| PanTINT® 87G1705 | Pan Technology Inc. | PanTINT® 87G1705 is a concentrated dispersion of Phthalo Green in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name GR 7. PanTINT® 87 Coloran...view more PanTINT® 87G1705 is a concentrated dispersion of Phthalo Green in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name GR 7. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| CN136 | Sartomer Americas | CN136 is an amine-modified version of bisphenol A based epoxy acrylate providing a good balance of water properties, high reactivity and exceptionally fast cure. Suggested applications are adhesives, anaerobic, binder, pressure sensitive and structural ad...view more CN136 is an amine-modified version of bisphenol A based epoxy acrylate providing a good balance of water properties, high reactivity and exceptionally fast cure. Suggested applications are adhesives, anaerobic, binder, pressure sensitive and structural adhesives, coatings, floor, metal, paper and plastic adhesives, electronics, inks, flexo, gravure, offset and screen Inks. view less | |
| Performax™ 4388 | Lubrizol Advanced Materials, Inc. | Performax™ 4388 is a high performance compound that provides an excellent balance of flexibility. This compound forms a soft, flexible film which gives excellent flexibility to a variety of substrates. Performax™ 4388 can be applied using all traditional ...view more Performax™ 4388 is a high performance compound that provides an excellent balance of flexibility. This compound forms a soft, flexible film which gives excellent flexibility to a variety of substrates. Performax™ 4388 can be applied using all traditional techniques such as knife coating and Meyer rod applicators. Patterned effects can also be achieved with this compound using rotary screen, gravure, or hand applied stencils and screens. Depending on the performance needs, single or multiple coats of the compound can be applied if needed. Suggested drying temperatures are 250F-300F, and a curing temperature of 325F-350F for best wash durability. A fluorochemical water repellent finish can be applied after the Performax coating for improved performance and durability. view less | |
| Domide G-5022 | Kukdo Chemical Co., Ltd. | Domide G-5022 is a reactive polyamide resin which shows excellent adhesion, toughness, water and chemical resistance as a curing agent for epoxy coatings and adhesives. It is particularly designed for use in solvent-based surface coatings. | |
| PanTINT® 87B1250 | Pan Technology Inc. | PanTINT® 87B1250 is a concentrated dispersion of Milori Blue in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name B 27. PanTINT® 87 Colorants...view more PanTINT® 87B1250 is a concentrated dispersion of Milori Blue in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name B 27. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87N1577 | Pan Technology Inc. | PanTINT® 87N1577 is a concentrated dispersion of Burnt Sienna in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name BR 7. PanTINT® 87 Colorant...view more PanTINT® 87N1577 is a concentrated dispersion of Burnt Sienna in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name BR 7. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87N1582 | Pan Technology Inc. | PanTINT® 87N1582 is a concentrated dispersion of Raw Umber in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name BR7. PanTINT® 87 Colorants ha...view more PanTINT® 87N1582 is a concentrated dispersion of Raw Umber in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name BR7. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87R1601 | Pan Technology Inc. | PanTINT® 87R1601 is a concentrated dispersion of Red Oxide Light in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name R 101. PanTINT® 87 Colo...view more PanTINT® 87R1601 is a concentrated dispersion of Red Oxide Light in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name R 101. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87R1602 | Pan Technology Inc. | PanTINT® 87R1602 is a concentrated dispersion of Red Oxide Medium in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name R 101. PanTINT® 87 Col...view more PanTINT® 87R1602 is a concentrated dispersion of Red Oxide Medium in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name R 101. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87V1801 | Pan Technology Inc. | PanTINT® 87V1801 is a concentrated dispersion of Carbazole Violet in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name V 23. PanTINT® 87 Colo...view more PanTINT® 87V1801 is a concentrated dispersion of Carbazole Violet in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name V 23. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87Y1406 | Pan Technology Inc. | PanTINT® 87Y1406 is a concentrated dispersion of Yellow Oxide in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name Y 42. PanTINT® 87 Colorant...view more PanTINT® 87Y1406 is a concentrated dispersion of Yellow Oxide in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name Y 42. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87Y1477 | Pan Technology Inc. | PanTINT® 87Y1477 is a concentrated dispersion of Hansa Yelllow in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name Y 74. PanTINT® 87 Coloran...view more PanTINT® 87Y1477 is a concentrated dispersion of Hansa Yelllow in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name Y 74. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| UCECOAT® 2806 | Allnex | UCECOAT® 2806 is a very low viscosity and high-performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO- free. It is characterized by a low mean part...view more UCECOAT® 2806 is a very low viscosity and high-performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO- free. It is characterized by a low mean particle size associated with an excellent colloidal stability alone and in the presence of pigments. Its polymer composition was optimized for high reactivity as well as low migration potential. It contains essentially oligomers and polymers having a molecular weight above 500 Daltons with acrylic double bound functionality equal to or greater than 6. It is easily water redispersible and tacky after water evaporation but before cure. view less | Request Sample |
| UROTUF® L522-W-40 | Polynt Composites | UROTUF® L522-W-40 is an anionic stabilized aliphatic urethane polymer presented with 40% solids in water. It can be used in plastic coatings, leather coatings, clear or pigmented coatings, and air-dry, force-cure and baked coatings. This product can be cr...view more UROTUF® L522-W-40 is an anionic stabilized aliphatic urethane polymer presented with 40% solids in water. It can be used in plastic coatings, leather coatings, clear or pigmented coatings, and air-dry, force-cure and baked coatings. This product can be cross linked, and features good chemical, solvent, and UV-resistance. view less | |
| PanTINT® 87N1535 | Pan Technology Inc. | PanTINT® 87N1535 is a concentrated dispersion of Burnt Umber in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name BR 7. PanTINT® 87 Colorants...view more PanTINT® 87N1535 is a concentrated dispersion of Burnt Umber in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name BR 7. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87Q1901 | Pan Technology Inc. | PanTINT® 87Q1901 is a concentrated dispersion of DNA Orange in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name OR 5. PanTINT® 87 Colorants ...view more PanTINT® 87Q1901 is a concentrated dispersion of DNA Orange in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name OR 5. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87Q1979 | Pan Technology Inc. | PanTINT® 87Q1979 is a concentrated dispersion of Diarylide Orange in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name OR 34. PanTINT® 87 Col...view more PanTINT® 87Q1979 is a concentrated dispersion of Diarylide Orange in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name OR 34. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87R1630 | Pan Technology Inc. | PanTINT® 87R1630 is a concentrated dispersion of Quinacridone Red in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name V 19. PanTINT® 87 Colo...view more PanTINT® 87R1630 is a concentrated dispersion of Quinacridone Red in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name V 19. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87V1810 | Pan Technology Inc. | PanTINT® 87V1810 is a concentrated dispersion of Qinacridone Violet in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name V 19. PanTINT® 87 Co...view more PanTINT® 87V1810 is a concentrated dispersion of Qinacridone Violet in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name V 19. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87W1150 | Pan Technology Inc. | PanTINT® 87W1150 is a concentrated dispersion of Titanium Dioxide in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name WH 6. PanTINT® 87 Colo...view more PanTINT® 87W1150 is a concentrated dispersion of Titanium Dioxide in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name WH 6. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87Y1430 | Pan Technology Inc. | PanTINT® 87Y1430 is a concentrated dispersion of Isoindoline Yellow in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name Y 139. PanTINT® 87 C...view more PanTINT® 87Y1430 is a concentrated dispersion of Isoindoline Yellow in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name Y 139. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| Voxtar™ M100 | Perstorp | Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100% renewable content and is used in UV-curable...view more Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ M50 | Perstorp | Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% renewable content and is used in UV-curable...view more Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ T100 | Perstorp | Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100% renewable content and is used in UV-curable...view more Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ T50 | Perstorp | Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% renewable content and is used in UV-curable...view more Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| PanTINT® 87K1362 | Pan Technology Inc. | PanTINT® 87K1362 is a concentrated dispersion of Bone Black in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and stains. This product has the C.I. Name BR 9. PanTINT® 87 Colorants have exceptionally ...view more PanTINT® 87K1362 is a concentrated dispersion of Bone Black in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and stains. This product has the C.I. Name BR 9. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87Y1420 | Pan Technology Inc. | PanTINT® 87Y1420 is a concentrated dispersion of Monoazo Yellow in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name Y 97. PanTINT® 87 Colora...view more PanTINT® 87Y1420 is a concentrated dispersion of Monoazo Yellow in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name Y 97. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| HIKOTACK P-120S | Kolon | HIKOTACK P-120S is pale yellow thermoplastic resin which is primarily used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-120S can be also used as water repellent agent, concrete curing agent, and binder for asphalt. | |
| PanTINT® 87R1682 | Pan Technology Inc. | PanTINT® 87R1682 is a concentrated dispersion of Red Oxide Medium Dark in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name R 101. PanTINT® 8...view more PanTINT® 87R1682 is a concentrated dispersion of Red Oxide Medium Dark in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name R 101. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87R1600C | Pan Technology Inc. | PanTINT® 87R1600C is a concentrated dispersion of Transparent Red Iron Oxide in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name R 101. PanT...view more PanTINT® 87R1600C is a concentrated dispersion of Transparent Red Iron Oxide in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name R 101. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87R1664 | Pan Technology Inc. | PanTINT® 87R1664 is a concentrated dispersion of Toluidene Red Medium Light in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name R 3. PanTINT...view more PanTINT® 87R1664 is a concentrated dispersion of Toluidene Red Medium Light in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name R 3. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87Y1400C | Pan Technology Inc. | PanTINT® 87Y1400C is a concentrated dispersion of red shade Transparent Yellow Iron Oxide in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Nam...view more PanTINT® 87Y1400C is a concentrated dispersion of red shade Transparent Yellow Iron Oxide in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name Y 42. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87Y1403 | Pan Technology Inc. | PanTINT® 87Y1403 is a concentrated dispersion of green shade Transparent Yellow Iron Oxide in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Na...view more PanTINT® 87Y1403 is a concentrated dispersion of green shade Transparent Yellow Iron Oxide in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name Y 42. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| TEGO® Dispers 655 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 655 is pigment-wetting and dispersing additive. It is a clear to a slighlty hazy brownish liquid modified polyether with groups of high pigment affinity. This product is used for universal colorants, waterborne, solventborne, radiation-curin...view more TEGO® Dispers 655 is pigment-wetting and dispersing additive. It is a clear to a slighlty hazy brownish liquid modified polyether with groups of high pigment affinity. This product is used for universal colorants, waterborne, solventborne, radiation-curing formulations. TEGO® Dispers 655 stabilizes aluminum pigments and improves colorant acceptance of solventborne paints. It has the highest viscosity reduction with inorganic pigments and fillers and good reduction with organic and carbon blacks. It also has good color intensity/gloss with inorganic pigments and fillers. view less | Request Sample |
| PanTINT® 87B1289 | Pan Technology Inc. | PanTINT® 87B1289 is a concentrated dispersion of red shade Phthalo Blue based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. It is redder than PanTINT® 87B1204 in tin...view more PanTINT® 87B1289 is a concentrated dispersion of red shade Phthalo Blue based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. It is redder than PanTINT® 87B1204 in tint and masstone, less transparent and significantly more economical to use. This product has the C.I. Name B 15:2. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87R1620 | Pan Technology Inc. | PanTINT® 87R1620 is a concentrated dispersion of yellow shade Naphthol Red in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name R 188. PanTIN...view more PanTINT® 87R1620 is a concentrated dispersion of yellow shade Naphthol Red in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name R 188. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| PanTINT® 87R1625 | Pan Technology Inc. | PanTINT® 87R1625 is a concentrated dispersion of blue shade Naphthol Red in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name R 170. PanTINT®...view more PanTINT® 87R1625 is a concentrated dispersion of blue shade Naphthol Red in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. This product has the C.I. Name R 170. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic...view more HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| Baybond® PU 403 | Covestro | Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond...view more Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond PU® 403 have excellent film-forming properties, and very good adhesion. The mechanical properties of Baybond® PU 403 are improved by post-curing at 150ºC or above for 30 minutes. As with any product, Baybond® PU 403 polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| SiSiB® PC1220 | SiSiB SILICONES | SiSiB® PC1220 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing adhesion and elougation and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass, mineral and metal surfaces; as reinforcements, fillers and substrates; and with resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. It can be used in waterborne...view more SiSiB® PC1220 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing adhesion and elougation and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass, mineral and metal surfaces; as reinforcements, fillers and substrates; and with resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. It can be used in waterborne systems such as latex coatings, adhesives, and sealants; as an adhesion promoters in polysulfide, polyvinyl chloride plastisol, silicone two-part urethanes and epoxy adhesives and sealants; as an additive for cold-curing phenolic and furan foundry resins to improve the flexural strength of the sand-resin composites; as a starting material in the synthesis of amino-functional silicones; or as an adhesion promoters in one-part silylated urethane adhesives and sealants. view less | |
| CN2207 | Sartomer Americas | CN2207 is a polyester acrylate oligomer designed for UV/EB lithographic inks. It exhibits good pigment wetting characteristics and will yield inks with high viscosity and low tack. On-press performance is enhanced because of the good water balance and ver...view more CN2207 is a polyester acrylate oligomer designed for UV/EB lithographic inks. It exhibits good pigment wetting characteristics and will yield inks with high viscosity and low tack. On-press performance is enhanced because of the good water balance and very fast cure speed. Suggested applications are coatings, metal and wood coatings, litho, offset and screen inks. view less | |
| EFKA® PB 2001 | BASF Formulation Additives | EFKA® PB 2001 is a silicone-free defoamer for non-aqueous coatings, printing inks, and especially for high viscous coatings based on 2-pack epoxy, unsaturated polyester, and PUR systems. It is a solution of vinyl polymer in organic solvents. EFKA® PB 2001...view more EFKA® PB 2001 is a silicone-free defoamer for non-aqueous coatings, printing inks, and especially for high viscous coatings based on 2-pack epoxy, unsaturated polyester, and PUR systems. It is a solution of vinyl polymer in organic solvents. EFKA® PB 2001 is used in nitrocellulose lacquers, particularly those applied on curtain coaters, 1- or 2-component acid curing wood coatings, particularly fast drying types applied on curtain coaters, acrylic resin finishes, air drying epoxy resin paints and unsaturated polyester. The paint industry uses defoamers to ensure that air bubbles occurring during application of lacquers and paints can escape from the film while still wet. The formation of craters is thus substantially eliminated. One must differentiate between: bubbles which originate from the substrate (wood and paper are typical examples), and bubbles which may be generated in the paint by pumping, rolling, airless spraying or curtain coating. view less | |
| CRYLCOAT® 2679-6 | Allnex | CRYLCOAT® 2679-6 is a high reactive carboxyl functional polyester resin for use with 5% HAA hardener in low bake (10 min x 160°C) formulations for architectural applications. Coatings based on CRYLCOAT® 2679-6 exhibit good outdoor durability and improved ...view more CRYLCOAT® 2679-6 is a high reactive carboxyl functional polyester resin for use with 5% HAA hardener in low bake (10 min x 160°C) formulations for architectural applications. Coatings based on CRYLCOAT® 2679-6 exhibit good outdoor durability and improved water-spot resistance. view less | Request Sample |
| SAFIC-CHEM TI | Safic-Alcan | SAFIC-CHEM TI is a mono-functional isocyanate used in moisture-curing one or two components Paints, Adhesives, and Sealants. SAFIC-CHEM TI reacts with water, giving off carbon dioxide and resulting in the formation of reaction products (inert amide) which...view more SAFIC-CHEM TI is a mono-functional isocyanate used in moisture-curing one or two components Paints, Adhesives, and Sealants. SAFIC-CHEM TI reacts with water, giving off carbon dioxide and resulting in the formation of reaction products (inert amide) which are soluble in conventional solvent-based paints formulations. Approximately 12g of stabilizer is theoretically required for reaction with 1g of water. The suggested use level is between 0.5% and 4.0%, for 0.05% to 0.3% moisture. Experience has shown, however, that the reaction is more effective in the presence of an excess of SAFIC-CHEM TI. view less | Request Sample |
| PanTINT® 87B1204 | Pan Technology Inc. | PanTINT® 87B1204 is a concentrated dispersion of red shade Phthalo Blue in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. It is cleaner and more transparent than PanTIN...view more PanTINT® 87B1204 is a concentrated dispersion of red shade Phthalo Blue in a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. It is cleaner and more transparent than PanTINT® 87B1289. This product has the C.I. Name B 15:2. PanTINT® 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability. They can be used in many solvent thinned ambient cured paints and low temperature cure baking finishes. view less | |
| TEGO® Wet 500 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 500 is a highly effective substrate wetting additive with good flow promotion. It is a clear liquid non-ionic organic surfactant ideal for spray application. It is universally applicable, silicone-free, and has low foam. It is suitable for clear coat, pigmented, radiation-curing, and waterborne...view more TEGO® Wet 500 is a highly effective substrate wetting additive with good flow promotion. It is a clear liquid non-ionic organic surfactant ideal for spray application. It is universally applicable, silicone-free, and has low foam. It is suitable for clear coat, pigmented, radiation-curing, and waterborne systems. TEGO® Wet 500's addition to the coating can be as supplied or as a predilution. It is suitable for for addition during the let-down stage, but is recommended during the grind stage for pigmented formulations. view less | Request Sample |
| MIRAMER M122 | Rahn USA Corp. | MIRAMER M122 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, industrial coatings and plastic coatings. It exhibits low shrinkage, high flexibility, hi...view more MIRAMER M122 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, industrial coatings and plastic coatings. It exhibits low shrinkage, high flexibility, high water resistance and good weather resistance. view less | Request Sample |
| TROYSOL™ Z370 | Arxada – Troy Corporation | TROYSOL™ Z370 is a high performance substrate wetting and mar/slip additive for solvent, water-reducible and aqueous systems. It improves the wetting of low surface energy and contaminated substrates, resulting in uniform film coverage. This product enhances surface flow and leveling and stabilizes surface tension gradients upon application and during care. It also helps prevent surface defects such as craters, pinholes, and orange peel. The surface slip is increased and the gloss is improved when used in most coating systems. This product can be used in a variety of applications, including automotive, transportation, OEM, general industrial, furniture finishes, radiation curable...view more TROYSOL™ Z370 is a high performance substrate wetting and mar/slip additive for solvent, water-reducible and aqueous systems. It improves the wetting of low surface energy and contaminated substrates, resulting in uniform film coverage. This product enhances surface flow and leveling and stabilizes surface tension gradients upon application and during care. It also helps prevent surface defects such as craters, pinholes, and orange peel. The surface slip is increased and the gloss is improved when used in most coating systems. This product can be used in a variety of applications, including automotive, transportation, OEM, general industrial, furniture finishes, radiation curable, printing inks and over print varnishes where wetting and/or block resistance is required. view less | Request Sample |
| BRC-841 | Bomar, formerly Dymax Oligomers & Coatings | BRC-841 is a low-molecular-weight, difunctional, hydrophobic urethane acrylate that can be effectively formulated for steel and various plastic hard coatings. The resulting hard, tough film makes an effective non-yellowing protective single-coating. The low water absorption and alkaline resistance make BRC-841 ideal for the following industries: aerospace, automotive, appliances, cosmetic, electronic, industrial, medical devices, metal finishing, and UV-curable...view more BRC-841 is a low-molecular-weight, difunctional, hydrophobic urethane acrylate that can be effectively formulated for steel and various plastic hard coatings. The resulting hard, tough film makes an effective non-yellowing protective single-coating. The low water absorption and alkaline resistance make BRC-841 ideal for the following industries: aerospace, automotive, appliances, cosmetic, electronic, industrial, medical devices, metal finishing, and UV-curable inks and coatings. view less | |
| NACURE® 2558 | King Industries, Inc. | NACURE® 2558 is a partially amine counterbalanced para-Toluenesulfonic acid (p-TSA) stimulant that appears as a clear, straw liquid. It mixes a higher boiling solvent with a higher temperature dissociating amine to create a stimulant that is especially effective in controlling wrinkling, popping and blistering in high solids coatings. It is soluble in alcohols, water, glycols, glycol ethers, and is insoluble in aliphatic and aromatic hydrocarbons, esters, and ketones. This product can be applied in automotive finishes, waterborne...view more NACURE® 2558 is a partially amine counterbalanced para-Toluenesulfonic acid (p-TSA) stimulant that appears as a clear, straw liquid. It mixes a higher boiling solvent with a higher temperature dissociating amine to create a stimulant that is especially effective in controlling wrinkling, popping and blistering in high solids coatings. It is soluble in alcohols, water, glycols, glycol ethers, and is insoluble in aliphatic and aromatic hydrocarbons, esters, and ketones. This product can be applied in automotive finishes, waterborne coatings, coil coatings, and general industrials. view less | |
| R-2180-2 | NuSil Silicone Technology 1 | R-2180-2 is a two-part silicone elastomer dispersed in xylene and two medium viscosity parts of this product blend easily in a 1:1 ratio (Part A:B). This coating is an ideal product to use for dip casting and heat-curing of thin elastomeric films. It tak...view more R-2180-2 is a two-part silicone elastomer dispersed in xylene and two medium viscosity parts of this product blend easily in a 1:1 ratio (Part A:B). This coating is an ideal product to use for dip casting and heat-curing of thin elastomeric films. It takes a minimum of 30 minutes to cure at an ambient temperature and humidity: 45 minutes @ 75°C (167°F), and 135 minutes @ 150°C (302°F). view less | |
| UROTUF® L522-G8W-40 | Polynt Composites | UROTUF® L522-G8W-40 is an anionic-stabilized aliphatic polyurethane polymer presented in a blend of dipropylene glycol dimethyl ether and water. This product can be used in plastic coatings, leather coatings, clear or pigmented coatings, and air-dry, forc...view more UROTUF® L522-G8W-40 is an anionic-stabilized aliphatic polyurethane polymer presented in a blend of dipropylene glycol dimethyl ether and water. This product can be used in plastic coatings, leather coatings, clear or pigmented coatings, and air-dry, force-cure or baked coatings. It can be cross-linked with polyaziridine, carbodiimide and epoxy resin, and features good chemical, solvent and UV-resistance. view less | |
| UCECOAT® 7690 | Allnex | UCECOAT® 7690 is a Tin free radiation curable polyurethane dispersion with an excellent outdoor durability. It can be used in varied exterior applications and on a wide array of substrates. The product is tack-free after water evaporation and has an excel...view more UCECOAT® 7690 is a Tin free radiation curable polyurethane dispersion with an excellent outdoor durability. It can be used in varied exterior applications and on a wide array of substrates. The product is tack-free after water evaporation and has an excellent water release. Because of its non-irritant nature and low viscosity, it can be applied safely by spray, roller and curtain coating. view less | Request Sample |
| CYMEL® 251 | Allnex | CYMEL® 251 Resin is a novel melamine-formaldehyde crossliknking agent of the mixed ether class. It possesses a lower level of alkylation then other mixed ethers, thus improving its adaptability to waterbone coating formulations. Waterbone systems based on...view more CYMEL® 251 Resin is a novel melamine-formaldehyde crossliknking agent of the mixed ether class. It possesses a lower level of alkylation then other mixed ethers, thus improving its adaptability to waterbone coating formulations. Waterbone systems based on CYMEL® 251 resin exhibit rapid cure response with improved water resistance compared with coatings based on conventional methylated melamine resins. In addition, coatings containing CYMEL® 251 resin maintain the excellent appearance properties charasteristic of mixed ether crosslinkers. view less | Request Sample |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...view more EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. view less | |
| EBECRYL® 244 | Allnex | EBECRYL® 244 is an aliphatic urethane diacrylate oligomer diluted with 10% of 1,6 hexanediol diacrylate (HDDA)(2) monomer. It is characterized by its light colour and good cure response. It s recommended for use in: flexible screen inks and coatings, Ligh...view more EBECRYL® 244 is an aliphatic urethane diacrylate oligomer diluted with 10% of 1,6 hexanediol diacrylate (HDDA)(2) monomer. It is characterized by its light colour and good cure response. It s recommended for use in: flexible screen inks and coatings, Light stable coatings, electrical insulation coatings, and coatings where a minimum of water absorption is desired (absorbs less than 1% water/24 hr. immersion). view less | Request Sample |
| EBECRYL® 246 | Allnex | EBECRYL® 246 is an aliphatic urethane diacrylate oligomer diluted with 10% of 1,6 hexanediol diacrylate (HDDA)(2) monomer. It is characterized by its light colour and good cure response. It s recommended for use in: flexible screen inks and coatings, Ligh...view more EBECRYL® 246 is an aliphatic urethane diacrylate oligomer diluted with 10% of 1,6 hexanediol diacrylate (HDDA)(2) monomer. It is characterized by its light colour and good cure response. It s recommended for use in: flexible screen inks and coatings, Light stable coatings, electrical insulation coatings, and coatings where a minimum of water absorption is desired (absorbs less than 1% water/24 hr. immersion). view less | Request Sample |
| HIKOTACK P-110S | Kolon | HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete c...view more HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete curing agent and binder for asphalt. view less | |
| CRYLCOAT® 2609-6 | Allnex | CRYLCOAT® 2609-6 is a high reactive, tribo active carboxyl functional polyester resin for use with 5% HAA hardener in low bake (12 min x 160°C object temperature) formulations for architectural applications. Coatings based on CRYLCOAT® 2609-6 are blooming...view more CRYLCOAT® 2609-6 is a high reactive, tribo active carboxyl functional polyester resin for use with 5% HAA hardener in low bake (12 min x 160°C object temperature) formulations for architectural applications. Coatings based on CRYLCOAT® 2609-6 are blooming resistant and exhibit improved outdoor durability and water-spot resistance. view less | Request Sample |
| EBECRYL® 875 | Allnex | EBECRYL® 875 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 875 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, p...view more EBECRYL® 875 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 875 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, polycarbonate and PVC. The water balance of this product allows inks based upon it to be run on press with low amounts of fountain solution: a key parameter for printing on non-absorbent substrates. EBECRYL® 875 also exhibits low odor. view less | Request Sample |
| BASONAT® HW 1000 | BASF Dispersions & Resins | BASONAT HW 1000 is a solvent free water-emulsifiable polyfunctional isocyanate based on HDI for crosslinking polymeric dispersions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. BASONAT HW 1000 is recommended for app...view more BASONAT HW 1000 is a solvent free water-emulsifiable polyfunctional isocyanate based on HDI for crosslinking polymeric dispersions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. BASONAT HW 1000 is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior Automotive OEM or refinish applications. view less | |
| Silane Coupling Agent KH-Si69 | Zhejiang Feidian Chemical Co., Ltd. | KH-Si69 is a pale yellow transparent liquid that is soluble in ethanol, acetone, benzene, toluene and other solvents. It is insoluble in water. KH-Si69 silane, is a bifunctional polysulfidic organosilane for the rubber industry defined chemically as Bis(3...view more KH-Si69 is a pale yellow transparent liquid that is soluble in ethanol, acetone, benzene, toluene and other solvents. It is insoluble in water. KH-Si69 silane, is a bifunctional polysulfidic organosilane for the rubber industry defined chemically as Bis(3-triethoxysilylpropyl)tetrasulfide. It is used to improve the reinforcing capability of fillers with silanol group on their surface, and also as an integral part of curing systems to improve crosslinking network properties. It has crosslinking and accelerator activity in rubber compounds as a silane coupling agent. view less | |
| LAROMER® PE 55 Aqua | BASF Dispersions & Resins | LAROMER PE 55 AQUA is a water-emulsifiable polyester acrylate for the formulation of energy curable coatings for wood, wood products, and plastic applications. An outstanding property of LAROMER PE 55 AQUA is its ability to bring out the natural grain and...view more LAROMER PE 55 AQUA is a water-emulsifiable polyester acrylate for the formulation of energy curable coatings for wood, wood products, and plastic applications. An outstanding property of LAROMER PE 55 AQUA is its ability to bring out the natural grain and color of wood. Coating formulations based on LAROMER PE 55 AQUA exhibit good elasticity and adhesion. They are highly reactive. The preferred methods of application are curtain coating, spraying, and rolling. view less | |
| EBECRYL® 657 | Allnex | EBECRYL® 657 is a polyester tetraacrylate developed specifically for ultraviolet light (UV) and electron beam (EB) cured lithographic ink formulations. It provides the proper hydrophilic-lipophilic balance necessary for lithography, good pigment wetting, ...view more EBECRYL® 657 is a polyester tetraacrylate developed specifically for ultraviolet light (UV) and electron beam (EB) cured lithographic ink formulations. It provides the proper hydrophilic-lipophilic balance necessary for lithography, good pigment wetting, and low misting. It can be blended with epoxy acrylates or EBECRYL® 436 or EBECRYL® 438 to increase cure speed. EBECRYL® 657 is recommended for: lithographic inks and varnishes, coatings on paper, metal, and plastic, and pigment grinding vehicles. view less | Request Sample |
| DOUBLEMER® BPA2EODMA | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® BPA2EODMA is a highly reactive crosslinker, due to its difunctional methacrylate group. The copolymerization can be carried out with conventional peroxides or irradiation. DOUBLEMER® BPA2EODMA provides good adhesion, flexibility, low shrinkage,...view more DOUBLEMER® BPA2EODMA is a highly reactive crosslinker, due to its difunctional methacrylate group. The copolymerization can be carried out with conventional peroxides or irradiation. DOUBLEMER® BPA2EODMA provides good adhesion, flexibility, low shrinkage, impact strength, water/chemical resistance and high refractive index. This product is recommended for use in the following applications: coatings for paper, wood and plastics; ophthalmic lenses; dry lithographic inks; fast curing coatings, inks and clear varnishes; scratch and solvent resistant coatings; improve adhesive strength; concrete polymers; and electronic photoresists. view less | |
| LAROMER® PO 8982 | BASF Dispersions & Resins | LAROMER PO 8982 is a polyether-modified acrylic resin. It can be diluted with up to 25% water without the development of clouds. This covers a broad viscosity range and allows formulations for roller or spray applications. Combined with energy curable emu...view more LAROMER PO 8982 is a polyether-modified acrylic resin. It can be diluted with up to 25% water without the development of clouds. This covers a broad viscosity range and allows formulations for roller or spray applications. Combined with energy curable emulsions such as LAROMER PE 22 WN or LAROMER PE 55 WN, high solids adhesive primers for parquet flooring can be formulated. view less | |
| SYLOSIV® A 3 | GRACE | SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® A 3 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are twocomponent polyurethane systems, moisture-curable...view more SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® A 3 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are twocomponent polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems, and as cosmetic ingredient. view less | |
| SYLOSIV® A 3 | Univar Solutions | SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® A 3 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are twocomponent polyurethane systems, moisture-curable...view more SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® A 3 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are twocomponent polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems, and as cosmetic ingredient. view less | Request Sample |
| Desmodur® BL 3475 BA/SN | Covestro | Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack bakin...view more Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack baking polyurethane coatings with a low baking temperature. Used in the formulation of high-quality industrial coatings, especially for cans and tubes. The product can also be used as an additive to improve the reactivity, flexibility and adhesion of conventional baking systems. view less | |
| Jaylink® 106E | Bomar, formerly Dymax Oligomers & Coatings | Jaylink® 106E polymerizable cellulosic is an acrylamidomethyl-substituted cellulose ester polymer. Due to its high degree of acrylamide substitution, formulations using JL-106E cure very rapidly in response to UV/EB. Resulting films have excellent abrasion, chemical, and impact resistance. The hydrophobic and hydrophilic segments of 106E make it an excellent compatibilizer for materials of differing polarity. JL-106E is used for its thixotropic characteristics, which are particularly useful in improving UV ...view more Jaylink® 106E polymerizable cellulosic is an acrylamidomethyl-substituted cellulose ester polymer. Due to its high degree of acrylamide substitution, formulations using JL-106E cure very rapidly in response to UV/EB. Resulting films have excellent abrasion, chemical, and impact resistance. The hydrophobic and hydrophilic segments of 106E make it an excellent compatibilizer for materials of differing polarity. JL-106E is used for its thixotropic characteristics, which are particularly useful in improving UV ink holdout on porous substrates, without sacrificing cured properties. This material is INCI listed for use in the cosmetic industry. view less | |
| SYLOSIV® K 300 | GRACE | SYLOSIV® K 300 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve, with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® K 300 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are two-component polyurethane systems, moisture-curable...view more SYLOSIV® K 300 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve, with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® K 300 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are two-component polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems, and as cosmetic ingredient. view less | |
| R-2180 | NuSil Silicone Technology 1 | R-2180 is a two-part silicone elastomer dispersed in xylene, and two medium viscosity parts of this product blend easily in a 1:1 ratio (Part A:B). This ice phobic coating is an ideal product to use for dip casting and heat-curing of thin elastomeric fil...view more R-2180 is a two-part silicone elastomer dispersed in xylene, and two medium viscosity parts of this product blend easily in a 1:1 ratio (Part A:B). This ice phobic coating is an ideal product to use for dip casting and heat-curing of thin elastomeric films. It can also be used as a coating to protect certain components from ice adhesion. view less | |
| JEFFAMINE® ED2003 POLYETHERDIAMINE | Huntsman Performance Products | Polyether diamine based on a predominantly polyethylene oxide backbone. This imparts complete water solubility. | |
| K-KAT® XK-639 | King Industries, Inc. | K-KAT® XK-639 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure ...view more K-KAT® XK-639 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure time, non-yellowing, and gloss retention. It is soluble in esters, aromatic hydrocarbons, and ketones. It is insoluble in water. This product is 50% active in isopropanol, weighs 7.6 lbs per gallon, and has a specific gravity of 0.91 g/ml. view less | |
| K-KAT® XK-635 | King Industries, Inc. | K-KAT® XK-635 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure ...view more K-KAT® XK-635 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure time, non-yellowing, and gloss retention. It is soluble in esters, aromatic hydrocarbons, and ketones. It is insoluble in water. This product is 100% active, weighs 9.5 lbs per gallon, and has a specific gravity of 1.14 g/ml. view less | |
| ACMO | Rahn USA Corp. | ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the a...view more ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. ACMO can be applied to the following applications: screen inks and varnishes; plastic coatings; laminating adhesives; printed circuit boards; and industrial coatings. view less | Request Sample |
| ANTI-TERRA®-U 100 | BYK | ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U , the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to provide excellent gelation of organophilic bentonites. ANTI-TERR...view more ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U , the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to provide excellent gelation of organophilic bentonites. ANTI-TERRA-U 100 is effective for wetting and dispersing colored pigments, both organic and inorganic. No adverse effect has been observed on the pot-life of two-component systems or on the dry time of oxidative cure binders. ANTI-TERRA-U 100 can also be used as a wetting and suspending additive in water soluble coatings. view less | Request Sample |
| DOUBLEMER® 1702 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 1702 is a bisphenol A epoxy acrylate oligomer modified with fatty acid. This resin is characterized by excellent pigment wetting, good flow and leveling. It is designed for use in ultraviolet light (UV) or electron beam (EB) coating systems. The cured films of DOUBLEMER® 1702 exhibit high gloss, improved water resistance and excellent chemical resistance properties similar to the typical epoxy resin. Formulated UV/EB curable...view more DOUBLEMER® 1702 is a bisphenol A epoxy acrylate oligomer modified with fatty acid. This resin is characterized by excellent pigment wetting, good flow and leveling. It is designed for use in ultraviolet light (UV) or electron beam (EB) coating systems. The cured films of DOUBLEMER® 1702 exhibit high gloss, improved water resistance and excellent chemical resistance properties similar to the typical epoxy resin. Formulated UV/EB curable products containing DOUBLEMER® 1702 may be applied via lithographic, screen, direct or reverse roll and curtain coating methods. This product is recommended for use in: clear coatings for paper, overprint varnishes, lithographic ink vehicles, screen ink vehicles, vehicles for metal decorating inks and clear coatings and coatings for rigid and flexible plastics. view less | |
| BRC-843 | Bomar, formerly Dymax Oligomers & Coatings | BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substrates use-life. The low water absorption and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, cosmetic, electronic, industrial, medical device, metal finishing, and UV-curable...view more BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substrates use-life. The low water absorption and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, cosmetic, electronic, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-843 exhibits retention of mechanical properties after exposure to high temperatures (200°C for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-843 also shows excellent adhesion to ABS, PVC, PMMA, and polystyrene. view less | |
| Benox® L-50E | UNITED INITIATORS GMBH & CO KG | Benox® L-50E, in the form of a smooth water white low viscosity fire resistant creamy paste, is a fine dispersion of dibenzoyl peroxide. It can be readily dissolved in monomers and resins, is less hazardous, and is easier to use than dry or technical form...view more Benox® L-50E, in the form of a smooth water white low viscosity fire resistant creamy paste, is a fine dispersion of dibenzoyl peroxide. It can be readily dissolved in monomers and resins, is less hazardous, and is easier to use than dry or technical forms of dibenzoyl peroxide (provided the water content and plasticizer are not objectionable. Benox® L-50E is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, unsaturated polyester/vinyl ester resins, and copolymers of these resins. It can also be used in two-part adhesive systems, based on methacrylate or polyester resins, where the creamy consistency allows uniform mixing of the components. view less | |
| RHOPLEX™ HG-706 | Univar Solutions | RHOPLEX™ HG-706 is an all acrylic emulsion designed for interior and exterior VOC-compliant gloss and semigloss enamels, allowing formulators to produce high performance coatings at 50 g/l VOC. The combination of an all-acrylic backbone and ambient-cure c...view more RHOPLEX™ HG-706 is an all acrylic emulsion designed for interior and exterior VOC-compliant gloss and semigloss enamels, allowing formulators to produce high performance coatings at 50 g/l VOC. The combination of an all-acrylic backbone and ambient-cure crosslinking technology provides superior performance in formulations ranging from 50 to 150 g/l VOC. Enamels based on RHOPLEX™ HG-706 emulsion provide excellent adhesion, block, and stain removal. view less | Request Sample |
| BRC-443 | Bomar, formerly Dymax Oligomers & Coatings | BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective low-yellowing, protective single-coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable...view more BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective low-yellowing, protective single-coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443 exhibits retention of mechanical properties after exposure to high temperatures (200°C for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443 also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene. view less | |
| BRC-443D | Bomar, formerly Dymax Oligomers & Coatings | BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable...view more BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443D exhibits retention of mechanical properties after exposure to high temperatures (200°C for at least 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443D also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene. view less | |
| RAYCRYL® 708E | EPS Materials | RAYCRYL® 708E is a clear anionic all-acrylic emulsion intended for low VOC coatings on porch and floor enamels. This product is primarily used for sealers and stains on a wide variety of surfaces and provides UV protection for outdoor woods and cement. It...view more RAYCRYL® 708E is a clear anionic all-acrylic emulsion intended for low VOC coatings on porch and floor enamels. This product is primarily used for sealers and stains on a wide variety of surfaces and provides UV protection for outdoor woods and cement. It has an exclusive core-shell technology that provides water resistance after it cures and hardens. view less | Request Sample |
| RAYCRYL® 708E | Specialty Polymers, Inc. | RAYCRYL® 708E is a clear anionic all-acrylic emulsion intended for low VOC coatings on porch and floor enamels. This product is primarily used for sealers and stains on a wide variety of surfaces and provides UV protection for outdoor woods and cement. It...view more RAYCRYL® 708E is a clear anionic all-acrylic emulsion intended for low VOC coatings on porch and floor enamels. This product is primarily used for sealers and stains on a wide variety of surfaces and provides UV protection for outdoor woods and cement. It has an exclusive core-shell technology that provides water resistance after it cures and hardens. view less | |
| RAYCRYL® 918K | Specialty Polymers, Inc. | RAYCRYL® 918K is an anionic reactive acrylic emulsion for catalyzed systems. This product has a crosslinkable chemical build up that allows it to block and resist water, along with outdoor stability. RAYCRYL® 918K has a hydroxyl utility that allows it to react to isocyanate and gives it chemical resistance. The primary use for this product is to be used as a topcoat and provide surfaces such as cement and wood with chemical, water and UV ...view more RAYCRYL® 918K is an anionic reactive acrylic emulsion for catalyzed systems. This product has a crosslinkable chemical build up that allows it to block and resist water, along with outdoor stability. RAYCRYL® 918K has a hydroxyl utility that allows it to react to isocyanate and gives it chemical resistance. The primary use for this product is to be used as a topcoat and provide surfaces such as cement and wood with chemical, water and UV resistance. view less | |
| KBM-303 | Shin-Etsu Silicones of America | KBM-303 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water resistance, and heat resistance of complex materials containing inorganic fillers and organic polymers. It is suitable for a wide variety of heat curable...view more KBM-303 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water resistance, and heat resistance of complex materials containing inorganic fillers and organic polymers. It is suitable for a wide variety of heat curable systems like epoxies, phenolics, melamines, and urethanes, as well as thermoplastic elastomers like polycarbonate, nylon, polystyrene, PET, PBT, and ABS. Epoxysilanes have replaced aminosilanes in several applications, resulting in significantly improved performance. KBM-303 works well with most of the common inorganic substrates such as glass, silica, mica, alumina, clay, and talc, as well as most metals, such as iron and copper. view less | |
| KBM-403 | Shin-Etsu Silicones of America | KBM-403 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water resistance, and heat resistance of complex materials containing inorganic fillers and organic polymers. It is suitable for a wide variety of heat curable...view more KBM-403 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water resistance, and heat resistance of complex materials containing inorganic fillers and organic polymers. It is suitable for a wide variety of heat curable systems like epoxies, phenolics, melamines, and urethanes, as well as thermoplastic elastomers like polycarbonate, nylon, polystyrene, PET, PBT, and ABS. Epoxysilanes have replaced aminosilanes in several applications, resulting in significantly improved performance. KBM-403 works well with most of the common inorganic substrates such as glass, silica, mica, alumina, clay, and talc, as well as most metals, such as iron and copper. view less | |
| LumiSet™ LSR-141 | Bomar, formerly Dymax Oligomers & Coatings | LumiSet™ LSR-141 is a urethane methacrylate polymeric resin designed for use in base and color coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-141 is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of adhesion and durability from nail gels while also achieving a tack-free finish, without the need for UV ...view more LumiSet™ LSR-141 is a urethane methacrylate polymeric resin designed for use in base and color coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-141 is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of adhesion and durability from nail gels while also achieving a tack-free finish, without the need for UV or LED lamps. The combination of excellent adhesion, flexibility, and toughness offers formulators an alternative to other leachable plasticizers or potentially toxic adhesion promoters. The excellent adhesion of LSR-141 allows for the combination of color and base coats into one step. Base and color coats formulated with LSR-141 should also be paired with a hydrophobic top coat due to the hydrophilic nature of LSR-141. LSR-141 is INCI registered, and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators. view less | |
| Gasil® HP880 | PQ Corporation | Gasil® HP880 is a large particle, high performance, organically treated silica gel specifically designed for solvent based coatings such as wood flooring and furniture. Use of Gasil® HP880 has benefits of optimal matting efficiency from ultra high pore vo...view more Gasil® HP880 is a large particle, high performance, organically treated silica gel specifically designed for solvent based coatings such as wood flooring and furniture. Use of Gasil® HP880 has benefits of optimal matting efficiency from ultra high pore volume and controlled particle size distribution. Suitable in acetone rich systems, has ease of dispersion and film clarity while also allowing for raw material cost savings. view less | |
| Gasil® IJ1 | PQ Corporation | Gasil® IJ1 is a general purpose silica gel designed as an effective matting agent for coil, general industrial and other surface coatings. Gasil® IJ1 benefits include optimal matting efficiency from a controlled particle size distribution, product consist...view more Gasil® IJ1 is a general purpose silica gel designed as an effective matting agent for coil, general industrial and other surface coatings. Gasil® IJ1 benefits include optimal matting efficiency from a controlled particle size distribution, product consistency and ease of dispersion. Also film clarity and raw material cost savings. view less | |
| Gasil® IJ45 | PQ Corporation | Gasil® IJ45 is a general purpose silica gel designed as an effective matting agent for coil, general industrial and other surface coatings. It provides excellent matting combined with minimal effect on viscosity. Gasil® IJ45 has optimal matting efficiency...view more Gasil® IJ45 is a general purpose silica gel designed as an effective matting agent for coil, general industrial and other surface coatings. It provides excellent matting combined with minimal effect on viscosity. Gasil® IJ45 has optimal matting efficiency from a controlled particle size distribution, product consistency and ease of dispersion, has film clarity and raw material cost savings. view less | |
| SILLITIN V 88 | Hoffmann Mineral | SILLITIN V 88 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN Z 89 | Hoffmann Mineral | SILLITIN Z 89 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| Rheolaser™ Coating | Formulaction Inc. | The Rheolaser™ Coating is a non-invasive, optical technique used to analyze the drying profiles of thing films. The device uses Diffusing Wave Spectroscopy to detect the Browniam motion of the particles inside of a thin film sample as it dries in order to...view more The Rheolaser™ Coating is a non-invasive, optical technique used to analyze the drying profiles of thing films. The device uses Diffusing Wave Spectroscopy to detect the Browniam motion of the particles inside of a thin film sample as it dries in order to give profile evolution and characteristic drying times. view less |  |
| Gasil® HP335 | PQ Corporation | Gasil® HP335 features a small particle size that is carefully controlled combined with a high internal pore volume. In addition Gasil® HP335 has high purity and specially designed organic surface treatment that makes it the product of choice for many appl...view more Gasil® HP335 features a small particle size that is carefully controlled combined with a high internal pore volume. In addition Gasil® HP335 has high purity and specially designed organic surface treatment that makes it the product of choice for many applications. view less |
