at 60% with BASF Additives | Ferro Pigments | This is a pigment concentrate of encapsulated Ultramarine Blue for waterbased paints. | |
| Rapid Dry Waterborne Epoxy Primer (Formulation #3515) | ICL Phosphate Specialty | Rapid Dry Waterbase Epoxy Primer with HALOX® SW-111 | |
| Nubicoat HWR Waterbased Concentrate at 60% with BYK-Chemie Additives | Ferro Pigments | This is a pigment concentrate of encapsulated Ultramarine Blue for waterbased paints. | |
| Nubicoat HWR Waterbased Concentrate at 55% with Air Products Additives | Ferro Pigments | This formulation produces a pigment concentrate of encapsulated Ultramarine Blue for waterbased paints. | |
| Nubifer R-5530 Waterbased Concentrate at 67% with BASF Additives | Ferro Pigments | This is a pigment concentrate of micronized Red Iron Oxide for waterbased paints. | |
| Nubifer NB-5970 Waterbased Concentrate at 60% with BASF Additives | Ferro Pigments | This formulation is a pigment concentrate of micronized Black Iron Oxide for waterbased paints. | |
| Nubifer NB-5970 Waterbased Concentrate at 60% with Lubrizol Additives | Ferro Pigments | This formulation is a pigment concentrate of micronized Black Iron Oxide for waterbased paints. | |
| Nubifer Y-5028 Waterbased Concentrate at 55% with BASF Additives | Ferro Pigments | This formulation produces a pigment concentrate of micronized Yellow Iron Oxide for waterbased paints. |
